Mtn Lion won't see CanoScan LiDE 90

10.8.2 won't see my CanoScan LiDE 90 scanner, which worked just fine via Preview until very recently (must be a recent sw update caused this?) I've installed new driver from Canon, but system doesn't recognize it's there -- not even in Apps. Any ideas? Thanks.

You might try the page below. You can ask Canon for help:
http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan _lide90#ServiceAndSupport

Similar Messages

Image capture won't recognize Canoscan lide 700f

Hello. I have OS X, v. 10.6.7 I have been using Image Capture to run the Canoscan lide 700f scanner. Then, it stopped recognizing the scanner. Image capture is opened and says "no camera or scanner attached." The scanner is operational. The MAC sees the printer in systems preferences > hardware > print and fax. Any ideas on what I can do to get this scanner recognized by Image Capture again? Thanks for your help.

I had the problem with the same scanner and Lion. When the Mac would go to sleep, Image Capture would not recognize the scanner after it woke up. Had to unplug and replug the USB connector to get it to start correctly. I was blaming it on the scanner driver, but I accidently discovered that if I opened Adobe Photoshop Elements 6, all of a sudden the scanner would respond to an attempt to import from the scanner (to Elements). After that, Image Capture could talk to it just fine. So it appears that it is an Image Capture problem and not an issue with the Cannon driver.

I have just downloaded OSX Mountain Lion. I have Canoscan LiDE 110. I am continuously getting an error message, "MP Navigator EX quit unexpectedly. Application Specific Information: *** Terminating app due to uncaught exception 'NSInvalidArgumentException

I have just downloaded OSX Mountain Lion 10.8.3 and installed it on my lap top. I have Canoscan LiDE 110. I am continuously getting an error message, "MP Navigator EX quit unexpectedly when ever I try to scan a document. Application Specific Information: *** Terminating app due to uncaught exception 'NS Invalid Argument Exception..."
Please let me know how to solve this problem.

LexSchellings wrote:
According to www.roaringapps.com the MP Navigator EX does not run on Mountain Lion.
There are different versions of MP Navigator available depending on the Canon device you have. And there are version of this app that do work on 10.8. So www.roaringapps.com would need to amend their statement.
LexSchellings wrote:
Instead I use Canon Solution Menu EX, which does even more for you than the MP Navigator. This Solution Menu runs perfectly on Mountain Lion.
Solution Menu is just a front-end for other Canon applications. When you click on the Use Scanner menu and select Auto Scan, OCR or Attach To E-mail, MP Navigator will open.
As for the OP, they can obtain the latest version of MP Navigator, which is 10.8 compatible, and the supporting scanner driver via this link.
http://support-au.canon.com.au/P/search?model=CanoScan+LiDE+110&menu=download&fi lter=0&tagname=g_os&g_os=Mac%20OS%20X%20v10%2E8
And you don't need to uninstall an older version. The new version will overwrite.

How do you get canoscan lide 110 scanner to display in "file import" menu?

I have several older versions of Photoshop Elements running on various computers. In ALL of them, if you go to "File>Import" you see "Canoscan LIDE xx". when you choose it, there is a great scanning application that runs. On a newer computer, i had Photoshop CS5.5 installed. It only shows WIA under the import menu. The scanning software there is horrible. I tried installing the same scanner (lide 110) on an older computer running older photoshop elements and it showed up. i then installed a older version of the elements software on the new computer. Again, the scanner showed up. Not wanting to break licensing agreements, i just downloaded a brand new version of photoshop elements 12 and installed it. it only shows WIA in the file/import menu and not the scanner. therefore, i dont have the scanning software/application i need. without it, this version of elements is 100% useless to me. can someone please help me get my scanner to appear in the "file>import" menu? Yes, i do have the latest version of software downloaded from canon's website.

Hi,
I believe that this is where PC & MAC versions differ.
The PC version will "get from scanner" in the organizer but the MAC version has to "Import from scanner" in the editor. I don't know why they act differently.
It has been posted on this forum (can't find thread at the moment) a fix for the windows version of copying a module from a previous version if you had one. That is not an official fix.
If I find the link I'll post back.
Brian

Is there a CanoScan LiDE 60 Driver for Lion?

