MSS Organizational Assignment iView not displaying

Hi,
I'm using the MSS business package.
When navigating to Team - Employee Info - General Info, selecting an employee and clicking on the organizational assignment hyperlink, nothing happens. The Org Assignment iview does not popup.
However if I go into the other links under Team - Employee Info such as Personnel Development, and choose the same employee, the organizational assignment iview does start correctly.
I'm not sure where the problem lies here or what config controls this behaviour.
Any advise please.
Regards
Mr.T

Hey Mr. T,
  First off, great name.
  Secondly, and to address your issue, can you say whether or not you've attempted to move (copy/paste) any of the XSS content from the default location in the PCD to another location? Any content that might use OBN and/or relative paths to call secondary content items will NOT work properly if you start moving content around in the PCD. That's not to say it can't be done, but additional steps must be taken after you've moved this content. Please comment on the current location of your content in the PCD... was it moved at all?
  Additionally, it may prove useful to captur an HTTP trace during the 'failure scenario' because you can often derive the target PCD location from the entries in that trace. HTTP Watch is a free tool that works well. There are others too, just Google-search for one. If possible, paste the last dozen or so lines of the trace into a reply here and we can try to see what exactly is being called and, hopefully, tell you why it's not rendering.
-Kevin

Similar Messages

  • Microsoft organizer clipart thumbnail not displaying correctly

    We use MS Office 2010, when I try to do Insert>Clipart>then type a keyword(ie. ball). It displays the local clipart images but not the images from online Microsoft organizer. It just displays X-mark on the thumbnail.
    I've already repaired MS Office, cleared temporary internet files but to no avail.
    It will only work if you right-click on the thumbnail with X-mark, then choose 'make available offline' to save the clipart locally. This will take as you have to do it for each.
    Has anyone experienced this issue and fixed it?
    Appreciate the help.
    Thanks 

    Hi,
    Are you using Remote Session and facing this issue?
    Seems this issue is not related to RDS and it’s related with Microsoft organizer. You can place your issue with
    MS Office Forum for more troubleshooting
    Apart I can only provide you with below article for troubleshooting.
    You cannot preview or insert images correctly when you use Web Collections to search the Internet for clip art thumbnails in Office
    http://support.microsoft.com/kb/822518
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • KM Document Iview not Displaying

    Hi Experts,
    I have created KM Document iview and when i preview, its working but when i assign it to Role and check it with Users or Admin am getting error page cannot be displayed.
    Please let me know what i have missed, I have checked Entry Point for both IView and Role there are YES, but its not working.
    Regards,
    Siva

    Hi hari,
    It is problem on client side cache. Goto IE Browser --> Tools --> Internet option and Clear the history, Delete temp files and Delete cookies. Then you have to check the iView.
    Change property of Document iView as
    Allow Client Side Caching -> No
    Hope it helps
    Thanks,
    cbr

  • Employees from Organizational assignment were not found from BP Relations

    Hello Friends,
    I have problem here.
    When an employee is assigned to multiple positions in the same organization  in the Organizational structure (PPOMA_CRM) and one such assignment is deleted at a later point of time, it will not be found from the BP relations i.e.. neither in the "Is Employee of" relationship of Employee BP nor in the "Has Employee for" relationship of the Organization BP.    Steps to Reproduce:    1) Assign Employee to Position i.e. 'Sales Rep1' (General Attribute (CRM) Change)   2) Save   3) Validate from the BP of this Organisation that the Employee is in the 'Relationships' list.   4) Assign the same Employee to another Position i.e. Sales rep 2 in the same organisation   5) Save   6) Validate from the BP of this Organisation that the Employee is in the 'Relationships' list.   7) Delete Assignment from 'Sales Rep1'   8) Check Relationship of the BP. RESULT: Employee does not exist. So, if the Employee is assigned to multiple positions in the same organisation and then deleted from one of the positions, then Relationship in BP (both Organisation and Employee) is deleted.     
    Any one knows what is going wrong here.
    Thanks a lot in advance
    Rashit

