Msync not synching all data

I am working through the "mobile filed service" (task)
tutorial in the 9i lite docs.
Msync is running successfully and when I first use it
everything looks ok.
I did an update on the client db and ran msync, that was
replicated on the server.
Next I tried an update and then an insert on the server
db. Neither one was replicated onto the client by the
msync.
Also, subsequent updates on the client db are not
replicated but inserts are.
So basically after the initial sync, nothing comes
down from the server to the client and only inserts
go up to the server from the client.
I've checked most of the settings and everything looks
ok. I suspect some sort of privilege or access problem
but I'm not certain.
What/where should I start looking next ?
Windows XP (server & client). Ora 8.1.7 SE on server.
Thanks,
Peter

Thanks, I don't know how I missed that important step.
I don't find the documentation particularly clear in a
lot of areas.
Regards,
Peter

Similar Messages

Why the 2LIS_08TRTK extractor can not get all data

Hello, BW Gurus.
Why the 2LIS_08TRTK and 2LIS_08TRTLP extractors can not get all data. I had used the RSA3 and get 10 registers, when a check at the VTTK table I had 20 registers, I didnt use filters at RSA3, could you help to know what happen o correct it.

Is it because
<i>
Shipment documents and their dependent objects (shipment stages as well as shipment items [deliveries in the shipment]) are only extracted into BW when the Shipment completion status has been set.
This is necessary because the numeric values that result from the delivery documents are only established at the time. If the data were already stored earlier in BW, the shipment data would not be updated if the delivery notes were changed in BW.
</i>
- from oss note 573470.

My Ipod touch will not synch all songs in my library - on my windows 8 laptop. Doesn't matter if the songs are checked or not - only some songs will synch to the IPOD. I have multiple devices and two accounts.

My IPOD touch will not synch all songs in my library. Library is on a windows 8 laptop. Checking the songs does not matter. I have multiple devices (ipod, IPhone 4 and 5, IPad 2) and two ITunes accounts.

All songs play on the laptop windows 8. The second Ipod touch we have - all songs synch to it and play.
But the first Ipod touch we bought - only half (or so) of the songs synch. So I assume there is an issue with the newer Ipod touch. The songs not synching are songs I added to the library from CD's.

HT1386 i've already synced my itunes on my laptop with my iphone but it's not synching all of the albums/songs. Everything was purchase through itunes so i'm not sure what the issue is.

i've already synced my itunes on my laptop with my iphone but it's not synching all of the albums/songs. Everything was purchase through itunes so i'm not sure what the issue is.

What settings do you have in iTunes? Is it set to sync all music, it is set to sync only checked songs? Is there anything different about the songs that it is not syncing. Is it possible they were they purchased with a different Apple ID?

Ipod nano does not synch all contacts

ipod nano does not synch all contacts. When it synchs, it only transfers 7 of 2000+ contacts

My point in the original posting that this is a bug seems to have been answered affirmatively by the notations of the quirkiness of the action. The argument that it must not be a bug because it would have been solved by now is totally disingenuous. Apparently Apple programmers (or their management) are not any superior to Microsoft programmers in that they focus on adding new bells and whistles while allowing longstanding problems in the core code to continue to fester.

2lis_11_VAITM not inserting all data in ODS

Hello Gurus.
I'm using extractor 2lis_11_VAITM, when I test the extractor in RSA3, it is bringing me all registers of table VBAP, but when I load this extractor into an ODS in BW, It is not inserting all registers into the cube, some "return orders" are missing, how can i solved this problem ???? I'm using in ODS key Doc number and position.
THANKS IN ADVANCED.

Hi Sudheer, ther is no selections during data load, and also ther isn't any routine(either in transfer or update rules). It's supposed that all registers have to be loaded to the ODS no ?? because i'm using key Doc number and positions, so I want all documents with all positions to be loaded, but this is not happening, there are missing the "'return orders'".
Any other idea of why this is happening ??

FDM export to HFM - 2nd export did not clear all data from 1st export?

Has anyone experienced exporting a replacement FDM file to HFM where the 2nd file did not contain an account that was present in the original file and that account/value in the 1st file then remained in the HFM trial balance and caused it to be out of balance? Does the replace export option not clear all the prior file data? The only unusual part of it might be that the problem account was derived using logic group script? Thanks.