Mac OS X Lion does not seem to have a driver pre-installed for the CanoScan LiDE 60 scanner. There also is no current option for a lion driver on the scanner's Manufacture support web site. Does anyone know a way to fix this?

Below is the FIX that I received from Canon - long but it works!!!
We are currently in the process of updating the listings on our website.
However, the 10.6 drivers are compatible with OS 10.7/Lion.
If you upgraded from 10.6 to 10.7, the drivers will have to be
reinstalled. The steps below will show you how to remove the drivers
from the system. If any items are not listed, move on to the next step.
Please perform the following:
1. From the Finder, hold the 'Control' key on your keyboard and click
the 'Go' menu at the top of the screen.
2. Open the 'Library' folder.
3. Open the 'Image Capture' folder, then open 'Twain Data Sources'.
4. Trash the CanoScan CanoScan XXXX.ds file.
4-1. Make note of any other files that may be in this folder. If
other files are present, move them to the desktop for now. Then place
them back after successfully using the scanner.
5. Return to the 'Library' folder.
6. Open the 'Preferences'
7. Locate and trash the 'CanoScan XXXX' folder.
8. Close the window and double-click on the Macintosh HD icon.
9. Double-click on the folder named Users.
10. Double-click on the folder named Shared.
11. Trash the folders named CanoScan, or starting with CNQL.
12. Return to the applications folder and Trash the CanoScan Toolbox
folder.
13. Open the Macintosh HD.
14. Open the 'Home' icon on the left (has a picture of a house).
15. Open the Library folder.
16. Open the Preferences Folder.
17. Locate any items named "CanoScan Toolbox", send it to the trash.
18. Restart your computer, then empty the trash.
Once this has been done, we will reinstall. To get your CanoScan LiDE
60 operating on your Mac, please follow these steps:
1. Visit Canon's website at: http://www.usa.canon.com/cusa/support
2. Just below 'Please choose your product from the menus below:',
select your model in the following manner:
2-1. Under Product Type, choose Consumer & Home Office.
2-2. Under Product Family, choose Scanners.
2-3. Under Product Series, choose CanoScan Series.
2-4. Under Models, choose the CanoScan LiDE 60 and click 'GO'.
3. On the Support page for the your unit, click the 'Drivers &
Downloads' tab.
4. Choose [MAC OSX] from the Operating System drop down box.
5. Expand the Driver listing, then click on the LiDE 60 Scanner
Driver, [lide60osx11131en.dmg].
6. Read the License Agreement on the next page, and if you agree,
click on 'I Agree - Begin Download' at the bottom.
7. A File Download box should appear. When it does, select Save.
8. When the Save As box comes up, click Save.
10. Once the download is complete, close all windows.
11. Once the download is complete, go back to the top and click on the
'Support & Service' tab and then click on the 'Drivers & Downloads' tab.
12. Choose [MAC OSX v10.6] from the Operating System drop down box.
13. Click on the CanoScan Toolbox, [cstbosx5014ej4.dmg].
14. Read the License Agreement on the next page, and if you agree,
click on 'I Agree - Begin Download' at the bottom.
15. A File Download box should appear. When it does, select Save.
16. Double click [lide60osx11131en.dmg] to install the scanner driver.
17. Double click [cstbosx4934ej4.dmg] to open the CanoScan Toolbox,
follow the steps to complete the installation.
Once this process is complete, open the CanoScan Toolbox and use the
Save function to test the scanner.

Canoscan LiDE 210 won't work on my macbook pro

Can't get my scanner to work on my macbood pro, OSX 10.8.4. I've downloaded the driver for the scanner and the MP Navigator EX 5.02. MPNav won't even open. LIsts only a few Canon products supported. EXTREMELY frustrating.

I should have clarified I was referenceing the software as Canoscan LiDE 5.0.1.4 for Mac OS X. It appears to be the most current version.
The scanner is a Canon model CanoScan LiDE 600F. After posting, I found and installed the current scanner driver. Same results with a subsequent scan attempts. The preview displays the full picture, but finished horz. image is clipped at the top and shows part of the sprocket holes at the bottom of the frame.
But after teasing the piece of film into the most extream position against the bottom edge of the holder with a toothpick I was able to trial and error some full frame images with minimal clipping. I suspect it is a software problem. Probably some focusing or alignment algorythm
The film adapter is a 13"X4" device that lays on the larger glass, a cable plugs into a port labled FAU and the device engages two magnetic latches to exactly position the film adapter. The adapter itself has a hinged lid and seems to be disigned for a 35 mm strip of film, not an idividual cut frame. The larger scanner lid is double hindged, so it can close over the film adapter when its mounted on scanner bed.

