MTE Class for qRFC monitoring

Hi experts,
I need to configure a new queue group to monitor some of the outbound qRFC BW queues. Which MTE class should i opt for in RZ21? And which Exit FM should i select?
Thanks.
Rgds,
Diana

Please check whether saposcol is running, also check the status of the agent in Rz21.
Test the agent and connection.
Regards,
Jagan

Similar Messages

MTE class for the monitoring SAPDB systems (tcode DB50)

Hi!
I would like to set up the monitoring of tcode DB50.
Here I would like to check, whether the monitors
DB50 --> Problem analysis --> SQL performance --> Command monitor
as well as
DB50 --> Problem analysis --> SQL performance --> Resource monitor
are red/deactivated.
How can I do this?
Is there some MTE class behind it?
If no how can I build such one?
Thank you very much!
regards
Thom

Hi Marcus,
No, I mean quite the contrary:
I would like to monitor automatically with MTE class.
Both monitors should be red/deactivated.
If it is not the case, an alarm should be created.
Unfortunately I cannot find the MTE path under RZ20: CCMS Monitor Templates --> Database
My Question:
Do you have any ideas how to set this action automatically?
a) to use an existing MTE
b) to create a new one
c) to write ABAP program
d) to create eCATT
Thank you very much!
regards
Thom

MTE class for number off all IDocs

Hi,
I used SAP note 872569 to add additional information to my SLA reporting.
But I still need the MTE for the number of all IDocs / month.
Can anyone help me?
Kind regards
Timm

Try the reports under Classification. Tcode CL6B - Object List might give you what you are looking for.
and also check the link
http://help.sap.com/saphelp_46c/helpdata/en/7a/e9d5d12faf11d4b2e40050da4ceab0/content.htm

MTE class for total tablespace size

Hi,
We start a monitoring over the solutionmanager and i asked myself, if it's possible to show the total size of a tablespace.
I only see the free and used space, but not the total.
In moment we calculate the total space with these 2 results, but it is possible to have large difference in total. But i need these data for the reporting.
Thanks in Advance

It is a very good thing to use the command line queries to understand these things. But it is also good to know your tools. You should check tablespace size with dbconsole, it shows nice little pictures of how much space is used. Note that your system tablespace is autoextend, and this is a good thing, since as Sybrand noted, that's where the PL/SQL is stored. As a practical matter, unless you are adding a lot of new code, that tablespace tends to expand to a steady size and just stay there. You don't want to fix it there, because you might add new code in the future.
On the other hand, sysaux and your data may need some watching. If you are curious, you can use the tablespace map function in dbconsole to see what is where in tablespaces (and there are scripts floating about to see it command line style). But don't stress over it, Oracle is really good about doing things right. What you have to watch out for is things like auditing or plan maintenance becoming space hogs in sysaux, and some apps, sometimes combined with some bugs, can use too much data space. But really, you shouldn't bother with it too much unless you see something using way more space than you would reasonably expect.
If you want to obsess over something, consider patching. 11.2.0.1 is not a good sign.

Central auto-reaction for weinqueue and weoutqueue - which MTE Class

Hello,
In my CEN system (SAP Solution Manager), I want to assign a central auto-reaction method - for all my managed systems - regarding :
1. IDoc Inbound Queue - weinqueue
2. IDoc Outbound Queue - weoutqueue
In SAP Solution Manager, from RZ21, Technical Infrastructure, Configure Central System, Assign Central Autoreactions,
you choose the managed system SID, the MTE Class and the "Central Autoreactions".
Do you know what is the MTE Class for both "IDoc Inbound Queue - weinqueue" and "IDoc Outbound Queue - weoutqueue" ?
Thanks
Best regards
PC

Hi PC,
it is ALEIDcMTClass but its common for both Inbound and outbound idocs (Generic).
the other option is ALEIDcMTAttCl but it s generic and is specific to a object you are looking at.
You have to manage/configure the autoreaction according to the object you are looking at.(Monitoring object).
Thanks,
jagan
Edited by: jagadheeshan govindasamy on Aug 31, 2009 6:32 PM
Edited by: jagadheeshan govindasamy on Aug 31, 2009 6:33 PM

