MSVCR71.dll error message

I am trying to run a Backup.1.exe file to restore documents after my hard drive failed. I have copied the backup files from my external hard drive to a different HP computer. Whenever I try to run the application Backup.1.exe, I get an error message that says "This application has failed to start because MSVCR71.dll was not found. Re-installing the application may fix this problem."
Any ideas on how I can fix this and get my files off the hard drive?
Thanks,
Brad

Hello Brad 131415:
Welcome to HP's forum . I am not one for downloading these fix it tools. I have Iyogi Technical Support if I ever need them. Not every one can afford them. Here is the search results on bing for fixing
your error http://www.bing.com/search?q=error+MSVCR71.dll&src=IE-SearchBox&FORM=IE10SR&pc=HPDTDF . You are welcome frrw. It did not list any thing from Microsoft. My McAfee's Browser Guard reports every thing listed is safe except Msvcr71 Dll Easy fix RegEasyPro.com on right hand side is a bad website. Everything else on page is green. You are welcome frrw

Similar Messages

Missing MSVCR71.dll Error Message During Launch

I just wanted to pass along an error message that I have found the solution to and have passed onto Adobe through the bug submission process.
I have discovered a QuickTime Component that causes Adobe Encore CS5 to give an error message during launch. The Error message states “The file MSVCR71.dll could not be found. Please reinstall Adobe Encore to resolve the problem” (Well, it is something really close to that. I did not write down the error message before fixing the problem). There is an “OK” button below the message to continue loading Adobe Encore.
The error message is only displayed if all other CS5 programs are closed. During my findings, I discovered that if you open Adobe Encore CS5 through Premiere Pro CS5 or After Effects CS5 by using Dynamic Link, the error message will not be displayed.
The QuickTime Component that causes the error message is “XiphQT”, which is used to play Xiph formats in any QuickTime based application. The Component can be located here: http://www.xiph.org/quicktime/
When installing the latest version of the program “Juicer” from digital juice, the QuickTime Component is installed. Juicer will run without the Component, but gives a message that it is missing. I have removed the Component since I use Encore to a much greater extent.
To remove the XiphQT Component from QuickTime, you must remove it manually because when QuickTime is uninstalled, the Component is left behind and will be a part of future installations of QuickTime.
While the error message displayed during the launch of Adobe Encore CS5 is not detrimental, it can be frustrating, so I hope this may help others that receive the error message from above. I should also note that I am using Windows 7 Home Premium.

Greetings,
My solution was attributable to my firewall (Microsoft Defender) blocking TCP connections to QuckTime. Here's the steps that resolved my problems on CS5, Windows 7, 64 bit:
Control Panel
Windows Firewall
Advanced Settings
Outbound Rules
New Rule...
Program/Next
This program path: (use Windows Explorer to search)
c:\Program Files (x86)\Adobe\Adobe Bridge CS5\msvcr71.dll
Allow the connection
(Leave checks Domain, Private, Public)/Next
Name Description: (whatever you like - will display at top of Windows Firewall Advanced Security Outbound Rules)
Good luck, Michael

Here are the instructions on how to fix the newest update problem with the .dll error message:, Here are the instructions on how to fix the newest update problem with the .dll error message:

Go to My Computer, Uninstall Programs, and uninstall in this exact order :
      Itunes
      Apples Software Update
     Apple Mobile Device Support
     Bonjour (my system required a reboot on this one)
     Apple Application Support
Reboot your computer, go to the official Itunes website (make sure it's the Apple Itunes Website and not some other one!), and reinstall Itunes.
I got the same .dll error message after the reinstall, but my Itunes was downloaded successfully and I was able to Sync my phone. : )
Good luck to you and God Bless!
(Sad that we have to come to the Discussion Forum to figure this all out instead of Apple taking care of their business and helping us out, huh?)

