MSTest not running in TFS build but tests works fine locally in visual studio

Hi Team,
I have 18 unit tests in my test project wanted to run in TFS build. But build says no tests to execute. please find the below details and images for more info.
Even MSTest command is not working.
TFS : 2010
BUild Server has visual studio 2010 ultimate with SP1.
Thanks in Advance,
Shree
$hree

Hi Shree,
I am glad to hear you resolved the issue. Thanks for sharing your experience here, it is good to other members who experience the same issue in the community.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

WRT45GC - Not connecting to NTL Broadband, but internet works fine minus the router

I seem to have a problem try to get my WRT45GC to work as an accesspoint for my NTL connection. If the modem is plugged directly into my PC via ethernet cable, internet works fine. But if I plug my WRT45GC into the modem then have a direct connection to my pc from the router, i only get limited or no connectivity.
Also once this has been set up my laptop can pick up the wireless network but once again no internet.
I have been told different things by different people ie, the modem and router may have the same IP address, the router may not have DCHP enabled ( I dont have the IP address to log onto the router) please can someone help
If i unplug the router and have the modem connecting directly to the pc, internet works fine again.

if u have a cable connection....follow the steps below
1) connect the computer to one of the LAN ports on the router...and connect the modem to the router's internet port.
2) check the ip add on the computer . to check the ip add go to start -> run -> cmd -> ipconfig...ensure that u have an ip add of 192.168.1.x and default gateway 192.168.1.1
2) access the router using http://192.168.1.1 . Keep the username blank and the default password is "admin".
3) go to the "mac add clone" subtab , enable it and click clone your pc's mac..save the settings....do a power cycle
4) go to the "wireless" tab , change the ssid , channel - 1 or 11.
If this does not work for u , revert back with the details - ISP name , cable / DSL , internet ip add off of the status page on the router....

Apple id not accepted by app store but its working fine on apple website.

i have my apple which was working fine on my mac book pro. but now its not accepted by the app store its keeps on loading for hour but no result where as the same apple id is working fine on apple website.

Click here and ask the iTunes Store staff for assistance.
(111387)

LXDM does not come after root logout (but it works fine after normal

I recently installed Arch with LXDE (and LXDM as login manager).
Everything works fine, except one strange feature I hope to solve thanks to this post.
I think I have to configure something on LXDM or X11.
I'll try to explain my problem.
When I boot computer, LXDM come.
If I login as one of my normal users, no problem: I can login and logout as many times I want, and LXDM come every time I logout.
But if I login as root, then after logout LXDM no longer come (after root logout the standard console (no X11) come).
Any suggestions?
I very rarely login as root, but in such cases I do want LXDM after logout.

Of course logging as root is a very rarely thing for me.
With su and sudo I can perform everything.
The point is to compare the desktop environmnet of "root" and "giulio".
User giulio is customized: theme, icons, panel and so on.
Instead, root has the standard LXDE environment (standard icon, standard theme, etc).
Sometimes I want to see if I installed theme for giulio only or for all. To accomplish this task I login as root and launch LXAppereance program: if I see the new icon theme (for example) then I installed that for all, otherwise, i installed that only for giulio.
This is why I found such problem I'm talking about.
Of course this is nothing important.
I can live all my life without logging as root.
But, I prefer to have all the things ordered in my system.
Now that I see LXDM is not properly configured (after root logout) I prefer to fix it (this does not mean I actually continue to log in as root).
It's just to fix things.

Safari tells me I am not connected to the internet, but Chrome works fine...

Hi -
Today I logged in and went to load pages in both Chrome and Safari.
Chrome loaded fine, but Safari tells me I'm not connected to the internet.
The network preferences say I'm connected via Ethernet.

Check the Firewall ..
Open System Preferences > Security & Privacy > Firewall
If it's turned on, click the padlock icon then click Firewall Optios
If Safari is in the list, lick the double arrow on the right then select: Allow incoming connections then click OK.

I have an ipod touch which i am trying to authorize to napster by rhapsody but it cannot find a device! any help. it does not show in my computer but it works fine in itunes.

any help on this would be appreciated.
we think that is is because the system (xp) is not seeing the ipod in the my computer therefore the napster software has nothing to lach on to.!

Does it say that it works with iOS devices (iPhone, iPod touch or iPhone)? iOS devices have a different format/file system than other iPods.

How to execute Coded UI automated test case remotely without installing Visual studio?

We are using visual studio 2013 premium. my object is to run the Coded ui automated test case remotely without installing visual studio. can you guide me how to approach it successfully ?
Thanks in Advance..

