MSS Webdynpro Applications

Hello,
I am on EP7.0 and want to know the technical names of the webdynpro applications for MSS relating to PCR Status Overview,Reporting, Employee General Information and Time Approval...
Can any please help me with this..
Any help would be highly appreciated.

this is available on help.sap.com
refer <a href="http://help.sap.com/erp2005_ehp_02/helpdata/en/73/8eaf40a90c952ae10000000a155106/frameset.htm">leave approval</a>
There itself you can browse for name of WebDynpro applications...
for PCR application is sap.com/mss~pcr/PcrApplication
for PCR overview: sap.com/pcui_gp~isr/IsrStatusoverview
General information: sap.com/msseeproGeneralInformation
leave approval: sap.com/ess~lea/LeaveRequestApprover
Hope this helps,
Rgds

Similar Messages

MSS approval application without infotype 0008 ?

The MSS webdynpro application, which is calling functionmodule HRMSS_CAT_WD_APPROVAL, crashed with error "IT0008_NOT_FOUND".
I added the infotype in PA30 to the manager, and now the application is working fine.
However, we are not using SAP as payroll system, and really do not want infotype 0008, Basic pay, in our master data, since we have to put a value 1, into basic pay for all employees.
It does not make sense to store garbage data in the system.
How to solve this issue ?

Hi Henrik,
We are facing similar error message in the MSS team calendar. Wonder if you can let me know how the issue got resolved.
Many thanks,
Terence
P.S: issue resolved by applying SAP note 1131910 hence, no response requested
Edited by: Terence Bosco on Sep 9, 2009 5:54 PM

Question about ESS Webdynpro application's context change

Hi All,
Is it possible to add new entries into the ESS(based on ECC5.0) Webdynpro application's context especially under 'SelectedInfotype' from the back end ECC5.0 system?
Kind regards,
Vijay

Hi Vijay,
You cannot modify Web Dynpro application from backend. You need to setup NWDI for modifying Web dynpro applciation for ESS/MSS. Please refer to this NWDI Cookbook for XSS.pdf in SAP Notes 872892.
Hope it helps
Regards
Arun

Configuration and customization guides for ESS/MSS(webdynpro Java) in EP 7

Hi All,
Can anybody help me by providing the guides for Configuration and Customization of ESS/MSS(webdynpro java) in EP 7.0?
Thanks in advance.
Regards,
Shankar

Hi,
Please check the links for help
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action%3fpageid=31476
Configuring ESS in SAP Enterprise Portal 6.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a
General Settings for Self-Service Applications
Configuring MSS on Portal 6.0
Implementation and Configuration guide for ESS into Portal,Backend R/3 4.7C
Regards
Santosh

ESS/MSS webdynpro customization...........

Hi ,
I want to customize MSS WebDynpro iview in NW Developer Studio can anybody guide me for this ? How to perform this task ? If any Doc Available ?
Can i use Visual Composer also?
Thanks,
Smita

hi,
yes, FPM is the framework which all self service applications follow. Hence all the self service applications have same patterns. The thread I referred you in first reply, contains a gudd xplanation of FPM. Plus you can find the <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/b4/139525380149a49c8402e22700e4ba/frameset.htm">documentation</a> of FPM helpful.
Its a framework which self service applications follow. hence no need to separately implement it.
Is ESS/MSS deployed and running in your portal?
But still you need to setup JDI for making any code changes to ESS/MSS applications.
~cheers
avadh

Can't see webdynpro applications in webdynpro administration

Hi all,
I've installed ess and mss business packages on portal. But I can't see the respective applications nd jco connections in webdynpro administration. Any clue what could be wrong here. I am using EP 7.0.
thanks,

Hi,
Have you deployed these webdynpro applications on you server where the portal is installed?while deploying WebDynpro application, in J2EE configuration, configure the J2EE engine.
Regards,
Ameya

How to extract the code of standard webdynpro application

Hi,
We are on ECC5.0, ERP2004 ESS/MSS ,EP6
Can someone tell me, How can we get the code of a standard webdynpro application into NWDS.
( I am familiar that, to modify the standard ESS applications, we need to use JDI.)
is it compulsory that , unless and until i have JDI i can't see that code , no other way?
Regards,
NR

Hi Sharadha,
after installing the JDI, what are the steps that needs to be done to get the code of standard Webdynpro application, lets say <b>sap.com/essinfam</b>.
Can u post some links where I can get the step-by-step process of calling a Standard Webdynpro ESS application into my NWDS?
Regards,
NR

MSS Webdynpro

Hi there,
I'd like to know when SAP will deliver the MSS that runs on WebDynpro.
Anyinfo will be appreciated.
Thanks,
PL

