Mtab conflicts with filesytem - forgot to perform a manual config

Well I run into an old problem because I missed to configure arch after installing a new kernel through pacman.
My thread refers to : https://bbs.archlinux.org/viewtopic.php?id=132225
I personally forgot to do: "pacman -S filesystem --force" and in addition I deleted /etc/mtab. As a consequence pacman is broken, too.
Furtunally I made a backup and with a live linux system I can still acces all files on my arch.
Because of missing just the above mentioned step I pay the price, which is - you name it  - you guess it - you know it - "unmet dependencies with local file systems.
Me: "My file arch is broken after an kernel update"
You: "Remember, pacman is just a kiss not a maintaining system for noobs"
Me: "Well, I have tried to turn it off and on again"
You: "But this isn 't the problem"
Me: "My Arch isn't working"
You: "The problem is sitting infront of the computer"
Me: "... well what do you mean"
You: "Read the news on the front page...before you run pacman"
Me: "Looking at the constellation of the moon and the sun - you won the price dude !"
... well I messed it up and now my question is how can I fix my wrong doings - any ideas!
Last edited by l8star (2013-07-31 17:31:43)

mtab is just a symlink to /proc/sys/mounts these days.
$ ls -l /etc/mtab
lrwxrwxrwx 1 root root 17 May 31 11:40 /etc/mtab -> /proc/self/mounts
BTW, this is unnecessary:
l8star wrote:Me: "My file arch is broken after an kernel update"
You: "Rember, pacman is just a kiss not a maintaining system for noobs"
Me: "Well, I have tried to turn it off and on again"
You: "But this isn 't the problem"
Me: "My Arch isn't working"
You: "The proble is sitting infront of the computer"
Me: "... well what do you mean"
You: "Read the news on the front page...before you run pacman"
Me: "Looking at the constellation of the moon and the sun - you won the price dude !"

Similar Messages

  • Is anyone else having conflict with 10.8.2 update and audio files?

    I recently updated from 10.8.1 to 10.8.2 (big mistake).  Now my digital interface has all of these random clicks and pops.  Worse yet, when I try and play my audio files (Digital Performer) or ITUNES that music stops, starts, stutters and is basically unlistenable.  Before the update everything ran smoothly.  I talked with the tech support for my digital music application (Digital Performer) and he thinks there is a conflict with the latest Apple update too.  Is anyone else having these problems?
    To get back to 10.8.1 do I have to wipe the hard drive and re-install everything?  I use my Mac for music production so this is killing me.  Any ideas?

    I once again reloaded 10.8.2, all of the current firewire, USB, and printer drivers (why not make sure those are up to date too, what have I got to lose?).  Checked the cables, the Mac firewire ports etc.  No change.
    So I bought a cheap back up firewire drive (Western Digital, My Passport Studio-about $100).  That worked perfectly on the firewire port of my Mac Pro.
    I hooked up my MOTU 828 firewire audio interface into the Western Digital's second firewire port, and everything works perfectly.
    I wish I had known that daisey chaining devices would solve my problem before I spent $500 on a new firewire interface.
    If you are having similar problems with firewire connection, then try daisey chaining through a device that has no problems.  Who knew a solution could be so simple?

  • PP CS6 on Retina Macbook conflicts with YouTube/Pandora

    I bought my Retina Macbook recently, and the first thing I did was to install Premiere Pro CS6 on it. I did the hack - inserted GeForce GT 650M to the list - and enabled the Mercury Playback Engine.
    Ever since then, I've been having all sorts of problems, but the most annoying problem is that in the midst of editing, somehow Program Monitor would either freeze or black-out.
    I seriously tried every possible ways I could do to resolve this as an average user. I tried resetting the preferences, switching the drives, turning the machine on & off, and all the magic joojoos. None of them worked, until I found out the problem starts to happen as I open other applications along with the Premiere Pro opened.
    I began to wonder, does the graphic card or Premiere Pro CS6 conflict with any programs I have opened? So I tested it out.
    I found out that while having CS6 and Safari (or any kinds of web-browsing programs) on, the "crashes" occur very often. I also found out it typically happens when I turn on Pandora and YouTube.
    The moment I shut off the Pandora tab, YouTube tab, or even websites with any kinds of visual or audio media turned on, the freezing or black-out situation on the Program Monitor immediately stops. If turning off the tabs doesn't work, then quitting the program entirely solves the problem.
    From what I've tested, it's for sure to say Flash or Video Playback on webpages conflicts with GT650M card. It's certainly not the software problem, because when Software Only mode is turned on, all the images come back on the Project Monitor. I mean, what kind of weird conflict is this?
    Can anyone else with a Retina MacBook confirm this?
    In case if Anyone is wondering, this is the setup I've used.
    Retina Display Macbook Pro
    16GB Ram option
    256GB SSD option
    NVidia GT650M 1GB VRAM
    Video files in the SSD

