MTA Unknown Status - Not Listening
Recently we installed GroupWise monitor on the same server as the MTA.
When I go to view the monitor webpage all the components (pos, gwia, webacc) all show green and happy, but the MTA shows the "Not Listening" status. Here's the fun part.
When monitoring the MTA using the MTA console everything looks fine.
However, when you click on the "Not Listening" link in GroupWise monitor it shows the MTA's address as the old Netware server's address that we migrated from. Hence the "Not Listening" status. Not sure why the old address is showing. I've looked all through the startup files for the post offices, MTA, GWIA and Webacc for anything that might reference the old MTA's ip address, but couldn't find anything.
It's really not a big deal since we can monitor it via the MTA's console, but it would be nice to have it available in the GroupWise monitor page so we can set traps, notifications, etc, etc.
Is there anyway I can fix this?
I will attempt to make a backup of the main DB and then rebuild it and then the POAs afterwards and see if that fixes anything. On another note... do you think that bad link information in the databases could be causing the post offices and webmail agents to just randomly quit once or twice daily. We've been having this issue since we upgraded to GW8. It may be another issue completely. Just curious what your thoughts were.
Originally Posted by aaronm04
I think this is your problem. It appears that somewhere in one of your GW domain databases, the old address still exists. If your POA won't connect w/o that switch, then the bad IP info is coming from the GW DB. If you find that and fix it, I would think GWMonitor would follow suit.
Is this your primary domain? Is it the parent of the GWMonitor object/app? If you have multiple domains, connect ConsoleOne to each one and verify the IP of the object in the MTA (not domain) properties. You might even consider a rebuild of the domain. If the child POs still don't connect w/o that switch (after you've verified the correct address in the MTA), you might consider rebuilding them too. They either aren't getting the updated info from the domain or the domain doesn't have the right info to begin with.
Report back what you find.
Aaron
Similar Messages
-
I started a support case with Microsoft to help me with raising the our domain Forest level because i received a message stating that there were Windows 2000 PDC still listed in the database. These PDCs were removed years ago. The tech saw all of the problems
i was having with domain replication so that is where he started. running the MS PortQryUI shows that ports 3268 and 3269 are not listening, (TCP port 3268 (unknown service): NOT LISTENING) when run FROM a Child domain controller against the Parent
Domain controller. Between the 2 Child domain controllers these ports are listening.
The Windows firewall is not running on any of the controllers, i removed a virus protect client from all of the servers, although i didn't enable the firewall there either, but these ports are still not listening on the Parent DC.
I need help debugging this. I am not very familiar with network sniffers so if i need to run one i'll need some guidance. This DC only has one NIC, all IP addresses are static, all servers are setup like this. All servers are in the same subnet, on the same
lan, on the same cisco switch, there shouldn't be anything blocking this port from starting.
I looked over other post that show this same problem, but they don't give a solution. If i am not using the Windows firewall why wouldn't these ports be open?
Any ideas? web searches are all over the map on trying to find the reason for this.
BobbyTry running the below command on the DCs that you think have the ports blocked or all the DCs.
netdiag /test:ipsec /debug > c:\dcname-ipseclog.log
Open that from the C drive and see if there is anything saying block or filters.
Also, just for kicks have you disabled the firewall service on the DCs?
And just for kicks have you tried enabling firewalls ports on all the DCs? The KB is below
http://support.microsoft.com/kb/555381/en-us
Step 1 - netdiag results
Step 2 - disable the firewall service on all DCs if step 1 was negative
Step 3 - enable the firewalls on all DCs per KB 555381 if step 2 doesn't work
Let us know how it goes!
If it answered your question, remember to “Mark as Answer”.
If you found this post helpful, please “Vote as Helpful”.
Postings are provided “AS IS” with no warranties, and confers no rights.
Active Directory: Ultimate Reading Collection -
I'm not sure when this started (it might have been when I did an security patch upgrade recently) but when I bring up the GroupWise Monitor it shows that MTA is "Not Listening".
It appears that everything is working so I don't want to break something else in order to "fix" this issue.
The POA and GWIA have SNMP enabled and I can get to those screens just fine.
