MSS Requisitions is not moving to Recruiter's POWL and system is throwing the errors.

Hi everyone,
Hope all are doing in good spirit.
I have an issue in regards with Requisition Creation and its related process.
I am working in Standalone architecture where Recruiting server is in another instance apart from HR system.
We are using WS45600028 standard workflow.
When Manager submits the Requisition to higher level manager to approve, its done successfully and the notification is going to the Manager. But after approval, Requisition is not going to Requiter's POWL queries.
I have maintained Support Group, Lead Recruiter in it and assigned this to Requisition.
I have checked HRP5131 table. But there is no SOBID which sould be flaged as Lead Recruiter.
When Higher level Manager approves the Requisition, It is successful bu there is an error in slg1.
Error: Error when ending the Work item 0000007704 in HR system.
The system returned the call of interface SAP_WAPI_WRITE_CONTAINER in this context
System Response:
Call ended with an error. The function was not executed.
Procedure: Remove call.
At the same system is throwing the error for the User (This user is used for RFC creation using with transaction SM59): No candidate for this User.
Details of error: The error occurred in program CL_HRRCF_CANDIDATE_ADMIN_BL===CM00B line 77
Procedure for system administration:
Check the context in which the error occurs.
Since it it probably program error and not an input error, you should contact SAP.
Can you please look into the above issue and address me if you have any solution for the same.
Any help would be greatly appreciated.
Thank you.
Regards,
Sekhar

Hi Nicloe,
Thank you very much for your response.
I have done the data transfer from HR system to E-Rec system through ALE iDoc using PFAL.
All the is transferred and corresponding NA, CP, BP generated in E-Rec for P.
All the users(Recruiter, Managers and Recruiting Admin) data have transferred to E-Rec System.
But when Manager is creating the Requisition Request, it going to his higher level manager for approval and its been approved successfully. Later it is not updating the Recruiter's POWL.
In DB table HRP5125 Requisition data is created but with only few details like Start and End date, Object ID. in E-Rec system.
In HRP5131, NB related data is there but there is no SOBID for lead Recruiter.
Immediately i am getting errors in both HR and E-Rec systems as follows after the Requisition got approved.
In HR system, Error when ending the Work item 0000007704. Workflow completed successfully but still here is an error.
In E-Rec systemThe error occurred in program CL_HRRCF_CANDIDATE_ADMIN_BL===CM00B line 77.
And system says, Since it it probably program error and not an input error, you should contact SAP.
I heard that there might be an inconsistency in NA, BP, CP when we do PFAL transaction for data transfers. Can you suggest me to raise SAP ticket in this context?
Or Did i miss any configuration in this connection?
What can be done now to fix this? I am working EHP 5 and SP level is 11.
Can you please let me know. Kindly help me out of it as i am struck with this since very long time.
Thank you.
Regards,
Sekhar

Similar Messages

  • I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "

    I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
    THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
    Help!

    If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
    This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
    Is this what you bought?
    You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

  • HT201365 How do I download Whatsaap, Facebook and Skype into my home screen. When I try it gives me an erros message saying that this is not available in a Panamanian store and I live in the US. HELP????

    How do I download Whatsaap, Facebook and Skype into my home screen. When I try it gives me an erros message saying that this is not available in a Panamanian store and I live in the US. HELP????

    Change your country on iPhone, iPad, or iPod touch
    Tap iTunes Store, App Store, or iBooks Store.
    At the bottom of the Featured page, tap Sign In.
    If you're already signed in, skip to step 5.
    Tap Use Existing Apple ID.
    Enter your Apple ID and password and tap OK.
    Tap your Apple ID.
    Tap View Apple ID or View Account.
    Tap Country/Region.
    Tap Change Country or Region.
    Tap the Store menu and tap your country.
    Tap Next.
    Review the Terms and Conditions and Apple Privacy Policy.
    Tap Agree if you agree to the terms and conditions.
    In the prompt that appears, tap Agree.
    Select a payment method and enter your payment information.
    Enter your billing address and tap Next.