Hi Divakar,
According to your description,
as far as I know that if we want to run the automation test remotely without vs using mstest, we will need to install and configure the test controller and the test agent machine.
Please refer to the following steps configure the test controller on locally machine and install a test agent on the remotely machine.
Note: If you an
automation test on locally machine, we must make sure the test agent be installed on remotely
machine.
Step1: you can try to
configure test controller and agent, for more information:
http://msdn.microsoft.com/en-us/library/hh546459.aspx
Step2: you will need to
assign roles to a Test Controller and Test Agent for Automated Testing in Visual Studio, please see:
http://msdn.microsoft.com/en-us/library/ff469838.aspx
Note: you will need to add a testsetting file before you assign roles to a Test Controller and Test Agent for Automated
Testing in Visual Studio.
Reference:
http://msdn.microsoft.com/en-us/library/ee256991.aspx
Step3: After you configure and install the test controller and test agent successfully, we can
executed coded UI test remotely using mstest.exe on test agent machine, we would call the testsetting file in command line.
Reference:
How
to use MSTest.exe command-line options
In addition, I find an article about
Running tests in mstest without installing the VS IDE, please see:
http://blogs.msdn.com/b/anutthara/archive/2009/12/16/running-tests-in-mstest-without-installing-the-vs-ide.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

TFS Build - Unit Test is showing wrong result

HI Team,
       I have a build definition(“BDPR's Playground CI Build”) which is compiling 2 solutions and running the unit tests in them. Globally I have
6 unit tests that pass, 0 that fail and 2 that are inconclusive, which gives a total of 8 unit tests. When I run this build definition, what is reported in the build summary is “6/6 test(s) passed, 0 failed, 0 inconclusive”, which is obviously wrong. It looks
like inconclusive unit tests are completely ignored by the build system. Is this a bug or am I missing some subtle option somewhere in the build definition to get this right?
       Displaying a given build summary in Visual Studio gives less information that in the web portal. The web portal reports the number of inconclusive
unit tests (but with a wrong value – see previous item) whereas Visual Studio doesn’t report the inconclusive unit tests at all. Example: for the build “BDPR's Playground CI Build_20150409.5”, web portal reports “6/6 test(s) passed, 0 failed, 0 inconclusive”
while Visual Studio reports “6 of 6 test(s) passed”! Is this a bug or is there some misconfiguration somewhere?
Regards
Hem

Hi Hem,
Thanks for your post.
What’s the version of your TFS and VS?
Yes, as far as I know the inconclusive unit test result not show in TFS build summary by default. Bu you can view the TFS build
Diagnostic log to view which inconclusive unit tests be executed in build.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Query not running in report builder 3.0

hi, i can run my query in mgmt studio (version 2008R2) and within the query designer of report builder 3.0 but it will not run from report builder. i get a generic error message of "an error has occurred during report processing. (rsProcessingAborted)".
the query uses report parameters and is written with dynamic sql (using a pass-through to oracle). any ideas why the query doesn't execute in report builder ? thanks a bunch,

Hi KanataPablo,
According to your description, it seems that you are using linked server to pass value to oracle. Seeing that the query is worked well in Management Studio, you may have the permission to connect to oracle (In this scenario, make sure the users to run the
query in SSMS and Report Builder are the same user). So this issue can be caused by the user’s permission to connect to report server, the credential of data source and the dynamic query.
We can add the current user as a Login, then click Properties and navigate to User Mappings page, enable ReportServer and ReportServerTempDB options.
We can try to type user name and password, and enable “Use as Windows credentials” as the credential used to connect to data source.
Try with dynamic query:
="Select column1, column2 From tableName where ID IN (" + JOIN(Parameters!param1.value, ",") + ")"
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

HT4515 How to make sure that after browsing that the webpage is not running in the background, but totally closed down

How to make sure that after browsing that the webpage is not running in the background, but totally closed down

Double tap the Home button, tap & hold the Safari icon until it starts to wiggle, tap the red minus sign to remove it from the Multi-Tasking bar. Tap the Home button when finished.

My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router

My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router.. Any idea how to fix this?

Hello Rattisate,
Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro. I would be concerned about this too. You can find information on how to troubleshoot this in the following article:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

After configuring SSL, cannot run Report Manager but ReportServer works fine

I'm using SSRS 2014 as part of SQL Server 2014 Express. I've configured both the Web Service URL and the Report Manager URL to use a Certificate and only allow port 443 traffic. I did this by removing the port 80 identity and adding an SSL Identity.
All is working well for https://myserver.com/ReportServer. But when I try and access report manager, I get the following error when running remote:
The underlying connection was closed: Could not
establish trust relationship for the SSL/TLS secure channel.
When running directly on the server, the server, it just rejects my passwords and asks for it again.
If I remove the SSL Indentity and add back in port 80, it works fine over https.
Any ideas of what might be causing this problem?
Thanks,
Glenn
Please mark this post as Answered if it solved your problem, otherwise you can click Vote if it helped you out. -Glenn Thimmes