However, I see through the log file that SNMP is not enabled for MTA, (SNMP Disabled).
I see in some documentation to edit the snmpd.conf file (I found it in /etc/snmp) and add:
dlmod Gwsnmp /opt/novell/groupwise/agents/lib/libgwsnmp.so
But, if the POA and GWIA have SNMP enabled, why isn't MTA.
Can I add that line with out breaking the POA and GWIA?
Confuser than usual...I can't get into the MTA web interface either (https://ip.of.mta:7180). I get an SSL connection error, which I hadn't gotten before. Nothing has changed with respect to settings in iMonitor or ConsoleOne, so I am unsure why this is happening. I noticed this first before I went into the GroupWise Monitor. I've looked over the MTA Object's configuration in ConsoleOne and I see the Certificate file and SSL Key file settings haven't changed and I located them in the directory where they should be. When I look at the log files for the MTA it looks to operating as it should <whew>. I just can't get to it. When I do a status of the GroupWise agents (rcgrpwise status) everything appears OK or if I do a restart the agents stop and restart as normal.
-
Intermittant "Unknown Status" for POA and MTA
Hello,
I'm getting intermittent "Unknown Status" in my GroupWise monitor for both my MTA and POA for a certain location. When I check the console for these two agents, they look just fine...
The box running GroupWise monitor is on the same physical location as the MTA and POA that is having the issue.
All of my other MTA and POA's at our primary remote location are just fine.
I've already verified that the SNMP strings are correct - they are identical to the working MTAs and POAs...
If there isn't a way to repair this issue, could someone please come up with a way from preventing "Unknown Status" messages from making it to my inbox? I've already tweaked the "Minimum Threshold level for notiifcation" to critical, yet it continues to "SPAM" me with "Unknown Status" messages...
If there isn't a way to "tune it out" of monitor, then I guess I'll just go ahead and make a rule in my GroupWise client to "move to trash" any "unknown status" messages... At least that will allow me to see any notifications of real problems...
Thanks! :)wspotkaeff,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Listener not listening instance
hi,
I am strange why listener is not listening instance
listener and instance are up
anyone could help me??
I can give you more details as you need
[oracle@fsze88linux ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 19-DEC-2009 18:03:35
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
Start Date 19-DEC-2009 17:52:08
Uptime 0 days 0 hr. 11 min. 27 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/fsze88linux/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Services Summary...
Service "test123" has 1 instance(s).
Instance "test123", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@fsze88linux ~]$
[oracle@fsze88linux ~]$ export ORACLE_SID=test123
[oracle@fsze88linux ~]$ sqlplus / as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Sat Dec 19 18:06:42 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to an idle instance.
SQL> select instance_name, version, host_name, status
, database_status, to_char(startup_time,'DD-MON-YYYY HH:MI:SS') strtd
from v$instance; 2 3
INSTANCE VERSION HOSTNAME STATUS DATABASE_STATUS STARTED
test123 11.1.0.6.0 fsze88linux.wor OPEN ACTIVE 19-12?-2009 06:09:47
kgroupPaul M. ,
I feel this question is still not solved.
content of listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = test123)
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = test123)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
)tnsnames.ora
TEST123 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = test123)
)yes, I can login that database test123. But lsnrctl status is UNKOWN.
[oracle@fsze88linux ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 19-DEC-2009 23:14:15
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
Start Date 19-DEC-2009 23:11:54
Uptime 0 days 0 hr. 2 min. 21 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/fsze88linux/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Services Summary...
Service "test123" has 1 instance(s).
Instance "test123", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfullyis that cause of static pointing to that instance test123?
But why dynamic pointing is not work....
I feel very confused....
help help.... -
Sles poa not listening on default ports
we dbcopied the domain and post office from netware 6.5.8 to sles 10 spk2, gw7.0.3.
installed mta, poa and gwia... the poa starts but is not listening on ports 1677, 7181 or 7101 all default ports.
all 3 agents are running on the host... these ports are not being used by any other service....
any ideas... or has any seen this....* waketech,
firewall is down?
