MSS: PCR requests filed Hiring manager ???

Dear All,
We are working with ERP2004 MSS solution.
There is some ecruitement(e-recruitment) screen whee we have a field for Hiring manager.
This seems as same in old recruitment solution. But we are not able to identify how this field is coming on this screen..
anyone who has worked/working on MSS solution and using this service.. can you please help me out.
Thanks and regards,
Sudhir

Hi sudhir
look at sap note 787505 might help u.
regards,
kaushal

Similar Messages

MSS PCR ( Change In position)

Hi all
i am using a one-step approval workflow process in MSS PCR (Request for Position Change).1st time when i am trying to initiate the position change for a particular employee its taking fine.but after the completion of approval process for that employee,whenever i am trying to initiate again the position change process for that employee then its giving me a message as "An organizational reassignment is already planned for this employee" & i am not able to process again for that employee.
but already for the 1st process the approver have run the action through iqs22 tcode.but still its not allowing me to process again for that same employee 2nd time.
kindly give some Clue regarding this.
Thanks
Syam.

hi
As per your issue you are not able to overwrite the feature SCHKZ in IT0007. But i think that default feature of SCHKZ allow you to overwrite and change the workschedule in IT0007.
Can you check for the user exit because of which you are not able to change it.
Hope this should be helpful
Thanks
Arun

Hiring Manager in MSS Create Requisiton Request

Hi,
When creating a requisition request you can enter HIRING MANAGER in the pdf-form. Then after the form has been through the approval at the upper-manager and approved, the value from the field HIRING MANAGER is not transferred to the requisition's field "Hiring Mangager" under Basis Data that the Recruiter can see on the Recruiter's Dashboard: Requisitions in the Recruiter role.
My question is whether it is meant like this and HIRING MANAGER in the pdf-form is only used for finding the manager in the workflow (for the rule)? Or it is an error?
We are using BP for MSS EhP4 SP04 + ERECRUIT 604 SP04 + BP for MSS 1.41 SP04+ BP for Recruiter 1.40 SP04 + HCM_ERC_CI_3 + HCM_MSS_ERC_CI_1.
Best regards,
Beata

Hello smit ,
You can find out the enhancement ( BADI defnition ) that corresponds to MSS Requisition request .
Debugging the same will let you know why the error is coming .
You could also be due to config done under MSS -> recruitment.
hope this helps.
thanks,sahiba

Requsition request Hiring manager personal number is missing:

Hi,
This is Regarding, requisition request:
When i am creating requisition request under MSS, through from asking the Hiring manager personal number. Could you please help me how we can get that.
Working with ECC6.0 with EhP-4.
Thank you advance.
Regards,

Hi,
Thank you for yoru input.
Not found that entry any of the search profile type in that table. Could you please let me know under which search profile need to to add?
These are all the search profiles i can see under that table:"ERC_CDCY" "ERC_REQ" "EXT_POST" "INT_CAND" and INT_POER.
Regards.

Find Dependent DC's for PCR request in mss~pcr

Hi All,
Need help in finding the dependent DC's for mss~pcr application.
Why this becasue I need to check the code behind event the " Refresh" link in Create Application of Employee Change request.
Thanks
Gansa

Hi Gansa,
wrong forum!
this is Web Dynpro ABAP floorplan manager - not WD Java!
Suggest you search in WD Java forum, then if you don't find anything, post there!
Cheers,
Chris

MSS - Create a PCR : Request for Separation

Hi All,
After logging on to MSS the manager creates a personnel change request.
He is using a standard request for separation form.. ( Adobe form is used here)
fills the information and saves it.
Once this information is saved , I need to see it in R/3. I somehow cannot remember or pull up the tcode. Can some please help with this.
There is a Tcode that lets you see all the information in R/3 with respect to the MSS PCRs...( Std ISR notification type 56/57 for Request for Separatio).
Any inputs on this will be highly appreciated..
Thanks,..
Mark

Hello!
You can view the raw data of the form via function module: ISR_SPECIAL_DATA_GET (/se37).
You can view the notification information for the created request by using tcode: /iqs22
Hope that helps,
Harald

MSS PCR(Personnel Change Request) Report

Hi Experts,
We have configured MSS successfully, Now the reqirement is that we require a report which keeps the track of all requests generated during MSS PCR, like which request, who requested, approver, status of the request....etc.....
Is there any way out where I can track all these things.
Please suggest.
Thanks
Rohit G

@Rohit Gaharwar
Sorry, Rohit...yes, I understood you are on PCRs and not HCM P&F, but I wanted to mention that functionatlity is in fact there for HCM P&F since it was a big missing part for PCRs. And if you are actually on ECC6, you might want to look into it versus PCRs since PCRs are going the way of the dinosaur.
@Suresh
Is their some reporting off of workflow that could be done as well? I would think that could show who processes a request as well as where they are "held up". Reporting is a big missing part of PCRS, agreed.

