MSS Reports - Config done but no show on reports selection IView
Hi there,
I configured T77MWBFCH, and T77MWBFCD for the MSS reports.
For some reasons, if I modify a standard existing entry, the change appear in the portal, but if Itry to create a new NODE and REPO, it does not appear in the reports selection IView on the portal.
Any idea?
Thank you!!
Genevieve
Hi Genevieve,
Can u share with us how u resolve this issue.
Thanks,
Rgds,
Nanie Arianie
Similar Messages
-
When I tried to uppdatte, the Flowboard app the charge was maded but cannot be uppdated and it shows an "unnable to complete purchase" advertisement.
Hi
Would love to help you with Flowboard. Are you trying to upgrade to premium?
Please let us know how we can help. -
Clean Install done but still showing updates required for previous owners apps needing apple id?
Hi All,
First time post and newbe to Macbooks so be gentle please... :-)
I have bought a second hand macbook pro retina, the previous owner had removed all his data but not reformatted. I was having issues that some apps updates were showing that i couldn't update, as it kept asking for the previous owners ID. I thought the best thing to do was to reformat and start again to get a frsh machine...
First issue after wiping the drive was that when i went to install the OS, it came up saying i didn't own a copy, as it was the provious owner who had installed the OS.... so after buying Mountain Lion under my account (still not sure if i needed to???) i was then able to install a new OS. Went through all the new user screens to set time and keyboard etc so i assumed i now had in effect a new machine.
Again though, when i went to update the software, the previous users apps, that no longer appear on the machine, were showing as needing an update, and again were asking for the previous owners apple id to update????
How do i get this sorted so i have a new machine without the history of a previous user, his apps and the required updates?
I was also worried that after the fresh install i seem to have lost iPhoto, garage etc... i thought these came as standard, am i going to have to buy these also?
Hope someone can help, desperate to get myself properly up and running and enjoying my new toy!
RobSelling Macs has become rather messy what with the different license requirements.....
if the Mac had ML preinstalled, then the owner is allowed to make a one time transfer of the OS license; however, he needs to wipe the drive and use internet recovery to reinstall the system without using an Apple ID
If, however, the Mac came with something other than ML (SL or Lion), then the seller needs to wipe the drive and reinstall the original system because any license obtained from MAS is NOT transferable.
So, if it did come with ML originally and unless you wish to contact the seller, try internet recovery - pressing Command + Option + R while restarting ( a slightly different process than recovery) , wipe the drive in Disk Utility and download the OS. It should work - if not, I'd suggest a quick visit to the nearest Genius Bar and ask for help (reminding them that the license does allow a one time transfer).
As for any other apps, you will need to purchase them (such as iLife, iWork, etc) - none of those licenses are transferable. If you encounter a problem doing so, you might want to address that issue at the Genius Bar as well; you do need to buy them again, but in some instances, someone testing that scenario was not able to, so just be aware that there might be a glitch.
Edit: In order to do an internet recovery, you will also need to make sure that you are connected only via WiFi. -
Where does the information get stored when you sync/back up your i-phone. I have no idea where to look if I need it again!
ThanksYou can chhose the backup when you would reset your device. In this case you would get the option, during the set up process, to choose your backup and restore your device from it.
(You can find a few information e.g. size and date of your backup in "Settings > iCloud > Storage & Backup > Manage Storage") -
Subreport dropdownlist does not show any report !!
Just finished preparing two reports, rpt1 (Master), rpt2(SubReport), each a separate report works well. after that i added subreport control to rpt1 and went to SubReport properties to add rpt2 ... but ( Use this report as subreport ) did not show
any report in list.Hi,
What happend if you write in the textbox for subreport path, the path, works? what version of Report Builder do you have?
Raymundo Chapa, MCTS http://www.inavant.mx/blog http://projectaserverzone.blogspot.com/ -
Securing report path in address bar for 10g Reports
I am using the following code to run report developed in reports 10g using windows. Report is running but it shows all the path in the address bar. like
http://rep_server:8889/reports/rwservlet?report=d:\Sticker_rpt&desformat=pdf&destype=cache¶mform=no&From_Roll=123&userid=user/password@orcl
I don't want the user to view this path for some security reasons. i am a middle level programmer, so can anybody please guide me how can i protect path from user by editing it after report open or some changing in the following code. any solution..........
Code to run report.
Declare
v_url varchar2(3000);
BEGIN
v_url := 'http://rep_server:8889/reports/rwservlet?report=d:\Sticker_rpt&desformat=pdf&destype= cache¶mform= no&REFNO=123&userid=user/password@orcl;
web.show_document(v_url,'_blank');
Exception
when others then
message(SQLCODE||SQLERRM);
raise form_trigger_failure;
End;when you run the report from forms, you should use RUN_REPORT_OBJECT to run the report, then there is no username/password in the url (example Procedure is giving an error. ). Also, you can use javascript to hide the adressbar when using WEB.SHOWDOCUMENT
WEB.SHOW_DOCUMENT('javascript:void(window.open("the_url","","location=no,toolbar=no,menubar=no,status=no,resizable=yes"))','_blank'); -
Report Not apperaing in User's Query Report Viewer Menu
Hello There!