Uwe
Novell Knowledge Partner (NKP)
Please don't send me support related e-mail unless I ask you to do so. -
GWIA "not listening" in GroupWise Monitor
When I check my GW Monitor to check the status of GroupWise, I see that the
GWIA is listed as "Not Listening". Mail is coming and going through the
GWIA (as evidenced by this message).
The problem appeared after a power outage that went on long enough for the
UPS to shut down servers. Wehn I restarted them This problem appeared. I
am running GW 8.0.2 on OES2 sp2 (linux). I also have GWAVA 4.5 running on
the same box.
I am assuming that it has to do with settings in the monitor? The log says
the GWIA is not running. When I try and go to
http://myserver-ip-address:9850 I get an "unable to connect" error.
What am I missing?
Thanks in advance!Daniel,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Internal Order: Interface trip stop: ERROR: unknown status = ''
Hello,
I have completed the setups for Internal orders:(the two orgs are within the same Operating unit, transfer method: direct)
I am able to
1. Create internal requisition
2. Import Order
3. Book, Pick Release and Submit ship confirm
Now, the interface trip stop ( the inventory interface part) The status changes to shipped in Shipping transactions.
The log file does not have an explicit error message. Posting truncated error message below. In more than one place, the following
vague error messages appear.
ERROR: unknown status = ''
X_MASTER_STATUS ==> ERROR
"Calling program unit WSH_DSNO.SUBMIT_TRIP_STOP
Entering WSH_DSNO.SUBMIT_TRIP_STOP () (09/27/2006 09:11:09 PM)
P_TRIP_STOP_ID ==> 4677
PROCESSING DSNO IN TRIP STOP 4677
RLM INSTALLED: YES
Calling program unit RLM_TPA_SV.UPDATECUMKEY
CHECKING EDI INSTALLATION STATUS
EDI INSTALLED: YES
DSNO PROFILE: ENABLED
No Eligible Delivery for the DSNO
Terminating program
INTERFACETRIPSTOP: RESULT OF DSNO SUBMISSION FOR STOP_ID 4677 =
Entering WSH_SHIP_CONFIRM_ACTIONS.UPDATE_COMPLETION_STATUS (WSHDDSHB.pls 115.310.11510.3) (09/27/2006 09:11:10 PM)
p_num_stops ==> 1
p_batch_id ==> is NULL
X_MASTER_STATUS ==> NORMAL
P_API_STATUS ==>
X_NORMAL_COUNT ==> 0
X_WARNING_COUNT ==> 0
X_INTERFACED_COUNT ==> 0
ERROR: unknown status = ''
X_MASTER_STATUS ==> ERROR
P_API_STATUS ==>
X_NORMAL_COUNT ==> 0
X_WARNING_COUNT ==> 0
X_INTERFACED_COUNT ==> 0
Exiting WSH_SHIP_CONFIRM_ACTIONS.UPDATE_COMPLETION_STATUS (09/27/2006 09:11:10 PM, .01 seconds)
l_api_completion_status ==> INTERFACED
l_previous_interface ==> TRUE
Your help is greatly appreciated.
Thank You,
Somnath SubramanyamHi somnath,
U have enabled the DSNO (departure Ship notice outbound) in the profile option
ECE_DSNO_ENABLED = yes. (through your log file)
You go to e-commerce gateway responsibility --> go to setup --> profile option --> query this profile option and Change to no and then try again.