    It's absolutely woeful.
    Like traveling back in time with modern software and putting it on last generation hardware... or two generations previous hardware.
    What floors me the most is that there's not any spikes or even utilisation of the CPU and GPU going on... I have CPU and GPU monitoriing software for the more beserk applications I use.  I checked them out when using Illustrator and Indesign.  The CPU and GPU is hardly getting tickled... so it's JUST poor software engineering at work.  VERY POOR software engineering.
    There's at least 90% of the CPU and GPU power completely unused during moving operations and object creation.  So it COULD be fast, and performant, if they cared to actually use the CPU and/or GPU more effectively/thoroughly when we want to DO something inside the software.
    I don't even know how you'd code something this woefully under performant.  You'd have to plan to do it, or be using MONO or some other uselessly single threaded, low priority frame work...
    Maybe these apps are programmed in Java

  • X-fi xtreme gamer fatal1ty conflict with Asus A8N SLI Premium Mobo with Nvidia nForce chip

    i have had my x-fi for a few months now and ever since installing it there have been constant system hiccups, blue-screens, and performance locku
    ps.
    my system was perfect running the audigy 2, but the x-fi is messing everything up.
    i have read about the conflicts with the nvidia chipsets and the x-fi drivers and have yet to find a solution. i love the quality of the sound from the card but i cant deal with these issues any longer and am going to return it if there is not some sort of solution.
    it seems this problem is well known and has been for quite some time, i cant understand why creative hasnt released a patch for the drivers of the card.
    if anyone has any suggestions for me i would really appreciate it so i dont have to yank the card out and return it to newegg.
    thanks very much.
    -Art

    In all seriousness, return the card. Do it NOW because you still have the chance to. Don't wait until it's too late.
    Then after that, if you are curious why I say that, do some searches about other issues everyone is having and Creative not being very responsi've.
    Search (either here or use Google for external websites) for "ha20x2k.sys" and "BSOD" (or a combination of both). "Crash" and "BF242" or even other games such as WoW and CoH - just be (pun not intended) creative.
    Don't be like the others here (like myself), who own a very expensi've paper weight. Sure you can continue to use it for listening to music, but that's like buying a sports car and just being able to use the stereo.Message Edited by naddie on 04-2-200706:54 AM

  • CS4 on XP with NVIDIA 8800GT - terrible performance

    I'm running CS4 on XP (Boot Camp on MAC) with an NVIDIA 8800GT 512mb. Performance is awful - constantly freezing during playback. The problem persists on After Effects as well. Meanwhile, the entire CS3 suite runs like a champ.
    I found Adobe's registry keys that correct an issue with this graphics card and Photoshop CS4 - but it was no help to Premiere or After Effects.
    I'm assuming this is a problem at the driver level but thought it was worth posting to see if anyone had found a solution.
    CS4 works rather well on my PC(only) workstation with an NVIDIA 8800GTS 320mb.
    Any ideas? I really think it's a graphics card issue, but let me know if you think I'm off track. Thanks.
    Mac Pro
    Dual Xenon Quad 3.2
    2Gigs Ram
    NVIDIA 8800GT 512
    CS3 Installed w/ all updates
    CS4 Installed w/ all updates