Continuing with below thread
Report Category not Appearing in Report Definition
When i search for a report i created, i'm(as a normal user) not able to find any report after searching.(assigned to me or to my role.)
The view PSXPRPTSRCH_VW has two tables PSXPRPTDEFN and PSXPDATASRC .Both have oprid column which is blank and the above view's first where clause is asking for oprid.
I don't understand how then all the doc./papers on internet i read, to create Report using XML Publisher says/shows the report appears in user menu(query report viewer). May be they still using PS login to show the output?
Anybody have any idea where am going wrong?
The category,datasource,Definition,query tree all set properly. Do user need any special role/permission assigned?
BTW user can see the query report viewer menu.
Regards!
Edited by: user10569054 on Sep 27, 2012 2:32 PM
Peoplesoft Version 9.00
Database Oracle 10.2Thanks for the Reply.
from the doc. you gave, this is what i found.
Home > PeopleBooks > PeopleTools 8.52: BI Publisher for PeopleSoft > Running, Locating, and Viewing BI Publisher Reports
The Query Report Viewer allows selection and online viewing of those reports that have a data source type of PeopleSoft Query. Existing Query security applies so that each user has access to run only the reports to which he or she has qualified Query access to the data source.
The PS query and the data source is created by user PS then how can a normal user will have access to that?
I'm bit confused here.
Regards! -
Actuate Report Error in Siebel After Click on Report Name
Hi,
I am getting this error when i click on the report name. it is not showing the report.
Error Message
=============
Unable to load message 0xffff(SBL-GEN-00000)
=============
Can please anyone help for this error.
Thanks,
AsifHi,
first you the correct settings in transaction RSDIPROP for your InfoCube:
On tab 'Roll Up' you should set the flag Set Quality Status to OK Automatically.
Second delete the cache for the planbuffer query; the name of the plan buffer queries are as follows
- if your aggregation level is defined on InfoCube CUBE the name is CUBE/!!1CUBE
- if your aggregation level is defined on MultiProvider IPROV the name is IPROV/!!1IPROV
- if you are using a query on a MultiProvider containing aggregatiion levels delete also the cache of the query.
Now check the values of your query again.
Note 1136163 contains the recommended cache settings in RSRT.
Regards,
Gregor -
I just purchased the newest episode of a tv show and I selected the correct episode, but it downloaded an older episode under the new title. I don't want that one what should I do?
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the mislabelled item. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
In my MacBook Pro(10.7.5), finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see Top bar(Apple logo, Date and Wifi etc... bar). Even in safari address bar, TextEdit not accepting any text means when type something not showing up and also i am unable operate any thing from keyboard. Plz help me…..
One thing that you can try is installing a 'fresh' version of OS X Lion. Boot into your Recovery partition (holding down the command and R keys whilst booting) and elect to install OS X from the Recovery screen. You need not erase your hard drive and you should not lose any of your data.
Oh, and just as a precaution, I would use Disk Utility, once you're in Recovery mode, to verify your hard drive before trying to install the OS again.
Clinton -
Alv show in report but when see in spool (after run background job) there i
my program have some error when i run result alv show in report but when see in spool (after run background job) there is no data, (other program can see result in spool)
Please help
here is some example of my program
********************************declare internal table*****************************
internal table output for BDC
data : begin of t_output occurs 0,
bukrs type anla-bukrs,
anln1 type anla-anln1,
anln2 type anla-anln2,
zugdt type anla-zugdt,
result(70) type c,
end of t_output.
*****get data from loop********************************
loop at t_anla.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = t_anla-anln1
IMPORTING
OUTPUT = t_anla-anln1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = t_anla-anln2
IMPORTING
OUTPUT = t_anla-anln2.
check record is correct or not
select single bukrs anln1 anln2 zugdt
into w_output
from anla
where bukrs = t_anla-bukrs and
anln1 = t_anla-anln1 and
anln2 = t_anla-anln2
zugdt = '00000000'
if record is correct
if sy-subrc = 0 and w_output-zugdt = '00000000'.
w_output-bukrs = t_anla-bukrs.
w_output-anln1 = t_anla-anln1.
w_output-anln2 = t_anla-anln2.
w_output-result = 'Yes : this asset can delete'.
append w_output to t_output.
if record is not correct
elseif sy-subrc = 0 and w_output-zugdt <> '00000000'.
there is error record this asset have value already
v_have_error = 'X'.
w_output-bukrs = t_anla-bukrs.
w_output-anln1 = t_anla-anln1.
w_output-anln2 = t_anla-anln2.
w_output-result = 'Error : this asset have value already'.
append w_output to t_output.
else.
there is error record this asset donot exist in table anla
v_have_error = 'X'.
w_output-bukrs = t_anla-bukrs.
w_output-anln1 = t_anla-anln1.
w_output-anln2 = t_anla-anln2.
w_output-result = 'Error : this asset doest not exist'.
append w_output to t_output.
endif.