Hi,
thanks for your quick answers.
We want to evaluate the technology :
1/ pro's and con's of this new version : how easy/difficult is it to configure? how easy is it to change the screens/process? Do we need to go into NWDS to add/delete a field of the webdynpro application?
2/ as most customers, we have a R/3 backend in 4.7 Enterprise. I have installed the evaluation version of WAS 6.40 and EP 6.0 downloaded from SDN.
I imported the business package for 'Compensation specialists'. In this business package, it contents webdynpros iviews which refer to webdynpro applications, which if I understand well, is the only missing part that we don't have. (I didn't find in this business package, the 'JSP support'.)
I suppose that to have everything work, we only need to copy/import one of these webdynpro applications which are missing. For the part of calling bapis/RFC, there is a lot of documentation, this is not a problem.
We want to know if is possible to get one of this webdynpro application as an example. It can be in the area of compensation management but it can be in another area in MSS, or in ESS as well.
By investigating this way, we want to know :
- is it possible to install only a WAS 6.4 + EP6 + import webdynpros applications to have ESS/MSS work instead of upgrading the whole system to SAP ERP 2004?
- is the missing component the ECC 5.0? And then would it be possible to have only one small piece of this for evaluation?
My questions are maybe already in the consultancy area. But any input will be of course much appreciated.
Regards,
Huy

To get login details of portal into webdynpro application

Hi All,
How to get the portal login details(user name) into my webdynpro application.
Thank you,
Harsha P.

Hi,
If you want to have portal login details from backend system (with ABAP) you should ask this question in some portal forum and ask if it is possible. This has nothing to do with workflow or UWL. Even if you get the portal user ID to the backend system, then what? Do you want to manipulate the portal roles etc. from your ABAP WD application? Then you will have even more complicated requirements to achieve with ABAP. It is not that straightforward to call different portal functionalities from backend system. You might need to do some "portal development". And eventually your ABAP WD application might come just an unnecessary wrapper component for calling some web services or whatever in portal.
Regards,
Karri

Needs a background webdynpro application running at the server side

Hi All,
We have a requirement wherein we need to have an application running all the time at the server side to capture the response coming from a web application. Based on the response that the application receives, it needs to update some backend R/3 tables.
We are thinking of a webdynpro java application.
Can anyone suggest what kind of application needs to be implemented here?
And what would be the steps required to run the application at the server side without calling the application.
Thanks & Regards,
Anurag

Hi Robin,
Thanks for the detailed explaination.
This may sound silly to you but I've another doubt which is as follows:
As you mentioned that the external web application will be sending requests to our Web service(in SOAP envelopes) and rest of the functionality can be achieved by our web service.
Actually, we are expecting only responses from the external web application. The thing is that we are sending the requests to the external web applications from our custom webdynpro application and in return the web application will be sending us 2 responses.
First response would be back to our WD java application URL(to the browser in which WD java app is running) which would get the response and display some message based on the response.
Second would be to this web service which you have just suggested. We are having two responses so that even if the browser in which the WD java application is running gets accidentally closed, the response from the external web application must get captured somewhere else and should not get lost in any case.
So, now since we are only expecting the response from the web application and we do not want any requests from the web application to our web service; how is this possible?
I am asking the above question because you have mentioned that the external web application has to request our Web service but we want is only this web service to capture the response coming from the Web application.
Or is it like the web application will send us the response string as request string to our Web Service and the web service will capture these response parameters as request parameters from the web application and do the further processing.
But in that case, we do not want any response to be sent by the Web Service to the external web application.
Please suggest if this is possible.
Once again, many thanks for the help so far.
Thanks & Regards,
Anurag

SSO b/w portal and webdynpro application customized login??

Hi,
I have one webdynpro application which has a login screen (Created as Webdynpro view). If user enters user/passord, the same gets checked from a custom table in the db (Method for checking user credtentials has been written in view controller). if user credentials are correct it performs some actions defined in webdynpro application.
I want to configure SSO b/w portal and this webdynpro application sothat when user logon to the portal and open this webdypro application, Login page of webdynpro application should not be shown i.e user credentials should be passed from portal and corresponding authentication method in webdynpro should be called to authenticate the user.
How to do the same without touching webdypro application ?
Can we call a method of webdynpro application from portal?
Regards
Deepak

1) To enable ticket authentication for the web dynpro iviews, you must maintain the definition of the system running the Web Dynpro application and set logon method to "SAPLOG"
2)Since you have customized login screen, you need to bypass this screen manually when you login from portal.
Add parameter to the application while defining the iview.Give some constant value.
Check value of this parameter in webdynpro and fire to next view.