Hi Glenn,
Per my understanding that you have added an SSL Identity and you got some errors "The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel." when you logging remotely to the report manager,
but which work fine when login report server, and it also asked for credential when you login report manager locally, right?
The issue can be caused by many factors. Please check below points one by one to help you clarify:
In rsreportserver.config file(Path like this:C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer), ensure that SecureConnectionLevel is set to the value 2 or 3. If disable the SSL value is set to 0. Corrected
line in your rsreportserver.confiog file should look like:
<Add Key="SecureConnectionLevel" Value="3"/>
In rsreportserver.config, add the correct value to the <URLRoot> element. the ReportServerUrl value must be the name of the server that is registered for that certificate. with a hostname that is valid for your certificate. For example, if the
certificate is registered to https://adventure-works.com.onlinesales, the report server URL would be
https://adventure-works.com.onlinesales/reportserver.
<UrlRoot>
https://adventure-works.com.onlinesales/reportserver.
</UrlRoot>
Ensure that your certificate exists in Trusted Root Certification Authorities in certmgr for the local machine.
http://www.c-sharpcorner.com/uploadfile/anavijai/could-not-establish-trust-relationship-for-the-ssltls-secure-channel/
This is very important. In rsreportserver.config file, add the same value to the <ReportServerUrl> element the same as that you added in step 2.
<ReportServerUrl>
https://adventure-works.com.onlinesales/reportserver.
</ReportServerUrl>
Then restart your report server (stop & then start in Report Server Configuration Manager).
Article related to this issue also contain the troubleshooting for your reference:
http://msdn.microsoft.com/en-us/library/ms345223(v=sql.100).aspx
Similar threads for your reference:
Could not establish trust relationship for the SSL/TLS secure
channel
SSRS 2008- Underlying connection
was closed – could not establish trust relationship for SSL/TLS
If your problem still exists, please try to provide us snapshopt about the setting for the SSL Identity and also the Report Manager URL,etc.
Regards
Vicky Liu

I recently buyed totally unlocked sprint iphone which was legally contract free and i am using that phone in india but i am not able to send sms .everything is working fine except sending sms. i have tried everything plz help me !!

i recently buyed totally unlocked sprint iphone which was legally contract free and i am using that phone in india but i am not able to send sms .everything is working fine except sending sms. i have tried everything plz help me !! i have tried everything i.e. reset iphone /hard reset/network setting reset /sms service no i have also changed but i am still not able to send sms.. please help me as i am really worried .. thank you !!

I had the same problem. Kept getting message of waiting for activation or check network connections. I also tried every solution out there and nothing worked. This did though: I download the newest version of itunes (through Internet Explorer - Google Chrome wouldn't work). It pulled in my entire library thank goodness and then I plugged my iphone 4s into the computer. I let itunes find it, did a complete backup in icloud, then did a restore. Entire process took a couple of hours, but I now have imessage and facetime back. I was about ready to give up on Apple and go get a different phone ~

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
- reset
- fully charged,
- cable works fine on two other computers
- in normal or disk mode makes no difference
- tried to find anything useful in the diagnostics mode
- reinstalled iTunes several different times since then to the latest version
- I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
- I've never used any Mac with this ipod
- I've tried fiddling with the win7 Services by stopping and restarting them and of course
- uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
- Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
Here are two screengrabs from my Device Manager
and Devices and Printers screens on my comp:
That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
If you think you have any idea PLEASR HELP, I'M DESPERATE!

HOW DO I INSTALL DISK OF MY NEW 10.6 SNOW LEOPARD ? NEW MAC DO NOT HAVE DVD ACCESS . BUT I WORK ON OLD MAC 10.4.11 TIGER THAT DO HAVE DVD ACCESS . HOW DO I CONNECT NEW AND OLD TO MAKE IT WORK ? THANKS

HOW DO I INSTALL DISK OF NEW 10.6 SNOW LEOPARD ? NEW MAC DO NOT HAVE DVD ACCESS . BUT I WORK ON OLD MAC 10.4. TIGER THAT DO HAVE DVD PLAYER . I KNOW THAT SHOULD BE EAZY . THANKS

You'll need to provide some more information .... what current mac mini do you have? Click on the apple in the left corner of the menu bar, click about this mac, and what does it say for processor, memory, and os x version?
When you say you have no DVD, do you have the mac mini server or is the DVD broken?
You can't do anything with 10.6 Snow Leopard on a PowerPC mini, however, if it is an Intel-based mini, you could probably hook up the systems in target disk mode to install 10.6.

MSTest not running in TFS build but tests works fine locally in visual studio

Similar Messages

Maybe you are looking for