    Model
    ugnx-01
    proe-04
    catia-02
    3dsmax-04
    maya-02
    sw-01
    Adobe Test Render
    Core2Duo T7300 Geforce 8600 Gt
    5.07
    12.81
    14.13
    18.68
    27.08
    8.96
    4:18
    Core2 Extreme 9300 Quadro 3700M
    17.19
    33.66
    63.62
    56.49
    52.72
    84.03
    1:46
    8 X 3.2ghz Xeon W5580 Quadro CX
    17.48
    48.65
    52.95
    81.31
    91.99
    99.04
    1:06
    4 X 3.2ghz Core i7 965 Quadro CX
    27.26
    87.53
    96.38
    108.56
    210.73
    253.31
    0:52
    Thanks for the tool, this will come in handy. I will be sure to post the Core i7 965. Unfortunatly I no longer have the dual Xeon Core i7 computer as it was just for a review. Here's some SpecViewPerf10 benchmarks(2 threads) along with adobe primiere pro render times. Keep in mind the test render was not using the quadro render accelerator presets to make it more of a CPU benchmark. As you can clearly see, the single Core i7 computer greatly outperforms the Xeon computer. The xeon computer also had more ram, faster hard drives, expensive intel motherboard, all the most expensive things you could possibly put in a PC. The Core i7 computer was made with cheaper components. I tried multiple SpecViewPerf10 benchmarks with 1-8 threads and nomatter what the Core i7 965 would beat it. Took out one of the Xeon W5580 cores, same benchmarks. Disabled hyperthreading on the W5580, same benchmarks. The Xeon W5580 is still fast, it's just if you are paying $2k per processor you would expect that a single $1k processor would not be better.
    Also if you goto http://ppbm4.com/Benchmark.html. You can see your Core i7 920 beat out the Dual Xeon W5580 and W5590.
    I was not entirely sure whether you meant the XEON or the Quadro CX in your benchmark tests. Unfortunatly your test tool will not show the power of the Quadro CX. I am sure you are aware, to utilize the Quadro CX you have to use special presets from a plugin. If I used these in the test it wouldn't be a good comparsion tool. I will however give the test a shot and send my results. I see your computer is top currently
    In respect to the person previously. It is completly possible for a person who doesn't edit much to use Premiere Pro CS4 on Windows XP and not have a problem. It is also possible for a person to use Windows 95 and not have it crash. Does that make it a stable program still? Consider yourself one of the lucky ones. In a work environment where Premiere Pro is used on a daily basis it is considered unacceptable to have to redo a project once a week due to a bug. Windows 7 has less conflicts with Premiere Pro and therefore you should not use Windows XP. I had to put Windows 7 on all the video editors computers because they refused to use CS4 on Windows XP as it crashed too much.

  • Possible Xcelsius conflict with IPv6

    Xcelsius and IPv6:
    We ran into an interesting issue on a client site this past week. First time implementing an install on a Windows Server 2008.
    Environment:
    Win Svr 2008
    IIS 7
    Ipv6 & Ipv4 enabled
    BOE 3.1 w/ Xcelsius 2008
    The install went flawlessly with the ability to export objects/reports to the enterprise system, etc - with no problems. However, Xcelsius had issue with trying to connect to the CMS when trying to save/export to BOE 3.1 (and ONLY Xcelsius)
    We noticed they are running a NIC with IPv4 and IPv6 simultaneously (clearly listing a long hexidecimal IP address labeled IPV6 in IPCONFIG)
    So we went into the CMC/CMS properties and there is a box to manually enter an IPv4 and IPv6 IP address, respectively. If you try to enter addresses in both boxes, when you restart the CMS -- it will reset back to the default which automatically obtains the host. Therefore, we entered purely the IPv4 address and restarted the CMS.
    First issue resolved.  We were able to then hit Enterprise from Xcelsius... until you tried to save. Then it thought the Input FRS was down. So we had to perform the same step for the Input FRS and force it to a static IPv4 address of the server.
    Using the host name didn't work (that is the other option in the server properties for each service). I imagine you could play with the host file, but then you may have to do that for each client.
    In the end forcing the IPv4 address for the CMS and Input FRS properties did the trick, but it is strange because if you used the defaults -- the publishing wizard, for example, which hits the CMS and the Input FRS when importing objects -- didn't have a single problem. Only Xcelsius appears to conflict with IPv6.
    Thoughts? We would have figured it would use the same methods to connect to communicate with enterprise as Crystal Reports client, publishing wizard, etc. However, I did notice in SAP's IPv6 documentation on the Support Portal, that although 3.1 does handle IPv6 -- Desktop Intelligence still does not. Perhaps Xcelsius should be added to that list in the documentation?
    This is fine for a server with a static IP, but if for some reason their server is using a dynamic address and relying on the host DNS -- this could be an issue.
    Thoughts?

    HI,
    I've heard this problem before, but I haven't heard of a resolution.
    The NI's GPIB driver (NI-488.2) will not work with the Measurement Computing board. Not in LabVIEW 5 or 6. If you are using the GPIB VIs in LabVIEW 5 with the Measurement Computing board is because the MC driver replaced something.
    A device driver is a software component that requires detailed knowledge of the hardware it manages. NI's driver is written to control NI's GPIB hardware ONLY. The same applies to the MC driver.
    The driver also provides a Language interface, so that you can access the driver's functionality. To program in C, a driver will provide a header file with the function declarations and a dll (or static library). For LabVIEW the driver will provide the V
    Is. These VIs are provided by the driver and developed by the driver manufacturer. Most likely these VIs are wrappers for the dll function calls. This mechanism hasn't changed between versions of LabVIEW.
    You should contact Measurement Computing. They should be able to troubleshoot the problem, since they know what their driver installs.
    DiegoF
    National Instruments.