Regards,
Prasad -
CJS-30149 ABAP processes of instance ISP/DVEBMGS00 [ABAP: UNKNOWN] did not
Hi All,
I'm installing ECC6 sr3 on DB2.My OS is Win2003 Ent Edition.The installation is on a cluster.While installing SAP i'm facing a error at phase 47 which states CJS-30149 ABAP processes of instance ISP/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:00 Mins Giving up.I've provided the dev_rfc.trc file below
>TS> Thu Jan 22 11:09:04 2009
T:204 Error in program 'igsmux': ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ISP, GWHOST=SAPPROD, GWSERV=3300
LOCATION CPIC (TCP/IP) on local host
ERROR partner 'SAPPROD:3300' not reached
TIME Thu Jan 22 11:09:04 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2770
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 777
dev_disp
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ISP
systemid 561 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 5052
Wed Jan 21 22:00:25 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5052) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Jan 21 22:00:30 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAPPROD_ISP_00 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000185B0050, size: 6348592)
DpShMCreate: allocated sys_adm at 00000000185B0050
DpShMCreate: allocated wp_adm at 00000000185B2150
DpShMCreate: allocated tm_adm_list at 00000000185B83A0
DpShMCreate: allocated tm_adm at 00000000185B8400
DpShMCreate: allocated wp_ca_adm at 0000000018B1C2A0
DpShMCreate: allocated appc_ca_adm at 0000000018B22060
DpShMCreate: allocated comm_adm at 0000000018B23FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000018BAAC30
DpShMCreate: allocated gw_adm at 0000000018BAACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0000000018BAACE0
DpShMCreate: allocated wall_adm at 0000000018BAACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
ERROR => <EsNT> CreateFileMapping name=ES_SEG_00_007 error=1455 [esnti.c 1184]
ERROR => <EsNT> paging file too small for 2044 MB mapfile [esnti.c 1186]
Memory diagnostic *
Systeminformation
Processor-Typ : Processor-Count : 4
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 2
NT Pagefile Informations
Config. minimum size : 52426752 K
Config. maximum size : 55570432 K
Avail. maximum size : 55570432 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
2095104 K
4190208 K
4190208 K
2476072 K
2
h:\pagefile.sys
50331648 K
51380224 K
51380224 K
51380224 K
NT Task Manager Informations
Total Handles : 66
Total Threads : 0
Total Processes : 123823424
Commit Charge Total : 6619245 K
Commit Charge Limit : 1548 K
Commit Charge Peak : 0 K
Phys.Memory Total : 3538996 K
Phys.Memory Available : 0 K
File Cache : 123823424 K
Kernel Memory Total : 0 K
Kernel Memory Paged : 48 K
Kernel Memory Nonpaged : 0 K
Memory usage of current process
Total virt.address space : 0000007499415424 K
Avail.virt.address space : 0000007498310960 K
Private Pages : 0 K
Total heap size : 21337 K
Virtual memory regions : 0 K
Uncommitted heap memory : 13208 K
Allocated heap memory : 6546 K
Moveable heap memory : 605 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
4380
msg_server.EXE
[MS] ISP_01
15832 K
15832 K
12344 K
12344 K
1
4032
enserver.EXE
[**] ISP_01
25592 K
25592 K
56632 K
56640 K
3
5636
sapstartsrv.exe
28664 K
28664 K
18712 K
18712 K
4
6036
msg_server.EXE
[MS] ISP_00
16072 K
16072 K
12736 K
12744 K
2
5052
disp+work.EXE
51568 K
51664 K
190464 K
241904 K
6
276
igswd.EXE
[**] ISP_00
7120 K
7344 K
2640 K
3000 K
0
4272
igsmux.exe
20304 K
20304 K
17632 K
17632 K
2
3272
igspw.exe
6328 K
6328 K
3448 K
3448 K
0
988
igspw.exe
6328 K
6328 K
3448 K
3448 K
0
Sum
177808 K
318056 K
Error 11 while initializing OS dependent part.
ERROR => DpEmInit: EmInit (1) [dpxxdisp.c 9634]
ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c 9561]
DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jan 21 22:00:40 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Jan 21 16:30:40 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
8 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
9 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
10 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
11 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
12 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
13 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
14 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
15 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
16 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Wed Jan 21 16:30:40 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Wed Jan 21 16:30:40 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Jan 21 16:30:40 2009
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jan 21 22:00:45 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPPROD_ISP_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5052) [dpxxdisp.c 10421]
Good Bye .....
One more issue is that when i try to move my cluster from active to passive node the shared folders /sapmnt,saploc and db2dumps disappears and even after restoring the cluster to the active node i'm unable to see the shared folders.