Can CanoScan Lide 20 work with Lion?

Since installing Lion, my CanoScan Lide 20 is not usable - Canoscan Toolbox software no longer opens; downloaded latest drivers and when trying to install, get error message that PowerPC applications no longer supported. Anybody know of a workaround?

CanoScan Toolbox is obsolete. U need to find something called MP Navigator EX. That works here with canon scanners.

CanoScan Lide 210 Help

Hi,
Just purchased the 210 to go with my new iMac 10.9 OS and are having problems. I don't have a CD drive.
I downloaded from the Canon website the following,
ICA Driver Ver.3.1.0
LIDE 210 Scanner Driver Ver. 17.7.1a
Software : MP Navigator / Quick Menu / Solution Menu
Documents scan okay but nothing happens - can't print / e-mail / PDF etc.
I've obviosly mucked something up and not being tech savvy I would appreciate someone pointing me in the right direction.

Thank you, Paul, for looking into my issue. The canon support person did have me to install the latest ICA driver from their site and it didn't help the problem. I really like the canoscan lide 210, even using it in mp navigator. I would love to be able to use it from image capture & preview and print & scan...without having to either restart the computer or unplug the usb cable, or as I mentioned, using the scanner in navigator first, and then switching over to the other applications, it works fine. For me, the issue is the scanner is D.O.A. after coming out of sleep. I removed the twain driver to see if the image capture would work on the ICA driver. No good. I truly believe that this scanner will just not "wake from sleep" in the aforementioned applications. I asked another Canon tech guy if I got a "powered" scanner would it work after sleep on my iMAC lion 10.7.3. He just didn't know. My hp printer works fine, after sleep, from its usb port, using the hp driver. My scanner works fine, after sleep, using the mp navigator driver, on the usb port. My problem is the ica driver won't work on the usb port for my scanner, after sleep.
Thank you again, for looking into this issue. Hopefully, you will have a good suggestion, even if it means purchasing an epson scanner, which is AC powered.
Ronnie

Numbers says to update but when App store opens under mtn lion says not updates needed.

Numbers, Pages and Keynote all say I need an update when I open but none of them will activate the download. Now that mtn lion is installed it immediately open the store and checks. So Im thinking is Apple wanting us to repurchase to get this update so its store savvy? If not how do I update?

In Mountain Lion Software Update has been "rolled into" the Mac App Store. Choose Software Update from the Apple menu just like you always have & the Mac App Store will launch. Depending on what you have tihat needs updating you may see two sections in the MAS window. This is a screenshot of my updates earlier today when I had the iWork update under Software Update & some Mac App Store-purchased apps that also needed updating.
But, as always, if you're not running the latest versions of the iWork apps installed from a retail box or the downloaded trial & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. If you installed from the downloaded trial or the retail box, they must be in the iWork '09 folder in Applications. That iWork folder must be named iWork '09. If it doesn't have the '09 Software Update won't find them & the updaters won't work.

Since downloading Mtn.Lion my epson printer doesn't work correctly & the entire system seems to be slower plus my iMac now disconnects from my wifi every time the mac sleeps. Can anyone help me with these issues?