*end of check record is correct or not
clear w_output.
endloop.
******************************show data in ALV***************************************************
show data from file in ALV
perform display_report_ALV.
*& Form display_report_ALV
form display_report_ALV.
DATA: LT_FIELD_CAT TYPE SLIS_T_FIELDCAT_ALV,
LT_EVENTS TYPE SLIS_T_EVENT,
LV_REPID LIKE SY-REPID.
PERFORM ALV_DEFINE_FIELD_CAT USING LT_FIELD_CAT.
PERFORM ALV_HEADER_BUILD USING T_LIST_TOP_OF_PAGE[].
PERFORM ALV_EVENTTAB_BUILD USING LT_EVENTS[].
LV_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = LV_REPID
IT_FIELDCAT = LT_FIELD_CAT
I_SAVE = 'A'
IT_EVENTS = LT_EVENTS[]
TABLES
T_OUTTAB = t_output
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC NE 0.
WRITE: / 'Return Code : ', SY-SUBRC,
'from FUNCTION REUSE_ALV_GRID_DISPLAY'.
ENDIF.
endform.
*& Form alv_define_field_cat
text
-->P_LT_FIELD_CAT text
FORM ALV_DEFINE_FIELD_CAT USING TB_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: WA_FIELDCAT LIKE LINE OF TB_FCAT,
LV_COL_POS TYPE I.
DEFINE FIELD_CAT.
CLEAR WA_FIELDCAT.
ADD 1 TO LV_COL_POS.
WA_FIELDCAT-FIELDNAME = &1.
WA_FIELDCAT-REF_TABNAME = &2.
WA_FIELDCAT-COL_POS = LV_COL_POS.
WA_FIELDCAT-KEY = &3.
WA_FIELDCAT-NO_OUT = &4.
WA_FIELDCAT-REF_FIELDNAME = &5.
WA_FIELDCAT-DDICTXT = 'M'.
IF NOT &6 IS INITIAL.
WA_FIELDCAT-SELTEXT_L = &6.
WA_FIELDCAT-SELTEXT_M = &6.
WA_FIELDCAT-SELTEXT_S = &6.
ENDIF.
WA_FIELDCAT-DO_SUM = &7.
WA_FIELDCAT-OUTPUTLEN = &8.
APPEND WA_FIELDCAT TO TB_FCAT.
END-OF-DEFINITION.
FIELD_CAT 'BUKRS' 'ANLA' 'X' '' 'BUKRS' 'Company Code' '' ''.
FIELD_CAT 'ANLN1' 'ANLA' 'X' '' 'ANLN1' 'Asset Number' '' ''.
FIELD_CAT 'ANLN2' 'ANLA' 'X' '' 'ANLN2' 'Asset Sub Number' '' ''.
FIELD_CAT 'ATEXT' 'T5EAE' 'X' '' 'ATEXT' 'Result' '' ''.
FIELD_CAT 'RESULT' '' 'X' '' 'RESULT' 'RESULT' '' ''.
ENDFORM. " alv_define_field_catHi,
Check this code..
FORM display_report_alv.
DATA: lt_field_cat TYPE slis_t_fieldcat_alv,
lt_events TYPE slis_t_event,
lv_repid LIKE sy-repid.
PERFORM alv_define_field_cat USING lt_field_cat.
PERFORM alv_header_build USING t_list_top_of_page[].
PERFORM alv_eventtab_build USING lt_events[].
lv_repid = sy-repid.
IF sy-batch EQ 'X'. ----> " System Field for Backgroud..if Background use list display
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = lv_repid
it_fieldcat = lt_field_cat
i_save = 'A'
it_events = lt_events[]
TABLES
t_outtab = t_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
ELSE.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = lv_repid
it_fieldcat = lt_field_cat
i_save = 'A'
it_events = lt_events[]
TABLES
t_outtab = t_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDIF.
IF sy-subrc NE 0.
WRITE: / 'Return Code : ', sy-subrc,
'from FUNCTION REUSE_ALV_GRID_DISPLAY'.
ENDIF.
ENDFORM. "display_report_ALV -
# Question
It's not just Download Helper v4.8.3, it's also RealPlayer: the download display window shows .mp3 files downloading, but nothing shows in the folder when it is done downloading.