Alert Monitor:MTE Class MonitoredProcessesSum absent in Nw04(SAPKB64013)

hi gentlemens
I am trying tune alert monitor, but unfortunately in our system absent
MTE Class for monitornig work processess
CCMS_GET_MTE_BY_CLASS
Ïàðàì. : R3System = ' ' , MTEClass = MonitoredProcessesSum
CCMS_GET_MTE_BY_CLASS
Ïàðàì. : R3System = ' ' , MTEClass = ProcMonConfig
CCMS_GET_MTE_BY_CLASS
Ïàðàì. : R3System = ' ' , MTEClass = ProcMonStatus
Saposcol collect statistic from operation system level how described in detail in
http://help.sap.com/saphelp_erp2005/helpdata/en/49/f7ab3b92818b70e10000000a114084/content.htm
but I can`t include this statistic in central alert monitor system
What I doing:
RZ20->Extras->Activate Maintenance Functions->Make Monitor->Rule Node(CCMS_GET_MTE_BY_CLASS)->
After that I must select MTE Class MonitoredProcessesSum
http://help.sap.com/saphelp_nw04/helpdata/en/62/7f853b175d214ee10000000a11402f/content.htm
but I can`t - class is absent
Help me please.

Resolved - Note 790639

No MTE class assigned

Hi,
I had configured the system monitoring for satellite system. But when i check the alerts in tcode SOLUTION_MANAGER and click on the link on the alerts for e.g. Response time; it says no MTE class assigned.
Where can i assign MTE class for the satellite system in solution manager? How to check which MTE class to assign?
Waiting for reply....
Thanks,
Rohan

Hi,
Please follow below step:
1 Login to the OS level of satellite system and execute the below command.
sapccm4x -R pf=/usr/sap/<SID>/SYS/profile/<SID>_D01_<hostname>
2. Go to t code rz21 and select topology
Click on Agents for Remote System & click on Display overview
3.Login to CEN Server & go to T-code RZ21 & Activate system central dispatching
Activate background dispatching from Technical infrastructure menu
4. Check RFC in satellite and CEN
Go to T-code SALRT1 & maintain that created RFC <name> and save
5. Activate the alrtinbox service in SICF T-Code. SAP -> BC -> BSP -> Sap -> alrtinbox
Go to T-Code Alrtcatdef to create the category. Select CCMS Alerts & click on Change
assign sender and receiver
6. Enter the T u2013 code rz21
Click on Methods
Call on Related MTE Class
Click On display / change button
Select method assigned to MTE Class
Create the same method in MTE Class window
Enter MTE class name and method name
Save and go -> back
7. Enter t code rz20
create satelite sysem
activate maintance function
assign MTE class to specified method
Regards,
kalees

Where can I find Up-to-date yet detailed description on CCMS MTE classes

Hello!
I am wondering if there are any complete documentation about Predefined
MTE classes for CCMS tool set. The document of "Predefined Monitors for the Alert Monitor" on the service marketplace is rather incomplete covering the part of predefined MTEs. We are currently using ERP 2004.
Thank you.
Harumi

Hello.
The best place I've found for this is help.sap.com. Check this link:
http://help.sap.com/saphelp_nw70/helpdata/en/c4/3a7dfc505211d189550000e829fbbd/frameset.htm
... and go to section "Predefined monitors for the Alert Monitor"...
If somebody knows a better information source, it would be great for me...
Regards,
Fermí

Ccms monitoring single definition under and MTE class

Hi Guys
For CCMS monitoring under RZ20 i am looking for a way to define a node that allow me to monitor a specific definition for those mte that dinamically create those definitions from the source system, for instance
if you select MTE class: filesystem you get the list of all the filesystems, like
/db2/SM1/sapdata1
/db2/SM1/sapdata2
/var
So lets says I just want to monitor /db2/SM1/sapdata1 and not to display the rest of the filesystems on RZ20
is there a way to configure this? maybe using some kind of filter for the name.
I want to configure this for the j2ee connector service but i get a buch of connector Applications RZ20 and I just want to monitor one of those Applications
Thanks for your help.