  • Verizon Quantum Gateway has conflict with Airport Express

    Does anyone have a problem with the Verizon Quantum Gateway in conflict with the Airport Express.

    ranamaska wrote:
    Can you tell me exactly how to do this?
    Or
    Should Verizon have this instruction for me to find?
    Just ignore the verizon.. it really should not be a major issue.
    If you are having problems fixing the channels in one router should then solve the problem by forcing the other router to use different channels.
    I cannot tell you how to fix the verizon anyway as I have no idea what it is nor can i get one to play with.
    Anyhow reset the Express to factory and start over.. the utility get it right most of the time.. and all you need to do is tweak the values.
    I strongly recommend you use all short names, no spaces and pure alphanumerics.. password the same but 8-20 characters.
    So do the setup with Express WAN port plugged into the LAN port of the Verizon router.
    When you are finished.. click on the Express in the airport utility and click on Edit.. I don't have an express but the setup is identical for my Time Capsule.
    When you click edit you will get the full manual setup.
    Looks like this.. first tab is Base Station where you set name and password.
    Go to the Network tab.. it must be bridged.
    Go to the Wireless Tab. And you must Create a wireless network..
    Down the bottom of that page is wireless options.. (sorry I cut it off in the screenshot).
    This allows you to set a different name for 5ghz.. up to you.. I prefer doing this but it is perfectly fine not to.
    At the bottom it shows wireless channels are set to automatic.
    Click that and fix it ..
    Here is my actual current setup.
    Once you complete this setup.. you can reboot the Verizon modem router.. that will give it a chance then to reset its wireless and you should then be able to clearly see what is happening..
    Use the tools apple has given you .. in Mac OS since Mountain Lion an excellent wireless survey program is built in.
    About Wireless Diagnostics - Apple Support
    Start the utility and do a scan and then you will see all the channels and signal levels you have available in the area.
    You can also check the performance of the link you are using.

  • GX633 - ENE CIR I/O conflict with Motherboard Resource

    Hello everyone...I'm a newbie here.
    I have MSi GX633 here with latest BIOS and official MSi driver (except VGA and Sound), running Windows 7 Professional x86.
    I've own my notebook for 2 year, and just found this yesterday.
    Recently found that my ENE CIR Reciever driver had conflict with Motherboard Resource...
    Iam opening Device Manager, and then when I check ENE CIR properties, on General tab it say "the device is working properly".
    But on the Resource tab it say "Input/Output Range 004C - 004F used by:  Motherboard resources".
    So I search Motherboard resource device on the System Device. It is hidden by default. Looks on the properties, on resource tab and found conflict message too.
    It said :
    Input/Output Range 0044 - 005F used by: ENE CIR Receiver
    Input/Output Range 0062 - 0063 used by: Microsoft ACPI-Compliant Embedded Controller
    Input/Output Range 0065 - 006F used by: Microsoft ACPI-Compliant Embedded Controller
    Any one share same problems here with your GX633 or another notebook with ENE CIR built in device???
    If one of you had already solve this bug, please share it...
    Thanks...
    NB: sorry about my bad spelling english language

    Quote from: Stu on 17-June-11, 01:35:02
    What 'MCE Remote' are you using, and can you define 'doesn't work' more clearly?
    ok, i can explain that. My friend had same notebook like mine. And he had a Microsoft remote control that work with his notebook. But it can't work on my notebook. I don't know about that remote's model/type/series, if that is what u ask. All i know is thats mce remote control.
    but. . .looks like it doesn't matter anymore right now.
    Ive got worse matter than this.
    yesterday i use my notebook to copy some file to external hdd, than scan external hdd with avast antivirus. I take a cup of coffe and smoke while waiting avast finish it job. I forgot to attach ac adapter on it. When i came back, its already off with power led colour red, indicating that my notebook is low on power. So i charge it, then turn it on. I was surprised to know that my lcd not display anything. Blank without backlight. Every thing run like normal, just lcd not light up. And hdd activity indicator is blinking 3x per second...
    can u help me Stu??

  • K7N2 DELTA ILSR has conflicted with ram....

    K7N2 DELTA ILSR has conflicted with this ram....
    http://www.kingmax.com/product/pro_superMPXB62D-383.htm
    I got 2 * 256MB DDR 400 of the above ram.
    Is there any conflicted with K7N2 DELTA??
    amd 2500+
    thank you
    BIOS version 7.4

    Quote
    Originally posted by utada
    I have already brought kingmax
    These boards are very picky with RAM. As Bonz has pointed out their is an approved list near the top of the Forum but unfortunately I don't beleive Kingmax is on it. Sometimes the generic RAMS run, sometimes not. It seems to be hit or miss. If you want a recommendation of good quality RAM I would suggest MUSHKIN first and CORSAIR second. Good Luck
    Rob

  • Flash Player 10 does not work in IE or Firefox. What could it conflict with?

