MSS Team View evaluation path for non chief positions (s-s)

Hello,
We have a problem with display of employees under non chief manager - reporting managers (connection A002). In our organization we have line managers and under them team managers who are leading team of employees. Those managers want to see their employees under MSS Team View iView.
I have checked forum posts and try to create correct evaluation path but i didn't get results yet. I have created 2 evaluation paths:
Z_MANG (copy of SAP_MANG):
10 *     B 008      S
20 S    B 002      S
30 US  A 208 P
Z_S-S (copy of MSSDIREC):
10 S  A 002     S
20 S  A 008     P
30 S  A 008     US
I also included them into rules so:
Root rule (rule 1) - Z_MANG
Target rule (rule 3) - Z_S-S
I have also done customizing under Object and Data provider and if I choose standard evaluation paths (e.g. SAP_MANG and MSSDIREC), I get employees shown - if I give manager a hat (A012 connection).
Could you please help me with advice, where am I wrong? I think that first evaluation path (Z_MANG) is ok and it finds non chief manager, maybe is a problem with second one that don't show employees?
Thank you for answers in advance.
Best regards,
David

My first suggestion was either use Bottoms-up approach or top-down dont use both..like either use either of below
S A 002 Reports (line) or
S B 002 Is line supervisor
but figured u will still have depth issues..so therefore
you cld experiment like below..i understood your requirement, and i am suggesting this totally off-hand thats on top of my head..as i said experiement doing this way..
say you have four levels  why dont you use different evalutaion path to link them between each level..
say 1st to 2nd (reports to A002)
      2nd to 3rd (subordinate to A005)
      3rd to 4th/4th to 3rd (Is line supervisor B 002 )etc
this way you will not have the depth issue as each one is diffeent Ev path..
...oops i can see people laughing at this solution..but well..i tried!

Similar Messages

  • Can MSS Team Viewer for HR Users to See All Org?

    Hi MSS Expert:
    Our company has modified R/3 MDT scenario that specially give HR users to display all org structure and run reports through PPMDT.  We're now implmenting MSS 60.1, backend ESS 5.0, after configured the objects and data provider that's derived from MDT evalution path, we can not overwrite the team viewer that can give HR user to have full access to entire org structure view.  Is MSS team viewer only limited to line manager who has chief position?  Or can it be configured to adopt both line manager and special HR users?  Any guidance will be greatly appreciated.
    Helen

    Hi Helen,
    being chief is a pre-req for MSS..You can create custom function modules & evaluation paths to bring in different levels of employees in to the Team Viewer.. but cannot give access to a special user... one has to be a chief of an Org Unit to get access to MSS..
    Regards,
    Suresh Datti

  • Employee search in MSS Team view

    Hi,
    Our requirement is to add a new criteria (employee by cost center) to the search criteria drop down in MSS Team view.
    I have done the following steps in Object and Data provider node in spro-
    u2022     Define rules for object selection
    u2022     Define object selection
    u2022     Define organizational structure views
    u2022     Group organizational structure views
    The new criteria is now visible in the dropdown, but on selecting the dropdown value no fields for input of cost center are displayed. Are there any settings that need to be done to define the input fields? If yes, what are these settings and where do I do them?
    TIA.

    Hi Diana,
    Now I see the problem. And I dont think it is possible.
    I recoment you to look at class CL_HRWPC_SEARCH_VIA_SELID. This class used by MSS for employee search. You can see it in IMG Define object selection. Copy and try modify it or find ther class you can use. I hope will work without any modification in NWDS.
    All I did was definition rules for object selection where I put my FM for object selection. I did not enter any values the searsh was in the FM.
    Evgeny

  • MSS Team View change Bizcard Text

    Hello,
    We are implementing MSS Team View on Portal. And want to change the Home No. text in the Bizcard displayed when the Manager hovers over the employee.
    Any help would be highly Appreciated.
    Please refer to the screen below:

    Hi Rohit,
    there is a customizing activity where you should be able to change the text.
    Go to Personnel Management --> Manager Self-Service (Web Dynpro ABAP) --> Organizational Chart Visualization --> Configure Organizational Chart Visualization
    If you don't have any customer specific entries, the standard customizing can be found under "Check standard organizational chart configuration"
    Select the MSSBIZVIEW entry
    Go to the structure MSS_EMP_HIER:
    And then to the MSS_TMV_BIZ_NAV navigation field group (as you want to change communication settings here)
    If you then open the navigation fields, you should be able to edit the text that is shown:
    Hope this solves your issue and helps.
    Regards,
    Marc

  • Evaluation path for B002 - OOAW

    Hi
    I'm creating a evaluation path for fetching all reports under a line manager. Can someone please throw light on how to configure thie in OOAW. It works fine SAP_MANG, I tried to modify but iam not able to get this.
    - Aravind