Someone else said they did a system restore to a previous update, and then a java update and that worked for them, saying they were going to stick with the earlier version of itunes until they get the bugs out of the new one. I t tried restores and that didn't work for me either, but maybe it will work for you. Good luck and I hope you get it working soon..

TS5376 I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions above and now I can't get past the Service 'Apple Mobile Divice failed to start. Help!!!

I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions to move the .dll's to the desktop, I removed iTunes via the control panel, and now I can't get past the Service 'Apple Mobile Divice failed to start. Verify that you have sufficent privilidges to start systems services. I now have no iTunes on my laptop, can't reinstall iTunes, and I am pulling my hair out because I can not figure out how to send an e-mail to Apple because I bought my iPad just over a year ago. PLEASE HELP!!!
V/r "TRACER"
CDR Harold W. "TRACER" Valentine, SC, USN

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

TS1369 since downloading updates for itunes I get MSVCR80.dll error message every time I try to access itunes?

Since downloading updates for itunes I get MSVCR80.dll error message every time I try to start i-tunes. can anybody help please.

Hello aristilus2,
Thank you for the details of the issue you are experiencing with iTunes. I suggest removing and reinstalling iTunes for the issue you described. The following article has steps to do this, and I recommend removing iTunes and all related componenets as outlined in the article:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT2292 Can't re-instalI Tunes. Receive a MSVCR80.dll error message. How do I correct?

Cannot reinstall latest version of ITunes. Receive a MSVCR80.dll error message. How do I correct this?

Click here and follow the instructions.
(98798)

ATMLIB.dll error message

Is there a fix for ATMLIB.dll error messages (not designed to run on Windows)?

I was able to fix this, and I posted about it on another forum post here
I had this issue ("Bad Image: C:\Windows\system32\ATMLIB.dll is either not designed to run on Windows or it contains an error") with Adobe Reader X (10.1.12). I tried repairing, and then tried uninstalling and upgrading to Adobe Reader XI (11.0.9), but still had the same trouble. I compared the atmlib.dll files in both directories and noticed that the file in C:\Windows\SysWOW64 did not appear to have any file meta data (giving the appearance that it was corrupted), whereas the file in C:\Windows\system32 reflected a file version 5.1.2.238 and product version "5.1 Build 238". Now, it appears based on being installed to "C:\Program Files (x86)" that the version of Adobe Reader I was using was 32-bit. So, this tells me that while the error references the C:\Windows\system32 file path, it is likely actually the file in C:\Windows\SysWOW64 that is the problem (Windows-on-Windows emulation for 32-bit applications, 32-bit libraries actually reside in C:\Windows\SysWOW64, not C:\Windows\system32). I found the same file in C:\Windows\SysWOW64 with the same product and file version on another 64-bit Windows 7 workstation, and simply copied it to C:\Windows\SysWOW64 on the affected workstation, and that resolved the issue.
NOTE: To overwrite the file, I had to change file ownership to Administrators security group, otherwise it was immutable.

"unable to load wingenerator.dll" error message in Captivate 4

Has anyone run into the "unable to load wingenerator.dll" error message in Captivate 4. I didn't see this type of error in v3...so just wondering if it is an issue with this version. I have to save my project after every change in order to not loose my work. I get this error and then the program crashes without saving my work.

Hello Cat,
Welcome to our community. This sounds like the Windows registry has either become corrupt or has an incorrect permission. If you are using Windows XP then you might want to take a look at the following blog post
Adobe Captivate 4 Installation Issues on Microsoft XP
If you are using Windows Vista then I would suggest that you contact Adobe using the Adobe Captivate Feature Request/Bug Report Form
Adobe Captivate Feature Request/Bug Report Form
Regards - Mark

