MTM Is possible make an exploration test with action recording on lab center machine (using hyper-v)?

Hi everybody.
I am getting crazy with Lab center. I cant record an exploration test if i try to make it on Lab center's remote machine.
I have follow msdn help. And if i make it on local machine it works fine.
Test agent is configured correctly like "Interactive process".
On lab center, my Lab status is "Ready".
Connecting with lab center to target machine, Test Agent status is "Online" before run exploration test.
While exploration test is running, Test Agent status is "Running Tests".
But when I make click on "Create Test case" there isn't any information of desktop click events from target machine.
By other hand, when i finish there are attachments file with info from target machine. As you can see on the flowing pick:
And this make me come here to answers: Is possible make an exploration test with action recording on lab center machine (using hyper-v)?

Hi everybody.
I am getting crazy with Lab center. I cant record an exploration test if i try to make it on Lab center's remote machine. I am using standard
lab environment.
I have follow msdn help. And if i make it on local machine it works fine.
Test agent is configured correctly like "Interactive process".
On lab center, my Lab status is "Ready".
Connecting with lab center to target machine, Test Agent status is "Online" before run exploration test.
While exploration test is running, Test Agent status is "Running Tests".
But when I make click on "Create Test case" there isn't any information of desktop click events from target machine.
By other hand, when i finish there are attachments file with info from target machine. As you can see on the flowing pick:
(sorry i cant upload the pick until Microsoft verify my account)
And this make me come here to answers: Is possible make an exploration test with action recording on lab center machine (using hyper-v)?

Similar Messages

CS6 stamp tool doesn't work with action / record ( tool record is enabled ) other tools works

CS6 stamp tool doesn't work with action / record ( tool record is enabled ) other tools works

At one time tool recording was not possible and if you install Adobe Scriptlistener Plug-in Adobe will disable tool recording its never an option.
I use and record actions all the time and was looking forward to tool recording when Adobe announced it. However I found what they delivered was of very limited value because of the restrictions. I do not care that Adobe disables tool recording on my machine.
The amount of data that gets reordered seems also vary between machines. I found that Action recorded on fast machine are not usable on slow machine. Fast machine recorder too much data.
Documents you use such action on must also have the same size and resolution as the document you recorded the action on. Quite a restriction.
You problem may also be foxed in CC 2014 sett here Photoshop CS6 - Recording the clone tool in an action gives incorrect results on replay.

MTM - Lab center - Action recording - Manaul Testing

Hi,
I have created some test runs via MTM using manual testing I want to automate it by using coded UI project.
1. How do I link my test results recording to my project, which work item should I look for? it seems the test run is not associated with any work item, any ideas?
2. I made my recording under a local machine environment, Is it possible to associate a new standard lab environment to run those automated tests. My main issues is how I link between my test run recordings to the new standard lab, Is it possible. Do I need
to to deploy a build deploy test.
Thanks in Advanced.

Hi everybody.
I am getting crazy with Lab center. I cant record an exploration test if i try to make it on Lab center's remote machine. I am using standard
lab environment.
I have follow msdn help. And if i make it on local machine it works fine.
Test agent is configured correctly like "Interactive process".
On lab center, my Lab status is "Ready".
Connecting with lab center to target machine, Test Agent status is "Online" before run exploration test.
While exploration test is running, Test Agent status is "Running Tests".
But when I make click on "Create Test case" there isn't any information of desktop click events from target machine.
By other hand, when i finish there are attachments file with info from target machine. As you can see on the flowing pick: (sorry i cant upload the pick until Microsoft verify my account)
And this make me come here to answers: Is possible make an exploration test with action recording on lab center machine (using hyper-v)?

Apple IIGS RGB Monitor How ot Hook up to test with a PC

Hi,
I'm hoping I came to thr right place. I have a Apple IIGS RGB monitor I have no way to test it. I no longer have my old IIGS to test this with. I came across this from someone tossing it out. I was hoping to make a RGB to VGA cable but was wondering if anyone has tried this and if tis possible, what did they test with an old pc? Or do you have a better alternative. THe best way it to get a IIGS but that isn't possible at this point. Any and all help would be really apprecaited. I would like to check the monitor and see if it works.
Thanks in advance,
Nick

Many Apple displays of about that timeframe used a DB-15 (two rows of pins) connector. Adapters to VGA (three rows of pins) are readily available from multiple sources that deal in older Mac equipment. The adapters shuffle the five crucial signals (Red, Green+Intensity, Blue, Horizontal-Sync, and Vertical-Sync) so that they line up on the correct pins for VGA. There is only ONE way to connect the five key signals that will produce a picture, and every adapter (that is not defective) will connect those signals correctly.
You must be careful to get an adapter that has the right male and female connectors. There are two main types, one intended to adapt Mac displays to VGA computers, and the other intended to adapt older Mac computers to VGA displays.
Mac adapters also provide a code on pins 4, 7, and 10 that tells the older Mac what class of displays is attached, If you plan on using this with a Mac later, you will need the right adapter, or one with tiny switches. The various adapters differ ONLY in the ID bits on pins 4, 7, and 10, not in the basic connection of the Video signals.

