MT doesn't recognize my AppleID for installed applications through AppStore (i own just one AppleID)

Dear Apple, i own just one AppleID!
And it sounds like i'm not the only one who is facing this issue.

Sorry for that.
I've been using my MacBookPro since 2010 with no problems at all so far. Just yesterday i figured out that all the apps purchased through the AppStore cannot be updated. I've heard other collegues facing in front of this problem.
At first I with to confirm you that i own just an Apple ID. If i uninstall any of these applications listed in my AppStore then next i'm able to reinstall them downloading the app again from the store (and that would prove that i'm the designated owner for Apple). By the way after the new installation a button, asking to perform an app update, comes up. And again i fall into the issue previoulsy explained. Weird isn't it?
I remember for sure that i have already updated some apps through the AppStore with Lion in the past.
Thank you in advance for any kind help i can get from this discussion.
Michele

Similar Messages

  • Everytime I open my computer it says my server doesn't recognize my password for my account US holidays. How do I do to fix this pop-up?

    Everytime I open my computer it says my server doesn't recognize my password for US holidays. How do I fix?

    Thank you but I guess I wasn't too clear. The link to the bugzilla information is about a very bad update that can NOT be trusted and if you read it the Mozilla folks hard blocked it and took legal action against whomever was sending it out.
    The pop up I keep getting I can not trace who or where it is from. So on two unrelated matters I 1) have this non stop update that keeps popping up and 2) saw an article about a bad Firefox update that had been blocked. I put the two together and thought maybe my pop up was what the article was about and how can I tell if it is malice or a real FF update? Clear as mud now? lol

  • II can't reset my APPLEID password because it doesn't recognize my APPLEID!!!  I have always had the same one!

    I can't reset my APPLEID password because it doesn't recognize my APPLEID!!!  I have always had the same one!

    Your Apple ID
        1.  Forgot Apple ID
        2.  Apple ID - Apple Support
        3.  Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support

  • Why App store doesn't recognize my Aperture 3 installed from the disk version?

    I have installed Aperture 3 from the DVD some months ago (bought 129 EUR). And the App Store does not recognize it (no popup "installed" but "Buy" for 62,99 EUR).
    Could you tell me why?
    J'ai installé Aperture 3 depuis le DVD il y a quelques mois  acheté 129 EUR). App Store ne reconnait cette version (il n'indique pas "installé", mais "acheter" (pour 62,99 EUR).
    Pouvez-vous me dire pourquoi ?

    Maybe it's simply because you have the disc version so it doesn't recognize it. I have heard that there are some differences between the app store version and the disc (I believe due to licensing, but i'm just going on what I remember)

  • MAS doesn't recognize custom Mobile Sales UI application for generation

    Hello,
    I've upgraded a Mobile Sales development workstation from CRM5.0 SP08 to CRM5.0 SP13.
    When I try to generate the user interface in MAS I observe the following:
    In MAS I created a new project (via menu entry "Build->Generator settings.." - project name "MON", dll name "MON", UI application "Y_MobileSales").
    But when I check the project dependencies in the visual studio project (menu Project->Project Dependencies..) there is no MON-project available (only the visual studio project itsefl and sfabol). Thus, I can't generate the dll-file, either (I've closed and re-opened MAS multiple times without any effect).
    When I change the UI project to standard values ( UI application "MobileSales"), the entry MON is available within the project dependencies.
    It seems that MSA doesn't recognize the custom UI appliction Y_MobileSales. Everything worked fine within SP08, though.
    Any ideas? Best regards
    Herwig

    Hi Shankar,
    sorry, that I couldn't reply earlier. But after implementing the note we've still the same problem. The MAS doesn't take a custom Mobile Sales UI application into account for generation.
    The option "ENABLEFORCEGEN" is be resettet to "False" after opening the Mobile Application Studio.
    In the Configuration Manager I can't see the UI-Project, only the "sfabol" project appears there. Thus, I can't build the UI solution.
    Any ideas?
    Thanks and best regards
    Herwig

  • Cs6 doesn't recognize NVidia Card for graphics processing?

    On starting up Cs6 for the first time, the program said that it doesn't recognize the NVidia GeForce 7300 GT. Is this right? Is this going to be true for the release?

    That's a bummer. I had the same problem but can't remember the exact steps I took to fix it. At first it would not recognize my graphics cards because they were different (NVIDEA, RADEON), and would ONLY recognize the NVIDEA 7300. Then I updated all the drivers and swapped the order of my cards around, and changed the slot settings with the Expansion Slot utility (if you are on an older MacPro). After some tweaking they all loaded and are working well but don't have all the extra features that a new graphics card would have.

