MSXML6 component won't install

I am trying to install a software program that uses SQL2005, SQL 2008, or SQL Express.  When I try to install the software, and it tries to install SQL, it successfully installs the following components "SQL Server Native Client", "SQL
Server Setup Support Files", "and SQL VSS Writer".  When it gets to the "MSXML6" component, it fails and I get a message that says "SQL cannot install on this computer".  So, I uninstalled all of the successfully
installed components and did so, so that I could try again.  I noticed that "MSXML6 Serv Pk 2" installed.  I tried to both remove it and change it and I got a fatal error message.  I also tried installing SQL independently, without
using the software that I was trying to install that uses SQL, and got similar messages. 
Thanks.
Brian

Hello,
Please try the following fix:
http://support.microsoft.com/kb/968749/en-us
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

  • Flash CS component won't install ...

    I'm a linux user and I'm trying to test flash out. I have a
    qemu vm installed on my system with a perfectly fine version of
    winXP SP2. I can install any and all other software that i need no
    problem, but when i try to install flash, it messes up.
    Basically what happens is that the installer installs flash
    Device, Bridge and Video Encoder component but fails to install
    CS3. This sucks, as it gives absolutely no error whatsoever so I
    don't have any idea of what the problem might be.
    I've searched on the net and I found out that Flash logs to
    an Installer folder on C:. As it turns out though, i can't find any
    error message in the logs either. Needless to say, I've wasted a
    ridiculous amount of time already downloading, installing,
    uninstalling and reinstalling flash - which tends to give me a
    fairly poor impression of adobe and their software writing
    capabilites.
    The XP is fresh, it has no other adobe products on it. I've
    checked the minimum requirements and as far as i can tell I've
    equalled or exceeded them all. I have no adobe files in the
    registry.
    Does anyone have any ideas ?

    You don't explain what you are trying to achieve, or how.  So all I can do is point you to the archived Flash Players page http://kb2.adobe.com/cps/142/tn_14266.html

  • Itunes 8 - won't run - a required i Tunes component is not installed

    I upgraded to iTunes 8 last night and following the install when trying to open open i receive the following error.
    *"The itunes application could not be opened. a required iTunes component is not installed. Please repair or reenstall Quicktime (-42404)"*
    I have re-installed both applications, uninstalled and re-installed, attempted to repair quick time still not working.
    quicktime works ok, click on the icon and it oipens up and plays fine.
    Please help. I just purchase my iphone yesterday also, an i am unable to activate it as i can't get i tunes to work.
    thanks in advance

    To begin with, i tunes just quit working one day. it wouldn't open anything read any cds and ever time i tired to open it, it just popped up and error that it needed to be debugged or such. I had someone come look at it and they kinda sorta fixed it. i can now open it and listen to music. but i have to convert everything myself and add all my album work and it still wont rip cds or connect to my ipods. it says i need to have a 7.6 version or later. i went to download the new 8.0 verison and when it got to the end of installtion a box popped up that acess was denied and that it encoutered a error i always went and tired to reinstall quicktime and i tunes and deleting everything from it, and then when i tired to reinstall everything it still wouldn't install, its begginning to become very annoying and no one else knnows what to do.and i really need someones help... pLZ!!!!!!!!!!

  • Desktop Manager states Updated Software Component Must Be Installed - but won't install it

    I am running Desktop Manger 6.1.0.35 (Bundle 34) for a while. I am moving to a new smartphone of the same model but phone I am moving to has an older OS on it. I run the desktop manager which correctly determines that there is a new OS to load. I select the OS version to load and tell it to get the update and it responds with the error 'An Updated Blackberry Software component must be installed before you can continue'. It then asks if you wish to Install or Cancel. After selecting Install, it returns to the main screen of the desktop manager. Selecting UPDATE again, to insteall the latest OS, it repeats the same process again. So I am unable to load the latest OS into the device.
    I've tried loading the software via the Blackberry web site instead, and it does the same thing. I can't get the OS updated.
    Has anyone had this problem and determined how to get around it?