Can anyone help me out in resolving this issue
Regards,
Raj
Edited by: Rajagopal Desikan on Jan 26, 2009 8:58 PM> *** ERROR => <EsNT> CreateFileMapping name=ES_SEG_00_007 error=1455 [esnti.c 1184]
> *** ERROR => <EsNT> paging file too small for 2044 MB mapfile [esnti.c 1186]
You did not meet the requirements necessary for a SAP installation, you pagefile is too small. Check the installation guide for necessary pagefile requirements.
Markus -
Systemd / services start but do not listen to interfaces
Hello,
In the course of migrating from initscripts to systemd (mixed systemd/sysvinit/initscripts), I am facing a strange behaviour with some services: squid, bind (named), dhcpd which start normally but do not listen to the useful interface. For instance, for named, netsat does not show 192.168.42.2:53 (which is is my LAN interface), despite the process is running (systemd status named). It seems that with systemd there is a change to the way available interfaces are reported to the services (for those services, I have not explicitly configured the interface to listen to).
If I revert back to initscripts only (removing init=/usr/lib/systemd/systemd from the kernel argument) everything is OK.
I am not running NetworkManager (relevant ?), my rc.conf is clean apart that I am still using the deprecated syntax (I need a bridge interface that NetworkManager cannot handle).
eth0="dhcp"
eth1="eth1 promisc"
br1="br1 192.168.42.2 netmask 255.255.255.0 broadcast 192.168.42.255"
INTERFACES=(eth0 eth1 br1)
Thanks for any help.mrechte wrote:
I found the cause of the problem: legacy network service starts too late, after some other network daemons which do not see yet the interfaces.
I switched to netcfg and dropped network.
Seems to be OK now.
Glad you found the problem. Would you please edit your first post and mark as "Solved" so others searching for this will see it? -
Connection Status: not Responding SCVMM '08
I just installed SCVMM 2008 on a Windows 2008 x64 server with Hyper-V RC0 Enabled. From the console on the server it says "Needs Attention" and when I double click on it, it says
Connection Status: Not Responding
Agent Version: Up to Date
Virtualization Status: Unknown
Virtualization Service Version: Up-to-Date
The firewall is turned on for public network only, and I can connect to manage that box with the hyper-v mmc snap-in for Vista. Why is SCVMM not connecting to it? I rebooted the server after install and still can't get it to work correctly. It sees my VMs on the server but I can't connect to them either.
Thanks,
ChrisI'm having very similar erros, I have read all posted blogs in this thread and followed all instructions with no luck.
This is what Im getting;
Error (2912)
An internal error has occurred trying to contact an agent on the virtualqa1.PFDOMAIN.prairiefyre.com server.
(Unknown error (0xc0000bbf))
Recommended Action
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
Connection Status: Not Responding
Agent Status: Responding
Agent Version: Up-to-Date
Virtualization service status: Running
Virtualization service version: Up-to-Date
I have already applied KB956589 and KB956774.
I did have a USB External Drive connected to the Host, which I have disconnected and have rebooted the host afterwards.
I have installed SCVMM 2008 RTM Server on my Host machine, which is the Hyper-V server.
I have also setup the SCVMM tracing according to the post in this thread. Here is what I see:
00027454 561.69750977 [2788] Ensure that the agent is installed and running. If the error persists, reboot virtualqa1.PFDOMAIN.prairiefyre.com and then try the operation again. ---> System.Runtime.InteropServices.COMException (0x80338000): The WS-Management service cannot process the request. The service cannot find the resource identified by the resource URI and selectors.
