MSS No data exists. Is working - or not

Hi,
We have configured the MSS EMBORGCH and it is working or kind of working.
We have added a new selection called Furture employess, so the manager are able to see the future employees.
If there is no future employee, then the user gets this error: "No data exists for user XXXXXX in hierarchy MSSBIZVIEW".
And then if the user Log off the portal, then next time the manager log on. This message is shown: "No data exists for user XXXXXX in hierarchy MSSBIZVIEW". and the drop down selections are empty.
How to avoid this?
Kim

Hi
The problem is, that we have created a new view called "Future Employees". When you have future employees, this is working fine.
But if you do not have future employees, you will get this error message. If you then log out of the portal then the next time you log in, you will see this error and the dropdowns with the Views are empty, and you cannot navigate.
I just want the view to be empty and the navigation to work.
Right now, we are showing the manager, just to avoid this situation.
Kim

Similar Messages

Data exist in PA0008 and not in Employee (Attributes) 0EMPLOYEE_ATTR

I am using standard reports from the cube 0PA_C01 (Headcount with personnel actions) but i am experiencing some data are not coming in the master data 0EMPLOYEE_ATTR
specially these fields
Pay scale type
Pay scale area
Pay scale group
Pay scale level
for new entries data is coming but for old entries no data is coming
in RSA3 the extractor is bringing all the fields except those fields coming empty
but in the table PA0008 the data exists for the same employees,
the info object is using FULL UPDATE and these data are not coming
can anyone help ???

after my investigations i found the following
in BI 7.x
Field in BI : SLTYP "Pay grade type"
Table : PA0008
Field in Table of Origin : TRFAR
in BI 3.x
Field in BI : SLTYP "Pay grade type"
Table : PA0008
Field in Table of Origin : SLTYP
so now the field is the same as TRFAR : Pay scale type
my problem now is for some employees data is coming in SLTYP and for others it is coming in TRFAR and they are picking from the same field in PA0008 which is TRFAR
the extractor is extracting the data like this employees has personnel no < 15332 is coming in SLTYP and >= 15332 in TRFAR
i know it is looking silly but this is my situation
thanks

2004s Data Store; activated even no master data exist

We set in the infopackage and in the DTP the button, that the system should not update if no master data exist.
This does not work. Somebody knows if that is a bug or a feature?
Solutions are also welcome.

you need to check the flag in the transformations for Referencial integrity to stop the data from loading if there is no master data avaliable

Date Axis Line/bar Chart not working properly when rendering through SDK

Hi all,
When i render a existing Crystal report 2011 through java SDK code(Eclipse) bar chart is working fine, But the Date Axis line chart is not displaying properly. the properties are getting changed.. Any clue how to handle this? Do we have particular jar for Chart?
Thanks in Advance!
Regards,
Mirthu

Hi Mirthu
I moved your post to the SAP Crystal Reports, version for Eclipse SCN Space. Unfortunately, all I know about Java is that it's in the cup in front of me . But I will get someone to have a look that should be able to help you ASAP.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada

Data load buffer [1] does not exist error when loading cube

Hello
I'm trying to load data using Essbase Studio. Everything was working fine, the load used to occur very quickly.
After updating the SQL query to load a larger period ( 5 years instead of 2 ), the load fails after exactly 10 minutes ! I'm wondering if there's a timeout configuration or something similar in Essbase because I have other cubes that has large queries that are stopping after exactly 10 minutes.
The environment is:
Essbase 11.1.2.1 on Linux 64 bits
Data source: Oracle 10r2 database
This is Essbase Studio Log
Failed to deploy Essbase cube
Caused By: Failed to load data on database: CartTst.
Caused By: driver.DriverException.GetDatabaseInfoFailed
Caused By: IO Error: Socket read timed out
Caused By: Socket read timed out
This is the Cube Application Log
[Thu Jul 19 18:34:38 2012]Local/CartTst///1136855360/Info(1013210)
User [ERS0411@AD_Directory] set active on database [CartTst]
[Thu Jul 19 18:34:38 2012]Local/CartTst/CartTst/ERS0411@AD_Directory/1114749248/Info(1013091)
Received Command [LoadBufferTerm] from user [ERS0411@AD_Directory]
[Thu Jul 19 18:34:38 2012]Local/CartTst/CartTst/ERS0411@AD_Directory/1114749248/Error(1270040)
Data load buffer [1] does not exist

I am getting the same error: Data load buffer [2] does not exist
When I changed the load rule it works fine.
Thanks Glenn