Thanks for this good document but I think it is not enough for me. I had registered the sapccmsr agent with J2EE option but it is not monitor the database correctly on the same physical server. In the Monitoring node of server process in Visual Admin i can't find a relevant object to activate database free space monitoring. In posted document I can't find the detailed information, too. Please provide me with a detailed specific information. Many thanks.
Which service is relevant to collect database relevant data to monitor non ABAP databases like single J2EE instances oder non-SAP Databases.
Edited by: Rene Schulz on Nov 19, 2008 3:16 PM

Monitor MTE Class "CCMS_DB_mcmtc"

I have one question regarding monitoring of the SAP Systems and the MTE Class CCMS_DB_mcmtc from Solution Manager.
In the satellite systems, that are monitored from another Solution Manager, I have the monitor "SAP DB"
(Tcode RZ20 --> SAP CCMS Monitor Templates --> Database -->SAP DB)
In satellite systems , that are monitered from my Solution Manager, I miss the monitor "SAP DB" and have only
(Tcode RZ20 --> SAP CCMS Monitor Templates --> Database )
If I try to create the monitor SAP DB the popup warning tells me SAP monitor sets cannot be modified
The problem is that, if I create monitor with MTE Class CCMS_DB_mcmtc, then I receive the warning for the appropriate satelite system:
<SID> : MTE class CCMS_DB_mcmtc : No MTEs currently available
What are the technical steps to solve this problem?
Thank you very much!
Regards
Thom

Hello Thom,
> Tcode RR20 ...
> Which monitor should be checked?
SAP CCMS Technical Expert Monitors - CCMS Selfmonitoring
> Where do I find the background dispatching?
This is described in the Online documentation: <a href="http://help.sap.com/saphelp_nw70/helpdata/en/be/44443c4a08ba26e10000000a114084/frameset.htm">Activating and Deactivating Method Execution</a>
Please note that you have to check this in the monitored system, not in the CEN!
Regards, Michael

Central auto-reactions for individual MTEs, not entire MTE classes

Hello.
I am trying to set up central autoreactions on a Sol Man system (CEN) to monitor certain MTEs on a satellite system (soon to be many more satellite systems and other MTEs). I know that auto-reactions can be assigned to a satellite system and specific MTE class in RZ21 on CEN, but I don't want auto-reactions for every MTE in a specific class. For example, I want to monitor the percentage full for a specific file system, which has the class "FilesystemPercentageUsed", but there are many other MTEs in the parent "file systems" branch which also have the same class. I only want a central auto-reaction for the one--not all of the MTEs in that class.
Has anyone else achieved this? If so, I'd love to hear your recommendations. Any help is appreciated!
Thanks!

Hello Matthew,
central autoreaction is only possible for MTE classes.
> For example, I want to monitor the percentage full for a specific file system, which has the class "FilesystemPercentageUsed", but there are many other MTEs in the parent "file systems" branch which also have the same class. I only want a central auto-reaction for the one--not all of the MTEs in that class.
In this case: change the MTE class. As you use already agents (otherwise central autoreaction would not be possible) you can configure the agent to use MTE classes different to the default ones.
The Online documentation for the agents describes this: [Monitoring Operating System Data with CCMS Agents|http://help.sap.com/erp2005_ehp_03/helpdata/EN/2b/6dcd06dc6b084a840f209e027e39b1/frameset.htm].
Regards, Michael

CCMS for MTE Class CCMS_DB_mcmtc

Hello!
I would like to set up CCMS for satellite systems with <b>SAP DB</b> (MTE class: CCMS_DB_mcmtc)
The very interesting elements from this MTE are:
- Used Log Space
- Last successful Complete Data Backup
- Last Complete Data Backup Return Code
The problem is, if I save this I get the warning:
<SID> : MTE class CCMS_DB_mcmtc : No MTEs currently available
How can this be solved?
Thank you very much indeed!

Hi Thom,
Did you get a solution to your problem? I am having the same problem!
Please share your solution if you got one.
Thank you,
Nic

CCMS qRFC Monitoring: Missing Transactional and Queued RFC Monitoring Nodes

Hi ,
We are trying to create a Queued RFC monitoring for VERTEX Queued , but we are missing CCMS Monitor Templates,in monitor Communications -->Transactional RFC and Queued RFC in Dev and PROD ,but its present in QA System .
I have checked all system are at same level for support packs , kernel version .
I have refered following Notes - 441269,437187,455431, 485826
Can we create manually new one , but we are missing MTE class also ?
Can we create new monitoring template ?
We are running 4.6c with basis support pack level :
SAP_BASIS 46C 0054 SAPKB46C54
SAP_ABA 46C 0054 SAPKA46C54
Thanks
Hamendra

