MSS PCR ( Change In position)

Hi all
  i am using a one-step approval workflow process in MSS PCR (Request for Position Change).1st time when i am trying to initiate the position change for a particular employee its taking fine.but after the completion of approval process for that employee,whenever i am trying to initiate again the position change process for that employee then its giving me a message as "An organizational reassignment is already planned for this employee" & i am not able to process again for that employee.
but already for the 1st process the approver have run the action through iqs22 tcode.but still its not allowing me to process again for that same employee 2nd time.
kindly give some Clue regarding this.
Thanks
Syam.

hi
As per your issue you are not able to overwrite the feature SCHKZ in IT0007. But i think that default feature of SCHKZ allow you to overwrite and change the workschedule in IT0007.
Can you check for the user exit because of which you are not able to change it.
Hope this should be helpful
Thanks
Arun

Similar Messages

  • MSS:PCR Change of EG and ESG - Urgent

    Hi All,
    When I am triggering workflow without Approval WS5000042,
    It is getting triggered, but goes in processing and do not complete.
    What could be the possible cause of error, everything used in standard as per SAP delivered.
    Useful answers will be rewarded.
    Thanks
    NK

    Hi,
    Just check SWUD ,SWI2_DIAG
    for diagonosis of workflow,and findout more informations.
    as this is a stadard workflow you should also check the event
    linkages are working fine.
    Kind Regards
    Hari Sankar M

  • Change of Position in MSS with Process and Forms

    Hi,
    I'm trying to create authorizations for a change of position in Process and Forms, but every time that I choose a new position to the employee I get the error, No authorization, with this details:
    No authorization
    Message no. 5A277
    Diagnosis
    You are not authorized to perform this activity.
    System Response
    The system cancels the activity you have tried to perform.
    Procedure
    If necessary, you can maintain missing authorizations in Customizing. Please remember that both the standard authorizations and the structural authorizations are checked.
    I have managed to change the position and create positions in SAP with t-code PPOME, but in the MSS Portal it doesn't work.
    I use authorization with context ( S_ORIGINCON ) with a FM in the structural profile that returns my objects ( O, S, P ). I also have personnel planning authorization ( PLOG ) for the returned objects.
    Any help to overcome this problem will be greatly appreciated.
    Regards,
    Diogo Silva.

    Hi there,
    We stop using SAP code to manipulate the infotype 0001, and started using our own code throw generic services I guess (Not my part of the project).
    The problem was that in a change of position for a new created position or even for an existing position there was a need for access to the default position OBJID='99999999'. That's why when you give authorization for object OTYPE=' ' and OBJID = ' ' you will not get an error, because it gives authorization for all objects, witch defeats the purpose of security.
    If you debug the functions used by the portal (MSS or ESS) you will see that in some FM on the call stack there is passed a flag that controls wether or not there is a authorization check for that default position.
    Basically ww stop using the SAP code, and started calling this FM (BAPI, etc) ourselves, and them we manipulated that flag so that we could circumvent the error.
    I hope it was clear, sorry if it was not, truth be told it was a long time since I finish that project.
    If you need anymore help just let me know.
    Regards,
    Diogo Silva.

  • MSS PCR(Personnel Change Request) Report

    Hi Experts,
    We have configured MSS successfully, Now the reqirement is that we require a report which keeps the track of all requests generated during MSS PCR, like which request, who requested, approver, status of the request....etc.....
    Is there any way out where I can track all these things.
    Please suggest.
    Thanks
    Rohit G

    @Rohit Gaharwar 
        Sorry, Rohit...yes, I understood you are on PCRs and not HCM P&F, but I wanted to mention that functionatlity is in fact there for HCM P&F since it was a big missing part for PCRs. And if you are actually on ECC6, you might want to look into it versus PCRs since PCRs are going the way of the dinosaur.
    @Suresh
       Is their some reporting off of workflow that could be done as well? I would think that could show who processes a request as well as where they are "held up". Reporting is a big missing part of PCRS, agreed.

