Mta - poa communcation issues after 8.0.1 hp1 upgrade

Hello,
Upgraded to 8.0.1 hp1 about a month ago, and since doing so have had to reboot the server twice (about every 2 weeks) to restore mta - poa communications.
Small GroupWise system, all components (poa, mta, gwia and webacc) on the same physical server, running NetWare 6.5 sp8... no problem before upgrade.
Basically, looking at the mta and poa logs you can see that they simply can't speak with one another. As I said, things run fine for a couple of weeks, then over the course of a day the system will begin to fail and eventually need a reboot (this leads me to believe this is NOT a simple configuration issue).
Here are the logs for both the poa and mta before my last reboot:
---------- 0615POA.001
00:48:29 02A MTP: ndsudom: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7100
00:48:29 02A MTP: Unable to connect to send: link blocked [8908]
01:20:00 02A MTP: ndsudom: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7100
01:20:00 02A MTP: Unable to connect to send: link blocked [8908]
04:33:35 028 MTP: ndsudom: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7100
04:33:35 028 MTP: Unable to connect to send: link blocked [8908]
06:32:56 02C MTP: ndsudom: Unable to open connection [8912]. Address = xxx.xxx.xxx.163, Port = 7100
06:32:56 02C MTP: Unable to connect to send: link blocked [8912]
07:01:15 02C MTP: ndsudom: Unable to open connection [8911]. Address = xxx.xxx.xxx.163, Port = 7100
07:01:15 02C MTP: Unable to connect to send: link blocked [8911]
07:01:38 04E MTP: ndsudom: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7100
07:01:38 04E MTP: Unable to connect to send: link blocked [8908]
07:47:06 056 MTP: ndsudom: Unable to open connection [890F]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:06 056 MTP: Unable to connect to send: link blocked [890F]
07:47:06 028 MTP: ndsudom: Unable to open connection [890F]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:06 028 MTP: Unable to connect to send: link blocked [890F]
07:47:07 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 028 MTP: Unable to connect to send: link blocked [8925]
07:47:07 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 056 MTP: Unable to connect to send: link blocked [8925]
07:47:07 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 056 MTP: Unable to connect to send: link blocked [8925]
07:47:07 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 028 MTP: Unable to connect to send: link blocked [8925]
07:47:07 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 028 MTP: Unable to connect to send: link blocked [8925]
07:47:07 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 056 MTP: Unable to connect to send: link blocked [8925]
07:47:07 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 056 MTP: Unable to connect to send: link blocked [8925]
07:47:07 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 028 MTP: Unable to connect to send: link blocked [8925]
07:47:07 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 028 MTP: Unable to connect to send: link blocked [8925]
07:47:07 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 056 MTP: Unable to connect to send: link blocked [8925]
07:47:07 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:12 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:12 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:17 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:17 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:22 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:22 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:28 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:28 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
---------- 0615MTA.001
00:26:11 043 MTP: ndsupo-ipS2: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
00:26:28 041 MTP: ndsupo-ipS1: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
00:32:52 017 MTP: ndsupo-ipS0: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
00:33:08 041 MTP: ndsupo-ipS1: Unable to open connection 0x8912. Address = xxx.xxx.xxx.163, Port = 7101
01:27:58 017 MTP: ndsupo-ipS0: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
01:29:05 043 MTP: ndsupo-ipS2: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
02:22:06 045 MTP: ndsupo-ipS3: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
02:22:11 045 MTP: ndsupo-ipS3: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
02:24:16 041 MTP: ndsupo-ipS1: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
02:25:18 043 MTP: ndsupo-ipS2: Unable to open connection 0x8912. Address = xxx.xxx.xxx.163, Port = 7101
02:38:14 043 MTP: ndsupo-ipS2: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
02:50:04 041 MTP: ndsupo-ipS1: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
02:50:21 045 MTP: ndsupo-ipS3: Unable to open connection 0x8912. Address = xxx.xxx.xxx.163, Port = 7101
02:52:12 017 MTP: ndsupo-ipS0: Unable to open connection 0x8912. Address = xxx.xxx.xxx.163, Port = 7101
04:34:24 041 MTP: ndsupo-ipS1: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
04:40:21 043 MTP: ndsupo-ipS2: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
04:40:26 043 MTP: ndsupo-ipS2: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
05:54:03 043 MTP: ndsupo-ipS2: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
06:28:08 041 MTP: ndsupo-ipS1: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:01:11 045 MTP: ndsupo-ipS3: Unable to open connection 0x8911. Address = xxx.xxx.xxx.163, Port = 7101
07:01:11 041 MTP: ndsupo-ipS1: Unable to open connection 0x8911. Address = xxx.xxx.xxx.163, Port = 7101
07:01:16 045 MTP: ndsupo-ipS3: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:01:40 045 MTP: ndsupo-ipS3: Unable to open connection 0x8912. Address = xxx.xxx.xxx.163, Port = 7101
07:22:20 043 MTP: ndsupo-ipS2: Unable to open connection 0x8911. Address = xxx.xxx.xxx.163, Port = 7101
07:22:21 043 MTP: ndsupo-ipS2: Unable to open connection 0x8911. Address = xxx.xxx.xxx.163, Port = 7101
07:22:23 045 MTP: ndsupo-ipS3: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:22:25 041 MTP: ndsupo-ipS1: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:30:48 043 MTP: ndsupo-ipS2: Unable to open connection 0x8911. Address = xxx.xxx.xxx.163, Port = 7101
07:30:58 043 MTP: ndsupo-ipS2: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:34:20 043 MTP: ndsupo-ipS2: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:34:22 043 MTP: ndsupo-ipS2: Unable to open connection 0x8911. Address = xxx.xxx.xxx.163, Port = 7101
07:34:55 017 MTP: ndsupo-ipS0: Unable to open connection 0x8912. Address = xxx.xxx.xxx.163, Port = 7101
07:39:15 043 MTP: ndsupo-ipS2: Unable to open connection 0x8911. Address = xxx.xxx.xxx.163, Port = 7101
07:39:17 043 MTP: ndsupo-ipS2: Unable to open connection 0x8911. Address = xxx.xxx.xxx.163, Port = 7101
07:40:34 017 MTP: ndsupo-ipS0: Unable to open connection 0x8912. Address = xxx.xxx.xxx.163, Port = 7101
07:41:48 045 MTP: ndsupo-ipS3: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:42:52 017 MTP: ndsupo-ipS0: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:43:33 041 MTP: ndsupo-ipS1: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:44:22 045 MTP: ndsupo-ipS3: Unable to open connection 0x8912. Address = xxx.xxx.xxx.163, Port = 7101
My best guess at this point is to perform a top down rebuild of the databases to correct the issue.... has anyone experienced a similar issue?
Thanks,
Gary

