MSS reports - Report to convert MDT to LPA table entries shows blank

Hi experts,
I need to add new report to mss reporting. I already transport the program and configuration to QAS server. It works find in DEV portal. But it shows error ' no object found' in QAS. I found that when I run T-Code PWPC_Conv_MDT_TO_LPA it shows blank in the screen.
Is it the cause of this problem? Correct me if I'm wrong. What should I do?
Thanks,
Rgds,
Nanie Arianie

Hi,
In the following screen its been shown perfectly
go to Tab ...MSS
ESS / MSS Configuration (SAP Best Practicesfor SAP HCM V2.600) (N06)
http://help.sap.com/bp_hcmv1600/BBLibrary/Documentation/N06_BB_ConfigGuide_EN_US.do

Similar Messages

MSS IAC reporting error?

Hi,
We created custom MSS role which has limited services from standard MSS role. So we didn't want to make any change to the standard MSS role. One of the service under custom MSS role is reporting we made it to point to reporting page(PCD as below) instead of standard LPA reporting.
pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.pages/com.sap.pct.erp.mss.hcm/com.sap.pct.erp.mss.reporting
When we assign custom MSS role to a user, user could see the report but there is a button on this report "Report status" which pops up a new window pointing to IAC reporting iView(PCD as below), this one fails because of permission denied.
pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.iviews/com.sap.pct.erp.mss.hcm/com.sap.pct.mss.hcm.rpt.iac
The permission is denied because the user do not have standard MSS role, but he only has custom MSS role. If I assign standard MSS role, the above PCD works perfectly. The above PCD is located under the standard MSS role.
How and where do I change to point to different PCD instead of standard PCD as above?
We copied the IAC reporting iView to the custom MSS role, new PCD location is as below
pcd:portal_content/com.sap.pct/line_manager/company.pct.erp.mss.bp_folder/company.pct.erp.mss.iviews/company.pct.erp.mss.hcm/company.pct.mss.hcm.rpt.iac
How can I change to this PCD for this report?
Thanks
Praveen

Hi Siddharth, where in the backend I can set new PCD path for IAC reporting?
I cannot see any property for iView PCD?
I found thread with similiar issue but it was to do with runtime error, for me I get permission denied because new MSS role is trying to access standard MSS role PCD object as said in my first post.
/thread/1394682 [original link is broken]
Please let me know where is this configured in the backend SPRO? Or is this PCD link hardcoded in the "Report Result" button?
Thanks
Praveen
Just more info on this issue, the actual PCD of the iAC report is
portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.iviews/com.sap.pct.erp.mss.hcm/com.sap.pct.mss.hcm.rpt.iac
Where as when clicking on the "Report result" button it's looking at below PCD which is inside standard MSS role
portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.roles/com.sap.pct.erp.mss.manager_self_service/com.sap.pct.mss.hcm.rpt.iac
This is why the custom MSS role is unable to access above PCD which is inside the standard MSS role. Is there a way around to point or change this PCD in SPRO or custom role level?
Edited by: Praveen11 on Jul 29, 2009 6:07 AM

Error when executing function in MSS launchpad report ???

In MSS lanchpad report, we have the following problem:
Error in Manager Sef-Service
When calling the report, the following error occurred:
System: HRP
Error when executing function
Basically in MSS report, I select employees in the first iView which calls another ABAP query in back-end to display back-end t-code inside iView of portal through ITS service. What could be the reason for it? please advice.
Thanks,
Anthony

Please try converting the standadrd-delivered scenario RPT0, then check
out the things.
Also problem may be that your function code names contain
the character '&'. This causes a problem when the selected function
code is passed to the ITS-WebGUI as a URL parameter. Please use only
standard characters (A..Z and _) when you define a function code.
Then it should work.
Please go through the following link also
http://help.sap.com/saphelp_erp2005vp/helpdata/en/3a/
3198408d953154e10000000a1550b0/frameset.htm
Please test in backend using Se38 > PWPC_RPT_START_REPORT_TEST
The Reporting Iview in the portal has the Report category type, by
the report category type is set to "RPT0". Therefore, when the
application is launched, the reporting category type is also sent as URL
parameter to the backend system. As of ECC 6.0 only the reporting
category type "RPT0" is supported. ensure this is set for your custom reports if you are using own scenarion
then set in the Iview property of reports as well
ie example
1)Change the Iview property "Scenario" of the Reporting iview from
"RPT0" to your own "ZRPT", than this set of reports will work. however,
the standard reports will not work.
pwpc_convert_mdt_to_lpa >>
The following list of reports have been converted.