  • I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days

    Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days, is there any problem ideally or, please leave a reply
    <Email Edited By Host>

    Hi vivekanandanganesan,
    Thanks for using Apple Support Communities.  This article has some steps you can try if you are unable to connect to the iTunes Store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers,
    - Ari

  • Satellite Pro M10 will not boot again and comes up with the error message

    My Toshiba Satellite Pro M10 notebook will not boot again and comes up with the error message "load error" when I push the power button.
    The problem arised after installation of "symantec system works" and trying to restart windows XP professional to make the installed program executable.
    What can I do to get the notbook restart again?

    Hi everyone
    If you cannot acces to the boot menu by pressing F8 you can try to recover the the master boot record from Windows Xp professional installation Cd, to do this:
    Attention: don't run these commands if you have more than one operating systems running in your laptop.
    Boot from Windows Xp installation cd
    Choose repair installation from console by pressing "C" key.
    A console will open asking you for administrator password, insert the password and press enter.
    Run de command: FIXMBR (It will write a new boot record)
    Run de command: FIXBOOT (It will write a new boot file)
    Restart the laptop and now windows should start without problems.
    Regards

  • I just set up a new computer running Windows 8.1. When I go to my icloud photostream, the pictures are in PNG format NOT JPG. When I open and upload photos from the photostream, the resolution is so low that the image quality is terrible. Help?!?

    I just set up a new computer running Windows 8.1. When I go to my icloud photostream, the pictures are in PNG format NOT JPG. When I open and upload photos from the photostream, the resolution is so low that the image quality is terrible. Help?!?

    Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.

  • I wanted a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser.  Unknown Error. (123)"

    I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12  file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser.  Unknown Error. (123)"

    Change browsers. See what happens.
    Be well...

  • I recently downloaded the latest iTunes and now keep getting the error message "A required iTunes compnent is not installed. Please re-install iTunes (-42404).  I have re-installed 10x and still no luck.  iTunes will not sync with my iPad.  Can anyone hel

    I recently downloaded and installed the latest version of iTunes and now keep getting the error message "A required iTunes component is not installed.  Please re-install iTunes (-42404)".
    Since this, my iPad will not sync, despite resetting it many times.
    I have downloaded and installed the new iTunes more than ten times with no luck.
    Please can anyone help!!!!!!!

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

  • How do you have Google searches appear in new tab? This was previously not a problem, but it changed and I cannot return the setting. Any ideas?

    How do you have Google searches appear in new tab? This was previously not a problem, but it changed and I cannot return the setting. Any ideas?

    I recently purchased a second hand new macbook air, although it was second hand to me the previous owner had never actually turned it on.
    Something doesn't make sense here, though I'm not saying the previous owner is lying....
    Time to send your serial # to iTS and let them see what's happening here.
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. I anyone able to give me a hint how to handle it? Thank you ind advance Karl

    I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. Is anyone able to give me a hint how to handle it?
    Thank you in advance
    arl

    Hi Keith, sorry for my late reply.
    Surely I am able to connect to the help function when Icontact the website
    of AdobeLR5.The problem is as follows,
    When I open LR5 on my computer and work with it and try to open the help
    function in the software, I don't get it.
    When I bought the CD I was naiv enough to believe that I get an independent
    working software. I learned in the meantime, that the seller does not allow
    to work with, without being connected to them.
    I don't believe that I am paranoid, but I like to buy something and use it
    without to inform the supplier that I do it. Otherwise I could have bought
    the license fpr LR5 via internet.
    Best regards
    Karl
    2015-01-02 13:42 GMT+01:00 kglad <[email protected]>:
        I bought a cd with Lightroom 5. After installation and registration I
    am not able to use 'help' function and I cannot update the software. I
    anyone able to give me a hint how to handle it? Thank you ind advance Karl
    kglad <https://forums.adobe.com/people/kglad?et=watches.email.outcome>
    marked Keith_Reeder
    <https://forums.adobe.com/people/Keith_Reeder?et=watches.email.outcome>'s
    reply on I bought a cd with Lightroom 5. After installation and
    registration I am not able to use 'help' function and I cannot update the
    software. I anyone able to give me a hint how to handle it? Thank you ind
    advance Karl
    <https://forums.adobe.com/thread/1669640?et=watches.email.outcome> as
    helpful. View the full reply
    <https://forums.adobe.com/message/7059196?et=watches.email.outcome#7059196>