Looking at the webacc logs I also see GWDVA errors. It is also complaining about not being able to talk, so this does not appear to be just a MTA/POA issue.
Gary
---------- 0615WEB.001
06-15-10 00:00:43 Error: GWDVA is down- document viewing unavailable
06-15-10 00:02:12 Error: GWDVA is down- document viewing unavailable
06-15-10 00:03:14 Error: GWDVA is down- document viewing unavailable
06-15-10 00:10:59 Error: GWDVA is down- document viewing unavailable
06-15-10 00:23:43 Error: GWDVA is down- document viewing unavailable
06-15-10 00:25:59 Error: GWDVA is down- document viewing unavailable
06-15-10 00:39:03 Error: GWDVA is down- document viewing unavailable
06-15-10 00:45:26 Error: GWDVA is down- document viewing unavailable
06-15-10 01:17:06 Error: GWDVA is down- document viewing unavailable
06-15-10 01:47:51 Error: GWDVA is down- document viewing unavailable
06-15-10 01:50:10 Error: GWDVA is down- document viewing unavailable
06-15-10 01:55:52 Error: GWDVA is down- document viewing unavailable
06-15-10 01:59:49 Error: GWDVA is down- document viewing unavailable
06-15-10 02:22:24 Error: GWDVA is down- document viewing unavailable
06-15-10 02:23:12 Error: GWDVA is down- document viewing unavailable
06-15-10 02:24:01 Error: GWDVA is down- document viewing unavailable
06-15-10 02:25:44 Error: GWDVA is down- document viewing unavailable
06-15-10 02:47:14 Error: GWDVA is down- document viewing unavailable
06-15-10 02:53:45 Error: GWDVA is down- document viewing unavailable
06-15-10 04:32:57 Error: GWDVA is down- document viewing unavailable
06-15-10 04:34:37 Error: GWDVA is down- document viewing unavailable
06-15-10 04:38:59 Error: GWDVA is down- document viewing unavailable
06-15-10 04:40:02 Error: GWDVA is down- document viewing unavailable
06-15-10 05:09:33 Error: GWDVA is down- document viewing unavailable
06-15-10 05:17:18 Error: GWDVA is down- document viewing unavailable
06-15-10 05:43:51 Error: GWDVA is down- document viewing unavailable
06-15-10 06:06:04 Error: GWDVA is down- document viewing unavailable
06-15-10 06:08:01 Error: GWDVA is down- document viewing unavailable
06-15-10 06:28:20 Error: GWDVA is down- document viewing unavailable
06-15-10 06:29:49 Error: GWDVA is down- document viewing unavailable
06-15-10 07:17:38 Error: GWDVA is down- document viewing unavailable
06-15-10 07:28:18 Error: GWDVA is down- document viewing unavailable
06-15-10 07:30:45 Error: GWDVA is down- document viewing unavailable
06-15-10 07:32:46 Error: GWDVA is down- document viewing unavailable
06-15-10 07:43:54 Error: GWDVA is down- document viewing unavailable
06-15-10 07:45:23 Error: GWDVA is down- document viewing unavailable