AP Account Analysis Report USD not converting to Functional Currency

When I am running AccountAnalysis Report , USD not converting to SGD\
08-JUN-09 3D NETWORKS SINGAPORE PTE TI10050729 Invoice Nonrecoverable GST Yes
USD 8,395.36 8,395.36 530000844
Regards,
Ajit
Edited by: Ajit Raut on Jul 27, 2009 8:10 PM

Resolved,
==============================================
Please find below notes;
Not all reports are appropriate to run under MRC responsibility.
The reports that do not have set of books as parameter cannot show thedata in reporting currency as
sob is not supplied. So all such reportsnot having set of books parameter cannot be expected to show
the outputin reporting currency.
Refr to the document "Multiple Reporting Currencies in Oracle Applications"
Appendix A: MRC Reporting Responsibilities:
Section Request Groups (page A-8)
Extract from the document:
The predefined MRC request groups allow you to access only those reports
and programs that are "appropriate" to run when using a reporting responsibility.
Pre–defined MRC request groups are in the format MRC Programs <product code>.
Payables
=======
The following reports are available in the MRC Programs AP request group:
• Accounts Payable Trial Balance Report
• Posted Invoice Register
• Posted Payment Register
• Posting Hold Report
• Transaction Reconciliation Report
• Journal with GL Details Report

MSS CO Reports

Hi,
I do have a question regarding MSS CO reports, we have around 55 cost centres and the requirement is that each manager looks only at his own Cost Centre report.
Is there any way where i can create a role that depends on OM structure whereby the cost centre is populated from the user master record instead of creating a 55 role for each cost centre?
your help is very much appreciated.
Regards,
Aziz

I am afraid the org levels do not cover cost centres. But thanks for your help.
Regards,
Aziz

MSS BW Reporting [Beginner]

Hello all,
I'm looking into implementing BW (3.5) Reporting on our EP (7.0)'s MSS Business Package. And I don't have any idea on how to configure the MSS to show the reports in the reporting workset.
Any guides or how-to's that you can share for this? It would really help me a lot.. (Assuming I've already successfully deployed the MSS package on our EP)
Thanks in Advance.
-Jan

Hello Jan,
Please following the steps for BI MSS Reports Workset.
Go to SA38
Run Program - FPB_LP_WRITE_ENTRIES
Workset: Reports
Technical name: com.sap.pct.erp.mss.reports
Use
This workset contains a collection of reports that are relevant for a manager.
Features
The Reports workset contains the Report page with the following iViews:
Launchpad (com.sap.pct.erp.common.reportlaunchpadpcd)
This iView is part of the Business Package for Common Partsand is called using Delta Links. In the delta link, the following application parameters are defined:
○     role=MSS
○     instance=REP
○     display_external=X
Balanced Scorecard Elements (com.sap.pct.erp.mss.balanced_scorecard_elements)
Reports in the Launchpad
BI content includes Web templates that are used to display reports in the Launchpad. To add the Web templates to the
Launchpad as example entries, execute the program FPB_LP_WRITE_ENTRIES with the MSS role and the REPinstance.
Irrespective of the logon language, the program adds example entries with descriptive texts in English. The example entries provide you with an indication of how you can use the Launchpad. In Customizing for the Launchpad, you can tailor the example entries to suit your requirements.
Some of the Web templates are also available as iViews in other locations within MSS:
Cost Centers u2013 Cost Pools under Budget
Budget Consumption: Overview under Planning
●     Headcount under Team
●     Headcount FTE under Team
For information about a manager's personnel area, you can also integrate Manager's Desktop reports in the Launchpad. For more information, see HCM Reports.
Please find the list of BI reports used in Portal for MSS
1. Quarterly Results by Profit Center
This report shows the costs and revenues, together with theprofitability, for each quarter on your profit centers accordingto period accounting.
2. Results by Profit Center and Manager
This report shows the revenues, costs and profitability for eachprofit center together with the name of the responsible manager.
3. Cost Centers: Cost Blocks Graphic
This report shows the actual and forecast values for the main cost blocks on your cost centers in graphical form.
4. Cost Centers: Cost Blocks
This report shows the costs, commitments and forecast for eachcost center together with the name of the responsible manager.
5. Cost Centers: Operating Expenses
This report shows the planned and actual expenses for your costcenters by period and year.
6. Cost Centers: Planning Data
This report shows the data planned for your cost centers by costelement, statistical key figure and activity type.
7.Orders: Operating Expenses
This report shows the planned and actual expenses for yourinternal orders by period and year, together with the associatedbudget.
8.Projects
This report shows the internal orders used to represent theprojects together with the planned costs, actual costs andcommitments for the project.
9.Headcount
These reports shows the headcount for the organizational unitsyou are responsible for and by time periods you select. Thefollowing information is given: Headcount in full numbers,headcount expressed in FTE, the employee entries and leavings.
10. Illness/Overtime
This report shows overtime and illness time and cost infomationfor organizational units you are responsible for and by timeperiods you select.
11. Employee Availability
This report shows the availability of employees in a particularrole together with their assignments, working time and pay ratesby organization and service area.
12.Employee Utilization
This report shows the absences (availability) and assignments ofemployees in a particular role by organization and service areaon a daily, weekly and monthly basis.
13. Qualifications
This report shows the assignments, demands and the resourcesqualifications required by an assignment.
Points if helpful
Close thread if problem solved
Thanksyou,
Regards
Vijai