    Hey,
    i am having the same issue for about 3 weeks now. I was able to install the latest version, 7.1, but i can't install a new OS. The software finds that there is a new OS that can be installed, but as soon i want to install it, the software demands an update, although it already is the newest version...
    Might there be a general problem with the 7.1 version???

  • ITunes won't run because a required component is not installed

    I think a Quicktime upgrade went wrong and now I can no longer open my iTunes and this message appears:
    "The itunes application could not be opened. a required iTunes component is not installed. Please repair or reenstall Quicktime (-42404)"
    I have tried uninstalling and reinstalling Quicktime but it still does not work, and I don't want to risk losing my 50GB of music..
    Thanks in advance

    Download iTunes 11 from the Apple site and reinstall. The error message was quite plain in telling you what to do to resolve the error.

  • Windows updates won't install

    Hello,
    I have a remote user whose Windows updates won't install. He has a Dell laptop with Windows 7 Pro 32-bit. You can bring up the update windows and start the install but, at exactly 10 seconds, it just says "Updates failed" and doesn't really give
    any more information.
    I saw the Windows update service was stopped, I started it and that didn't seem to help. I also tried the update troubleshooter and that didn't do anything. I checked for malware and didn't find any, and he has plenty of disk space. I didn't see
    anything in Even Viewer or Reliability Monitor either.
    What could it be?
    Thanks. 
    Chris Hansen

    Hi Chris,
    Firstly, please check if those Windows Update have already installed:
    1. Open Windows Update by clicking the Start button. In the search box, type
    Update, and then, in the list of results, click Windows Update.
    2.In the left pane, click View update history.
    3. Click Installed Updates at the top of the page, there check if any Windows Update installed recently.
    If there is no any Windows Update installed, try to
    reset the Windows Update component to check if it could resolve the issue.
    Karen Hu
    TechNet Community Support

  • Itunes won't install

    I am having major problems trying to get itunes to work. I am using a Dell laptop with windows vista and an ipod touch. I had no problems for a couple years. Then, I had to replace my hard drive and reinstall everything. At first, I did have itunes running. But it would not do anything with my ipod anymore. On rare occasions, it would show the icon, and I would click it, then it would disappear. So, I can't make a playlist or add any photos. The ipod touch works fine, but my computer wasn't letting me do anything with it.
    A few months ago, I decided that maybe the problem was that it was a newer version of itunes than before, and I just couldn't figure it out. So, I uninstalled it and tried to install an older version. Since then, I have not been able to get any version of itunes to open. I have uninstalled and reinstalled 15-20 times now. I have also installed quick time, bonjour, apple mobile device support. I tried to uninstall apple software update, but that one would not delete, even going through regedit.
    I don't know if it is related, but I am also having to reset firefox every few days now as it gets really slow and videos won't play. Then, once reset, I have to reinstall flash. I also lost my CD burner for awhile because of deleting itunes.
    I am so frustrated. I really don't need to use the program itunes very often, but I really need to make some new playlists and move one item off a list that I don't want to delete, but should never played in a playlist (it's a movie, the whole thing). I like to play music in my car while driving, and I can't be adjusting it while I am driving. I also need to upload photos. I am a pet photographer, and it is in downright embarrassing that I can't show current photos of my own cat. The only way I can get a new photo on it is to email it to myself and save it the camera folder. This is crazy.
    On one occasion, I got this error (but not anymore):
    The registry used by the itunes drivers for importing and burning CDs and DVDs is missing. This can happen as a result of installing other CD burning software. Please reinstall itunes.
    The error I usually get is:
    A required itunes component is not installed. Please repair or reinstall itunes. 42404.
    I have followed various sets of instructions here several times. I have tried repair as well.
    Any ideas? Any way to edit playlists on my ipod touch without itunes? Any way to upload photos without itunes? Do I really need to buy a cheapo used desktop just so that I can edit my ipod???