Hierarchy leaf not shown while data exists

Hi experts,
We have the following issue regarding the (in)visibility of hierarchy leafs:
We know that transactional data exists for a particular item in the hierarchy (total value is zero). This item is not shown by default in the report output (while zero suppression has been turned off). There are a few ways to make the item visible, e.g:
     1. Deactivate the hierarchical display
     2. Filter on the item
     3. Filter on another characteristic value for which the transaction data doesn't add up to zero.
     4. .........
However, we would like to show the item in any case, so even when the underlying transactional data sums up to zero.
Has anyone faced a similar problem before? Any idea how to solve the issue?
If necessary, I can send some screenshots with detailed information by email.
Thanks in advance !
Kind regards,
Rene

Hi,
We had a similiar issue in the Cost Element Hierarchy & got resolution.
I followed the below method an extract from SDN Forum reply.
You need to make the InfoObject an InfoProvider. Then you create a multiprovider with your InfoCube and the InfoObject. When you create a query, insert a new column that contains the key figure 0ROWCOUNT and a restriction on 0INFOPROV to your InfoObject.
When you right click on 0INFOPROV you now have the option to select Constant Selection. When you've turned it on you do a right click again and you're able to activate "Display non-posted values."
Finally hide the new column and execute the query.
Also we found out that for the nodes that were not appearing , the master data was incomplete. there was no source system assignment to those, we updated the field manually & with the above method the query worked.
Regards
Lalan

Essbase Error - 1270040 Data load buffer [2] does not exist

When building dimension for ASO cube, it keeps giving me this error message. Do I need to activate or increase the Data Load Buffer when building dimenions manually (not using MaxL)? It allows me to build part of the dimensions using about 100 records from the load file, but once the record number increases it gives out this error and shows the dimension build error. Appreciate any help!!!

I am getting the same error: Data load buffer [2] does not exist
When I changed the load rule it works fine.
Thanks Glenn

'Get All New Data Request by Request' option not working Between DSO n Cube

Hi BI's..
Could anyone please tell me why the option ' Get one Request only' and 'Get All New Data Request by Request' is not working in DTP between Standard DSO and InfoCube.
Scenario:
I have done the data load by Yearwise say FY 2000 to FY 2009 in Infopackage and load it to Write-optimised DSO (10 requests) and again load Request by request to Standard DSO and activate each request. I have selected the option in DTP's to 'Get All New Data Request by Request' and its working fine between WDSO and SDSO. But not working between Cube and SDSO. While Execute DTP its taking as a single request from SDSO to Cube.( 10 request to single request).
Regards,
Sari.

Hi,
How does your DTP setting looks like from below options ? It should be change log, assuming you are not deleting change log data.
Delta Init. Extraction from...
- Active Table (with archive)
- Active Table (without archive)
- Archive ( full extraction only)
- Change Log
Also if you want to enable deltas, please do not delete change log. That could create issue while further update from DSO.
Hope that helps.
Regards
Mr Kapadia
*Assigning points is the way to say thanks*

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
Thanks, Rick

The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up?

For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?

For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?

thrillhousecody
Thanks for the reply with additional information.
Recent history for Premiere Elements points to the program having problems when more than 1 video card/graphics card is
being used by the computer on which Premiere Elements is running. This observation may seem contra indicated by the fact
that you say that the program did work well about 2 years ago in the same setup. But other factors may have set in with regard
to drivers, drivers versions, and driver conflicts. But this factor, does need to be ruled in or out.
Can you disable one or the other card to determine the impact of this on your problem?
But, of prime concern with regard to video card/graphics card is the use of a NVIDIA GeForce card with Premiere Elements 10.
Even if your NVIDIA GeForce were the only card, Premiere Elements 10 will not work properly unless the NVIDIA GeForce driver
version is rolled back to about May 2013. This may be one of the major factors here.
a. Device Manager/Display Adapters and find out Driver Version and Driver Date
b. Read the background information for the Premiere Elements 10/NVIDIA GeForce issue
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
Also see the Announcement at the top of this forum regarding the matter - also with full details of the situation and how to fix with the
driver version roll back.
Please review and consider and then we can decide what next.
Thanks.
ATR
Add On...This NVIDIA GeForce situation is specific for Premiere Elements 10. You should not expect to see the problem for
later versions of Premiere Elements.

I uninstalled Flash Builder 4.7 using the uninstall app. I'd like to re-install the app, but Creative Cloud says it's up-to-date, even though it does not exist anymore on my computer. How can I re-dowload it?

I uninstalled Flash Builder 4.7 using the uninstall app. I'd like to re-install the app, but Creative Cloud says it's up-to-date, even though it does not exist anymore on my computer. How can I re-dowload it?

