MSY does not start after upgrade from 50SP6 to SP11

Hello experts again,
after upgrading from 50sp6 to sp11 I cannot start MSY.
I've implemented note 1099457 - AMT is starting now,
but MSY still does not start.
Has anybody some experience what this could be ?
Thanks and best regards
Gerd

Hi,
as I assume the AMT is installed completely new when doing a SP upgrade because it is a standard tool which you cannot enhance. Therefore it is running properly.
Regarding MSY you need to perform a full generation within MAS (Visual Studio) after changing the generation settings to MSY (similar to MSA) because the runtime files like MSY.DLL need to be fitting to the new SP11 framework dlls.
Regards,
Wolfhard

Similar Messages

Auto brightness does not work after upgrade from iOS5 to iOS6 on my iPod touch. Is this intended by Apple, or is it a bug?

I attempted to ask this question, yesterday. However, I am not used to typing with my thumbs, yet, and messed it up some. So, I will give this another try. Auto brightness does not work after upgrade from iOS 5 to iOS 6 on my iPod touch. Is this intended by Apple, or is it a bug?

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
iOS 6 changed how that feature works.

Screensaver does not start after upgrading to 10.7

Since upgrading to 10.7 my screensaver does not start either by hot corner or automatically. I can get it to test from the preference pane, any suggestions?

Okay.... Sorry for calling the technology airplay vice AirPrint. I have done all the standard power reset and wireless tips (i.e.delete the wireless network, re-add the wireless network, even monitored the RF frequency spectrum to make sure nobody is stomping on my wireless signal, solid 32Mbits over a Cisco 1811w). I have over 28 years in networking experience. So, I assume you all the basic stuff has been covered. Before our Apple devices got upgraded to IOS7 (2 IPads and 2 iPhones), we had no problems printing to our Brother HL-5450DN series printer (updated to the latest firmware). I strongly believe it has something to do with the AirPrint discovery process as shared in my last post. My next step is to enable port mirroring and monitor the packet exchange using wireshark or tcpdump. This will probably have to wait until the weekend.

Scanner of HP 8500 A909g does not work after upgrading from Windows 7 to Windows 10

After upgrading from Windows 7 to Windows 10 and subsequent upgrade of printer software, the scanner functionality did not work. When I tried to uninstall the printer software I got the message "HP uninstaller has stopped working". After another upgrade of printer software the scanner was still not working. How can I get around this problem? Update:
I followed the instructions for a similar problem with Windows 8 on http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Scan-doesn-t-work-on-Solution-Center-after-migrating-to-Win/td-p/2228367.After this, the scanning seems to work. Not sure whether it is possible to uninstall, though (don't want to try since it is working).

I had the same problem with my Officejet Pro 8600 All-in-One scanner, sfter upgrading from Windows 8.1 to Windows 10. After uninstalling and then reinstalling the printer driver, the problem is solved. You can look up the model of your printer on HP's support site and download it from there. Apparently, not all printers are compatible with Windows 10. In that case, they recommend you buy a new printer. ;-)