00027455 561.69750977 [2788] at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Get(Object resourceUri, Int32 flags)
00027456 561.69750977 [2788] at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(MyWSManResourceLocator resLocator, Type type)
00027457 561.69750977 [2788] --- End of inner exception stack trace ---
00027458 561.69750977 [2788] at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(COMException ce)
00027459 561.69750977 [2788] at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
00027460 561.69750977 [2788] at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(MyWSManResourceLocator resLocator, Type type)
00027461 561.69750977 [2788] at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(String url, Type type)
00027462 561.69750977 [2788] at Microsoft.Carmine.WSManWrappers.WSManRequest`1.Get(String url)
00027463 561.69750977 [2788] at Microsoft.Carmine.WSManWrappers.VirWSManRequest`1.Get(String url)
00027464 561.69750977 [2788] at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.GetSettings(WsmanAPIWrapper wrapper, String instanceID)
00027465 561.69750977 [2788] at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.get_ViridianVSSD()
00027466 561.69750977 [2788] at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.get_IsSnapshot()
00027467 561.69750977 [2788] at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.GetTimeOfLAstConfigurationChange(IVMComputerSystem vmComputer)
00027468 561.69750977 [2788] at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.IsHeavyRefresherNeeded(IVMComputerSystem vmComputer, Nullable`1& modTime)
00027469 561.69750977 [2788] at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateFullVMObjectToCarmine(IVMComputerSystem vmComputer, VMData vmData, UpdateRequired updateRequired, Boolean vmObjectHasChanged)
00027470 561.69750977 [2788] *** Carmine error was: HostAgentWSManObjectNotFound (2915); HR: 0x80338000
00027471 561.69750977 [2788] *** virtualqa1.PFDOMAIN.prairiefyre.com ** D:\Virtual VMC\MCC Server\2003 Server x86.vhd **
00027472 561.69763184 [2788] 0AE4.08A0::11/07-16:26:07.441#26:VmRefresher.cs(727): Caught an exception while refreshing VM 5.5 Server : a7760db6-c5c9-401e-add7-fd1c8c2fecd5. Refresher ID a4d42b32-55e5-49ff-a99d-28342a0d7008
00027473 561.69818115 [2788] 0AE4.08A0::11/07-16:26:07.441#26:VmRefresher.cs(727): Microsoft.Carmine.WSManWrappers.WSManProviderException: The WS-Management service cannot process the request. Object not found on the virtualqa1.PFDOMAIN.prairiefyre.com server.
00027474 561.69818115 [2788] Ensure that the agent is installed and running. If the error persists, reboot virtualqa1.PFDOMAIN.prairiefyre.com and then try the operation again. ---> System.Runtime.InteropServices.COMException (0x80338000): The WS-Management service cannot process the request. The service cannot find the resource identified by the resource URI and selectors.
00027475 561.69818115 [2788] at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Get(Object resourceUri, Int32 flags)
00027476 561.69818115 [2788] at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(MyWSManResourceLocator resLocator, Type type)
00027477 561.69818115 [2788] --- End of inner exception stack trace ---
00027478 561.69818115 [2788] at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(COMException ce)
00027479 561.69818115 [2788] at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
00027480 561.69818115 [2788] at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(MyWSManResourceLocator resLocator, Type type)
00027481 561.69818115 [2788] at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Get(String url, Type type)
00027482 561.69818115 [2788] at Microsoft.Carmine.WSManWrappers.WSManRequest`1.Get(String url)
00027483 561.69818115 [2788] at Microsoft.Carmine.WSManWrappers.VirWSManRequest`1.Get(String url)
00027484 561.69818115 [2788] at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.GetSettings(WsmanAPIWrapper wrapper, String instanceID)
00027485 561.69818115 [2788] at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.get_ViridianVSSD()
00027486 561.69818115 [2788] at Microsoft.Carmine.ViridianImplementation.VirVMComputerSystem.get_IsSnapshot()
00027487 561.69818115 [2788] at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.GetTimeOfLAstConfigurationChange(IVMComputerSystem vmComputer)
00027488 561.69818115 [2788] at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.IsHeavyRefresherNeeded(IVMComputerSystem vmComputer, Nullable`1& modTime)
00027489 561.69818115 [2788] at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateFullVMObjectToCarmine(IVMComputerSystem vmComputer, VMData vmData, UpdateRequired updateRequired, Boolean vmObjectHasChanged)
00027490 561.69818115 [2788] at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.RunFullRefresher()
00027491 561.69818115 [2788] *** Carmine error was: HostAgentWSManObjectNotFound (2915); HR: 0x80338000
00027492 561.69818115 [2788] *** virtualqa1.PFDOMAIN.prairiefyre.com ** D:\Virtual VMC\MCC Server\2003 Server x86.vhd ** -
I still have one gwia that is unknown status in monitor, other 5 gwias that
are configured the same are being monitored. What else can I check ?Tim,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Service Order status Not Changing From Resloved to Closed status
The service order Status not automatically moving from Resolved to closed after 30days.