    Hi,
    B002 is normally used as an O-O relationship.  If you look at evaluation path O-S-P in OOAW.  You will see how it is used here.
    O-S-P might actually meet your requirement.
    let me know.
    thanks.
    JB

  • Help to evaluation path for ESS

    Hi
    I have to make a report/list in the portal, where an employee can see i.e. the birthday of all the colleagues directly under the employees manager.
    Is there a standard evaluation path for this ? Or can someone point me in the right direction (and remember I am new to evaluation paths)
    Thanks
    /Jakob

    Hi Siddharth 
    Thank you for your reply.
    I have created the evaluation path as you described, but when I test it using PPSS, with the following data :
                                                                                    Objekttype           P   Person                                               
    ObjektID             00032422      ib                                         
    Betegnelse           ib, ibsen                                                                               
    Evalueringsvej       Z_ess_co  Test af at finde hvilke objekter der er løn på t
                                                                                    Behandlingsperiode   28.09.2008  til  31.12.9999                                                                               
    Where the person "00032422" is part of an organization with several employees. I was expecting a list of employees directly under the manager of employee "00032422".
    Anything I have misunderstood or done wrong?
    Thanks
    /Jakob

  • Evaluation path for team calender in MSS

    Hi Experts,
    I need to configure an evaluation path as follows.
    1.  A manager  M1 belongs to org unit O1. He manages Org unit O2.
    2.  Org unit O2 reports to O1. similarly O3 also reports to O1.
    3.  Now I need to develop a evaluation path in which, M1 should have visibility to all employees from both O2 and O3 in his MSS..
    I have tried out many combinations with A002 and B002 relationships. but it not working.
    So could you help me to build this evaluation path.
    Thanks
    Sameer

    there are standard evaluation paths available which should fulfil thsi requirement
    Check SAP_MANG
    SBESX
    MSSDIREC
    You can use report report RHSTRU00, to check your own path

  • Evaluation path for MSS role

    Hi all,
    Is there a way to assign MSS role dynamically to an employee if he has employees reporting to him?
    We have got to know that this can be achieved by configuring some evaluation path.
    Any pointers would be appreciated!
    TIA!

    Diana,
    Where actually do you assign the roles ,is it in the portal or you have a CUA system where all the role maintenance is done over there.if second one is true you can write a custom program and assign the role by checking the direct reportees
    Thanks
    Bala Duvvuri

  • Evaluation Path for View of Organizational Structure

    Hi all,
    I am trying to define new VIEWID using EVPATH which would do the following filtering (by using f.m. HRWPC_GET_NAV_SUBTREE): giving org.unit number, it would return employees of current org unit and in case that there are some sub org units  which dont have the boss also all employees of those org units and in case that the sub org. unit have the boss only the boss.
    I saw there is Evaluation path SBES, which shows me the employees of given org unit, or SBESX which gives all including suborgs, but I cannot find Ev. path which will do more complicated conditions.
    I can see EVPATH only on T778A table with short description, is there any other way to see them with more details?
    Thank you and best regards,
    Anna

    Hi Anna,
    You will find all the existing eval paths in table T778A itself.
    I am not sure if you have seen the individual maintenance too.
    You can also create your own eval paths acc to your requirement too.
    But as far as i know all the things wrt to eval paths can be managed there itself
    Hope it helps!
    Regards,
    SR

  • Evaluation Path for Position to Position Reporting Structure

    Hello Everyone,
    We currently have a position to position reporting structure in place.  WIth this being said, not every supervisor in our organization is the chief of a team.  I am trying to create an evaluation path that will look at a position, then go up to get the positions report to position (but not go up any further), then go down to get the positions that report to the supervisor.  This will allow us to start with a position, then return all the positions that the report to position has.  In essence this will allow us to start with a position and get the team (though we don't have an org unit for the team).  I am trying to do this for the Team Calendar in ESS. 
    Below is what I have.  The problem is with the depth, if I enter a 2, then it is not getting the lateral positions, but if I enter a 3, then it goes up to another level and gets an additional supervisor (which I do not want).
    S     A     002     Reports (line) to     2     S
    S     B     002     Is line supervisor of     1     S
    S     A     008     Holder     3     P
    Has anyone developed and Evaluation Path that does this (gets a positions team without having an org unit) and can offer assistance?
    Best Regards,
    Scott

    My first suggestion was either use Bottoms-up approach or top-down dont use both..like either use either of below
    S A 002 Reports (line) or
    S B 002 Is line supervisor
    but figured u will still have depth issues..so therefore
    you cld experiment like below..i understood your requirement, and i am suggesting this totally off-hand thats on top of my head..as i said experiement doing this way..
    say you have four levels  why dont you use different evalutaion path to link them between each level..
    say 1st to 2nd (reports to A002)
          2nd to 3rd (subordinate to A005)
          3rd to 4th/4th to 3rd (Is line supervisor B 002 )etc
    this way you will not have the depth issue as each one is diffeent Ev path..
    ...oops i can see people laughing at this solution..but well..i tried!