Caldav does not work after upgrade from 10.6.8

Hello!
After upgrading two test servers from 10.6.8 to 10.7.2 with no problems i decided last night it is time to upgrade our production server.
Took sometime but everything went well except for caldav service. If I understand the log right the migration to lion-calendars crashes when the script wants to put the calendars from filesystem into a database.
After reboot the script runs into the same error.
BTW the notification service does not work also. But that is not very important.
Every help is appreciated, bye
eweri
Here is the part of the log file:
more /var/log/caldavd/error.log
2011-10-26 08:28:33+0200 [-] Log opened.
2011-10-26 08:28:33+0200 [-] twistd 11.0.0 (/System/Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/ Contents/MacOS/Python 2.7.1) starting up.
2011-10-26 08:28:33+0200 [-] reactor class: twext.internet.kqreactor.KQueueReactor.
2011-10-26 08:28:33+0200 [-] calendarserver.accesslog.AMPLoggingFactory starting on "'/var/run/caldavd/caldavd.sock'"
2011-10-26 08:28:33+0200 [-] calendarserver.tap.caldav.CalDAVStatisticsServer starting on "'/var/run/caldavd-stats.sock'"
2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Upgrading to version 2
2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Regular collection hidden: /Library/Server/Calendar and Contacts/Documents/calendars/__uids__/13/93/139328E4-76C8-427C-AD0C-CB6D102C7D7 F/outbox
2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Regular collection hidden: /Library/Server/Calendar and Contacts/Documents/calendars/__uids__/21/D0/21D05230-A847-4B8D-B810-CFE793F634C B/outbox
2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Regular collection hidden: /Library/Server/Calendar and Contacts/Documents/calendars/__uids__/84/5E/845E1E6D-F13B-4233-A4E5-0055F085388 1/outbox
2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Regular collection hidden: /Library/Server/Calendar and Contacts/Documents/calendars/__uids__/B5/B6/B5B6BAA3-A5E0-4526-B7F3-15DC2811E08 3/outbox
2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Regular collection hidden: /Library/Server/Calendar and Contacts/Documents/calendars/__uids__/E0/2B/E02BEF32-1714-4C5B-85DF-0184DA8B313 3/outbox
2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Regular collection hidden: /Library/Server/Calendar and Contacts/Documents/calendars/__uids__/E2/64/E264473A-CEC7-4E1A-9756-59DE5AF62E5 0/outbox
2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Regular collection hidden: /Library/Server/Calendar and Contacts/Documents/calendars/__uids__/wi/ki/wiki-zm-r/inbox
2011-10-26 08:28:33+0200 [-] [twistedcaldav.upgrade#warn] Upgraded to version 2
2011-10-26 08:28:33+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Beginning database schema check.
2011-10-26 08:28:33+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Required schema version: 3.
2011-10-26 08:28:33+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Actual schema version: 3.
2011-10-26 08:28:33+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Schema version check complete: no upgrade needed.
2011-10-26 08:28:33+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Database schema check complete, launching database service.
2011-10-26 08:28:33+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Beginning filesystem -> database upgrade.
2011-10-26 08:28:33+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-07B1-4733-AE89-8728D0C2CB4A'
2011-10-26 08:28:34+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-5E85-4CC9-902A-A101164BD83F'
2011-10-26 08:28:34+0200 [Uninitialized] [twistedcaldav.notify.NotificationClientFactory#error] Unable to connect to notification server: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
2011-10-26 08:28:34+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-76C8-427C-AD0C-CB6D102C7D7F'
2011-10-26 08:28:37+0200 [Uninitialized] [twistedcaldav.notify.NotificationClientFactory#error] Unable to connect to notification server: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
2011-10-26 08:28:46+0200 [Uninitialized] [twistedcaldav.notify.NotificationClientFactory#error] Unable to connect to notification server: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
2011-10-26 08:28:58+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-A847-4B8D-B810-CFE793F634CB'
2011-10-26 08:28:59+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-6E96-4671-9BEB-FAABDB623EA3'
2011-10-26 08:28:59+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-C56A-462D-90E0-D60285CCF751'
2011-10-26 08:28:59+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-F13B-4233-A4E5-0055F0853881'
2011-10-26 08:29:07+0200 [Uninitialized] [twistedcaldav.notify.NotificationClientFactory#error] Unable to connect to notification server: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
2011-10-26 08:29:11+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-A2A9-4B21-8735-577F24ABA6D5'