Thanks Hensen - Sure, it was easy enough to fix once I deduced what the problem was - although my solution was just to use the data clear function and reload. The real question is how to prevent it from happening again and it sounds like I can't do much about it - other than trying to train the users to watch out for do-over files that have fewer accounts than the original load?? Am I wrong to think that HFM should try to fully clear all previous data from a load file if there is a replacement or at least try to validate whether or not all prior accounts have been repopulated?? There's plenty of good validation in the validation step of FDM. Why not during the export step? If this makes sense, I'll put in another "enhancement request" to support.

Help: Not getting all data from text data type

Hi there
I have a stored procedure that returns a couple of fields and one of the fields is of datatype TEXT. In my ResultSet, I do not get all the data back that is stored in the TEXT datatype. I have say about 600 charactors in this field, but only 30 charactors are returned. Is there a reason why this is happening and how can I fix it?
Please help?
Thanks

I set that field to have a normal string of about 50 charactors. Namely: "this is a note that is about 49 charactosrs long." (exclude the quotes). And I still got 30 charactors back only.
I set a shorter text value of 21 charactors and that returned all 21 charactors.
The text that is usually in this field is:
"URL=SubsidiaryNarrative.html�BABY_CARE_PRODUCTS=false�AIDS_FOR_PHYSICALLY_DISABLED=false�SPORT_SUPPLEMENTS=true�NATURAL_REMEDIES=false�COSMETICS_FRAGRANCE=false�WOMANS_HEALTH=false�ADDITIONAL_CARDS=No�EXERCISE_ROUTINE=Yes�NUMBER_OF_CHILDREN=0"
And I got out "URL=SubsidiaryNarrative.html�B"