HR administrator to process MSS- PCRs for employees

Hello all,
       We are on SAP ECC 6.0 , EP 7.0 Sp15 and MSS version 600 SP13 .
We are using MSS Personnel change requests like separation , termination etc.
We want HR administrator to intiate PCR for all employees as managers do for employees in their respective org. units they
are heading .
                      We know that in HCM P&F , HR admin can initiate Forms for employees .But since we are already using PCRs , we cant switch to HCM P& F .
                                          Is there any way we could meet this requirement with MSS PCRs .
I feel the only way is if HR admin is at CEO position and is heading all org units , he can process PCRs for all employees .
But this doesn't seems to be workable .
I searched the forum and could find out that we can go for customized application .
any pointers are greatly appreciated.
Thanks,
Sahiba

You can assign manager, Hr admin role as well, and have a custom evaluation path which will populate the
employees he intends to perform the services!

Adobe form MSS PCR senarios not working with Portal SSL

Hi All,
we have implemented MSS PCR senarios Nw04 with ERP2004 system.
every thing is working fine when use http protocal for portal acess.
Now we try to implement ssl for portal. so started implemnation and done in portal side, after that when try access any senario forms , The adobe form is not opening for editing, its throwing error
The initial exception that caused the request to fail, was:
 java.net.ConnectException: Connection refused: connect
 at java.net.PlainSocketImpl.socketConnect(Native Method)
 at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
 at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
 at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
 at java.net.Socket.connect(Socket.java:461)
 ... 47 more
its very urgent anybody can help out this, what settings ot be done on R/3 server and Portal and ADS server
Thanks in advance
Gopal

Hello Gopal,
You would only need an https connecion between the browser and the portal server if you are only concerned with the MSS applications. You need to have SSL configured from the portal to ADS server had you implemented some custom scenarios like certification, digital signature etc. But, considering your MSS issue, you do not need to worry about it untill and otherwise your landscape demands you to do so for any security reason.
Well, you might have already gone through the following link, incase not, please go through the link to find out more on how to confugre SSL on the j2ee engine:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm<a href="http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm</a>

MessageBox on Adobe Form in SAP MSS PCR for SAP ECC 5.0

Hello,
I have a question regarding the behavior of Adobe form messagebox in SAP HR MSS PCR (Personal Change Request)
I tried to test how the messagebox looks like, and so I created a PCR scenario with an Adobe form. This form contains a datetime field. I added the script "xfd.host.messageBox("this is message", "this is title") to the "exit" event of the datetime field. Then I did all the necessary steps so that this PCR is displayed in the Portal.
Now at the runtime, when I select a date value from the datetime field, the messagebox is displayed, BUT within an empty Adobe Reader page. It is not displayed on the top of my adobe form.
But the strange thing is that when I use tab key to navigate through the datetime field, the messagebox is displayed on the top of my adobe form, without the empty Adobe Reader page.
I also tried my script with several different event types, including "Change", and "Validate", it behaves the same way. But when I tried it with the event type "MouseExit", no empty Adobe reader page is shown up at all (of course, this is not the right event type for me)
The environment is SAP ECC 5.0, SAP MSS business package for ECC 5.0, SAP Portal 7.0 (NW 2004s), Adobe LiveCycle 7.1, and Adobe Reader 8.1.1
Has anyone experienced this? I'd really appreciate any comments and suggestions. Thanks in advance.
Best regards,
Harrison

Antony,
The Adobe Reader version is 8.1.1
Just wondering if you used messageBox in interactive forms with ISR framework, and it worked well for you?
Thanks.
Harrison

MSS PCR confirmation -- customization

Hi Experts,
I am facing problem in customizing PCR (request for seperation(enhanced)).
Environment:
EP 7.0 SP 12
ECC 6.0 SP 11
MSS 1.0 SP 09
NWDS 7.0.12
Requirement:
Customize three PCRs in the SAP suggested standard way.
first PCR is request for seperation(enhanced).
In this PCR there are 5 steps
Select Employee
Select Form
Edit Form
Review Form
Send(Save)
After which you get a confirmation page saying:
Your request has been sucessfully ....bla ...bla and your notification number is bla...bla
Now the customization required is that there has to be no workflow, so I (as a portal developer) have to add a push button(update database) on the cofirmation page which would call a RFC with the notification number and that RFC will update the database.
I have configured NWDI and imported all the required components on the development track and there are no dirty DCs, I am able to see all the DCs.
When I have a look at the code in the DC ....mss/pcr it shows me only the initial two screens while the rest of the screens seem to be dynamically generated by the FPM(it is entering FPM event loop).[CORRECT ME IF I AM WRONG]
I am deploying the Self Service Administrator handy for the future.
I am stuck at this point for a week not able proceed.
Please suggest/correct me as to how to proceed further.
Just a reminder that I only have to worry about putting the push button.
Thanx all