  • HR administrator to process MSS- PCRs for employees

    Hello all,
           We are on SAP ECC 6.0 , EP 7.0 Sp15  and MSS version 600 SP13 .
    We are using MSS Personnel change requests like separation , termination etc.
    We want HR administrator to intiate PCR for all employees as managers do for employees in their respective org. units they
    are heading .
                          We know that in HCM P&F  , HR admin can initiate  Forms for employees .But since we are already using PCRs , we cant switch to HCM P& F .
                                              Is there any way we could meet this requirement with MSS PCRs .
    I feel the only way is if HR admin is at CEO position and is heading all org units , he can process PCRs for all employees .
    But this doesn't seems to be workable .
    I searched the forum and could find out that we can go for customized application .
    any pointers are greatly appreciated.
    Thanks,
    Sahiba

    You can assign manager, Hr admin role as well, and have a custom evaluation path which will populate the
    employees he intends to perform the services!

  • MessageBox on Adobe Form in SAP MSS PCR for SAP ECC 5.0

    Hello,
    I have a question regarding the behavior of Adobe form messagebox in SAP HR MSS PCR (Personal Change Request)
    I tried to test how the messagebox looks like, and so I created a PCR scenario with an Adobe form. This form contains a datetime field. I added the script "xfd.host.messageBox("this is message", "this is title") to the "exit" event of the datetime field. Then I did all the necessary steps so that this PCR is displayed in the Portal.
    Now at the runtime, when I select a date value from the datetime field, the messagebox is displayed, BUT within an empty Adobe Reader page. It is not displayed on the top of my adobe form.
    But the strange thing is that when I use tab key to navigate through the datetime field, the messagebox is displayed on the top of my adobe form, without the empty Adobe Reader page.
    I also tried my script with several different event types, including "Change", and "Validate", it behaves the same way. But when I tried it with the event type "MouseExit", no empty Adobe reader page is shown up at all (of course, this is not the right event type for me)
    The environment is SAP ECC 5.0, SAP MSS business package for ECC 5.0, SAP Portal 7.0 (NW 2004s), Adobe LiveCycle 7.1, and Adobe Reader 8.1.1
    Has anyone experienced this? I'd really appreciate any comments and suggestions. Thanks in advance.
    Best regards,
    Harrison

    Antony,
    The Adobe Reader version is 8.1.1
    Just wondering if you used messageBox in interactive forms with ISR framework, and it worked well for you?
    Thanks.
    Harrison

  • MessageBox on Adobe Form in MSS PCR for ECC 5.0

    Hello,
    I have a question regarding the behavior of Adobe form messagebox in MSS PCR.
    I tried to test how the messagebox looks like, and so I created a PCR scenario with an Adobe form. This form contains a datetime field. I added the script "xfd.host.messageBox("this is message", "this is title") to the "exit" event of the datetime field. Then I did all the necessary steps so that this PCR is displayed in the Portal.
    Now at the runtime, when I select a date value from the datetime field, the messagebox is displayed, BUT within an empty Adobe Reader page. It is not displayed on the top of my adobe form.
    But the strange thing is that when I use tab key to navigate through the datetime field, the messagebox is displayed on the top of my adobe form, without the empty Adobe Reader page.
    I also tried my script with several different event types, including "Change", and "Validate", it behaves the same way. But when I tried it with the event type "MouseExit", no empty Adobe reader page is shown up at all (of course, this is not the right event type for me)
    The environment is ECC 5.0, MSS business package for ECC 5.0, SAP Portal 7.0 (NW 2004s), Adobe LiveCycle 7.1
    Has anyone experienced this? I'd really appreciate any comments and suggestions. Thanks in advance.
    Best regards,
    Harrison

    Antony,
    The Adobe Reader version is 8.1.1
    Just wondering if you used messageBox in interactive forms with ISR framework, and it worked well for you?
    Thanks.
    Harrison