Ical not storing all data & cant initialize lists

okay so im trying to store all ical data in seperate lists for hours months years and the actual event ect....it worked fine for a while but now its not storing all the events....and then when it did it would carry over from one run to another. I figured out that was probably because they were properties but when i make the lists global i get a "this variable is not initialized" problem. and even if i somehow managed to fix that its still not reading in all the data. ive been at this for 2 hours and cant see the problem. please help:
variable defs:
(*System Variables*)
global running_processes
global _weekday
global _date
global _month
global _year
global _hours
global _minutes
global _seconds
global time_ofday
(*iCal Variables*)
global iCal_Open
global iCal_Run
global iCal_Calendars
global iCal_Events
global icaleventsstore
global icaleventslast
global iCalEvents_StartMonth
global iCalEvents_StartDate
global iCalEvents_Startyear
global iCalEvents_Starthours
global iCalEvents_StartMinutes
global iCalEvents_EndMonth
global iCalEvents_EndDate
global iCalEvents_Endyear
global iCalEvents_Endhours
global iCalEvents_EndMinutes
global iCalEventsStart
global iCalEventsEnd
code to split up dates and date:
on Ref_Events()
proc()
if running_processes contains "iCal" then
(*if iCal is open do the code as normal*)
set iCal_Run to 1
set iCal_Open to 1
tell application "iCal"
set iCalEventsStart to the start date of every event in every calendar
set iCalEventsEnd to the end date of every event in every calendar
set iCal_Events to the summary of every event in every calendar
set x to 1 --holds calendar to be used
set y to 1 --holds event to be used
repeat while x is less than or equal to the number of items in iCal_Events
repeat while y is less than or equal to the number of items in item x of iCal_Events
get item y in item x in iCalEventsStart as string
set temp_date to the result
--start dates
set iCalEvents_StartMonth to iCalEvents_StartMonth & the second word of temp_date
set iCalEvents_StartDate to iCalEvents_StartDate & the third word of temp_date
set iCalEvents_Startyear to iCalEvents_Startyear & the fourth word of temp_date
set iCalEvents_Starthours to iCalEvents_Starthours & the fifth word of temp_date
set iCalEvents_StartMinutes to iCalEvents_StartMinutes & the sixth word of temp_date
--end dates
get item y in item x in iCalEventsEnd as string
set temp_date to the result
set iCalEvents_EndMonth to iCalEvents_EndMonth & the second word of temp_date
set iCalEvents_EndDate to iCalEvents_EndDate & the third word of temp_date
set iCalEvents_Endyear to iCalEvents_Endyear & the fourth word of temp_date
set iCalEvents_Endhours to iCalEvents_Endhours & the fifth word of temp_date
set iCalEvents_EndMinutes to iCalEvents_EndMinutes & the sixth word of temp_date
--event description
get item y in item x in iCal_Events as string
set temp_event to the result as string
set icaleventsstore to icaleventsstore & temp_event
set y to y + 1
end repeat
set x to x + 1
end repeat
end tell
else
(*if iCal is not open do the code then close it*)
if iCal_Run is 0 then
set iCal_Run to 1
tell application "iCal"
set iCalEventsStart to the start date of every event in every calendar
set iCalEventsEnd to the end date of every event in every calendar
set x to 1 --holds calendar to be used
set y to 1 --holds event to be used
repeat while x is less than or equal to the number of items in iCalEventsStart
repeat while y is less than or equal to the number of items in item x of iCalEventsStart
get item y in item x in iCalEventsStart as string
set temp_date to the result
--start dates
set iCalEvents_StartMonth to iCalEvents_StartMonth & the second word of temp_date
set iCalEvents_StartDate to iCalEvents_StartDate & the third word of temp_date
set iCalEvents_Startyear to iCalEvents_Startyear & the fourth word of temp_date
set iCalEvents_Starthours to iCalEvents_Starthours & the fifth word of temp_date
set iCalEvents_StartMinutes to iCalEvents_StartMinutes & the sixth word of temp_date
--end dates
get item y in item x in iCalEventsEnd as string
set temp_date to the result
set iCalEvents_EndMonth to iCalEvents_EndMonth & the second word of temp_date
set iCalEvents_EndDate to iCalEvents_EndDate & the third word of temp_date
set iCalEvents_Endyear to iCalEvents_Endyear & the fourth word of temp_date
set iCalEvents_Endhours to iCalEvents_Endhours & the fifth word of temp_date
set iCalEvents_EndMinutes to iCalEvents_EndMinutes & the sixth word of temp_date
--event description
get item y in item x in iCal_Events as string
set temp_event to the result as string
set icaleventsstore to icaleventsstore & temp_event
set y to y + 1
end repeat
set x to x + 1
end repeat
end tell
quit application "iCal"
end if
end if
if icaleventsstore is not icaleventslast then
say "new events stored in I Cal. Would you Like to View a List of all events?"
display dialog "View List of Events?" buttons {"Yes", "No"} default button 2
if the button returned of the result is "Yes" then
choose from list icaleventsstore with prompt "All the Current Events"
else
-- action for 2nd button goes here
end if
set icaleventslast to icaleventsstore
end if
end Ref_Events

You need to be careful when using conditional statements to set global variables (the global declaration does not set any values). I can't tell from the just the one handler you posted, but an example would be the iCal_Run variable - unless it is declared somewhere else, it won't have a value if there isn't an iCal process.

St03N not collecting all data

HI
does anyone know why would st03n not collect all proper data, we found out recently that a user had scheduled a program as a background job to run and it ran successfully but when we look on that date we don't see that it had run and even that user doesn't come out in the history
any ideas why?
regards

Sorry Sujit that I wasn't clear
the job i was referring to was a z program that was run be a user in the background.
that is how we started knowing that there were missing data in st03n
we were trying to see how many time that program ran and who ran it
so we went to see in st03n but we found out that there was no history for that program in there or any history for the user who ran the z program in the background.
there is no connection to SAP_COLLECTOR_FOR_PERFMONITOR background job. this job is running successful in our system and all other data is being collected
so the data that was missing was on the 14th of march and then we found out that there is no entry of any sort in st03n for 15th of march, but we have data for 16th of march.
so now we want to know what happened
i hope this is clear now
regards