Observation
We Revived program Z program ,seems to be fine.
I am set the program in debugging mode for testing the Service orders by reduce the time duraion for staus resolved to closed, am getting the getting the Error Test determination procedure is not evaluated .
Point of dout
1) Is there any relation between Test Determination Procedure and Z program.
2) while am checking for Text Customing for Consistency I found an error Log.
3) While creating Service Order Test field was Mandatory
for that have dout about is there any relation between for this program
Thanks in Advance
Regards
Raju.........Solved ...
BD75 (RBDMOIND ) is T-Code and report name ...
need to schedule ... -
I have an Ipod 5 and you can not listen to music unless you have headphone plugged in
I have an Ipod 5 and you can not listen to music unless you have headphones plugged in
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar -
Hi,
My iTunes is set to automatically update podcasts and keep the last five episodes of each podcast.
However, iTunes appears to stop updating podcasts after several (five?) unwatched episodes and gives me an exclamation mark in the podcast overview. Clicking on that, I get the message: "iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?"
This is not what I intend... and not what I told iTunes to do... (at least this my reading of the below settings)
This stopping is rather less then ideal: (1) if I am going away for two weeks, which I often do, I would still like to have the last five days of news, not the last five days of news back from the date I left, (2) I need to click update for approx. 20 podcast on regular basis, (3) my iPhone is synced to iTunes as soon as I come home, if iTunes does not have the podcasts downloaded, they are not copied over to the iPhone, and the iPhone will attempt to download the episodes via 3G next time I play the podcast on the go, (4) I am mainly using iTunes functions, such as smart playlists and podcasts, through another app (Plex, a fullscreen media player) and it is a pain to have to go to iTunes to manually do things. That is why this bothering me...
How can I get iTunes to behave as intended? (From reading through old posts I know that there is a Doug script adressing this problem, which I have just set up, but I would prefer to use internal settings if possible... maybe I am just missing a setting)
Thank you for your ideas!Thank you for the response, Roger!
OK, that's how it is then.
The iTunes podcasts settings should be reworded in that case because it suggest something different from what it does. And, of course, it would be ideal for Apple to make this more flexible and allow users to set up their podcast downloads in their way and not be so motherly (c'mon, Apple, your users are not as dumb as you think, and they have uncapped Internet connections these days anyway)...
Btw., for anyone interested, this is external script I am using now:
http://dougscripts.com/itunes/scripts/ss.php?sp=updateexpiredpodcasts
Including the "cron job" setup here:
http://dougscripts.com/itunes/2011/12/updated-update-expired-podcasts-v2-2-and-l aunchd-project/
Cannot tell how well it works because I have just set it up, other members of the forum say it works for them...
If anyone knows of in-app solutions, please share...
Maybe you are looking for
-
HT1689 How do I find the balance on a gift card?
I have agift card for the App Store but cannot seem to find where my balance is.
-
Queries regarding EIM/WIM v4.2.5 using in IPCCExpress 7.0(1) SR4 setup
Following are few point on which I need help.. 1. If a Chat task is assigned to an agent and he/she is not responding to the chat then this task has to be assigned to another available agent after 12 sec. From where this time is configurable? 2. If a
-
MS Outlook Calender Sync Failure
I cannot get my BB device to transfer my appoitments to MS Outlook Calender. Any ideas?
-
I developed a Flash file (SWF) with a light blue start button, placed it on a web server then went to the URL using Firefox (3.6.8). Later I updated the SWF (changed the button to dark blue), replaced the SWF on the web server, opened Firefox and use
-
How to start sap hcm process and forms in ess
Hi, Here is the requirement for us i.e., employee (Role SAP_ASR_EMPLOYEE) has to initiate the HCM Process and Forms in the ESS. But as per the standard the possibilities are initiated by the Mangers and HR Administrators... How to solve it... Regards