2011-10-26 08:29:11+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-7A55-4B63-AC42-43151A1F4810'
2011-10-26 08:29:11+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-F38C-489D-88A2-42B5F47BB4AD'
2011-10-26 08:29:11+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-A5E0-4526-B7F3-15DC2811E083'
2011-10-26 08:29:12+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-97BE-43C3-94F7-A8C99AB92425'
2011-10-26 08:29:12+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-9C74-412D-8DC0-69E3ED918CAD'
2011-10-26 08:29:13+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-D6BD-450E-A8A1-708C063EF05F'
2011-10-26 08:29:13+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-EC4C-43B6-A6A8-EA02F4024EB3'
2011-10-26 08:29:14+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-1714-4C5B-85DF-0184DA8B3133'
2011-10-26 08:29:15+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-CEC7-4E1A-9756-59DE5AF62E50'
2011-10-26 08:29:26+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'XXXXXXXX-E113-470C-A824-0D988A8319FB'
2011-10-26 08:29:30+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'wiki-XXXXXXXX'
2011-10-26 08:29:32+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'wiki-XXXXXXXX'
2011-10-26 08:29:32+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Migrating calendar UID 'wiki-XXXXXXXX'
2011-10-26 08:29:33+0200 [-] Unhandled error in Deferred:
2011-10-26 08:29:33+0200 [-] Unhandled Error
        Traceback (most recent call last):
          File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 361, in callback
            self._startRunCallbacks(result)
          File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 455, in _startRunCallbacks
            self._runCallbacks()
          File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 542, in _runCallbacks
            current.result = callback(current.result, *args, **kw)
          File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1076, in gotResult
            _inlineCallbacks(r, g, deferred)
        --- <exception caught here> ---
          File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1020, in _inlineCallbacks
            result = g.send(result)
          File "/usr/share/caldavd/lib/python/txdav/common/datastore/util.py", line 146, in doMigration
            uid = fileHome.uid()
        exceptions.AttributeError: 'NoneType' object has no attribute 'uid'
2011-10-26 08:30:13+0200 [Uninitialized] [twistedcaldav.notify.NotificationClientFactory#error] Unable to connect to notification server: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
2011-10-26 08:33:19+0200 [Uninitialized] [twistedcaldav.notify.NotificationClientFactory#error] Unable to connect to notification server: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
2011-10-26 08:42:07+0200 [Uninitialized] [twistedcaldav.notify.NotificationClientFactory#error] Unable to connect to notification server: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
2011-10-26 09:06:13+0200 [Uninitialized] [twistedcaldav.notify.NotificationClientFactory#error] Unable to connect to notification server: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
2011-10-26 09:44:28+0200 [-] Received SIGTERM, shutting down.
2011-10-26 09:44:28+0200 [-] (UNIX Port '/var/run/caldavd-stats.sock' Closed)
2011-10-26 09:44:28+0200 [-] (UNIX Port '/var/run/caldavd/caldavd.sock' Closed)
2011-10-26 09:44:28+0200 [-] Main loop terminated.
2011-10-26 09:44:29+0200 [-] Server Shut Down.
2011-10-26 09:46:13+0200 [-] Log opened.
2011-10-26 09:46:13+0200 [-] twistd 11.0.0 (/System/Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/ Contents/MacOS/Python 2.7.1) starting up.
2011-10-26 09:46:13+0200 [-] reactor class: twext.internet.kqreactor.KQueueReactor.
2011-10-26 09:46:13+0200 [-] calendarserver.accesslog.AMPLoggingFactory starting on "'/var/run/caldavd/caldavd.sock'"
2011-10-26 09:46:13+0200 [-] calendarserver.tap.caldav.CalDAVStatisticsServer starting on "'/var/run/caldavd-stats.sock'"
2011-10-26 09:46:13+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Beginning database schema check.
2011-10-26 09:46:13+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Required schema version: 3.
2011-10-26 09:46:14+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Actual schema version: 3.
2011-10-26 09:46:14+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Schema version check complete: no upgrade needed.
2011-10-26 09:46:14+0200 [-] [txdav.common.datastore.util.UpgradeDatabaseSchemaService#warn] Database schema check complete, launching database service.
2011-10-26 09:46:14+0200 [-] [txdav.common.datastore.util.UpgradeToDatabaseService#warn] Beginning filesystem -> database upgrade.
2011-10-26 09:46:14+0200 [-] Unhandled error in Deferred:
2011-10-26 09:46:14+0200 [-] Unhandled Error
        Traceback (most recent call last):
          File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/application/service.py", line 184, in setServiceParent
            self.parent.addService(self)