I am having problems with my Imac (approx 1 yr old) every since I downloaded (from the App.Store) Mountain Lion. I am a working mom with 3 toddlers.....I have very little time to work on the computer which I primarily use for photograhpy needs. I am not computer savvy enough to figure out how to "fix" the new issues/problems and am frustrated. I am hoping someone can help me........
Issues just since downloading Mountain Lion:
1) My Epson R2400 printer is not printing properly. It wouldnt print at all from CS5 the first 2 days. Then just started printing. The prints aren't nearly as good as they used to be. I just installed Photoshop Elements 10 and have been able to print but the prints are just awful. I printed a test page and it was perfect. I've triple checked the settings in the print dialogue box to ensure the correct paper is chosen, etc. I've never let the printer manage the color before but it is the only option that gives a mediocre print at best.
     I've gone to Epson.com.   It says to update driver through Apple for Mtn. Lion. According to my computer I have no updates. Printer is connected via USB. Changed the ports, turned printer on & off. Emailed epson & they said to reset the print queue, which I did. Restarted the IMac Still no luck. (The error message I got when trying to print from CS5 is "filter failed." But, as stated before it just started printing today as I was typing this.
      I print out pics quite a bit and it seems the only time I have ever had problems is when I upgraded the OSX system. Why is that?? When I upgraded to 10.7 is when I first realized my print quality went down.
2) Now every time I "wake" up my computer it has become offline and has to go through the steps to reconnect to my wifi. Never did that before Mtn.Lion. I purchased the Airport Extreme Dec 2011. My computer was always connected before the update. Now I have to scroll down & pick my network & wait for it to connect before proceeding.   I double checked preferences and it is set up to check for updates automatically. What is that about??
3) It just seems that my system overall is slower. I love my mac but I am frustrated because I don't have the free time needed to do all this problem solving. I just need it to work properly when I have a few minutes to work on a picture. I imagine there are other issues, but these are the only 2 areas I've focused on since the upgrade.
I've read different views/feedback on Mtn Lion but haven't come across the printer issue or the wifi connection issue.
Can anyone direct me towards a solution? I really appreciate it!
T

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

Problem creating Mtn Lion Recovery partition on external drive.

USB external. Newly erased, three partitions: one 2GB for Recovery HD, other two backups of my old SL machine and new ML machine (Mini). Those work and their respective machines fine. Drive seems OK.
    Used Recovery Disk Asst v. 1.0 to create Recovery HD on the small partition while booted into 10.8.2 (the brand new Mini). Factory installed Mtn Lion Recovery HD exists on internal drive and it works— when starting with command-R or command-shift-R, not with Option key.     Install of Recovery HD to external seemed to go fine and doing a "diskutil list" in Terminal showed both the internal and external Recovery HD's, properly named as such.   However, when restarted with Option down the recovery partition showed up named the same as my internal— at that point "Macintosh HD" but later when I changed the internal's name, reinstalled the Recovery HD, and restarted with Option key the recovery partition now was named the same as new internal drive name.   Both times choosing the recovery partition resulted in booting into internal drive.
Was wondering if anyone had a similar problem— and found solution/reason.   Apple Tech Support particularly not helpful/knowledgeable on this subject.

Hi Baltwo
   Really appreciate the help.   Many thanks.     Finally seems to be working.     Not sure exactly what worked but in case you're interested I'll give you a, hopefully, short summary:
Using DU (after copy/paste of the command you wrote above into Terminal) I cloned the working internal drives RDH to the partition for it on the ext.   Failed— still seemed to work as almost an alias pointing at the boot volume on the internal.
So, erased the external again; didn't partition, did a reinstall of ML from DU while booted into RDH of internal. Then started from that new ML partition on external and let Setup Asst migrate everything over from the internal to keep Users/Permissions from being a problem.
    When that finished I tried to restart w option key.   Got a recovery HD that was called exactly that but, again, booted into internal boot drive.   Booted into internals RHD just to make sure it was OK and it was.
   For whatever reason again restarted w option key.   This time I got four choices: the boot volume of internal and external, an ext volume called Recovery HD (the trickster), and another volume called Recovery 10.8.3.   Something new— and, as Bill Murray said in Ground Hog Day, "anything new is good."   So I tried booting into that new RHD 10.8.3. (Note, I'm still running 10.8.2 on boot volumes.)
And that worked— booted into Recovery HD but no way that I could figure to see for sure that it was the Recovery HD on ext vs. on internal.   I think I need to activate the Debug menu on the RHD DU so I can choose the 10.8.3 recovery and see if I have the option of Repairing the disk or it's greyed out. If greyed, then proves I'm booted into it.   Might be a more elegant way to see that but it's the one I know.    Still, I assume I was in the RHD on the external.
Then made a second partition for the old mac's backup and that initially resulted in the boot volume of the internal backup not be mountable but after a restart or two testing the two RHD's, the mini decided to see all the volumes and things are, for the moment, copacetic.
Hope that wasn't too long and boring.    From my experience and reading on the 'net, my general sense is that there are a bunch of variables that all have to be right for this process to work. Probably less is more and just installing ML on a disk by itself will be the most reliable method, if most wasteful of data storage.
Regardless, couldn't have done it without you, baltwo.   I don't use this forum enough to know what the etiquette and protocols are but I marked all of your posts as useful, which they were, and, finally, as solving my issue, which they did.
Thanks again

How do I get my apps back after uninstall of Mtn Lion?