    well done John!
    The different download worked for me as well. I have seen this issue for a week. I wonder why Apple has not replaced the link on the iTunes site?
    hmmm. apologies for being nosy, but do you mind if i ask a few follow-up questions?
    what browser, security software and ISP were you using?
    here's why i'm curious. that message
    b can
    be caused by a server problem, but the one time i've seen that happen, we got
    b way
    more reports of the message than we're currently getting.
    there's also a "background level" of these things which get reported ... but you're absolutely right that there's been
    b way
    more of these reported over the past week than we were getting as the background level ...
    so it's plausible that there's something new afoot. i know that the QT+iT download site behaves a little differently from some of the other download sites. (for example, some people running McAfee Privacy Service who get the "blank blue box" on the itunes download page
    b can
    actually see the download controls on the QT+iT page ...) so i'm still open to the possibility that it's something about the PC/software/ISP configuration in individual cases.
    dunno what that could be, though.
    love, b

  • RSAT won't install on Windows 8.1 Pro - "The system cannot find the file specified."

    Please help. RSAT won't install on Windows 8.1 Pro. Every time I try, I get the same error - "The system cannot find the file specified.". I really don't want to have to refresh the PC to get it working! I've installed the update successfully on
    a fresh win 8.1 enterprise install on a Hyper-V VM.
    I am in uk, so have installed the en-US language pack first. I did have a windows component store corruption but I've managed to fix that.
    event log says:
    Windows update "Update for Windows (KB2693643)" could not be installed because of error 2147942402 "The system cannot find the file specified." (Command line: ""C:\Windows\system32\wusa.exe"
    "C:\RSAT Windows8.1-KB2693643-x64.msu" ")
    CBS log (C:\Windows\Logs\CBS\CBS.log): http://1drv.ms/19CAv14

    As Roger Lu reported, the log indicates that there is corruption in the update files that you downloaded. The log actually reports “file not found”, so you may also want to check permissions on the extracted files in C:\Windows\SoftwareDistribution\Download\76ecaa86ec6712300c2d71cbcdad378c\.
    You can also re-try downloading the files to see if your original download was just corrupt.
    Bruce Wooding Windows Outreach Team- IT Pro Windows for IT Pros on TechNet
    It was a permissions issue! Thanks so much Bruce!
    I checked the permissions for the folder mentioned above and TrustedInstaller only had List Folder Contents and Special Permissions. So I granted granted Read & Execute to TrustedInstaller and tried installing again...
    1) double clicked the installer.
    2) once it said Initialisation was complete, I checked the permissions again and it had re-set them to as before, so I granted Read & Execute to TrustedInstaller again
    3) Installation was successful.
    Not really sure why this happened as it doesn't make sense but it's working now :-)

  • Adobe PDF Writer (v5.0) won't install; can't find LPT1 port

    I've searched extensively for an answer on this question, and the most common answer is no answer or use a newer PDF creator.
    The department I support uses database software that was never programmed to support any PDF creator past PDF Writer, so all users of this software have Acrobat Professional 5.0.5 installed using the "Custom" option to include the PDF Writer.
    All workstations run XP, sp3.  I have never seen this problem on any other machine.  I have installed version 5 on other machines with newer installations of Acrobat (7,8, and 9) with no functionality issues.  The machine that won't install the PDF Writer had V8 installed.  I have removed Acrobat V8 to try to get the V5 installation to run.  I have tried running the V5 installation first without PDF Writer, and then adding in the PDF Writer.
    In all cases, as soon as you click "Install" after checking "PDF Writer", the error "Acrobat PDF Writer requires a LPT1: printer port.  Setup could not find this required port.  The PDF Writer component will not be installed.  To install PDF Writer, add a LPT1: port and run setup again" always appears, and the installation tries to continue without the PDF Writer.
    This computer has a fully-functioning LPT1 port (as well as LPT2 and LPT3) which is not in use by any other printers (according to the printer properties display).  XP shows the port under Device Manager as functioning properly, although I have both disabled/re-enabled the port, as well as uninstalling it and rebooting, at which point it re-installs properly.
    All high-priority Windows XP updates are current and again, on similar machines, similarly imaged, I have never had this problem using the same media.  I have tried installing a printer on this port and adding drivers.  All machine users have Administrator privileges (unfortunately)
    Due to the large quantity of data and software on this user's machine (and the fact that otherwise it runs great), I would REALLY rather not re-image the machine.
    Any help or ideas will be GREATLY appreciated.