Just to let everybody know what I am trying at the moment:
Found a thread where someone suggests to delete the postgresql-database:
Detials in this thread https://discussions.apple.com/thread/3206720?start=0&tstart=0
1. sudo serveradmin stop calendar addressbook
2. copy old 10.6.8 calender data from backup ("../Library/CalendarServer/Documents/") to /Library/Server/Calendar\ and\ Contacts/Documents/
3. delete database: sudo dropdb -U _postgres caldav
4. mv (if it exists) /Library/Server/Calendar\ and\ Contacts/Documents/calendars-migrated to /Library/Server/Calendar\ and\ Contacts/Documents/calendars-migrated-old
5. sudo calendarserver_bootstrap_database
6. now we start again: sudo serveradmin start calendar
7. watch the log file - tail -f /var/log/caldavd/error.log
And I get the same error as above but now I see a new one:
2011-10-26 15:29:19+0200 [Uninitialized] [twistedcaldav.memcachepool.MemCacheClientFactory#error] MemCache connection failed: [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionRefusedError'>: Connection was refused by other side: 61: Connection refused.
Every help is welcome, bye
Christoph

Firefox will not start after upgrade from 3.0.1

I have Firefox 3.0.1. I would like to upgrade to 3.6, but if I try to upgrade to any version, I cannot open Firefox. It is not like the other "Will not start" problems, because in the Task Manager, firefox.exe pops up, then goes away instantly. I have tried using Safe Mode, doing a clean install by uninstalling Firefox and my profile, cleaning the registry, then using CCleaner, then trying to reinstall, but the problem persists. Sometimes firefox.exe doesn't even show up in the Task Manager. I also cannot use any version of IE(even if I wanted to), Safari or Chrome. They all have the same results. I suspect that it is not a problem with Firefox, but with my computer, but I don't what is wrong. Can anyone help me?
== This happened ==
Every time Firefox opened
== I upgraded from 3.0.1

Sounds like something is killing off your browsers before they can start. I really have no idea why Firefox 3.0.1 is working somehow, though.
Do a malware check with a few different programs, you need to use all, because not all programs detect the same malware.
For each of these, make sure they are updated after installing, and run a full scan.
http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
http://www.superantispyware.com/ - SuperAntispyware
http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page

Safari does not start after upgrade to 4.0

Used Autoupgrade to upgrade to Safari 4.0 and now Safari will not launch. Mac is only two months old with very little other software installed. Any ideas how to start troubleshooting? Any FAQs on Safari 4.0 issues?
Side comment: This is pretty weak of Apple to release software that is so buggy especially for new hardware that has a standard build on it. I guess I'm moving to Firefox...

Same here, but solved.
Open up a Console and try starting Safari like I did:
-------8<-------
ki-iMac:Applications ki$ ./Safari.app/Contents/MacOS/Safari
------->8-------
Then it would come up with:
-------8<-------
2009-06-11 17:40:27.843 Safari[555:10b] GrowlSafari Error: Original (selector updateDiskImageStatus:) not found, Alternate (selector myUpdateDiskImageStatus:) was found
2009-06-11 17:40:27.845 Safari[555:10b] Loaded GrowlSafari 1.2
2009-06-11 17:40:27.868 Safari[555:10b] Videobox Safari Plugin loaded
Segmentation fault
------->8-------
After locating that plugin (does not reside in /Library/Internet Plugins/) with that posting:
[http://forums.macrumors.com/showthread.php?t=473842]
And the following commands in the console:
-------8<-------
# mkdir ~/Library/Application\ Support/SIMBL/Plugins/disabled
# mv ~/Library/Application\ Support/SIMBL/Plugins/VideoboxSafariPlugin.bundle ~/Library/Application\ Support/SIMBL/Plugins/disabled/VideoboxSafariPlugin.bundle
------->8-------
Everything works fine again.
Maybe I should update my Videobox?
Hope that helps!
Message was edited by: the.ki