Similar Messages

Reporting authorization issue after BI 701 05 EHP1 upgrade

Hello,
We have recently upgraded our BI 7.0 to BI 701 EHP1 with 05 patch level. After this we had a problem with reporting authorizations for a report (query), which has created under Virtual Infoprovider.
Earlier the report use to be execute perfectly with authorizations S_RS_ICUBE object with Act 03, Subobject DATA, but after upgrade to EHP1, while executing report its throwing a error pasted below.
=============================================================================================
"Diagnosis
Errors occured while reading a VirtualProvider outside the BI system. Check whether the previous error messages contains any information about the possible cause of this error.
It is possible that the error message can not be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error class in the source system of the VirtualProvider.
System Response
Procedure
Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occure with the connection to the system; these can lead to system termination. If the code for the VirtualProvider is not from the SAP, contact the relevant person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors."
===============================================================================================
After running st01 trace we identified the missing authorization is S_RS_ICUBE with Act 03, subobject DEFINATION.
Here please tell why is the subobject check is performed to execute a report (query), as this is happening after EHP1 upgrade, so let me know if anyone had any clue on this ...
Thanks

Hi Martin,
Thanks for reply.
The assumption what you made are correct, but these are the possible reasons only. Is there any specific note or any info from sap that these changes came due to the new release change, so that i can tell my manager clearly.
And I am not sure whether this is impacting the reports which using the VirtualProviders (Virtual CUBE) in place. If you could get bit more information that will be helpful...Thanks in advance.
Sridhar

My ellipsis 7 has an issue after i got the latest upgrade...

my tablet turns itself off and reboots by itself, i did a factory reset of the tablet and it quit resetting itself for about a month, now it started back resetting itself has anyone had this issue it happened only after the upgrade.
on a side note when will the android 4.4.1 or 4.4.2 come out for this tablet maybe that will fix this thing

We'll unconver this mystery and get your tablet running smoothly again jcanderson252! Has there been any other changes to the device outside of the software? Try running the device in Safe Mode to see if an app is causing the trouble. http://vz.to/1i5MrJM
AshleyS_VZW
Follow us on Twitter @VZWSupport