  • MSS PCR confirmation -- customization

    Hi Experts,
    I am facing problem in customizing PCR (request for seperation(enhanced)).
    Environment:
    EP 7.0 SP 12
    ECC 6.0 SP 11
    MSS 1.0 SP 09
    NWDS 7.0.12
    Requirement:
    Customize three PCRs in the SAP suggested standard way.
    first PCR is request for seperation(enhanced).
    In this PCR there are 5 steps
    Select Employee
    Select Form
    Edit Form
    Review Form
    Send(Save)
    After which you get a confirmation page saying:
    Your request has been sucessfully ....bla ...bla and your notification number is bla...bla
    Now the customization required is that there has to be no workflow, so I (as a portal developer) have to add a push button(update database) on the cofirmation page which would call a RFC with the notification number and that RFC will update the database.
    I have configured NWDI and imported all the required components on the development track and there are no dirty DCs, I am able to see all the DCs.
    When I have a look at the code in the DC ....mss/pcr it shows me only the initial two screens while the rest of the screens seem to be dynamically generated by the FPM(it is entering FPM event loop).[CORRECT ME IF I AM WRONG]
    I am deploying the Self Service Administrator handy for the future.
    I am stuck at this point for a week not able proceed.
    Please suggest/correct me as to how to proceed further.
    Just a reminder that I only have to worry about putting the push button.
    Thanx all

    You can set up ISR to make sure there is no workflow. However, the end result will be that it still goes to the proper admin to actually make the change (via Action Box config). I think what you seek is an "auto update" which is NOT supported in PCRs. However, in ECC6, you might want to look at the new Process and Forms which are part of HRAS (HR Admin services) that is replacing PCRs. I think it now supports automatic updates. Hope this helps.

  • MSS PCR form in german in production system

    Hi gurus,
    We are having a problem with the PCR Change Employee group and sub group.
    The adobe forms is coming out in English in both Development and Quality.But in production it's comin in german.We haven't changed anything in the form.But when we change it and transported it .Then also it's coming in english in Dev and Quality but in production it's still comin in german only.
    We are in ERP 2005 and we are using the MSS 1.0 BP.
    Any help is really appreciated.
    Thanks,
    Rao.

    Hi,
    Could you please let me know if you have resolved  it.
    I want to see the PCR forms in some local language. I am able to see the other contents in local language but not the PCR Form.
    Thanks
    Regards
    Santosh

  • Find Dependent DC's for PCR request in mss~pcr

    Hi All,
    Need help in finding the dependent DC's for mss~pcr application.
    Why this becasue I need to check the code behind event the " Refresh" link in Create Application of Employee Change request.
    Thanks
    Gansa

    Hi Gansa,
    wrong forum!
    this is Web Dynpro ABAP floorplan manager - not WD Java!
    Suggest you search in WD Java forum, then if you don't find anything, post there!
    Cheers,
    Chris

  • MSS PCRs - Team Viewer authorizations

    Hi,
    topic - MSS Personnel Change requests
    We have customised team viewer views for HR Manager's employees, based on administrator fields in the IT0001. The way it looks like now, is that the initating user has the option to select either "Directly Subordinate" view or "HR Manager's View".
    The initiating officer could be Line Manager or HR Manager.
    Is there a way to use R/3 authorization in such a way as to have only "Directly Subordinate View" available for LIne Manager, and only "HR Manager's view" available for HR Manager?
    I hope the above query is lucid enough.
    An early reply would be very much appreciated.
    Thanks and Regards

    Hi Karen,
    Which evaluation path/s are you using to find employees? 
    Must admit I haven't tried it in the ECC version yet, but in the "old" OADP I did get this scenario working reliably at a previous customer site.
    I found it was easiest to create a new view that firstly uses an evaluation path that found the managers' position for the "Root Object", and a second evaluation path that collects the employees via B002.  Maybe it isn't quite so easy with the new team viewer config in ECC.......
    Regards,
    John