    Hello Frank
    I've been careful regarding that as well, following some recommendations from this link: http://technology.amis.nl/2009/07/06/create-deploy-and-consume-an-adf-task-flow-with-adf-business-components-inside/
    The class/package structure is different and unique for each application, "Main", "Employees" and "Departments". On a paranoid attempt while being aware of the situation you mentioned, I renamed the DataBindings.cpx (outside JDeveloper) to EmployeesDataBindings.cpx and DepartmentsDataBindings.cpx in each respective application, while refactoring the adfm.xml files to point to the new names.
    I've also chosen the option to store only the name of the database connection for the deployment of each ADF Library Jar
    Still, the problem persits... *cry*
    One thing I didn't mention in my initial post is... I do have ADF Security (form-based) enabled on the "Main" application, with the appropriate roles assigned to the Main.jspx page and even to the bounded task flows that come from the ADF Library JARs (there's an option in the the Resource Grants section of the jazn-data.xml file when the resource type is "Task Flow" that says "Show task flows imported from ADF libraries"), without which the region in the Main.jspx page would not even try to render (I guess it would fail internally with an unauthorized error but it doesn't actually display any error in the user interface)... Could this be the root of the problem? I don't see any option to grant permissions to DataControls or AppModules tho...
    Thanks again. Regards,
    - Tiago Vidigal

  • PS Elements 9 Organizer window will not display

    I've been using PS elements 9 for a long time, today I wanted to import new JPG's and started the program, organizer started but the window that normally displays the organizer, did not come up, when hovering over the organizer icon on the task bar the small image of the organizer shows up but when an attempt is made to open the window, nothing happens.  I am able to open and view/work using the Editor, but not the organizer.  All other programs display properly.  I have power cycled the PC and re-installed program from the original disk with no success.   Can anyone help?

    Moved from Photoshop forum to Photoshop Elements forum

  • IView not displayed in page- URGENT

    Hi,
    1. I have created an <b>ABAP Webdynpro iView</b> and added it as delta link to a page.
    when i try to see the page preview the it gives the following error:
    <b>Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    The exception was logged. Please inform your system administrator.
    Exception id: 07:05_06/01/06_0721_464296750
    See the details for the exception ID in the log file</b>
    But the iView preview works fine
    2. I have added the page as delta link to a role that i created
    When i login as a user with the appropriate role, the page is displayed, but it does not have the iView.
    What could the reason be?
    kavitha

    Hi Kavitha,
    > Exception id: 07:05_06/01/06_0721_464296750
    > See the details for the exception ID in the log file
    Please follow the instructions... and check out the default.X.trc file(s).
    Hope it helps
    Detlev

  • HTML form in iview not displaying correctly

    Hi
    I have made a KM document iView and in that I have called a HTML page.
    The problem is that the margins in the iView are too much and due to this the content is shrinked in between.
    When I open the page in new window then it is correctly displayed but shrinks in portal content area.
    Kindly suggest how to have the contents displayed in the same way as in the HTML file.
    Regards
    nitin

    Hi 
    Outlook 2007 or newer use Microsoft Word for their HTML engine.
    You can refer this page http://www.campaignmonitor.com/css/ shows
    many things that do not work in different clients.I think Someone needs to re-code
    the HTML form to make it work in the current versions of Outlook. You can try formatting with text and HTML and see the results.
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

  • BI Admin Cockpit - Iview not displaying data

    Hi
    we recently installed BI admin cockpit and found out that the data is not showing in Iview different windows.
    System admin -> Monitoring -> Business Intelligence ->  Data load Status -> Infopackage statistics.
    I could see 4 Iview windows but no display of information but If I click options and open in new window , I could see the statistics displayed.
    How do I make the statistics displayed in the default window
    thanks
    Edited by: Bhat Vaidya on Aug 14, 2008 11:49 AM

    Hi,
    I applied SAP Note 972514 Empty BEx Web analyzer instead of BEx .
    try it and let me know.
    thanks

  • Assigned To not displayed

    Step 1: Open a User story
    Step 2: Click on testcases tab
    Step 3: Add a testcase
    Step 4: Write a testcases without any Assigned To name
    Step 5: Save the steps
    Step 6: Click on the testcase again
    Step 7: Assign some name in Assigned To and Save
    Step 8: The Assigned To name is name getting displayed unless it is reloaded
    Kindly confirm if this is a bug

    Hi Govindh14,  
    Thanks for your post.
    What’s the version of your TFS and VS?
    I tested this scenario in my TFS 2013 Update 4 environment, the name displayed in Assigned To correctly after I saved the Test Case work item.
    If you're using the old version of TFS 2013 Server, please upgrade to TFS 2013 Update 4.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • HT5544 I want to re-arrange my ibooks collection, on the help menu organize button is not displayed

    I looked for some answers about this issue, on the mac forum i found a forum that states that on the help menu, there is an organize books or something button, well, that doesnt appear on my mac, i need some help please.