Unwrap not unwraping all data sent from server

java client server NIO ssl
At server end send about 50 packets are written using this method:
sendPacket(String packet)
writeBuffer = charSet.encode(packet);
c.ssl.outNetBB.clear();
c.ssl.engine.wrap(writeBuffer, c.ssl.outNetBB);
c.ssl.outNetBB.flip();
//write message to socket channel
while (c.ssl.outNetBB.hasRemaining())
socketChannel.write(c.ssl.outNetBB);
At the client end I read all these packets:
inNetBB.clear();
int bytesread = socketChannel.read(inNetBB);
inNetBB.flip();
requestBB.clear();
res = engine.unwrap(inNetBB, requestBB);
It seems like all the 50 packets are read into inNetBB 6000 bytes
But the unwrap only consumes 70 bytes and produces 100
This first 100 bytes is unencrypted correctly and corresponds exactly to one write of the 50 from the server. I dont know why.
Why am I getting only the first packet of the 50 sent??
[ Ive tried : while inNtBB.hasRemaining for repeated unwraps
but only the first packet is output still ]
TIA
pbutler

If I'm reading this right, you're writing (wrapping) about 50 separate SSL packets, and then unwrapping just one.
Recall:
The SSLEngine produces/consumes complete SSL/TLS packets only, and
does not store application data internally between calls to wrap()/unwrap().So it looks to me like you need to keep unwrapping the rest of your 5930 bytes to get the remainder of the application data.
[ Ive tried : while inNtBB.hasRemaining for repeated unwraps
but only the first packet is output still ]Are you inadvertantly clearing the inNtBB before you call your additional unwraps?
If you have lots of small packets, you might want to consider buffering them up and wrapping them to the SSLEngine/SocketChannel all at once. You'll pay less in overhead.

IPhone not synching all photos.

I am having a strange issue with synching my iPhoto library with my iPhone. For some reason, only about half my photos get synched onto the phone. I had first noticed this when trying to dig up some photos of my son and noticing that I only had the ones from right after he was born about a year and a half ago. Even more curious, when I tried to reset photo synching by turning it off, the phone retained the pictures. Even stranger, I could not delete them from the iPhone by going to Settings>General>Usage.
My iPhoto library is on my Mac Mini running OS 10.6.8. My iPhoto version is 9.2.3 (can't upgrade further without upgrading to Lion). I knew this was not an issue with insufficient space on my iPhone because the status bar at the bottom in iTunes indicates that even with the entire iPhoto library synching, 6 GB is left over.
I had seen a similar issue on someone's iPad, and the solution was to back it up through iTunes, restore the OS onto the iPad, and let the restored backup re-populate with data. Unfortunately, this did not work for my iPhone. I even turned off photo synching before the restore to confirm that there were no photos on the phone after the iOS restore. I then turned photo synching back on, and once again, only half of my iPhoto library synched. I got an error message on my phone that "3,268 photos could not be synched to your iPhone because of a problem. Check iTunes for details." However, there was no message in iTunes to indicate what the error was. The photos just did not synch.
Next, I tried emptying the iPod Photo Cache inside the iPhoto library and synched again. iTunes rebuilt the cache, but still did not synch the photos. I got the same error message on my phone, and no indication of a problem in iTunes.
The next thing I was going to try was to rebuild the iPhoto library, but if anyone out there has seen this issue and resolved it, please let me know, as it would save me a lot of time.

Hi mrchanbong,
When researching the error message you provided, I found the following resource which may assist you:
iTunes: Unable to sync photos
http://support.apple.com/kb/TS3697
Thanks,
Matt M.

Emails do not download all data

Emails do not download all data

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

VO not retrive all data

Hi
I create view object for entity, the query of view object not return all record from database. Is there any option for fitch all record from database?

JDev version?
Technology you use?
Where do you look for the all(?) rows?
If you are using ADF there is a fetch size defined by the iterator (normally 25) which limits the number of rows returned for one round trip. To see more records you have to scroll.
Timo

IPhoto not synching all photos to iPhone 4S

When I try to sync iPhoto to my iPhone 4S it will not sync all the photos it says see iTunes for more information, but on my iPad 4th Gen it syncs all photos no problem any help will be appreciated

Accidently posted in wrong forum please move to correct one

Msync not synching all data

Similar Messages

Maybe you are looking for