**Issues after OS 10.6.6 upgrade**

Hi,
Hopefully I'm in the right place!
Spec: Macbook 2006, 2GB RAM, 320gb HD, OS 10.6.6, Boot Camp (Win 7)
2 problems:
1) After the update to OS 10.6.6 and the purchase of Iphoto 11 from the App store, I have been unable to open Iphoto, unless I unmount the boot camp partition. I have tuxera NTFS installed, which allows me to mount the Windows 7 parition on OSX. I've tried to uninstall this from system preferences, but have struggled to get the website uninstall instructions to work. Is there a way I can stop the Windows partition mounting through the OS? Or is there another fix to this annoying iphoto issue.
ps. I've done a bit of research, and found info about removing the windows partition from spotlight search, but this hasn't worked.
2) Ever since 10.6.6 update, time machine hasn't worked. It either says 'calculating changes' for hours or it starts to exclude 1000's of items from the backup. I've tried a full reset of time machine, but that doesn't work.
Thankyou for any information
Fraser

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Modes issue after nvidia 302.17 driver upgrade

I use a laptop with a nVidia GeForce 8400M GS video card.
Long time ago (290.xx drivers) I used to add custom modes (from modelines obtained with cvt) with xrandr.
Then I wasn't able to do that anymore and some display modes vanished from "xrandr -q" list, plus tty broke (but it's stated to be an upstream bug).
With 302.17 drivers I have only native mode:
$ xrandr
Screen 0: minimum 8 x 8, current 1440 x 900, maximum 8192 x 8192
VGA-0 disconnected (normal left inverted right x axis y axis)
TV-0 disconnected (normal left inverted right x axis y axis)
LVDS-0 connected 1440x900+0+0 (normal left inverted right x axis y axis) 367mm x 230mm
1440x900 59.9*+
DVI-I-0 disconnected (normal left inverted right x axis y axis)
when I try so set a custom mode i get:
$ cvt 1440 900 60
# 1440x900 59.89 Hz (CVT 1.30MA) hsync: 55.93 kHz; pclk: 106.50 MHz
Modeline "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync
$ xrandr --newmode "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync
$ xrandr
Screen 0: minimum 8 x 8, current 1440 x 900, maximum 8192 x 8192
VGA-0 disconnected (normal left inverted right x axis y axis)
TV-0 disconnected (normal left inverted right x axis y axis)
LVDS-0 connected 1440x900+0+0 (normal left inverted right x axis y axis) 367mm x 230mm
1440x900 59.9*+
DVI-I-0 disconnected (normal left inverted right x axis y axis)
1440x900_60.00 (0x262) 106.5MHz
h: width 1440 start 1528 end 1672 total 1904 skew 0 clock 55.9KHz
v: height 900 start 903 end 909 total 934 clock 59.9Hz
$ xrandr --addmode LVDS-0 "1440x900_60.00"
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 153 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 29
Current serial number in output stream: 30
Btw I already tried EDID override... (which resulted in a blank -black-, flickering screen no matter what custom modeline I put)
PS: I used 1440x900 to demonstrate that even if it's automatically set, it isn't recognized.