WebLogic Server can not start after upgrade from 10.3.3 to 10.3.5

Hi all,
I get follwoing errors after upgrade fmw-share libraries (WLS 11.1.1.3 to 11.1.1.5), if I want to start AdminServer. It seems CLASSPATH is not updated correct. How can I solve this issue?
<Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JRF Startup Class", java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup
java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
<Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JPS Startup Class", java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
<Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "ODL-Startup", java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
<Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "AWT Application Context Startup Class", java.lang.ClassNotFoundException: oracle.jrf.AppContextStartup
java.lang.ClassNotFoundException: oracle.jrf.AppContextStartup
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
<Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JMX Framework Startup Class", java.lang.ClassNotFoundException: oracle.as.jmx.framework.wls.spi.StartupListener
java.lang.ClassNotFoundException: oracle.as.jmx.framework.wls.spi.StartupListener
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
<Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JOC-Startup", java.lang.ClassNotFoundException: oracle.ias.cache.Startup
java.lang.ClassNotFoundException: oracle.ias.cache.Startup
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
<Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "DMS-Startup", java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
Thanks,
Mohammad

Hi Mohammad,
You are right, this error seems to indicate that the script environment cannot find the required java classes.
Please try the following:
1. Open a shell (command prompt) on the computer on which you created the domain.
2. Change to the directory in which you located the domain.
By default, this directory is BEA_HOME\user_projects\domains\domain_name, where BEA_HOME is the top-level installation directory of Oracle WebLogic products.
3. Set up your environment by running one of the following scripts:
bin\setDomainEnv.cmd (Windows)
bin/setDomainEnv.sh (UNIX)
On Windows, you can use a shortcut on the Start menu to set your environment variables and invoke WLST (ToolsWebLogic Scripting Tool).
4. Invoke WLST by entering: java weblogic.WLST
The WLST prompt appears.
wls:/(offline)>
5. Then you can start the AdminServer with WLST
startServer('AdminServer','ClassicDomain','t3://localhost:7001','weblogic','password','/home/oracle/Oracle/Middleware/user_projects/domains/ClassicDomain')
This link may also help: http://download.oracle.com/docs/cd/E12840_01/wls/docs103/config_scripting/manage_servers.html#wp1009240
Hope your issue gets resolved.
Thanks,
Cris

ITunes does not start after upgrade

I'm sorry if this has already been answered, but I've looked everywhere and can't find a solution to this.
After recently getting the software upgrade for iTunes, It does not boot anymore. After accepting the iTunes agreement i get this error message
"The iTunes application could not be opened. An unknown error occured (-50)."
Uninstalling and reinstalling doesn't help. I've read some solutions for this on the windows machines and it has something to do with the sound card I believe.
G4 Mac OS X (10.4.6)

ok, so I am not sure if this is legal or not, but there is a site called oldversion. Go there, and you can get past versions of applications such as aim , and in this case, itunes. just uninstall your other itunes first.
Sometimes different versions of appications run better on different computers. this new itunes probably just has something the last one didnt that cant run with what you have on your computer

Help does not launch after upgrading from RH5 to RH7

My problem is similar to CaroMe1's. Topics within chm files
created using RH5 and integrated into our software product launch
correctly when a Help button is clicked on a dialog. After
upgrading to RH7, using the the same project files, chm files
created using RH7 do not launch at all; that is, nothing happens
when a Help button is clicked on any dialog.
Thanks in advance for any advice!