  • I ordered a ringtone that came as a song and did not appear in a position to be added.  It did not show up but came through as a song and asking me to add it to a playlist.  This is not what I wanted to do and I promptly follow the prompt to "Buy"

    I ordered a ringtone that came as a song and did not appear in a position status to be added.  It did not show up but came purchased as a song and now asking me to add it to a playlist.  This is not what I wanted to do and I promptly follow the prompt to "Buy more options" to get what I thought was a ringtone.  Please help!

    The ONLY place to buy a ready made ringtones is from the iphone itself from the itunes app, then "More">"Ringtones"
    If you bought from your computer, then you need to create the ringtone.  You can create a ringtones from just about any song/sound file for free.
    Google will find several ways to do this.

  • HT1176 My airport TM will not backup and i keep getting the error msg "Time Machine couldn't complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

    My Airport TM will not backup and i keep getting the error msg "Time Machine couldn’t complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

    My Airport TM will not backup and i keep getting the error msg "Time Machine couldn’t complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

  • I have the new iphone and thought I could download Netflix but only found "Netflix Instant's  Best Movies" in the apps. I pay for Netflix monthly. Is it not possible to download it here and use it on the iPhone?

    I have the new iphone and thought I could download Netflix but only found "Netflix Instant's  Best Movies" in the apps. I pay for Netflix monthly. Is it not possible to download it here and use it on the iPhone? Insight appreciated.

    TJBUSMC1973 wrote:
    The iPhone is working, as designed and advertised.  In this case, the user failed to educate themselves properly, either by proper research or asking the right questions, before purchasing the device.
    I understand that the OP failed to do research. But then, I wasn't replying to the OP. I was replying to Chris. I have Verizon. I can talk and use data at the same time with my Droid Maxx. Therefore, the problem is not just with the network. It would be technically possible for an iPhone to do that on Verizon/Sprint if Apple had chosen to use a different chip, such as the kind other phone manufacturers have elected to use.
    Of course, this is probably all irrelevant to the OP's issue. It was merely a point of clarification, especially for those people who are used to being able to use both voice and data at the same time on Verizon. When they switch to an iPhone, they are often surprized at the limitation.
    Best of luck.

  • My macbook pro is frozen, the mouse moves, but it will not click.  I have restarted and it is still the same... Can anyone help me ?

    my macbook pro is frozen, the mouse moves, but it will not click.  I have restarted and it is still the same... Can anyone help me ?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Maybe you are looking for

  • Is there any java File Poller class example??

    Dear Sir: My project requires to write a java class to perform something like File Poller function, ie. this File Poller Class will monitor some remote or local location/directory, then when some files were dropped in this location, File Poller Class

  • ILife 06... alright except for a few things

    I just got my copy of iLife 06 and I am pretty pleased so far. There were a few problems during installation though. First, my dock went back to the original one. Not a big deal, but it made me think something bigger was going on. Next, Safari went b

  • Using SET DATEFIRST inside a function to call into a view

    Hi, I need to use the statement SET DATEFIRST inside a function. This operation is not available, but I need to use this command into a function to call inside a view. How can I solve this issue? Thanks

  • How to put paypal form in Muse?

    Hi guys newbie questions again How to put paypal form in muse? the widget button i place in my site doesnt work, is there a proper way to follow? the site is here: http://www.loveinlife.sg/how-to-support.html Please help thanks Orzalan

  • Finde min oder max in Zeitabschnitt

    Hallo alle zusammen, ich war schon lange nicht mehr hier. Ich bin gerade dabei ein VBS zu entwickeln, um dyn. Delay Zeiten einzelner Meßsignal auf ein Trigger Signal zu synchronisieren. Mein beliebtestes Hilfmittel ist z.Z. DIAdem 2010 unter Window 7