    I'm  using Firefox 3.6.8 (and sometimes IE 8.0.6001.18702IC) on Windows XP Pro, SP 3.
    For some weeks now, I have been unable to hear any sounds on anything Flash-based, from YouTube to games at MSN.com or embedded videos on any site using Flash.  Initially I had assumed it to be because of having QuickTime installed because I know QT likes to hijack everything.  I uninstalled QT (and Real Player) and Flash Player then reinstalled Flash Player (and Shockwave Player just in case) and guess what?
    Yup.  Nothing.  When I uninstalled everything, I used a program called Revo Uninstaller, which includes a registry cleaning option.  I then used Abexo and WinASO's registry cleaners to make sure I got everything else that even looked like QuickTime off my hard drive.
    When I reinstalled Flash, the following programs appeared in C:\Windows\system 32\Macromed\Flash:
    Flash 10i.ocx (10.1.82.76)
    FlashUtil10i_ActiveX (10.1.82.76)
    FlashUntil10i_Plugin (10.1.82.76)
    genuinst (6.0.2800.1531)
    FlashUtil10i_ActiveX.dll (10.1.82.76)
    NPSWF32.dll (10.1.82.76)
    KB931433
    FlashInstall
    Install
    Flashplayer.xpt
    When I check IE's "Tools" and look for add-ons, it says that Flash (Shockwave Flash) is enabled.  I even enabled the other Adobe add-ons for Acrobat and such just to be sure.  Firefox shows Shockwave Flash and Shockwave for Director both to be enabled.  The Flash control panel settings don't help: I have all sites set to store about 100 KB on my computer to make sure there's enough room for everything but still nothing.
    Before anyone asks, my audio drivers are up to date, thanks to the manufacturer's website.  I have DirectX 9.0c installed and everything else works fine.  I can play audio and video elsewhere with no problems.  It's only Flash that's showing me this trouble and there's no hint as to what else could be interfering with Flash.
    Any ideas?

    Well, great.  I tried the uninstall/reinstall before, but not with the uninstaller, so I was hopeful that this time might do it.  No such luck.  The video still plays, but no sound.
    All the sound settings are working with everything else from games to media players.  I set Windows' firewall to allow both the ActiveX and plugin for Flash, just in case.
    In the Flash folder, I now have:
    Flash10l.ocx (10.1.102.64)
    Flash Util10l_ActiveX (10.1.102.64)
    FlashUtil10l_Plugin (10.1.102.64)
    Genuinst (6.0.2800.1531)
    FlashUtil10l_ActiveX.dll (10.1.102.64)
    NPSWF32.dll (10.1.102.64)
    And the setup and text files that went with 'em.
    I've also done a system restart since then and zip.
    I went through IE and Firefox and looked for any file associations (like .flv) that I could manually change over to using Flash, but no go.  The settings panels for Flash have all been set to allow YouTube specifically (as a test) and to allow 10KB of storage space for all affected sites.
    Now what?  I'm really not looking forward to a reformat and reinstall, but it's looking like that's what it's going to take.
    Date: Sun, 14 Nov 2010 17:37:07 -0700
    From: [email protected]
    To: [email protected]
    Subject: Flash Player 10 does not work in IE or Firefox. What could it conflict with?
    Something is strange with your list of modules; you list FlashUntil10i_Plugin (10.1.102.64), but this is really 10.1.85.3
    I recommend that you uninstall Flash Player completely (using http://kb2.adobe.com/cps/141/tn_14157.html), then restart Windows, and delete all remaining files in C:\Windows\system32\Macromed\Flash.
    Next reinstall both ActiveX (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and the plugin (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe).
    After that, if the problem persists, have a look at this page http://kb2.adobe.com/cps/837/cpsid_83739.html
    >

  • Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome

    Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome. Works in IE. This is my first time trying to post a question - so please be kind. I am also not good with code and am finding css a real challenge after learning to design based on tables. I'm using CS5.
    The "test" page with the slide show is: http://www.reardanwa.com/index-slides.html   The same page without the slide show is http://www.reardanwa.com/
    I realize the images are not ideally sized - I'll fix those once I get the pages to function.  Maybe I need a different slide show? I would prefer a widget that I can modify to required size & postition. Again - I'm not good at building with code from scratch.
    The problem is the naviagation links that are directly next to the slide show do not work in Firefox of Chrome. They do work in IE.
    I've read about using jQuery.noConflict(); code but can't figure out the correct way to use it in my case or whether that's even part of the solution. I know my code is not well organized as I have cobbled together from various sources in an attempt to format the page the way the client wants it. Also, FYI, I will eventually try to make the page work in Surreal CMS.
    I've spent sevaral days over the last several weeks trying to solve sth slide show/navigation conflict - so any specific light you can shed will be much appreciated.
    Thanks in advance.
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>Reardan Area Chamber of Commerce</title>
    <meta name="description" content="home page for Reardan Area Chamber of Commerce" />
    <meta name="keywords" content="Reardan WA, chamber of commerce" </>
    <script src="scripts/jquery-1.6.min.js" type="text/javascript"></script>
    <script src="scripts/jquery.cycle.all.js" type="text/javascript">  </script>
    <script type="text/xml">
    </script>
    <style type="text/css">
                                  #slideshow { 
                                      padding: 10px;
                                            margin:0; 
                                  #slideshow-caption{
                                            padding:0;
                                            margin:0;
                                  #slideshow img, #slideshow div { 
                                      padding: 10px;
                                      background-color: #EEE;
                                      margin: 0;
    body {
              font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
              background: #004B8D;
              margin: 0;
              padding: 0;
              color: #000;
    /* ~~ Element/tag selectors ~~ */
    ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
              padding: 0;
              margin: 0;
    h1, h2, h3, h4, h5, h6, p {
              margin-top: 0;           /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
               /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
    .left
    position:absolute;
    left:0px;
    .center
    margin:auto;
    width:95%;
    .box
              position:relative;
              left:-90px;
              width:950px;
              height:350px;
              border-radius: 13px;
        -moz-border-radius: 13px;
        -webkit-border-radius: 13px;
              z-index:1000;
    .slide{
        position:absolute;
    a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
              border: none;
    /* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
    a:link {
              color: #42413C;
              text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
    a:visited {
              color: #6E6C64;
              text-decoration: underline;
    a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
              text-decoration: none;
    /* ~~this fixed width container surrounds the other divs~~ */
    .container {
              width: 960px;
              min-height:900px;
              padding:5px 0px 0px 0px;
              background: #E8F8FF;
              margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
    /* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
    .header {
              background: #E8F8FF;
              padding:10px 5px 0px 5px;
    .sidebar1 {
              float: left;
              width: 225px;
              margin: 60px;
              color: #FFFF0D;
              background: #595FFF;
              border-radius: 13px;
        -moz-border-radius: 13px;
        -webkit-border-radius: 13px;
              padding: 5px 5px 0px 5px;
        border: 3px solid #F7F723;
        z-index:-1;
    .sidebar2 {
              float: left;
              width: 275px;
              color: #FFFF0D;
              text-align: left;
              background: #595FFF;
              padding-bottom: 10px;
              border-radius: 13px;
        -moz-border-radius: 13px;
        -webkit-border-radius: 13px;
        border: 3px solid #F7F723;
        z-index:2;
    .sidebar3 {
              float: left;
              width: 275px;
              color: #FFFF0D;
              text-align: left;
              background: #595FFF;
              padding-bottom: 10px;
              border-radius: 13px;
        -moz-border-radius: 13px;
        -webkit-border-radius: 13px;
        border: 3px solid #F7F723;
        z-index:3;
    .content {
              padding: 0px 0px 0px 0px;
              width: 780px;
              float: left;
              background: #E8F8FF;
    /* ~~ This grouped selector gives the lists in the .content area space ~~ */
    .content ul, .content ol {
              padding: 0px 15px 5px 10px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
    /* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
    ul.nav {
              list-style: none; /* this removes the list marker */
              border-top: 0px solid #FFFF66; /* this creates the top border for the links - all others are placed using a bottom border on the LI */
              margin-bottom: 50px; /* this creates the space between the navigation on the content below */
              font: Arial Black, Verdana, , Helvetica, sans-serif;
              font-size:1.3em;
              font-weight:bold;
              z-index:2;