The .chm filename and the .xpj filename are the same.
Sorry if I was swerving and incoherent! I probably shouldn't
have posted after traveling and no sleep!
Here is how I tested for the source of this problem:
1. I created a .chm file using RH 5, integrated it into our
product, clicked on the Help button on any of our dialogs, and the
appropriate Help topic displayed.
2. I created a .chm file using RH 7 (using the exact same
project files as in the previous step), integrated it into our
product, clicked on the Help button on any of our dialogs, and
nothing happened. No topic, no Help. Nothing.
Is that a better description of the problem? (I hope)
Thanks again!

System does not start after upgrade to OS X 10.9

My MacBook Air does not boot. Please provide the trouble shooting steps

Please note that it is charged full and I don't see any power problem

Ir remote does'not function after upgrading from Vista to Windows 7

I just upgraded to Windows 7 Pro from Vista Home Premium. I was able to get most of my drivers to work; however, I was not able to find th edrivers/software for my IR remote control. Has anyone else figured this issue out, or what drivers/software I should get fix the error? Thank you.

ArtAppreciator, I have the same problem. Installed Windows 7 and now my HP USB TV Tuner is not working. Worked fine on Vista. I can get passed the signal setup but get an error when Media Center tries to detect the IR receiver. Any thoughts?

Safari does not start after upgrading to Snow Leopard

Hi,
I just updated my iMac to Snow Leopard. Everything works fine except for Safari.
If I open Safari, it says: You cannot use this version of Safari with this version of Mac OS X. You have Safari 4.0.3 (translated from Dutch).
In About my Mac I see that the version of OS X is 10.6.1.
Software Update says my system is Up to date.
So I downloaded Safari from the Apple site with Firefox and ran the install.
The install of Safari says in the Select Target Volume screen: Safari cannot be installed on this Disk. For this update Mac OS X 10.5.8 of higher is needed (translated from Dutch). But I have 10.6.1! Does anyone have a clue how to resolve this without loosing all my settings?
Thanks in advance!
Daniel from Amsterdam

Greetings,
Don't waste your time downloading Safari from the Apple web site; it won't work, no matter what you do, since it's not for Snow Leopard.
From what you describe, it sounds like you (or someone else) may have moved Safari from where it belongs, and therefore it wasn't updated when you installed Snow Leopard, which would cause the current version it sees to not run.
Where, exactly is Safari located on your system? Safari must be at the top level of the /Applications folder; it cannot be anywhere else or it won't work properly when updating the OS.

Firefox does not start after upgrade to v35

I updated my browser to v35.0.1 and it seems to go through the installation process, but I cannot open the browser. I see that the installation created shortcuts on the desktop and taskbar, but when I click on those, nothing happens. And I did not see any error messages during installation. I checked task manager to see if firefox process started, but it doesn't. I uninstalled / re-installed several times, but doesn't seem to help

Some work computers have locks against unknown programs. Check that
out.
Start your '''Computer''' in safe mode with networking. Then start Firefox. Try '''Safe''' web sites.
'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]'''

The Connection Server does not start after an upgrade to BO4.1 SP3

Hello guys,
The Connection Server does not start after an upgrade to BO4.1 SP3
We are in process to upgrade our Business Objects environments to BO4.1 SP3
The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
Our OS is AIX
Uncaught Exception in SilentScope: [CS] Ser
verInitialization::InitManager::Initialize: 0.007^^
The CS initialization failed within the CS server. Aborting
trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
Gerd

Hi Amine
The File seems ok
File from the failing connection server
-rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
File from our test system
-rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
I created a new connectieserver(by the copy function), but the new server won't start.
Regards
Gerd
Log
|89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
init_srv.cpp:95:-: TraceLog message 3
|4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
|77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting.

MSY does not start after upgrade from 50SP6 to SP11

Similar Messages

Maybe you are looking for