You can set up ISR to make sure there is no workflow. However, the end result will be that it still goes to the proper admin to actually make the change (via Action Box config). I think what you seek is an "auto update" which is NOT supported in PCRs. However, in ECC6, you might want to look at the new Process and Forms which are part of HRAS (HR Admin services) that is replacing PCRs. I think it now supports automatic updates. Hope this helps.

MSS PCR screen error in UWL

HI expersts.
Does anybody have an idea how create service in WF_EXTSRV and WF_HANDCUST for MSS PCR screens .
if anybody worked on MSS PCR screens in portal side (not developmet) .plz share with me .
In my uwl when i try to open the PCR form request it is throwing error
"message number can not read form workflow container"
Thanks in Advance
Surekha .

Hi srinivasan
Thanks for ur reply.
The same task is there in users inbox in R3.
I have refreshed UWL system .
What i think service(ABAP) is required for this task . That is through WF_EXTSRV and WF_HANDCUST.
How to create service in WF_EXTSRV .
Surekha.

MSS PCR's vs Forms

I need to understand the difference between Personnel Chnage Request (PCR) in MSS and Forms functionality? Are these two different? if yes, how?. Would be helpful if some screen shots could be shared- which would help me relate easily.
Thanks,

Hi Priyaneet
HCM Processes and Forms can work as both request functionality to HR Admins and also
allow Managers to update infotypes directly in R3 via PDF forms displayed in the Portal
PCRs as I understand it are predominantly just requests - allowing managers to requestchanges to infotypes
There is also a difference in the technology platform used --->
HCM Processes and Forms are launched by Webydynpro ABAP applications and viewed in PDF
- whereas MSS PCRs were traditionally launched by HTMLB and viewed in JSP
or most recently launched by Webdynpro JAVA iviews and viewed in PDF
In addition to this - there are further limitations with PCRs - see section
EP-PCT-MGR-HR
MSS: Interactive Forms
of note 852235
Best wishes
Stuart

How to add table data to an MSS PCR form?

Hi All,
I am new to Adobe Interactive Forms and I need to add a table of information to an existing form. This form is a customized version of an MSS PCR form Request for Termination. Currently the form fields are populated by an implementation of BADI QISR1. It is a copy of implementation HRWPC_PCR and uses the internal table special_data. All the fields currently on the form are single fields and I can see how they are populated. However I now want to add the contents of an internal table. I have read through the ISR cookbook but I cannot work out how to get this data onto the form and how or if it should be stored in the special_data table. The table (LOAN) has been added to the context and has 4 fields. Would anybody be able to provide some direction to me? Please let me know if I have not provided enough information.
Thanks very much!
Ashley

Hello Ashley,
you are already close to the solution. In BADI QISR1 you simply fill the
table SPECIAL_DATA e.g.like
fieldindex = 1
fieldname = 'FIELD1'
fieldvalue = 'Value1'
fieldindex = <n>
fieldname = 'FIELD1'
fieldvalue = 'VALUE<n>'
Then on the Adobe form layout (Adobe Designer), you have to use the table control XFO from the standard library. Here you have to bind then the corresponding column to FIELD1.
Best regards,
Simon

MSS PCR new scenario

Hi,
Can somebody help us?
For the PCR webdynpro sap.com/mss~pcr there are 2 applications:
PcrDirectLaunchApplication
PcrApplication
We are using now PcrApplication, but we want directly start are own scenario, so the manager doesn't have to make a choice. Is there a parameter or an other way to solve this?
Thank you. Best regards, Ton
Thanks for help,
Sven Keller

There is an alternative scenario as detailed in the Config document. You will go into the Homepage Framework customizing and change the object name of MSS_HCM_SERV_PCR_NEWPCR from PcrApplication to PcrApplicationSingleForm.
from config document:
"The desired PCR scenario of the application must also be assigned as the URL parameter. The URL parameter required to jump directly to "Change Employee Group and Subgroup" scenario is "pcrtype", for example, pcrtype = SPEG."

MSS: PCR requests filed Hiring manager ???

Similar Messages

Maybe you are looking for