  • Reg MSS Team Viewer

    Hi,
      We have implemented MSS 60.1 in Enterprise Portal SR1. We have customized reports for Manager screens in R/3. We published the reports as IAC in EP. My Question is whether we can integrate the customized report with Team Viewer such that manager will select the per no from team viewer iview and IAC view will reload the report for that Per no.
    Thanks in Advance.
    Regards
    Vasudevan Gopalan

    Hi,
    You can probably do it using the PCD page or PCD service options in the Column Definition of  Object & Data Provider in the backend(SIMG_SPORT).
    Good Luck,
    Suresh Datti

  • MSS: Team View Drill Down Capabilities

    Hi all,
    Is there a way that you can be able to drill down through employees in the Team View?  I'm trying to figure out if when employees are loaded, if they are a chief, the little + sign shows up beside the photo, and you can then drill down to see who reports to that manager.
    Hope this makes sense.
    Cheers,
    Kevin

    Hi Siddharth,
    Here is a picture of that screen.  I have covered up the names.  But as you can see, the pictogram for the org chart is coming in.  I did choose the Person pictogram for the employee, but as you can see, it is not there.  Somewhere in the code, the pictogram reference is being deleted.  I'm not sure where, but doesn't make sense to me.  Whe you hover over, information on the employees and the org are coming up.  I would still like to get this to work.
    Cheers,
    Kevin

  • MSS: Team View Data drop down auto refresh

    Hi all,
    I'm trying to figure out if it is possible in the Team View for MSS to be able to automatically refresh the Team View when the drop down changes.  Right now, when a user chooses the Display drop down (Employees or Org Units and Positions, in our case), the Data drop down options automatically refresh, BUT, when you choose an option from the Data drop down, nothing changes on the screen.  You have to click on the refresh button on the screen, and it will then update.
    We have played around with the C_REFRESH and G_REFRESH options, and we get a refresh button in the Team view, but nothing happens with the drop down. 
    Anyone have an idea as to what can be done to force the refresh on the Data drop down option?
    Hope this makes sense!
    Cheers,
    Kevin

    Ok, so I have figured out how to get the refresh to work the way I want it to.  I had to call wd_comp_controller->fill_object_node( ) in a post exit and the screen refreshes the way we are looking for. 
    Cheers,
    Kevin

  • MSS: Team View data refreshing itself in background

    Hi all,
    I'm running into another issue with the Team View.  I have created a custom routine that takes the information stored in wd_this->mt_hierarchy_data, and removes information that I don't want displayed on the screen.  Right now the routine works when the view loads, and when you change the Display drop down, and when you click the refresh button inside the Team View display.  BUT, when I go to drill down into another org unit, the code somewhere is resetting itself so the fields that I removed from the table are now back in there. 
    Is there somewhere on a Post-Exit that I could add my routine to modify the table.  I have tried numerous Post-Exits, but have had minimal luck. 
    Hope this makes sense.
    Cheers,
    Kevin

    If you are in latest releases we have a OADP buffer to performance optimization since you have enhanced it, i m not sure how its going to work for you 1801637 - MSS Add-On 1.0: Buffer for Organization and Position *& Object          METH CL_HIER_VIS_OADP_MSS_IMPL *&                      IF_HIER_VIS_BUILDER~GET_OBJ_CHILDREN *& Object Header  CLAS CL_HIER_VIS_OADP_MSS_IMPL

  • Evaluation Paths for Audit Requirements

    Hi,
    For requirements, which belong to the "Subrequirements" requirements category, is "A500" typically the value that one would specify for this?
    Thank you,
    Eric

    Yesterday, I defined the evaluation path as you suggested. I am still seeing problems, so I assume that I must have something misconfigured or unconfigured somewhere else. This implies that I'm probably not done bothering the forum yet....
    As far as getting the "SC" requirement selection into 4.72, it is not much of an issue for me, since we are supposed to be upgrading fairly soon, and for testing purposes, I should be able to use an eval path. I might still post an OSS message, as you suggest.
    One thing that would be nice would be a complete "changelog" to view somewhere. I can see the release notes for my version in the implementation guide, but it would be nice to see the release notes for all versions. This would allow someone to make a quick determination about what became available and when. If such a changelog already exists, can you tell me where to access it?
    Thanks again for your help, Joachim.
    Best,
      Eric

Maybe you are looking for