Performance testing with PetStore

I'm going to make some performance tests with WebLogic 7.0 and Oracle 8.1.7.
Sun´s PetStore is some kind of basic web application. So I decided to use it for
test application. The PetStore isn´t the best J2EE application, but it suits for
this test just fine.
Has anybody already made database creation clauses or scripts?

          http://www.amazon.com/exec/obidos/ASIN/1904284000/qid%3D1051548860/sr%3D11-1
          /ref%3Dsr%5F11%5F1/002-8384620-0940857
          "Tony Glaccum" <[email protected]> wrote in message
          news:3ead5520$[email protected]..
          >
          > Tom Barnes you mentioned a book "J2EE Performance Testing with BEA
          WebLogic Server"
          > by Peter Zadrozny, Philip Aston, Ted Osborne. Any idea when this was
          published
          > - I have searched Amazon plus a few book stores and cannot find it.
          >
          > Thanks

Is it possible to integrate LSO 600 with an external system without SAP PI?

Hi,
as asked in the title, i am wondering if it is possible to integrate LSO 600 with an external (non-SAP) system without using SAP PI/XI. The external system is a middleware application which can handle RFC functions, IDocs besides the usual web service communications.
However, i don't know how LSO and SAP PI are integrated so i wonder if their interfaces are such that instead of SAP PI another middleware could be used.

Web Services are used. If you were to implement the services in your 3rd party middleware and configure SAP to call it, I suppose it is possible. The external course catalog can be used for CourseEnrollment and LearningProgress. See the application help for details. Don't expect to receive support from SAP with such a setup however.

Type 2 Virtual Machine in Hyper-V will not PXE boot with WDS

Hi
Bit of a wierd scenario this but I'm doing a bit of a lab experiment kind of thing. The setup is as follows:
VMWare Workstation 10 with Windows Server 2012 R2 running as a virtual machine. In VMW10 I have a NAT network interface and a Bridging interface set to load with the virtual machine. These seem to work fine (although the NAT doesn't seem to want to connect
to the internet but that's why the bridging one is there in addition).
Server 2012 is configured with the following roles:
ADDS, DHCP, DNS, Hyper-V, Printer, WDS
I have correctly configured WDS to work on the same machine as DHCP and I can get PXE boot working with WDS on a Type1 Virtual Machine in Hyper-V using the Legacy Network adapter. My problem is when I try and PXE boot on a Type2 Virtual Machine (this type
is new in R2 and should eliminate the need for a legacy network adapter) using the same network interface that I used for the Type1 machine, I get an IP address from DHCP but WDS doesn't seem to respond. Instead I get the "PXE-E16: No Offer Received"
message. I have tried just about everything I can think of and spent the whole day trying to figure out why this is the case but came up with nothing. Has anyone else encountered this or can anyone shed any light on the matter?
Many thanks in advance

"VMWare Workstation 10 with Windows Server 2012 R2"and "Server 2012 is configured with the following roles: ADDS, DHCP, DNS, Hyper-V, Printer, WDS"
Hyper-V is not supported to be run as a VM. It is a Type 1 hypervisor, which means it works on the bare metal. You have it running as a VM on a Type-2 hypervisor, so it has no access to the bare metal. Yes, VMware may have made it so some
things work in that environment, but it is not a supported (or tested) environment for Hyper-V.
.:|:.:|:. tim

I am getting this error message when I open Safari. How do I make it go away? "Error Safari 6.0 (v8536.25) has not been tested with the plugin SplashId.bundle (null) (v6.0.4(. As a precaution, it has not been loaded. ?

Error
When I launch Safari on my MacBook Pro
Safari 6.0 (v8536.25) has not been tested with the plugin SplashId.bundle (null) (v6.0.4(. As a precaution, it has not been loaded. Please contact the plugin developer for further information.
I am getting this message when I open Safari. How do I make it go away?
Thanks, Ed Williams

To Remove plug-in
1.) Open the SplashID desktop app
2.) Navigate from Menu bar "File" -> "Plugin for Safari" -> "Uninstall".
I could not find it in either Library/Internet Plug-ins nor ~/Library/Internet Plug-ins as others have suggested.
Cheers!