well, thanks, I actually didn't check the changelog...
I tried setting Metamodes (btw is usage that "simple" or I missed something?):
Option "MetaModes" "1440x900; 1280x800; 1152x720; 1024x640; 768x480; 576x360; 1024x768; 800x600; 640x480; 480x360"
but also that didn't work:
[ 4158.743] (II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 18:39:24 PDT 2012
[ 4158.743] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4158.747] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
[ 4158.747] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4158.747] (==) NVIDIA(0): RGB weight 888
[ 4158.747] (==) NVIDIA(0): Default visual is TrueColor
[ 4158.747] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4158.747] (**) NVIDIA(0): Option "NoLogo"
[ 4158.747] (**) NVIDIA(0): Option "TripleBuffer"
[ 4158.747] (**) NVIDIA(0): Option "OnDemandVBlankInterrupts"
[ 4158.747] (**) NVIDIA(0): Option "MetaModes" "1440x900; 1280x800; 1152x720; 1024x640; 768x480; 576x360; 1024x768; 800x600; 640x480; 480x360"
[ 4158.747] (**) NVIDIA(0): Enabling 2D acceleration
[ 4160.423] (II) NVIDIA(GPU-0): Display (LPL (DFP-0)) does not support NVIDIA 3D Vision
[ 4160.424] (II) NVIDIA(GPU-0): stereo.
[ 4160.429] (II) NVIDIA(0): NVIDIA GPU GeForce 8400M GS (G86M) at PCI:1:0:0 (GPU-0)
[ 4160.429] (--) NVIDIA(0): Memory: 524288 kBytes
[ 4160.429] (--) NVIDIA(0): VideoBIOS: 60.86.51.00.42
[ 4160.429] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 4160.429] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 4160.433] (--) NVIDIA(0): Valid display device(s) on GeForce 8400M GS at PCI:1:0:0
[ 4160.433] (--) NVIDIA(0): CRT-0
[ 4160.433] (--) NVIDIA(0): TV-0
[ 4160.434] (--) NVIDIA(0): LPL (DFP-0) (connected)
[ 4160.434] (--) NVIDIA(0): DFP-1
[ 4160.434] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 4160.434] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 4160.434] (--) NVIDIA(0): TV encoder: (null)
[ 4160.434] (--) NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock
[ 4160.434] (--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
[ 4160.434] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 4160.434] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 4160.434] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4160.434] (**) NVIDIA(0): device LPL (DFP-0) (Using EDID frequencies has been
[ 4160.434] (**) NVIDIA(0): enabled on all display devices.)
[ 4160.434] (WW) NVIDIA(0): No valid modes for "1280x800"; removing.
[ 4160.435] (WW) NVIDIA(0): No valid modes for "1152x720"; removing.
[ 4160.435] (WW) NVIDIA(0): No valid modes for "1024x640"; removing.
[ 4160.435] (WW) NVIDIA(0): No valid modes for "768x480"; removing.
[ 4160.435] (WW) NVIDIA(0): No valid modes for "576x360"; removing.
[ 4160.435] (WW) NVIDIA(0): No valid modes for "1024x768"; removing.
[ 4160.435] (WW) NVIDIA(0): No valid modes for "800x600"; removing.
[ 4160.435] (WW) NVIDIA(0): No valid modes for "640x480"; removing.
[ 4160.435] (WW) NVIDIA(0): No valid modes for "480x360"; removing.
[ 4160.435] (II) NVIDIA(0): Validated modes:
[ 4160.435] (II) NVIDIA(0): "1440x900"
[ 4160.435] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 4160.439] (--) NVIDIA(0): DPI set to (98, 99); computed from "UseEdidDpi" X config
[ 4160.439] (--) NVIDIA(0): option
[ 4160.439] (--) Depth 24 pixmap format is 32 bpp
[ 4160.439] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 4160.455] (II) NVIDIA(0): Setting mode "1440x900"
[ 4160.734] (II) Loading extension NV-GLX
[ 4160.759] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 4160.759] (==) NVIDIA(0): Backing store disabled
[ 4160.759] (==) NVIDIA(0): Silken mouse enabled
[ 4160.760] (**) NVIDIA(0): DPMS enabled
I'll wait miracles on 304.xx drivers (:arr: if only nouveau was a little more fast... I play only a 11 years old 2D fighting game and with nouveau it doesn't reach 60fps)
Last edited by smilzoboboz (2012-06-20 09:56:37)

Exporting issues after 4.2 upgrade

Has anyone else experienced exporting issues after installing the 4.2 upgrade? It used to be a breeze but now I keep getting the message that a destination folder has not been specified even though I've done that. Any feedback would be greatly appreciated! Thank you.

Are you using an Export preset, or setting the Export up manually each time?

Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home. Any suggestions on where to look to fix this?

Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home. Any ideas on how to fix this?