C:\Windows\ehome\ehuihlp.dll Run DLL error message

When I start my laptop (HP Pavilion dv6-3120us Entertainment Notebook; 64-bit operating system; AMD Turion II P540 dual-core processor, 2.40 GHz) , the following Run DLL error message appears: "There was a problem starting C:\Windows\ehome\ehuihlp.dll.
The specified module could not be found." I wonder if this is related to my uninstalling (or attempting to uninstall) Windows Media Center, because it would take such a long time to open, and I didn't know how to disable it from automatically starting.
Do I need to reinstall the file? I don't think I have any original software separate from what came with the laptop. I do have a Recovery Disc Set from Feb. 2011. Is there another way I can download the file and/or fix this?
Thanks.
SL

Thanks very much for the reply. I did uninstall the software by using the Add/Remove Programs from the Control Panel. I went in and unchecked the box for Windows Media Center and when I rebooted, the message didn't come up again.
I also started getting another similar DLL error message, but it was under our Users folder: AppData\Roaming\newnext.me\nengine.dll. I unchecked it ("Next Live") the same way as for the Windows Media Center and when I rebooted, it didn't come up. I didn't
uninstall or do anything else, so do I need to do so? (I don't know what "Next Live" is.)
Thank you,
SL
SL-7

Qt5Gui.dll error message

Since 10 Jul 15 whenever my laptop boots up and all icons or shown on desktop, the error message -"The program can't start because Qt5Gui.dll is missing from your computer. Try reinstalling program to fix the problem".How do I reinstall this program? Thank you.

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion dv6-6c10us Notebook and issues with Qt5Gui.dll error message on startup. I have search this and is seems to be a phone issue. Have you added some software for a cell phone? If this is what is causing this issue you could uninstall the software. Here is a link to show you how to do this. If that did not help, you can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook. I would recommend a restore point before the 10 th, maybe something around the 5 th or so. When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.Here is a link to check the device manager for errors with drivers. If there is a driver with an issues in your Device Manager, this could be causing an issue. Here is a link to show you how to resolve this, if you need it.
Please let me know how this goes. Thanks.

Kakjfa.dll error message

Has anyone successfully dealt with the following .dll error message? Any advice would be appreciated.
Desktop\AppData\Local\Adobe\PackageAware\kakjfa.dll

That's useless without proper system information and details on when the message exactly occurs.
Mylenium

HT1222 How do I download itunes with a MSVCR80.dll error message?

How do I download itunes with a MSVCR80.dll error message?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
iTunes 11.1.4 for Windows- Tips for Unable to install or open - MSVCR80

MSVCR71.dll Error?

Am using CS 5.5 Production suite on Win 7 box and, all of a sudden, I get an error saying that I am missing the MSVCR71.dll file. This only happens when I open Encore. If I hit the OK button 7 or 8 times, Encore opens up just fine. This also happens sometimes when I try to open Premiere. Everything else seems to open up just fine. This just started happening and is very strange. Anyone else had to deal with this? If so, any solutions? Thanks!

I have read somewhere (don't remember where ???) that some quick time componenet called XiphQT might cause this error.
This componenet might come to your system because of some other application installation. Delete this component and then Encore would launch without any such message.
Hope this solves your problem.
Thanks,
Ramesh.

Question about dll. error message when loading - PSE 6

I have PSE 6 and suddenly get the following error message when I open PSE: Organizer-Photoshop Element PhotoshopElementsOrganizer exe- entry point fot found. CFBundle Copy File TypeForFileData could not be located in dynamic linc library core foundation.dll.
No idea what that means, what happened and how to fix this.
Is there anybody that can give advise to a non-computer literate person????
Help would be greatly appreciated.

See post #6 in this thread for a likely solution:
http://www.elementsvillage.com/forums/showthread.php?t=50471

Unable to transfer windows 7 files due to DLL error message

I recently went from PC to Macbook Pro and have been unable to transfer files from my windows 7 due to an error message "missing DLL File" Does anyone have a sloution to this problem or a sucessfull alternitive transfer method?

You can't transfer the Windows OS nor installed programs. You can transfer your data using an external drive, DVDs, usb flash drive or network.

MSVCR71.dll error message

Similar Messages

Maybe you are looking for