Hamendra,
Please make sure background dispatching is activated in your system. Go to tcode RZ21 and menu Technical Infrastructure --> Method execution --> Active background dispatching.
This should schedule a job called SAP_CCMS_MONI_BATCH_DP. This is the job that will run the function for building the ALE/EDI monitoring segment.
After scheduling the job check back in a few hours, if the ALE/EDI monitor is still not there try the following.
1. Go to tcode RZ21
2. In the topology section choose radio button "Segment overview" and click display
3. Go into change mode and delete the monitoring segments
This will force the system to recreate all the monitoring contexts.
Check back in a few hours and see if the monitor is working.
Tarkesh

Configuring CCMS alerts for Availablity Monitoring

Hi All,
We are in the process of configuring availablity monitoring in central system (solution Manager 7.0 with SP stack 23) to monitor all systems (ABAP,Java,Dual Stack, Trex,DMS,etc) in landscape.
As a first step, we have registered CCMS agents in monitored (ABAP) system and connected to central system (Solman)
All the required RFCu2019s have been defined for data transfer between monitored and central system
In RZ20,i could see the availablity as 100% for the defined moniored system under SAP CCMS Technical Expert Monitors>All Contexts on Local Application Server>CCMS self monitoring >CCMS agents>CCMSPING.hostname
Not sure whether above path is the place where in we look for alerts
Please clarify the below points
i) how to configure the email alerts (in RZ20) from the central system when monitored system is down
ii) the path in which I can find the alerts in RZ20 for that monitored system or how to add the monitored system incase if that doesnt exists
iii) MTE class under which analysis, auto reaction method to be assigned ?
iv). data collection method and frequency
v). Which MTE class to be used to assign the Autoreaction method (CCMS_test_mail alredy defined)
Appreciate your quick response on this
Thanks,
vadi

Hi All,
Thanks a lot for your reply.
Still i m having an issue in handling the RZ20 alerts managemnent
In RZ20,
i) i able to see the added monitoried system id under the node CCMS Monitor templates>Availablity & performance overview>Availablity-->monitored sys id
ii) When i click on open staus for the above node turns to green color
ii) when i click on current status the node turns to grey color
I am not sure whether the data collection is being passed since it doesnt turn red when the system is down
However the dispatching jobs are active in both CEN and monitored (000 client) systems
Appreciate your response
Thanks,
Vadi

CCMS Deleted MTE Classes

Hi there,
i'm on R3 4.6c.
I accidently deleted a Part of an Monitor Tree with "Option 4" which not only deletes the MTE Klasses from shared memory, but also from DB. (Hint: 392272)
Missing Nodes:
RZ20->SAP CCMS Admin Workplace -> Entire System -
>
--> SID -> Application Server
--> SID -> R/3 Services -> Dialog / Update
I can identify the missing MTE Classes in the RZ21 "Overview of MTE Classes".
E.g. all
R3ApplicationServer                      SAP-DEFAULT
R3ApplicationServer                      SAP-DEFAULT_OLD_001
R3ApplicationServer                      SAP-DEFAULT_OLD_002
R3ApplicationServer                      SAP-DEFAULT_OLD_003
R3ApplicationServer                      SAP-DEFAULT_OLD_004
R3ApplicationServer                      SAP-DEFAULT_OLD_005
are missing.
If i want to reset an empty MTE Class, like the Application Server, i get an error:
"Operation not possible for the following nodes
Knotenname (MTE)   Typ
Application Server Virtuell "
(I agree with that error, because the Class Definitions are missing )
I found no way to transport the missing class definitions from another System.
Any Suggestions?
Regards
Manuel

Hi Bidwan,
thx 4 your answer. I opend an OSS which give me the same solution as you say.
The MTE Classes are created by the SAP Kernel, if they are not existant.
An reboot of the App Server solves the Problem.
I was confused by an Hint where SAP is talking about MTE Classes in Shared Mem and on the Database.
If you used "Option 3 or 4" to delete MTE Classes, they where deleted from the shared mem AND from the DB.
So i thought an restart of the App Server only get back my shared mem objects, but not them from the Database.
I was wrong. The SAP Kernel is my friend :).
Lesson learned
Regards
Manuel

MTE Class for qRFC monitoring

Similar Messages

Maybe you are looking for