That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

Airplay issues after IOS 8 upgrade

After the latest IOS 8 upgrade I have a lot of issues.
Both my ipad and iphone are upgraded to IOS8 and after that I can't stream video to my apple tv, you can see that airplay is tries to connect to my apple tv but returns to the ipad/iphone screen after ~5 seconds. Besides of that both devices also have streaming difficulties to my B&W a7 speaker, problem with this one is that it will stop after 15 minutes and to get is working I have to restart the device.
With IOS 7 I didn't have problems at all.
Do others also have this many problems and what can I do about it?
I already tried:
- Restart ipad/iphone
- Closed all active programs via the home button
- Power cycled apple tv / remote speaker
- Reset ipad/iphone (power + home button)
- Re-install all related apps (remote, B&W, video streaming apps)
- Reconnected to my home network
Since I didn't have a problem before the upgrade and this occured on 2 devices after the IOS 8 upgrade, I would say this must be related to the upgrade.
Hope someone can give me an advice.

I was able to recover my voice memos, though the original titles are gone.
I opened my Voice Memos app like everyone else and I saw each memo quickly deleting and acting glitchy. I then connected my iPhone to my macbook so I could attempt to restore the backup I had made before the ios8 update. It said it couldn't be done because there wasn't enough room. However, when I opened my memos app again, the voice recordings were there! I can't verify if it's all of them but I'm grateful I was able to recover some.
I use this app to record lyrics on the go and I'd really like Apple to step up and fix this.

[Solved]Dell XPS13 ultrabook Xorg and Wifi issues after Kernel upgrade

I installed Arch on a Dell XPS 13 Ultrabook today, and most everything ran fine after I ran the initial upgrade -- but I held back on the kernel update from 3.1.3 to 3.3.7.
I just now updated the kernel, and now I can't start X, nor can I access the wireless card. For X, I get a "Fatal server error: no screens found" error, and I can no longer find wlan0 with iwconfig, although I can still see it with lspci.
I even tried downgrading the kernel to 3.1.9, but I'm still having identical issues.
What can I do to fix this, short of starting again from scratch?
Last edited by hksmoothie (2012-05-30 17:57:56)

Edit: Solved by copying all the files in the boot folder on my root partition (sda3) to my real boot partition (sda1).

Authorization issue after the Support packs upgrade

We're having problem on authorization issue after the SP upgrade.
One issue if "You are not authorized to call up line item display" using FCH1 and FS10N tcodes.
And the SU53 showing problem on S_TCODE FAGLL03.
How are we going to solve this issue? We dont want to add this missing auth object on all our finance roles.
Thank you in advance.

How can i send you the trace file? What is your email address?
If I were you, I won't do that. Did you not ever sign some confidentiality agreement? I wonder.
Anyhoo... (copy right @ David)
What are the objects been caught in category RC=4, RC=12?
Relate them with functional aspect of the transaction (error screen)
Edited : You can paste RC=4, RC=12 objects here without customer specific value if you want to.
Regards,
Arpan Paik
Edited by: P Arpan on Aug 23, 2011 2:36 PM

WiFi issue after 6.1.2 upgrade

I upgraded my OS to 6.1.2 and now I'm having troubles connecting to the internet at work. I did reset my network settings and inputted the appropriate password and still having issues. It identifies the network but when open safari or an app requiring internet connection it goes nowhere. Is anyone else having this issue. Does anyone know how to fix this problem. Keep in mind my connection works fine at home.

Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Lumia 1520 Battery Discharge Issue After Updating ...

After updating to Denim, my Nokia Lumia 1520 started to experience the following symptoms:
Phone charges to 100%, I disconnect and use an app like Instagram BETA, Internet Explorer, Lumia Camera, or any game--after no more than 5 minutes of use, the phone gives a "Critical Low Battery" alert and shuts down. If I try to restart phone immediately, it makes it to the AT&T splash screen or lockscreen and then same battery message appears and shuts down. If I wait 10-15 minutes after the shutdown to restart phone (without recharging) the phone will stay on, but battery level will report to be in the low 20s or 10s (whereas no more than 20 minutes ago, it was 100%).
When phone is at 100% battery: I take 2-5 photos or record mere seconds of video and I get the same "Critical Low Battery" alert. Upon restarting, some of the photos or video are nonexistent or corrupt files and battery level is reported at 2-5%.
However, if my phone is plugged in to charger, none of these "Critical Low Battery" alerts come up and I am able to use phone as usual. Considering that I cannot take a vacation and capture nature's beauty with an AC adapter always connected, this is a serious drawback.
Steps I've Taken:
Soft-reset
Full factory-reset
Moved all apps off microSD card (this improved situation maybe 5%)
Disabled almost all background app use in Battery Saver
Replaced microSD card when I thought this was a memory write/read issue
Installed "Battery" app to monitor battery use. After 750 data points were logged, my average battery life is reported at "16 minutes," which sounds about right.
My warranty should be expired since I purchased the phone December 2013, so I'm checking in here if anybody has had any luck with battery replacements or with a solution to this issue? At the same time, this issue arose strictly after updating to Denim and I've seen other users report this EXACT scenario. Is there any hope for Lumia 1520 users on this?
Other reported cases:
Battery Issue after Denim update: http://forums.windowscentral.com/nokia-lumia-1520/347112-battery-issue-after-denim-update.html
Battery critically low and shutdown: http://forums.windowscentral.com/nokia-lumia-1520/342343-battery-critically-low-shutdown.html