    ul.nav li {
              border-bottom: 0px solid #FFFF66; /* this creates the button separation */
              font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
    ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
              padding: 3px 0px 5px 0px;
              display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
              width: 185px;  /*this width makes the entire button clickable for IE6. If you don't need to support IE6, it can be removed. Calculate the proper width by subtracting the padding on this link from the width of your sidebar container. */
              text-decoration: none;
              color: #FFFF0D;
              background: #595FFF;
    ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
              background: #595FFF;
              font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
              color: #FFFFFF;
    /* ~~ The footer ~~ */
    .footer {
              padding: 10px 0;
              background:  #595FFF;
              color: #FFFF0D;
              position: relative;/* this gives IE6 hasLayout to properly clear */
              clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
    /* ~~ miscellaneous float/clear classes ~~ */
    .fltrt {  /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
              float: right;
              margin-left: 8px;
    .fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
              float: left;
              margin-right: 8px;
    .clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */
              clear:both;
              height:0;
              font-size: 1px;
              line-height: 0px;
    -->
    </style>
    </head>
    <body>
    <div class="container">
      <div class="header"><!-- end .header -->
      <a href="#"><img src="images/Chamber-Logo-2.gif" alt="Reardan Chamber Logo" width="187" height="163" hspace="10" vspace="5" align="top" /></a><img src="images/Reardan-Chamber-Title.gif" width="476" height="204" alt="Reardan Area Chamber of Commerce, Dedicated to Preserving and Enhancing Area Businesses" /><p></p>
      <p style="color: #F00">This Site is under construction! Please pardon our dust as we create!</p>
      </div>
      <div class="sidebar1">
        <ul class="nav">
          <li><a href="about.html">About Us</a></li>
          <li><a href="history.html">Reardan History</a></li>
          <li><a href="activities.html">Activities</a></li>
          <li><a href="business.html">Business<br />
            Directory</a></li>
          <li><a href="about.html">Join the<br />
            Chamber</a></li>
           <li><a href="links.html">Links<br />
      <span style="font-size: 85%">Tourism</span><br />
          </a></li>
        </ul>
         <!-- end .sidebar1 --></div>
    <br />
    <br />
    <br />
    <br />
    <div class="box" +"slide">
      <script type="text/javascript">
    // BeginOAWidget_Instance_2559022: #slideshow
                               slideshowAddCaption=true;
    $(window).load(function() {
      $('#slideshow').cycle({
                        after:                              slideshowOnCycleAfter, //the function that is triggered after each transition
                        autostop:                              false,     // true to end slideshow after X transitions (where X == slide count)
                        fx:                                        'blindX',// name of transition effect
                        pause:                              false,     // true to enable pause on hover
                        randomizeEffects:          true,  // valid when multiple effects are used; true to make the effect sequence random
                        speed:                              100,  // speed of the transition (any valid fx speed value)
                        sync:                              true,     // true if in/out transitions should occur simultaneously
                        timeout:                    5000,  // milliseconds between slide transitions (0 to disable auto advance)
                        fit:                              true,
                        height:                       '300px',
                        width:         '525px'   // container width (if the 'fit' option is true, the slides will be set to this width as well)
    function slideshowOnCycleAfter() {
              if (slideshowAddCaption==true){
                                  $('#slideshow-caption').html(this.title);
    // EndOAWidget_Instance_2559022
      </script>
      <div id="slideshow">
        <!--All elements inside this will become slides-->
        <img src="images/100_1537.jpeg" width="600" height="450" title="caption for image1" /> <img src="images/Parade-2011-2.jpg" width="300" height="225" title="caption for image2" /> <img src="images/100_1495.jpeg" width="600" height="450" title="caption for image3" />
        <div title="sample title"> Images for slide show will need to be re-sized to fit box to avoid distortion</div>
        <img src="images/beach4.jpg" width="200" height="200" title="caption for image4" /> <img src="images/beach5.jpg" width="200" height="200" title="caption for image5" /> </div>
      <!--It is safe to delete this if captions are disabled-->
      <div id="slideshow-caption"></div></div>
    <div class="sidebar2" "anotherClass editable"><p align="center"><strong>Chamber News</strong><br />
    Local News item
    <br />
    Another New item</p>
      <p align="center">lots of news this week<br />
        <br />
        <br />
        <br />
      </p>
    </div>
    <div class="sidebar3" "anotherClass editable"><p align="center"><strong>Upcoming Events</strong></p>
      <div align="center">    <a href="activities.html" style="color: #FFFF0D">Community wide yard sales</a><br />
        <br />
        <br />
        <br />
        <br />
      </div>
    </div>
    <div class="content"><br />
    <br />
    </div>
    <div class="footer">
            <p align="center"><span style="font-size: small">Reardan Area Chamber of Commerce</span><br />
              <span style="font-size: x-small">[email protected]  - 509.796.2102</span><br />
            </p>
            <!-- end .footer -->
    </div></body>
    </html>