Also in the '''Properties''' window of Windows Explorer I '''no longer have the Details tab''', so I can't update my mp3 files with Artist, Album, Genre, etc. But the details tab does show up when I access it thru Windows Explorer.
I ran the AVG rescue disc an no viruses found. Now on '''FF3.6.15''' '''RealPlayer''' shows when I right click but then '''immediately disappears and an icon appears in the System Tray''', but as soon '''as I hover my mouse over it it disappears'''.
Does anyone have any ideas or suggestions?
How can I get this fixed? I have time-sensitive mp3s that I won't have access to anymore if I don't get this resolved in a hurry. (no pressure on you, I'm the one that's stressed about this) Can you help? Thanks so much for responding to this '''inquiry.''''''bold text'''See:
*https://support.mozilla.com/kb/Downloads+window
*Tools > Options > Privacy > Firefox will: "Use custom settings for history" > "Remember download history" -
I was given an iPhone 3G, reset it, and now have picture which I believe indicates I should connect to my computer and iTunes. Have done so, clicked download which was done, but nothing changes on the phone. I know I can only upgrade to ios 4.2 but how do I do this?
Hello challenged37,
From what you describe it sounds like the phone is in recovery mode. Try connecting the phone to the wall charger that it came with, and perform a reset then connect it to iTunes again and try:
Reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
From: Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Here is some additional info on what to do if the device still doesnt show in iTunes from the article named:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
If you see the Connect to iTunes screen but the device does not appear in iTunes, follow these troubleshooting steps if you're using a Mac, or these steps for Windows computers.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
The workbook report no authorization, but related query can show part data
Dear All,
We meet an error, The workbook report no authorization, but related query can show part data.
We have a workbook, it have 1 queries, and when we key in condition to run it, in one field we put on one more condition(Z3XXX = ' WZO' & ' WZA")(User didn't have authorization for this condition), and workbook report no authorization.
Then we checked authorization check log and it show "You do not have sufficient authorization on Z3XXX = ' WCO'.
But when we execute the related query with same condition. the query can open and show WZA's data.
I'd like to know the reason.
thanks & Best Regards,
Kent YuDear All,
We meet an error, The workbook report no authorization, but related query can show part data.
We have a workbook, it have 1 queries, and when we key in condition to run it, in one field we put on one more condition(Z3XXX = ' WZO' & ' WZA")(User didn't have authorization for this condition), and workbook report no authorization.
Then we checked authorization check log and it show "You do not have sufficient authorization on Z3XXX = ' WCO'.
But when we execute the related query with same condition. the query can open and show WZA's data.
I'd like to know the reason.
thanks & Best Regards,
Kent Yu -
Data doesnt show when report is run but shows in preview mode or exported to PDF
I have tablix and sub reports in that tablix.. When I run the report and go to the second page i dont see any data from the sub report... but if i export it to pdf i do see data in that spot...
What should i do to fix it? the page size for this report has been set for legal I have tried messing with the page size and removed the margins for the sub report...
Any help will be appreciated.
Thanks
KarenHi Karen,
As per my understanding, I think this issue can be caused by Interactive Size. InteractiveSize is used by the HTML rendering extension to provide the equivalent of Page Size. Because the HTML rendering extension dynamically resizes a report to accommodate
drilldown, drillthrough, and show/hide features, the report server uses different properties to support pagination on dynamic pages. So please check the InteractiveSize of the report, make sure it uses the same size as PageSize.
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Maybe you are looking for
-
I have 2 iPods, one is a 60GB Classic formatted to Mac the other is a 80GB Classic formatted to Windows. When either is connected to my Zeppelin Air Dock, a message appears on the iPod saying "The currently attached accessory is not supported by this
-
What Function Module can be used to create vendor master data in SAP R/3?
Hello - I've been trying to find a standard SAP delivered BAPI that can be used to create vendor master records in ECC 6.0. Up to this point I have not been able to do so. With SAP MDM solutions and SRM solutions it seems logical that SAP would deliv
-
Hi my friend gave me an iphone but on the screen it says 'iphone disabled connect to itunes
I have got an iphone 3 from my friend that had been used by his ex wife. The phone says ' iphone disabled connect to itunes. She 'cant remember her passcode' I have put the phone into restore mode and connected to itunes, ( i downloaded the latest ed
-
How to design group above report manualy
I want to design group above report manually. How can i define main repeating frame and then internal repeating frame like report builder.
-
Clear Google search history from Safari Toolbar (v.4.0.3 and up)
How to clear your search history. TEDIOUS but works. *Delete Google results pages from the history* In Safari 4.0.3 and up, you may now search your history. Search for the URL string www.google.com/search? and delete the records that match it. *Clear