    Hey, good idea, and I hadn't done it, but nothing is remaining from any previous Acrobat installs (according to the Cleanup Utility).  I do pretty good registry cleanup on these machines as I work on them for other reasons/updates.
    Other ideas?

  • 9i won't install oo4o components

    I'm trying to install 9i on a Win98 machine and it won't install the oo4o dll's. There's no oo4e folder in the oracle directory tree. I've installed three times now.
    I need them for a VB database application. I keep getting Runtime Error 429 ActiveX component can't create object.
    Can anyone explain what might be wrong?
    Thaknks

    I have 9i on multiple Win98 machines here. But on this one, it just won't install some of the client files. ODBC, oo4e, and ole are missing.
    Is there something in the pc's configuration that could prevent these files from being loaded?

  • Premiere CS3 Won't Install

    I'm finishing the build from Hades. I followed the Matrox system recommendations, apparently they had an easier time than I did. I finally resolved my issues with my video card, now Premiere and Encore won't install!
    System Info: Tyan Tempest 5400 (socket 771) motherboard, two Xeon Quad core E5450 CPUs, one ATI Radeon Sapphire HD 3870 1 gig on-board ram, two 2 gig FB DIMM 667 RAM sticks. Software version Premiere Pro CS3.
    I'm fairly certain I've met the minimum system requirements - I followed one of Matrox's highest system builds (at the time). The version of XP I bought already had Service Pack 2. As far as I can tell, I've loaded all my drivers. I have two separate 1 TB drives (7200 RPM). My DirectX version is 9.
    The install process for both Premeire and Encore appear to proceed normally. The summary screen simply notes:
    "Successfully installed 2 component(s):
    Adobe Preiere Pro CS3 Third Party Content
    Shared components
    Errors: 2 component(s):
    Adobe Premiere Pro CS3
    Component install failed
    Shared components
    Component install failed"
    I bought my RTX2 last summer, but building my house, technical diffulties with my system and my mother's death delayed getting this unit assembled.
    I tried uninstalling using add/remove programs, with the same results.  I also tried using two different DVD drives.
    I started a post on the Matrox forum site.  It looks like I have them stumped...
    Any assistance will be greatly appreciated.

    OK, you've got a "clean system," and I assume that you have not had a "trial" version of CS3 installed on it, right?
    I'm going to throw out some ideas on Adobe program installation. These are distilled from various Adobe fora. Some might NOT apply to PrPro, but many might.
    1.) download and install the lastet Adobe Flash Player (some Adobe programs need it to install properly)
    2.) download and install the latest Apple QT Player (some PC users get by just fine without it, but a few Adobe programs want to see it.
    3.) download and install the latest video and audio drivers. Update any firmware.
    4.) turn OFF ALL anti-virus, spyware and pop-up blockers (including any in IE, if you have it, or any other browser). Also turn off
         Windows Messenger and Windows Indexing.
    5.) make sure that you are logged-in as an Administrator
    6.) as you got an installation error, I would Remove both Adobe programs (Add/Remove Programs) and also run Adobe's CleanScript. I think that
         this might be better than doing a Repair Install, though you can certainly try it first.
    7.) if it still fails, try an installation from a Safe Mode boot. I *think* that this will only work for PS and Illustrator, and NOT for PrPro.
    8.) if it still fails, and I hate to even suggest this - remove the Matrox card and all drivers, and try again. Given your efforts to get the box up and
         running WITH the Matrox, I'd use this as a total "last resort."
    Good luck, and I hope that something, prior to #8 works for you,
    Hunt

  • Random Errors fix one another pops up - One USB port won't install device's drivers