Hello, I'm from Belgium and I just bought the iPad 2. I watched a lot of movies and I saw that it's possible to make your own movie with the iPad, but which app do you need to make movies. Greetings, Lars

Hello, I'm from Belgium and I just bought the iPad 2. I watched a lot of movies and I saw that it's possible to make your own movie with the iPad, but which app do you need to make movies. Greetings, Lars

Hier kun je er meer over lezen; http://www.wikihow.com/Use-the-Cameras-on-Your-iPad-2
En hier kun je meer informatie vinden over de iPad; www.iPadforum.tk

ChaRM: Normal Change - Not possible to set "Successfully Tested" unless the Maint. Cycle is set to "In Development with Release"

Hello,
I'm doing some tests with ChaRM, Normal Change scenario.
As far as I know, the following steps would be the correct sequence (concerning development and test phases only):
1) Developers perform the correction in DEV and release their TASKS of the transport request
2) Developer Lead set the Normal Change document status to "to be tested"
3) In background, a Transport of Copies is created with all data previously stored in the original transport request. Then this ToC is transported into QAS
4) Change Manager set the Maintenance Cycle status to "Test"
5) Tester performs the test into QAS
6) Tester provides a valuable feedback and set Normal Change document status to "tested successfully"
According to the following SAP Portal article, it seems to be correct:
http://help.sap.com/saphelp_sm71_sp10/helpdata/en/48/db938dceba518de10000000a42189c/frameset.htm
During my tests, however, I have noticed that it is just possible to go from step 5 to 6 if the Maintenance Cycle status is set to "In Development with Release" (go a step back in the Cycle). Otherwise, I get the following error messages:
Warning Message Details Status was reset by system
Warning Message Details Action RELEASE_ALL cannot be performed during this maintenance phase
Warning Message Next status cannot be set because some actions cannot be executed.
Once I have done the Cycle status change, then it is possible to move from 5 to 6 without errors and then the original transport request is transported into QAS too.
Question: Is this the correct behavior or am I missing customizing?
Thanks in advance for your help.
Daniel

Hello Vivek,
Thanks for your reply.
It is kinda weird the steps sequence, since the Tester needs to tell the Change Manager to move the cycle's status before approving the correction done in QAS (successfully tested).
Perhaps a new action between "to be tested" and "successfully tested" could exist, in order to request the CM to perform the cycle update.
But OK, that's how it is.
Regards,
Daniel

Is it possible make a RAC WITH WINDOWS XP?

is it possible make a RAC WITH WINDOWS XP?
i saw this link..
http://download-uk.oracle.com/docs/html/B10766_08/prewin.htm
and watch this information:
Operating System
RAC for Windows 32-bit is supported on the following operating systems:
- Windows 2000 with service pack 1 or higher. All editions, including Terminal Services and Windows 2000 MultiLanguage Edition (MLE), are supported.
- Windows Server 2003

If you have metalink access you can check the CERTIFY matrix....I just checked and looks like Oracle10gR2 RAC on Windows XP with both 32bit is not supported, but 64bit is.
Thanks
Chandra Pabba

Make a white background with white object is possible? without shadow!

i m contributor photographer in most microstock, i try to make a white backgournd with white object but with lightroom 4 it isn't possible, i think the program have probelm to select white object and white background, i see internet site microstock and there isn't a good photo.
http://it.fotolia.com/id/72385192
there is a little shadow, i don't want this!
can you help me?
thanks,
francesco.

You can't change it within the OS. There may be some apps which will do it. Search Dock on MacUpdate.
But all these types of haxies come with possible risk.
You can file feedback here.

It's possible to make an adobe air with a php files to save data?

Hi,
I would to make a standalone version with Flash Adobe CS3.
How is it possible to make that? A other question, I have a php file to save the data from the user's answer, how is it possible to integrate this file to the air program?
Thanks for your answers and sorry for my english.

If you know where the page is at, I myself don't see any reason why you can't access it.
The only thing I could think was if Livejournal.com had a lock on the page or if you had to sign-in and your u/n and p/w had expired.
I'd say go ahead and at least try.
davewdan

Is it possible to make a search help with dynamic selection table?

Hi Experts,
Is it possible to create search helps with dynamic seletion tables means
i dont know the selection table names at the time of creation of search help.
These tables will be determined at runtime.
if yes, Please give an idea how to create and pass the table names at runtime.
Thanks
Yogesh Gupta

Hi Yogesh,
Create and fill your itab and show it with FM F4IF_INT_TABLE_VALUE_REQUEST
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'field to return from itab'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = 'field on your screen to be filled'
      stepl           = sy-stepl
      window_title    = 'some text'
      value_org       = 'S'
    TABLES
      value_tab       = itab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
Darley

Make a test with thin client

Hi all,
I'm facing a strange boring problem. I've a tomcat runs a webapp that using thin client connects to a remote DB.
From about a week is not able to connect anymore. Java hangs and report this error:
java.sql.SQLException: Io exception: Connection reset
So I've no firewall and listener is correctly working. Telnet to listener is working.
Does anyone has a simple java class to run to make a connection test?
Thanks
Stefano

Use preparedStatement either like this
String query = update tableName set datefield= TO_DATE(?, 'YYYY-MM-DD HH24:MI') where id= ? ";
and setString(1, string);
or
String query = "update tableName set datefield= ? where id= ?";
and setTimestamp() or setDate () depends what you need in your date field .
Bets regads Alexey.

MTM Is possible make an exploration test with action recording on lab center machine (using hyper-v)?

Similar Messages

Maybe you are looking for