How To Get GP Process Parameters in a Webdynpro Application runtime

Hi ,
Iu2019 ll hope you can help me to solve my problem with GP process.
Iu2019 m trying to get GP process parameters from a Webdynpro application.
I have to get parameters during the process runtime in every step of the process using
a webdynpro application with the following code:
      IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
      try {
            IGPProcessInstance processInst = rtm.getProcessInstance(processId,userContext);
            IGPProcessInstanceInfo procInfo = rtm.getProcessInstanceInformation(processInst.getID(),
userContext.getSAPUser());
            IGPStructureInfo inputstructInfo = processInst.getTemplate().getInputParameters();
            IGPStructure inputparams = GPStructureFactory.getStructure(inputstructInfo);
      } catch (GPEngineException e) {
            // TODO Auto-generated catch block
//          e.printStackTrace();
            manager.reportException("GPEngineException:"+getStackTrace(e), false);
      } catch (GPInvocationException e) {
            // TODO Auto-generated catch block
//          e.printStackTrace();
            manager.reportException("GPInvocationException:"+getStackTrace(e), false);
But printing the values of attributes with u201Cinputparams.getAttributeAs... ("param name")u201C the value returned is always 0. On the contrary if I check the same parameters structure in the runtime
GP view of the portal, the values are those that I have set in the start process wizard.
Have you a solution for this question?
Thanks in advance
Luca

hi Abhimanyu
I believe originally access to session was deliberately not made available inside WDA.
Growing security concerns due to misuse of session information and
perhaps other reasons as well.
X.509 is considered a better approach.
This may not help you in your problem.
But you may see a trend in WDA pushing more robust and client independent
approaches.
Full x.509 access should remove the need for session fiddling.
Also when developers access such session info directly, there is a possiblity
when they dont understand the technology exactly that they create a security hole.
You may know how to do safely, it is however discouraged.
Im not aware of a way to get at the session info inside the WDA framework.
Well not without a mod to the framework.
It may be possible without a mod, but I dont know the trick.
If someone has a little trick... please post.
You may need to use BSP, if your only solution requires access to the session info.
regards
Phil

Database connection in a WebDynpro Application - urgent

Hi
I am facing a problem with database connection. I am trying to develop a normal webdynpro application.
I want to retrieve data from a table and show it.
But my query is not giving the expected output. It is not even raising errors.
Please give me an answer
Thanks & regards
Aparnna

Connection con=null;
Statement st=null;
ResultSet rs=null;
public void wdDoInit()
    //@@begin wdDoInit()
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con = DriverManager.getConnection("jdbc:odbc:erdsn","root","enteg123");
st=con.createStatement();
    catch(Exception e){
    //@@end
public void onActiononClickLogin(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActiononClickLogin(ServerEvent)
     String desig=null;
try{
rs = st.executeQuery("select * from Login where Empid like uid and Pword like pw");
    if(rs.next()){
           desig=rs.getString("Designation");
     wdComponentAPI.getComponent().getMessageManager().reportSuccess(desig);
    if(desig.equalsIgnoreCase("Employee")){
          wdThis.wdFirePlugEmpOutPlug();
     else
     wdComponentAPI.getComponent().getMessageManager().reportWarning("Invalid input!");
      }catch(Exception e){

Need help in developing a webdynpro application using UWL API

Hi developers,
Iam developing a new WebDynpro application for UWL using UWL API.the functionality is to dispaly the summary of UWL like number of unread items, total items.
Iam getting the problem while deploying the application, iam getting warning while deployed the application.
I have given all possible ways mentioned in the below forum link
Re: Accessing PortalRuntime at runtime?
The exact problem is coming at reference file.
Please giude me how to move forward.
1. Below is the error when given "tckmcbc.uwl~api" in the service entry
deployed with warning :
Finished with warnings: development
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/UWLCountDemo and wait. Reason: Clusterwide exception: server ID 21763550:com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application local/UWLCountDemo for startup. Reason=Clusterwide exception: Failed to start dependent service ''tckmcbc.uwl~api'' of application ''local/UWLCountDemo''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
2.Below is the error when i gave PORTAL:sap.com/tckmcbc.uwl~api in the sharing refernce entry
Finished with warnings: development
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/UWLCountDemo and wait. Reason: Clusterwide exception: server ID 21763550:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application local/UWLCountDemo cannot be started. Reason: it has hard reference to resource tckmcbc.uwl~api with type application, which is not active on the server.
Thanks in Advance
Sekhar.
Edited by: sekhar c on Mar 21, 2009 11:24 AM

Please see Kenichi Unnai in his blog "How to use UWL API for NetWeaver BPM Tasks"
How to use UWL API for NetWeaver BPM Tasks
The .sca-file can be found on the sap service marketplace, afterwards you need to import the .sca-file, add the SC to your "MyComponents" and then you can select your necessary DC's.

Single Webdynpro Application with multiple JCO Connection ?

Hi Experts,
I have a strange requirement ......
We have a Webdynpro Application which is connected to
say (using JCO connection)
client:- A
now i want to connect the same Webdynpro application to
Client:- B which is again in the same server as the client A.
Please help me how to handle this.
how it possible to connect a single Webdynpro application to two different clients using JCO Connection.
Please help.
Points would be rewarded to helpful answers.
Regards,
Sanjyoti.

Hi experts
                    We have to use wd application for both client at a same time e.g. as follow
Client A -
> Travel app--->Featches data from A for   employee hired in client A ,in same server as B
Client B -
> Travel app--->Featches data from B for   employee hired in client B , in same server as A
we are using same EP for both client but using diffrent roles for employees of both client.
Please reply asap.

MSS Webdynpro Applications

Similar Messages

Maybe you are looking for