Hi albertico, TeJazz, and Samgh. Welcome to the Microsoft Mobile Community. We understand your situation and in response to this issue, we suggest that you perform the suggestions in the photo attached. If the issue persists, we recommend recovering your phone's software using the Windows Phone Recovery Tool. This link will work regardless of your location. If the same thing happens, it's best to take your phone to the nearest Care Point in your area for evaluation. Backup first to avoid data loss.
Attachments:
Battery drains fast.JPG ‏147 KB

Issue After Rating setting is enabled to the Discussion Board List in SharePoint 2013.

Hi ,
We are facing issues After Rating field is added to the Discussion Board List in SharePoint 2013. We are getting below error while adding a new item or editing a new item. Did anyone got this issue earlier and any solution for this.
Ashish Kumar Baranwal

Users which were getting issues actually getting below error:
[COMException (0x81020014): One or more field types are not installed properly. Go to the list settings
page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>]
Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String
bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames,
Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter
pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +0
Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName,
Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames,
Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter
pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +565
[SPException: One or more field types are not installed properly. Go to the list settings page to delete
these fields.]
Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) +146
Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName,
Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames,
Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration, Boolean bPublish, String bstrFil
Ashish Kumar Baranwal

Issue After Rating field is added to the Discussion Board List in SharePoint 2013

Hi ,
We are facing issues After Rating field is added to the Discussion Board List in SharePoint 2013. We are getting below error while adding a new item or editing a new item. Please help on this.
Ashish Kumar Baranwal

Users which were getting issues actually getting below error:
[COMException (0x81020014): One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>]
Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID,
String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress,
Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +0
Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String&
pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration,
Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +565
[SPException: One or more field types are not installed properly. Go to the list settings page to delete these fields.]
Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) +146
Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String&
pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration,
Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +2336
Ashish Kumar Baranwal

IPhone syncing issues after iTunes upgrade

Hi
I just upgraded to iTunes 8.1.1 for Mac. During the install I got a kernel panic and had to restart. iTunes seems to be installed fine. When I connect my iPhone I get messages like "some content will not be copied to the iPhone as this computer is not authorized" or such like. So now several apps, videos and music has been wiped from the iPhone.
I tried authorizing the computer but I just get "This computer is already authorized".
there does not seem to be any particular link between the erased content. Some was purchased on the Mac and some on the iPhone, all from the iTunes store. Before I updated iTunes everything synced fine.
I can d/l the apps again direct to the iPhone but I can't find a way to get the missing music and videos back on the iPhone. Very annoying.
Would re-installing iTunes help?
Any ideas?
Thanks
Chris

Hi Chris,
Try highlighting the one of the songs that will not sync in iTunes> cilck File> Get Info, check the account name and verifying you are authorizing the computer with correct account.
If the issue persists, try removing the SC Info folder as shown here: http://support.apple.com/kb/TS1389
If you still see the issue after removing the SC Info folder, try reinstalling iTunes as shown here: http://support.apple.com/kb/HT1224
-Jason

Mta - poa communcation issues after 8.0.1 hp1 upgrade

Similar Messages

Maybe you are looking for