CC desktop lists applications as "Up to Date" when not installed
http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

I have an iphone 3G 16GB 4.2.1 - i moved back to canada and got telus mobile service. they cant get phone working because cellular data network tab/button is not on my phone. How do i get it on there

i have an iphone 3G 16GB 4.2.1 - i moved back to canada and got telus mobile service. they cant get phone working because cellular data network tab/button is not on my phone. How do i get it on there

OK. T-Mobile is NOT owned by AT&T... yet... The deal hasn't gone through yet. T-Mobie's US network is not compatible with the iPhone. Lots of things don't work right. There is not, and never has been an unlocked 3G sold in the US. Don't know where the phone originated, but more than likely it was in the US. If that's the case, the phone has been hacked/jailbroken to get it to work.
Have you tried doing a restore or restoring the phone as new? I have to warn you, if you do so and the phone is hacked/jailbroken, it will re-lock to AT&T and will become unusalbe. I think your best bet right now might be to save yourself a lot of grief and just upgrade to new phone from a legitimate source.
I would never even consider buying an iPhone on ebay. 99% or more are hacked, jailbroken and/or stolen.

Iphone 4s data will not work + does not show up when plugged into macbook.

I need to try to reset my iphone because it is not allowing me to use data on the phone even though my carrier had verified all the settings are correct and that I have unlimited data on my plan. Every time I try to access the internet on the phone without wifi connected I get an error message saying "could not activate cellular data network" or "you are not subscribed to a cellular data network."
However, when I plug my iphone 4s into my macbook pro it is recognized and shown in itunes, however I cannot download photos (iphoto shows an error message saying "no camera found") and the phone does not show up on my desktop or finder. I find alot of people have a problem with the iphone not showing up AT ALL, but mine works in itunes, just nowhere else on my computer.
I have tried to use icloud to back it up, but when I log onto icloud with my macbook to see what data is there and try to access my photos, only my contacts and a few other apps I dont need show up. No photos at all.

If there's an Apple store nearby make an appointment with the genius bar to have it checked. Be sure to sync it and back it up, as well as import your photos and videos to your computer and back up your contacts separately (such as by sync them with iCloud) in case it needs to be replaced.

Error: ORA-16532: Data Guard broker configuration does not exist

Hi there folks. Hope everyone is having a nice weekend.
Anyways, we have a 10.2.0.4 rac primary and a 10.2.0.4 standby physical standby. We recently did a switchover and the dgbroker files automatically got created in the Oracle_home/dbs location of the primary. Now need to move these files to the common ASM DG. For this, I followd the steps from this doc:
How To Move Dataguard Broker Configuration File On ASM Filesystem (Doc ID 839794.1)
The only exception to this case is that I have to do this on a Primary and not a standby so I am disabling and enabling the Primary(and not standby as mentioned in below steps)
To rename the broker configuration files in STANDBY to FRA/MYSTD/broker1.dat and FRA/MYSTD/broker2.dat, Follow the below steps
1. Disable the standby database from within the broker configuration
DGMGRL> disable database MYSTD;
2. Stop the broker on the standby
SQL> alter system set dg_broker_start = FALSE;
3. Set the dg_broker_config_file1 & 2 parameters on the standby to the appropriate location required.
SQL> alter system set dg_broker_config_file1 = '+FRA/MYSTD/broker1.dat';
SQL> alter system set dg_broker_config_file2 = '+FRA/MYSTD/broker2.dat'
4. Restart the broker on the standby
SQL> alter system set dg_broker_start = TRUE
5. From the primary, enable the standby
DGMGRL> enable database MYSTD;
6. Broker configuration files will be created in the new ASM location.
I did so but when I try to enable the Primary back I get this:
Error: ORA-16532: Data Guard broker configuration does not exist
Configuration details cannot be determined by DGMGRL
Form this link,(Errors setting up DataGuard Broker it would seem that I would need to recreate the configuration....Is that correct ? If yes then how come Metalink is missing this info of recreating the configuration... OR is it that that scenario wouldnt be applicable in my case ?
Thanks for your help.

Yes I can confirm from the gv$spparameter view that the changes are effective for all 3 instances. From the alert log the alter system didnt throw u pany errros. I didnt restart the instances though since I dont have the approvals yet. But I dont think thats required.

All data and messaging works on my note 4, but last night the cellular phone service just went dead. I can call people but the line is just silent, and people can call me, it rings, but I can't hear them. ?????

all data and messaging works on my note 4, but last night the cellular phone service just went dead. I can call people but the line is just silent, and people can call me, it rings, but I can't hear them. ????? What is wrong with it???? How do I fix it????

You aren't attached to a bluetooth headset or other device for some strange reason? Or even an automobile bluetooth, I have a friend that has this issue with his Prius because even when it is not running the bluetooth is still active and connects to his phone.

MSS No data exists. Is working - or not

Similar Messages

Maybe you are looking for