  • When I try to set up my gmail account to imap on iphone 4s it says it doesn't recognize my password for gmail

    When I try to set up my gmail account on imap on iphone 4s it says it doesn't recognize my password even though my gmail account works on my computer.

    Try it both with and without the @gmail part.
    At one time it was optional, now Gmail seems to want the entire username.
    If that doesn't fix it, sign out from your computer and and log in again, but type the password to verify it is really correct. There is no mystery to it, Gmail will work with the correct name and password.

  • Can I clear all the history for a selected site like CNN, not just one "reference" at a time for CNN

    I want to be able to clear certain parts of history. Not all of it for a time, and not just one "entry" at a time. For example: I have lots of entries in history for CNN or ESPN website. Can i remove all of the CNN entries at one time? Clearing it in that kind of grouping. I hope this is clear I am not so good with computer lingo. Thanks

    You can also use a colon (:) that is present to specify the protocol in the search bar.
    In the site bar you can sort by visited date and in the library you can click a column header (e.g. location) to the the history items.
    Note that you can copy (drag/drop) history items to a bookmarks folder to save (preserve) them as bookmarks.
    You would need to use a place: query and create a so called smart folder to have more control.
    *https://developer.mozilla.org/en/Places_query_URIs

  • New Mac Doesn't Recognize Old Mac For Firewire Migration

    I attempted to migrate my files from my G5 desktop to my new Intel desktop MacPro using Migration Assistant and a Firewire cable. It instructed me to connect the two Macs with a Firewire cable and restart the old Mac holding down the "T" key. I did just that, the Firewire logo came up on my old Mac as a screensaver, but the new Mac just sat there saying, "Waiting for disc" or something like that. Rebooting both computers had no effect.
    Some additional background -- I started the process earlier today and it worked fine, but I aborted (by disconnecting the Firewire cable) after realizing it would take over seven hours to complete. I then upgraded the new Mac from Tiger to Leopard with an Erase and Install. When I attempted the process again later, the new Mac would no longer recognize the old one.
    Could it be a case of Leopard not recognizing Tiger? Any other suggestions?

    For anyone else experiencing this problem, I wound up having to reformat my new computer with Tiger before it would recognize the old computer. :/

  • Adobe After Effects CC Doesn't recognize Alpha Key for imported DNxHD (.mov) clips

    After Upgrading To Adobe CC, we faced a problem when we try to import our HD assets (Quicktime .mov Codec: DnxHD 1080i 120). they are imported as one layer.. there NO Alpha key.
    These Clips dont have such problem when we import them into Adobe After Effects CS6.
    Please Adobe, we need a fast solution. this is urgent.
    Note that we tried to download the last version of AVIDCodecLE package with no result!
    thanks for any idea.

    ADOBE - THIS IS ABSURD - FIX THE DAMN BUG
    Our studio waited until now to update - what a huge mistake, waste of money, waste of time. Fortunately, older versions still run fine on the systems we "upgraded".
    We have years of assets that no longer work correctly in CC or CC14. We are a major production studio with literally thousands of assets that exist in a multi million dollar ISIS system. CC and CC2014 are worthless until this gets fixed. I'm sitting here looking like a amateur because nothing works. THANKS GUYS! - No, we're NOT going to go back and "re-render" all of those assets. We will just continue to use the no monthly fee Cs6, forever.
    We will not be renewing any of our "contracts" until this bug is fixed (about 30 licenses). Back to CS6.

  • Mountain Lion's Mail doesn't recognize keyboard shortcuts for formatting characters.

    Usually in Mail you can press Command-I, and the characters you type are italicized. The same with Command-B (bold), Command-U (Underline), etc. After installing Mountain Lion, these keyboard shortcuts are no longer recognized in Mail. The only way to format characters is to select text, control-click the highlighted text, and from the contextual menu select Font, which lets one choose Bold, Italic, or Underline.
    How can I make Mail work with the supposedly built-in keyboard shortcuts?
    (I experienced this problem with Snow Leopard, but my installation of Lion corrected the issue. Now Mountain Lion brings it back agian. Sheesh.)

    (x-post) Ended up on a call with apple support. THey had me disable login items and go through system folder and dump a lot of extensions.  Kill all /library/launchagents and /library/launchdaemons  all of them.
    He said the likely culprits are /library/extensions... instanton and soundflower. I killed those.
    so my system has been given an enema, and the problem has gone away.

  • My computer doesn't recognize my iPod when hooked up through a USB port?