    I am trying to get this computer to work and every time I fix something another issue shows up. It is like a sinking boat in a carton. First it was slow and just acting up. After a few tweaks I got RestoreHealth to run and fix the issue. No SFC isn't reporting
    any errors. For the longest time chkdisk wouldn't run manually but every startup it would run says checking.. fixing... fixed. This would happen on every startup now that is solved and it reports back okay. There were some drivers not working got
    those working. Visual Studio had some sensor drivers that were reporting errors to it is uninstalled to rule out that. Currently one USB port won't install any drivers for the device plugged in, or use a driver already installed. Other ports work and all the
    devices plugged in work in other ports. I would assume the port is bad but there are some programs that used to work and now don't. I am thinking there is an issue installing programs but I am out of my depth currently.
    One think I am wondering is about a line in the CBS.log. I really wish I could find a resource to learn more about how to read the logs. I know how to read some but there are things I just don't get, yet. A link to an article(s) about CBS logs
    would be great. 
    Here is the line I am curious about, even if it isn't part of the current issue I would like to know for futurereference:
    SQM: Failed to start upload with file pattern: C:\WINDOWS\servicing\sqm\*_std.sqm, flags: 0x2 [HRESULT = 0x80004005 - E_FAIL]
    Here is a link to the CBS log
    https://onedrive.live.com/?cid=c8ed24747f2675b2&id=C8ED24747F2675B2%21159&ithint=file,.log&authkey=!ADE8ZjZbrNHhkwk
    Here is the error in Event Logs that I think is part of the USB issue
    Log Name:      System
    Source:        Microsoft-Windows-DistributedCOM
    Date:          7/16/2014 1:12:13 AM
    Event ID:      10016
    Task Category: None
    Level:         Error
    Keywords:      Classic
    Description:
    The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID 
    {7022A3B3-D004-4F52-AF11-E9E987FEE25F}
     and APPID 
    {ADA41B3C-C6FD-4A08-8CC1-D6EFDE67BE7D}
     to the user personsPC\personsname SID (S-1-5-21-2541327983-389364735-1342229692-1001) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component
    Services administrative tool.
    Event Xml:
    < Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
        <EventID Qualifiers="0">10016</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2014-07-16T05:12:13.613459900Z" />
        <EventRecordID>39143</EventRecordID>
        <Correlation />
        <Execution ProcessID="880" ThreadID="932" />
        <Channel>System</Channel>
        <Computer>PersonsPC</Computer>
        <Security UserID="S-1-5-21-2541327983-389364735-1342229692-1001" />
      </System>
      <EventData>
        <Data Name="param1">application-specific</Data>
        <Data Name="param2">Local</Data>
        <Data Name="param3">Launch</Data>
        <Data Name="param4">{7022A3B3-D004-4F52-AF11-E9E987FEE25F}</Data>
        <Data Name="param5">{ADA41B3C-C6FD-4A08-8CC1-D6EFDE67BE7D}</Data>
        <Data Name="param6">PersonsPC</Data>
        <Data Name="param7">PersonsName</Data>
        <Data Name="param8">S-1-5-21-2541327983-389364735-1342229692-1001</Data>
        <Data Name="param9">LocalHost (Using LRPC)</Data>
        <Data Name="param10">Unavailable</Data>
        <Data Name="param11">Unavailable</Data>
      </EventData>
    < /Event>
    Thanks in advance. Never asked a question here so hope this is enough info and in the right place