MSS Approval Report Links to Busines Workflow Task in UWL

Hello All,
I have a scenario below that I'm hoping you can help.
I copied the standard business workflow task "TS31000007: CATS Approval by Supervisor" to create our own task (general task) and link the 'CatManagerApprove' application and 'sap.com/msscatapproval' package to this task in the Workflow Visualization Configuration.
We then assigned this new task to the time data entry profile for the portal. Once, employee released the working time, the task is created and send to the Universal Worklist.
The manager can then access the UWL and open this approve time workflow task. This task is open to the MSS Approval Report (similar to what appear under the MSS > Tasks > Approve Time by Manager).
However, I have copied the Approve Time by Manager to our own and changed some of the order of the column and header text and assigned to the MSS role.
I would like to have this CATS approval task open to the same approval report view/layout as in the MSS Approval Report.
I've tried to change the layout (column order) through portal contents of the standard MSS Approval Report because I thought it was reading from there, but it's not.
Does anyone know how this can be done or where to point to the MSS Approval Report on the portal.
Any help would be appreciated!
Tam

Hi Karri,
We were able to use the launch iview task to launch our specific iview but I cannot seem to get it to recognize the workitem. In other words, when I click on the task in the UWL, my approve working time iview appears but it does not have the data that is from the workflow task item. Attached is the XML code that I used:
<ItemType name="uwl.task.webflow.TS93000001.SAP_ECC_Financials" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchIView" executionMode="default">
      <ItemTypeCriteria systemId="SAP_ECC_Financials" externalType="TS93000001" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchIView" groupAction="" handler="IViewLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="page" value="pcd:portal_content/net.saccounty.SacCounty/net.saccounty.approve_ts_data"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
            <Property name="workitemId" value="${item.externalId}"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
I thought the line <Property name="workitemId" value="${item.externalId}"/> would pick up the work item ID, but it is not working. Any suggestions?
TS93000001 is our task. approve_ts_data is our iview. It opens in a new window correctly and goes to the correct iview, just is not the actual task data.
Thank you,
Mark.

The BMC reported failure in converting the document

Hello,
I have a problem with PDF generator. I launch a workflow with an attachment which contains a Word or a .ppt document. That document is sometimes well converted. But sometimes it is not well converted and a .log file is generated in the out directory. The .log file contains the following message:
Failed to process job DDLaunchObject-2006-08-08 13-22-40.102.doc
Error Code: 1,011
Reason: The BMC reported failure in converting the document.
Is anyone could help me?
Thanks a lot.

I had the same error so I checked my log file and noticed it was looking for Acrobat.exe which didn't exist.
I guess what happened was I had Reader 8 installed before I installed PDFG. It didn't install Acrobat for some reason so I uninstalled Reader 8 and PFG and then reinstalled PDFG. Seems to be better now.