    If you DO want the slideshow overlaping the navigation try the below css:
    .sidebar1 {
        float: left;
        width: 225px;
        margin: 60px 0px 60px 60px;
        color: #FFFF0D;
        background: #595FFF;
        border-radius: 13px;
        -moz-border-radius: 13px;
        -webkit-border-radius: 13px;
        padding: 5px 5px 0px 5px;
        border: 3px solid #F7F723;
    .box {
    float: left;
    margin-left:-60px;
    width:700px;
    height:350px;
    border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;

  • The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

    I have a user on an iMac 10.6 connected to our domain.  She uses Outlook web access for email on our exchange server.  Last week she received the following message which is randomly preventing her from sending emails.  She claims no attachment was involved in the original email when this all started.  I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue.  I realize this may not be Mac related but thought I'd give it a try.  She did say it occurred once over two days while working on a PC but it continued over the past weekend.
    If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
    This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

    PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
    If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

  • Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open.

    Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
    Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

    Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
    Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

  • How to Rename a Topic ID in Map File to Avoid Conflict with Another Program?

    Robo 8 HTML:
    Can somebody assist me in understanding how to rename a topic ID in my map.h file?
    An application programmer informs me there are nine topic IDs (shown below) in my project map file which conflict with predefined names of constants/functions from the Visual Studio Libs program and, is requesting I change the names of the topics listed below to resolve topic ID conflict in order to enable F1 call for these topics.
    #define Open    59
    #define Save    60
    #define Print   63
    #define Cut     72
    #define Copy    73
    #define Paste   74
    #define Clear   75
    #define Status  81
    #define Substructure  139
    Can I simply alter the topic names and retain their associated map numbers in <Create/Edit Map ID> dialog to resolve the map file conflict with Visual Studio Libs program functions? Or, is there more work involved in changing a topic name in a map.h file?
    Any assistance with this question is greatly appreciated.
    Thanks,
    robert

    Hi,
    Simply renaming the TopicID's in the .h file won't work. The TopicID is used in the alias file (projectname.ali) to link a map number with a topic. Also, you can use either TopicID's or map numbers to call the help. (Using TopicID's only works for WebHelp afaik.)
    If you use map numbers to call the help, you can rename the TopicID using the mentioned dialog. No problem.
    If you want to change the ID from the files, you have to change both the .h file as the .ali file. No changes to topics needed.

  • How to get web application to use Tuscany without conflicting with SAP SDO

    Hi,
    We are attempting to run a web application on SAP NetWeaver CE 7.1 SP1 which uses Tuscany SDO.  As it now stands We must use Tuscany because the web application will not run with the SAP SDO implementation provided by Netweaver. To ensure that Tuscany is loaded with priority, we have packaged the Tuscany JAR files and their dependencies as a heavy resource, as described here:
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60642a88-95fe-2b10-d387-a245d48fc257?overridelayout=true
    The final check showed that Tuscany was correctly deployed as a heavy resource and included the following JAR files:
    common-2.2.3.jar
    ecore-2.2.3.jar
    ecore-change-2.2.3.jar
    ecore-xmi-2.2.3.jar
    tuscany-sdo-impl-1.1.1.jar
    tuscany-sdo-lib-1.1.1.jar
    tuscany-sdo-tools-1.1.1.jar
    xsd-2.2.3.jar
    We also verified that the web application using Tuscany has a hard reference to the Tuscany heavy resource.
    However, when we try to run the web application, the following error is logged:  java.lang.LinkageError: Class commonj/sdo/DataGraph violates loader constraints
    The issue is definitely due to some kind of classloading conflict with the SAP SDO library, as the application runs normally when SAP SDO is manually removed from the classpath. Doing this on a production system is unfortunately not an option, though.
    So the question is: how to get web application to use Tuscany without conflicting with SAP SDO?

    I took a look at the "printerReady" example.  Looks like I may be able to use the InetPing (...) function to ping through a range of IP addresses looking for a response.
    Any ideas on how to find the MAC address associated with the IP addresses that respond?
    We may have multiple units responding and the MAC address will allow the operator to determing which unit to connect to.
    I'll try the InetPing to see how it works,
    Kirk

Maybe you are looking for

  • XML Data Source: does not seem to validate against XSD

    I setup XML data source using the example "b-c.xml" and "b-c.xsd"; I changed the root element of "b-c.xml" from "<db>" to "<Customers>"; but Liquid Data does not seem to care or validate the instance document against the XSD. Is this a known bug? It'

  • Jdk 1.6.0

    hi Now l use the jdk1.6.0 ,but l meet some problem as follows: l have install the jdk1.6.0 and jvm but l can not run jdk1.6.0\demo\ (applet)when it show the error message " can not load java jvm from <\bin\server\jvm.dll>" ,My OS is Microsoft Windows

  • External .swf not loading on HTML pages

    Good morning, I'm having trouble and I was hoping someone could shed some light on what I'm doing wrong. I have a main .swf file from which external .swf files are being loaded through the use of buttons. When I preview the animation, everything work

  • Assigning of Prodn Order

    Hi Experts, Can we assign the production order to the particuler employee?. If yes, how?. Can we get the details about production orders which is assigned to the particular employee?. If yes, How?. Please explain me. thanks, Vijay.

  • Switching views in iTunes -- song list to album to artist...

    How do I get the older/better/more efficient interface back for my iTunes?  I switch between these views all the time and it was one click -- now it is a royal pain in the butt!  What happened to the cleaner interface?  How do I get it back?