After I uninstalled Mtn Lion my Migration asst won't recover certain applications from Time Mach backup.
Says apps on Time Mach drive are 'newer' unreadable versions. How do I recover?
Apparently I should not have let the Lion anywhere near my white iMac. Whoops!
White iMac / OS 10.6.8 / Gdrive external for Time Mach backup

You will have to obtain earlier, compatible, versions of the applications either from an older part of the Time Machine backup or from the original sources.

Macbook Pro won't see CD as boot option

I have tried using two different OS install disks but the computer won't see the disks as a startup option. I have tried booting by pressing the option key after the tone and the C key. I have gone in through system prefs to choose the CD to boot from but it doen'st show up there. The disks do show up on my desktop and I can open the folder etc... Also, I can use the drive for watching movies and stuff. I have no idea why this won't work and it's honestly driving me up the wall.
The OS is 10.6.8 and I have tried the install disk for OSX Tiger and OSX Mountain Lion (I think). One is black and one is gray if that helps.
The orginal problem is resetting my admin password because I cannot figure out what I put in originally. Please be clear, I did not steal this Mac. I just don't remember what I put in and my hint makes no sense.
I have called Apple support but they want 50 bucks to talk to me and I can't see paying that. Honestly the request itself ****** me off.
I don't know what else to include but there you go....help?

SachaRathe wrote:
I don't have that disk and all online forums including ones on this site say to use the disk closest to your OS and you'll be fine. There has got to be a way to fix my issue without paying a bunch of money.
Why not?
Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html

IPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

iPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

At least to 10.6.8. You must do this to upgrade to Mountain Lion.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

CanoScan LiDE 600f - failing to open driver

Can't get new scanner to work, either by buttons or CanoScan Toolbox. I keep getting the same message, "Failed to open driver." I can scan a single page as a TIFF image through Image Capture, so I know the scanner is working.
I'm running Tiger 10.4.8 on a PowerBook G4. I cannot find the scanner in the Printer Utility drop-down menu - might this part of the problem? I previously had an HP multi-function installed, but have searched and removed these files and drivers. I tried reinstalling the CanoScan driver from the CD, and installing the driver directly from the Canon website. I have confirmed the scanner is a Mac supported model, and I'd rather not return it!
Any ideas out there? I'm perplexed! Thanks!

Okay. Downloaded the driver and ran the installer. There is certainly a lot more files that are added compared to my 3200F. I also didn't know that PhotoStudio and OmniPage were installed, which I didn't select as I did a custom install.
The folder CanoScan Toolbox 5.0 is created in Applications > Canon Utilities. A log file is also created showing all the files that are added. Thankfully they are all located within this folder (some are hidden so all you see is the Toolbox application and the readme files) so deleting the Canon Utilities folder will be all that is required. I suggest this is the first thing you do.
Next, there is a .dat file located in ~/Library/Preferences/Canon/ScanGear/CanoScanLiDE 600F. There is nothing else here so it is safe to delete the Canon folder. You should also see CanoScan Toolbox 5.0 in the same Preferences folder. Delete this folder also.
The last thing to delete is the data source file. Open Library/Image Capture/TWAIN Data Sources and delete the 600F.ds file.
Restart your Mac and run the installer again. You could choose custom and deselect PhotoStudio and OmniPage, since we didn't delete those applications. Once the installation is complete and you have done the restart the installer forces you to do, open Disk Utility (located in Applications > Utilities) and select Repair Disk Permissions. This should repair any changes the installer has made. Once this is complete close Disk Utility.
Hopefully this should be all you have to do. Without the 600F I cannot check this too much further. If I select Scan in the Toolbox, I get the same failed to open driver error as you are. But I also got an error about the scanner not being present when I first tried to open Toolbox. So, I won't make too many assumptions just yet...
Good luck and let me know how you go.
Regards,
Paul

Mtn Lion won't see CanoScan LiDE 90

Similar Messages

Maybe you are looking for