MSS BW reports

Hi gurus,
EP 6.0 SP20
R/3 4.7
BW 3.5
BP 60.1
I have a few issues configuring the BW reports in MSS. Apart from condifuring SSO is there antything else thatis required to configure the MSS BW reports.
I am getting various types of errors on various BW iView.
Error 1
1) When i click on the monitoring headcount iView, it asks me for user id password and when i enter one eventhough correcttly, it gives me the following error message
Logon failed
What has happened?
Call of URL http://sapbwdev.athlone.elan.com:8100/sap/bw/BEx terminated due to error in logon data.
Note
Logon performed in system BWD .
Logon performed for client 148, user hr_manager , and language EN.
Error 2 )
When i click on monitoring time or skill management
it gives me the following error . I think may be becuase they do not exist or published as web reports
Error loading template 0COCKPIT_1
Error 3
From the reporting iView
when i select
BW Reports--> Headcount or Headcount FTE . I get the following error
java.lang.NullPointerException at com.sapportals.portal.prt.service.urlgenerator.specialized.SAPUrlGenerator.generateBWReportUrl(SAPUrlGenerator.java:252) at com.sap.pct.hcm.rpt_objectselection.ObjectSelectionPage.generateBWUrl(ObjectSelectionPage.java:655) at com.sap.pct.hcm.rpt_objectselection.ObjectSelectionPage.onStartReport(ObjectSelectionPage.java:465) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172) at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:115) at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:153) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37) at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Can any one guide as to what the issues could be and if there is anything else to do

Can you please clarify this
I dont know why so many things are going on.
Can pl do a simple check to isolate your problem.
- Is SSO to BW system working fine using SAP GUI for Windows ?
I assume you have created the System and met all the prequisites (like same user id and other steps)
Go to Support>SAP App.>SAP Trans-->Select WinGUI for testing.
-If it is not working you need to fix the SSO prob first.
They you have to check the SSO (to the BW System)using WebGUI .
Again Do you really need WebGUI to use your BW System from Portal ?
You have maintain the ITS related Parameters (3 parameters) in the ITS service files.Please check in the SSO config guide.
If you could update , we can go ahead fixing ur prob..
Priyabrata
What do u mean by whether we really need webgui. I mean in my case like MSS reports or a custom BW web report can i use ITS?
If i can use ITS how can I do that.
Currently we have portal, ITS and R/3 intrgrated and running. ESS MSS works fine with this stuff. Our issues started when we wanted to bring in BW reports in heneral and MSS reports in oparticular.
Please guide

MSS Manager Report

Hi
In MSS Manager Report, there is report a called Absence Quota Information. Now, the report add all vacation quota type into the report but actually, we want to have one vacation quota type to be used as deductive quota, therefore, this quota type need be deducted from total quota amount. Is there way to configure this ? Thanks for the help.
Regards,
Jim

Resolved...

How to convert MDT scenario RPT0 to launchpad

Hello,
I'm trying to turn on the reporting launchpad in MSS. I am trying to use the delivered scenario of RPT0 and I've added a new tcode function to it. When I run the IMG step "Convert MDT Data to MSS Reporting Launch Pad" I get the message that no MDT entries are found.
Why is it not finding the RPT0 entries? Is there an additional config step I'm missing? Also, I'm not sure if this relates to this issue, but the IMG step under MSS for setting up the launchpad does not exist in our system. I can't seem to find what activates it but I'd appreciate input on this if you've seen it before. I can get to tcode FPB_LP_MSS_REP_CUST if I enter it manually.
Thanks,
Eric

Hi Siddharth,
I have modified the URL of PCD page, so my record is in V_T7XSSSERRESC. Entries are below:
Directory path = sap.com/mss~rpt
Object name = LPAReporting
URL param = sap.xss.rpt.scenario=RPT0&sap.xss.rpt.viewgroup=REPORTING&sap.xss.rpt.visiblerowcount=0
Window name = _blank
URL of PCD = ROLES://portal_content/com.SFHS.SFHS_Folder/Eric_MSS_Test/com.sap.pct.erp.mss.manager_self
service/com.sap.pct.erp.mss.manager/com.sap.pct.erp.mss.reports/com.sap.pct.erp.mss.reportsp
age/com.sap.pct.erp.common.reportlaunchpadpcd_page
The URL of PCD matches the object ID of the iview details.
If I run PWPC_RPT_START_REPORT_TEST for Scenario RPT0 and Function Code MSS_HOME, it runs for a second, but then nothing happens and the screen does not change. If I only enter a scenario, RPT0, and run it I get "error when executing function".
I have used FPB_LAUNCHPAD_CUST to update MSS / REP and add tcodes SU01, CAT3, and S_PH9_46000221 as well as a URL for google.com for testing. The URL link gives a page cannot be displayed message and the tcodes give me a portal runtime error /exception message. Here is part of the message:
Exception ID:10:29_10/12/10_0011_3277051
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.common.bp_folder/com.sap.pct.erp.common.iviews/com.sap.pct.erp.common.transaction_dummy
Component class : com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent
Thanks for the help in determining the issue.

Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)

Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)?
Exemple:
Table1
Cliente name:
John
Client number:
12345
Survay number of negative answers:
3
Table2
Questions and answers that were negative:
Question: How much time where you waiting
Avaluation: 3 (from 1 to 10)
Answer: They only called me 1 mouth later
Can you please help me?

Hi,
Based on the description, I understand that you want to add subreport in the main report. When previewing the main report, the subreport can be shown in detail. Please see the screenshots on my test:
In Reporting Services, we can create parameters and pass them from main report to subreport in order to control the data dynamically.
References:
Subreports (Report Builder and SSRS)
Add a Subreport and Parameters (Report Builder and SSRS)
If I have any misunderstanding, please feel free to contact me.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Problems with Page Break in an Interactive Reporting report

Hello everybody,
Platform: Hyperion System 9.3.1.
I have serious problems in managing the 'page break' in an Interactive Reporting report.
The report shows sales data by store, with article and colour details and it is organized like this:
group 1: geographic area
group 2: country
group 3: city
group 4: store
columns: article, colour
facts: quantity, price, value
My client's request is to perform a page break at the store group level, meaning that apart from the first store occurance, any change in the store value shoul start a new page.
The requested result is like this:
page1: geographic area1
country1
city1
store1
data store1...
page 2: store2
data store2...
page3: store3
data store3...
I tried several combinations of using Break After and Break Before on the store group, with Keep Next / Keep Together and it was impossible to obtain the desired result.
If I use Break Before the result is as follows:
page 1: geographic area1
country1
city1
page 2: store1
data store1...
page 3: store2
data store2...
If I use Break After the result is as follows:
page 1: geographic area1
country1
city1
store 1
page 2: data store1...
store 2
page 3: data store2...
even if I specify 'Keep with next' or 'Keep together' for store group and the store data table.
Any help will be very very appreciated because I've been trying for weeks to figure out this issue.
Daniela

First start without using any of the Keep with Next and Keep together.
Second. try putting the Page Break in the Group Footer. You do not need to keep it visible
Then you may want to repeat headers on Store in case the Store's Detail rolls onto next page
Hope this helps
Wayne

Adding a Crystal Report (report or layout) in a specific menu location

Hi,
i want to import a CR Report through SDK.
I found an example in the sdk help center. You can find it searching 'Adding a Crystal Report (report or layout)'.
It works but going in the Report and layout manager i find it under 'Lost Reports'.
i cannot find a way to specify the MENU LOCATION just like the Import Wizard allows.
Can anyone help me?
Thanks
Paolo

hi how you solve this??

Conditional display in a SQL-Report/Report Region

Hi,
here I have an example for "Conditional display in a SQL-Report/Report Region". I figured it out in Firefox 3.6.2 using Firebug as development tool on Apex 3.2.1.00.12.
First you have to put the following javascript code in the Page HTML-Header:
<script type="text/javascript">

</script>
Maybe you have to modify the "vd_getBody" function. I'm searching the table cell with having the class "t10data". When you use another theme, there's maybe another class used.
Second is, that you set an static id for your report region. I prefer this structure:
R<app-id><page-id><seq> (Raaaaappppsss) e.g. R094260001010.
First example is to turn off the onMouse-Effect. Maybe on the first or last column definition you put this code in the "HTML-Expression" area:
<script>ex_conditional_tr('R094260001010', #ROWNUM#);</script>#ID#This will call the example function ex_conditional_tr with the parameter
a) the region id
b) the rownum (as oracle always starts with 1 this is the first data row [rownum=0 is the table header row])
Second example is the conditional formatting of a table cell. Put this in the HML-Expression area:
<script>ex_conditional_td('R094260001010', #ROWNUM#, #COLNUM#-1);</script>#ENAME#This will call the example function ex_conditional_tr with the parameter
a) the region id
b) the rownum
c) the cellnum (here we have to subtract 1 to get the "real" cell index)
The "ex_conditional" functions are just a representation of how to get the row or cell node.
Hope this help a bit.
Tom

I would use a CASE statement in the select....
each CASE would be an img src tag for a different button if the button is an image.
does that make sense? I can include an example if you would like...

MSS reports - Report to convert MDT to LPA table entries shows blank

Similar Messages

Maybe you are looking for