  • MSS PCR new scenario

    Hi,
    Can somebody help us?
    For the PCR webdynpro sap.com/mss~pcr there are 2 applications:
    <i>PcrDirectLaunchApplication</i>
    <i>PcrApplication</i>
    We are using now <i>PcrApplication</i>, but we want directly start are own scenario, so the manager doesn't have to make a choice. Is there a parameter or an other way to solve this?
    Thank you. Best regards, Ton
    Thanks for help,
    Sven Keller

    There is an alternative scenario as detailed in the Config document. You will go into the Homepage Framework customizing and change the object name of MSS_HCM_SERV_PCR_NEWPCR from <b>PcrApplication</b> to <b>PcrApplicationSingleForm</b>.
    from config document:
    "The desired PCR scenario of the application must also be assigned as the URL parameter. The URL parameter required to jump directly to "Change Employee Group and Subgroup" scenario is "pcrtype", for example, pcrtype = SPEG."

  • How to find related User commands when Use MSS PCR scenarios

    Hi
    We are using  MSS PCR Senarios with Web dynpro Business package.
    How to  know which command is fired when click on buttons PCR web dynpro screens like "Sumbit" "Resubmit" buttons.
    is there any document which tells about the all the standard buttons and its corresponding user commands in R/3 to handle in BADI.
    I have gone through the ISR cook book but not find much information
    Thanks in Advance
    Gopal

    Yes - it is a bit frightening... Had other Macs before this MacBook (Pro), and never experienced such a problem. Don't know - of course I look into the Preference settings from time to time, and maybe I have changed that setting on the other computers... it never occurred to me...
    What an annoyance such a simple decision to make the auto-shutdown after one hour a default can be! Probably, Apple reconsiders :-D I'd rather prefer an auto-lock of the account (instead of an auto-log off)... but I believe it has been expressed often enough that, in this particular case, the - pardon me - Windows-solution (to offer a simple lock of the account, the Windows-L-key combination, IIRC) is much more practical... to copy that behaviour under Mac OS X, You'd have to go through lengths...
    Anyway! Pondind, thank You very much!!! Solved a kind of embarassing, but huge problem of mine!
    Best,
    Björn

  • How to Change the position of Column in ALV report

    Hi Follks,
        Is is possible to change the position of column in ALV report?.If yes then how?
        Basically my requirement is, that user want afacility where , he should be able to change the position
        of column aftre he runs the report.
        Eg: After running the report , user felt that column 5 should be at position 2 , in that case he should   
               be able to drag column 5 at position 2 and vice versa.
        Please help me, how to solve this issue.
        Note : I am using NW 7.0 SP 9
        Regards
        PG
    Edited by: PG on Apr 13, 2009 11:10 AM

    HI PG,
    do below whie filling the filed catlog
    wa_fieldcat-fieldname        = 'Field1".
    wa_fieldcat-COL_POS = '1',
    append wa_fieldcat to it_fieldcat.
    wa_fieldcat-fieldname         = 'Field2".
    wa_fieldcat-COL_POS = '2',
    wa_fieldcat-fieldname         = 'Field3".
    wa_fieldcat-COL_POS = '3',
    Thanks!

  • Is it possible to change the position of beining of text in a standard report

    Hi,
         I am wondering wether it is possible to change the position of the test (the starting point) in a standard report. I would like to print a label with different texts at different positions. If its not possible in a standard report is there any other way to do it.
    Thank you,
    Mudda.

    Hi Mudda, I don't see any way myself to set any particular starting position for your text. It looks like the best way to emulate this behavior would be to add a new line with lots of tab characters or spaces to place your new text at a specific offset from the left. You can also use Append Table to Report and wire in a 2D string array with only a few positions filled in with your various text labels as shown below. This will space text labels pretty well across the page. Try it out and see if it works for you. You could be more clever and build the 2D array programmatically if you wanted more control over position.
    Message Edited by Jarrod S. on 06-02-2006 05:37 PM
    Jarrod S.
    National Instruments
    Attachments:
    Set_Report_Position.JPG ‏69 KB

Maybe you are looking for