    You can organise books into collections. To create a new collection select File > New Collection (rename it if you wish). Select Books in the Sidebar and select a book Control Click > Add to collection.
    I hope this makes sense and that it relates in some way to what you are trying to achieve.

  • IViews not loading correctly - BI Admin Cockpit

    Hi All,
    I recently installed the BI Admin cockpit on the portal and having some problem with the iViews. When I access the cockpit from the BI Administration link, the reports don't seem to load but instead just the empty standard web template is displayed in place of all reports.
    1. I checked the iViews preview and they are working fine. No problems with any of the queries/web templates. They are all working correctly.
    2. When I select option to Open report in new window, it still loads a empty web template. BUT, when I refresh that link in Internet explorer the report loads correctly!   (refresh option from the frame menu did not help)
    I didn't understand this behavior and looking for some help/guidance. Any inputs are appreciated.
    Thanks & Regards,
    Sree

    Hi.
    The solution for your issue according to BI Admin Cockpit page refresh and Iview not displayed in web Portal is SAP note 972514.
    Best regards,
    Aliaksandr

  • Cost element not display in grr3

    Dear Experts,
    I have a new cost element assigned in cost elemnt group zzz in KAH2
    While running GRR3 the new cost element I have assigned did not display there.
    Characteristic value for our report in Grr3 is taken from cost element group zzz.
    Please advice
    Thank you in advance

    Also check account group KDH2
    Sam

  • How to Configure Overview of Organizational Units iView in MSS 5.0/6.0

    Hi all,
    Does anyone have any idea on how to configure the "Overview of Organizational Units" iView in MSS to work with the HR backend?
    When I click on the Organizational Unit in the iView, it does not link me to a new page and no Organizational Unit overview pops out.
    Any form of help or hints is deeply appreciated.
    Many many thanks in advance.

    Hi Leong Ko,
    In order for this to work, first and foremost your userid has to be linked to some "manager" employee of your choice in infotype 105, subtype 0001.
    Secondly, the position that this "manager" employee is holding has to be assigned to one organisational unit (technically relationship A003, but you can do this from transaction PPOME).
    Thirdly, the position in question has to be marked as "chief position" (in technical terms relationship A012-manages between the position and the org. unit to which it belongs). This can also be done from transaction PPOME.
    If the organisational unit to which the position belongs has, in turn, subordinate org. units, these will also be shown in the Iview.
    Of course you will have to be logged on to the portal with your userid (the one that you assigned to the employee in infotype 105) for this to work. It will not work if you are just testing the Iview without being logged on.
    Hope it helps.
    Regards,
    Rodrigo

  • KM Home page(Iview - NewsItems & QuickPoll) are not displayed correctly

    Dear All,
    I have one weird issue...We have portal homepage which contains KM QuickPoll iview and KM News iview(NewsExplorer-Layoutset).
    Now the home page is assigned to "everyone" inbuilt group in the portal. Now suddenly for couple of users this 2 iviews are displayed differently(i.e. Images doesn't appear).
    In last week they were getting correct normal Home page display.
    All users are assigned same roles, same access permissions, and having same layoutset display settings...still they are having totally different view for two iviews.....Wat could be the possible solution?????
    ....Urgent solution required....
    Points will be rewarded
    Regards,
    Tushar Dave

    Permissions are alright, it has been given access for everyone user group and for other users they are getting images and proper layout set...
    This is second time we are facing same issue previously when such thing happened we have deleted that specific user and created again and assigned to group and issue was resolved....but i want permanent logical solution...what could be reason for this i am not able to make out...
    Regards,
    Tushar Dave

  • BSP iview Pages not displaying since moved to QA?

    Hi All,
    We're using MSS 60.1.20 and ESS 50.4.  We have created a number of  custom BSP iviews and have grouped them on some custom pages.  These work perfetly fine in DEV but once we transported them to QAS, they data is not being displayed.  The iview titles are being displayed and the iviews are in the correct position but no data is being output on the iviews.  I've checked the BSP in R/3 and is working perfectly fine.
    If i preview the iviews individually (rather than previewing the page in it's entirity), they display perfectly fine.
    So why do they not display when they're on the page?  Is there some parameter that i'm missing?
    What could be different between dev and qas?
    This is a very strange problem and its holding us up in our testing and we're due to go live fairly soon, so any guidance would be most welcome.
    Thanks in advance,
    Liz.

    Liz,
    check the height of the page.
    there will be a expand/collapse on the top right corner,check whether it is expanded or not
    Thanks
    Bala Duvvuri

Maybe you are looking for