    Log Name:      System
    Source:        Microsoft-Windows-DistributedCOM
    Date:          7/16/2014 1:12:13 AM
    Event ID:      10016
    Task Category: None
    Level:         Error
    Keywords:      Classic
    Description:
    The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID 
    {7022A3B3-D004-4F52-AF11-E9E987FEE25F}
     and APPID 
    {ADA41B3C-C6FD-4A08-8CC1-D6EFDE67BE7D}
     to the user personsPC\personsname SID (S-1-5-21-2541327983-389364735-1342229692-1001) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component
    Services administrative tool.
    Event Xml:
    < Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
        <EventID Qualifiers="0">10016</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2014-07-16T05:12:13.613459900Z" />
        <EventRecordID>39143</EventRecordID>
        <Correlation />
        <Execution ProcessID="880" ThreadID="932" />
        <Channel>System</Channel>
        <Computer>PersonsPC</Computer>
        <Security UserID="S-1-5-21-2541327983-389364735-1342229692-1001" />
      </System>
      <EventData>
        <Data Name="param1">application-specific</Data>
        <Data Name="param2">Local</Data>
        <Data Name="param3">Launch</Data>
        <Data Name="param4">{7022A3B3-D004-4F52-AF11-E9E987FEE25F}</Data>
        <Data Name="param5">{ADA41B3C-C6FD-4A08-8CC1-D6EFDE67BE7D}</Data>
        <Data Name="param6">PersonsPC</Data>
        <Data Name="param7">PersonsName</Data>
        <Data Name="param8">S-1-5-21-2541327983-389364735-1342229692-1001</Data>
        <Data Name="param9">LocalHost (Using LRPC)</Data>
        <Data Name="param10">Unavailable</Data>
        <Data Name="param11">Unavailable</Data>
      </EventData>
    < /Event>
    By the way, here is the related information about this event:
    Event ID 10016 — COM Security Policy Configuration
    http://technet.microsoft.com/en-us/library/cc726313(v=ws.10).aspx
    For your question about which package create the recorder in CBS, you can try Robert's suggestions.
    Here is a blog for you to know more about CBS:
    Understanding Component-Based Servicing
    http://blogs.technet.com/b/askperf/archive/2008/04/23/understanding-component-based-servicing.aspx
    Kate Li
    TechNet Community Support

  • When trying to install update 10.5 it says the download has invalid signature and won't install. I run XP

    when trying to install update 10.5 it says the download has invalid signature and won't install. I run XP

    I'm having similar problems with 10.5. I managed to install it but when I try to run itunes it doesn't open correctly and when I view my account the screen is not presented in the correct format. When I try to search for music it finds nothing. So I ran the diagnostics option but this came back with an error ' secure link to itunes failed'. It also said that the internet connection was verified but when I went into the help option it said I wasn't connected to the internet but as you can see I was and am. I've now uninstalled and reinstalled 3 times, each time I uninstall I've followed the correct sequence as recommended:-
    1. Itunes
    2. Quicktime
    3. Apple software update
    4. Apple mobile device support
    5. Bonjour
    6. Apple application support
    I've noticed now that 'quicktime' didn't get reinstalled, not sure if that's the problem. Also when I rebooted after the last Uninstall I received a new error message ' Applesyncnotifier.exe - unable to locate component'. I've also noticed that my CPU is running at 50% according to task manager when I've got apple loaded, but it goes down to less than 20% when it's uninstalled and even goes down to 0%. Clearly, there are a number of people with similar issues and Apple need to sort it quickly.

  • MPEG 2 Won't install

    I can't get my MPEG2 plug-in to install.. I download the .dmg, and go through the whole set-up process. But when I get to install and click on it, a dropdown message comes up and says, "Cannot continue, there is no software to install." Yes, I do have QT Pro and all up to date and that jazz, and I'm not the new/average mac user. I know what I'm doing and talking about. Any suggestions are welcome.
    HELP?¿

    I downloaded the MPEG-2 Player component but it won't install, responding with "destination volume is locked, choose another destination". After changing to desktop, the .pkg file still unstuff, with Stuffit error 17530. Help?

  • Itunes won't install update to recognize my iphone comes up with a error cannot find Itunes.msi

    my itunes won't instal the update errors saying cannot find itunes.msi

    Hi, kdub5.  
    Thank you for visiting Apple Support Communities.  
    I understand that you can not update iTunes due to a .msi error.  I would recommend uninstalling iTunes and all of it's components as outlined in the first article below.  For any component that gives you the .msi error, go through the steps in the second article below.  
    Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8
    "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows
    Cheers, 
    Jason H.  

Maybe you are looking for