    I restarted my computer and my iPod, and it doesn't work. The iPod does not recognize being hooked up to a computer, and the computer does not recognize that the iPod is hooked up to it. My iPod's not even charging when connected to my computer. This first occured when I disconnected my iPod from my XBox 360 while the 'Do Not Disconnect' screen was shown. However, the iPod still works with my XBox 360 as well as my AC adapter charger. The iPod also does not show in Device Manager, so it's not recognized by Windows or iTunes. Any help is greatly appreciated, thanks in advance.
    Windows XP   Windows XP   Compaq Presario Intel Pentium 4

    Try here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Yu need iTunes 10.5 or later

  • Apple TV doesn't recognize computer over WiFi, but does through Ethernet

    Home Sharing from iTunes on my Mac Pro to an Apple TV (2nd Generation) only works if the Apple TV is connected to the router using Ethernet (i.e., hardwired). With WiFi (using the same router), the Apple TV won't detect the Mac Pro library. Everything else works fine over WiFi (e.g., Netflix and movie rentals). I can even control the Apple TV using my iPad when connected via WiFi or Ethernet. The only thing that doesn't work via WiFi is access to a network iTunes library. Any suggestions? The router is in bridge mode (i.e., it is an extension of the router that the Mac Pro is connected to). However, since the hardwire connection works, why wouldn't the WiFi connection work? And why does it work for everything but the network library.

    Thanks for the suggestions. The problem actually solved itself. When I unplugged my Apple TV, the wireless wasn't recognized so I put it to sleep and woke it back up. When it came back on, the wireless recognized my Mac Pro library. If anyone else has trouble, you might try getting the Apple TV to recognize the desktop by using a hardwire. Then restart the Apple TV (or put it to sleep and wake it back up) with the ethernet unplugged and see if it will show up.
    By the way, the bridge mode on my extender isn't a problem. I can hardwire or wireless to the extender router and the IP address on the Apple TV is the same as the host router (i.e., the one that the Apple TV is not plugged into).
    Thanks again.
    -Andrew

  • Query rule for installed applications

    Need a query where I am looking for machines that have both java 7.0.65 and any other installed java version. I need to run a parse script to remove the older versions of java from the machines.
    So something where show me all the machines that hav 7.0.65 and also have any other version installed. Will run a msiexec /x "java" with a variable for all possible versions and force remove them all.

    Need a query where I am looking for machines that have both java 7.0.65 and any other installed java version. I need to run a parse script to remove the older versions of java from the machines.
    what is the point having collection that have java and any other installed java ? with this,you will get all machines that have java installed.
    if you want to create collection that have java other versions of Java other than 7.0.65,you should try to use sub selected queries.
    have a look at Garth post explaining about how to use sub     selected http://be.enhansoft.com/post/2014/09/24/Subselect-Query-for-SCCM-Queries-or-Collections-(WQL).aspx
    Eswar Koneti | Configmgr blog:
    www.eskonr.com | Linkedin: Eswar Koneti
    | Twitter: Eskonr

  • HT1848 my ipod touch 4th generation will not power on, and itunes doesn't recognizes it when it is connected through the usp

    I can not get my Ipod touch to power on, and it isn't recognized by itunes when it is plugged in. does anyone know what the problem could be and or have had the same problem and fixed it??? I appreciate any and all help with this problem, and definately open for suggetions. Thanks again. Cynthia

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for

  • Unable to copy table in same Database

    I m using jdbc:odbc bridge to connect to MS access database. i am trying to create a table by copying data from another table in same database. the code is Statement stmt = mycon.createStatement(); String query = "create table " + temp1 + " as select

  • FM for billing doc pricing condition

    Hi is there a Fm that returns all the pricing conditions for a billing document (Header and line items) with the condition types and the amounts?? I tried to use the FM RV_INVOICE_DOCUMENT_READ, but i think this FM does not return the condition types

  • Write raw data to plist?

    I've been trying this for over a day now, but to no avail. The specific reason is I have a bootcamp partition set up with Win7, and like to keep my Windows home folder in the Finder Sidebar, which requires some cajoling. I got it working the first ti

  • General ABAP clarifications

    1.How to design subscreens in selection-screen in a report program? 2.how to u design tabs selection screens?like for one Tab one display and other Tab other display ..? 3.in selection screen there are 20 fields but in display i need to display only

  • SetVisible(true) but doesn't show up

    What I'm trying to do is get the writeAll panel to show up when they click the Write button in the menu. I have it so it's set to invisible after it's created so it only shows up when they click the write button, only it doesn't show up. I've put bre