MTO - For logistics purpose - Effect in COPA

Hi,
We have a MTO scenario maintained for logistics purpose. A production order is created with reference to a Sales Order, wherein 2 or more FG are fabricated. These FG are issued to sales order as special stock. Consumption of FG is posted at time of such issue.
Header material for the production order does not have any cost.. neither MAP nor Std cost as the inputs for such material are variable.
Sales order is created with reference to this header material. Sales order costing is not done.
Now we have to implement COPA, how would the COGS can be captured for this sales order. VPRS condition cannot find anything.. neither Valuation as no std cost estimate
Please give your valuable suggestions.

Hi,
the given situation is just like another Make to stock scenario except that it will have products tracking to
Sale Order.
in this case, you must have Standard cost estimate being done and released to Material master. without that, the process does not completed.
In this case only VPRS condition type need to carry the cost to COPA (nothing else).
Please change the understanding of the people about this scenario.
Best Regards
Surya

Similar Messages

HT1229 How do I reduce the size of photo in iPhoto? The size of my imported photos are 2 - 3 MB and for my purpose I need 200 - 400 KB. Any suggestions appreciated.

How do I reduce the size of photo in iPhoto? The size of my imported photos from my camera are 2 - 3 MB and for my purpose I need 200 - 400 KB. Scanned copies of older photographs with a size of 100 to 500 KB work very well. Any help is greatly appreciated.

File -> Export and make your choices in the Export dialogue.
Jpeg Quality and Size will have most effect on file size. Note that 'Size' refers to the pixel dimensions of the photo.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

Use of Apple System Voice for commercial purposes.

I apologise if this is posted in the wrong category (I could see no other alternative however).
My question is:
I'd like to be able to make use of Apple's In-Built Voices for both web content and e-book use (recording samples of phrases and including them with their corresponding written content; I would not be selling the voices as part of a software package -not that I would even know how to).
Any help would be greatly appreciated, or perhaps a point in the right direction to 'free-for-commercial-use' voices elsewhere online as I've had a hard time finding anything, and when I do the terms and conditions seem incomprehensible to me.
Many thanks for your time, Matthew.

Curious question...
If, say, I were to create a smash record that sold a few million copies using just the tools in Garage Band, would that be considered legal?
How is the sample of a voice different from the sample of a drum? Aren't they both tools for an artist to use?
Since I work in the Advertising production business, I can see the day when voice modeling takes the place of real voices, much like samples of instruments have taken the place of real instruments...
I'm no attorney, but I'd bet you could argue a good case that using the voices for commercial purposes would be legal.... that is, if it isn't legal.

Any new ideas or suggestions for flattening layer effects without changing appearance

Hello all,
I've been doing a lot of looking around for ideas on how to make my work flow more simple. I regularly run into an issue with layer effects when they are flattened and have been unable to find any good solutions but was wondering if any new developments have come up with the newer versions of Photoshop that I am somehow overlooking?
My main issue is that when I flatten layers in sections or groups (i.e. flatten only 2 or more layers together in a larger composition but not the entire compostion), layer effects with blending modes often flatten strangely. I particularly notice this with drop shadows as I often use a color other than black, usually a very dark shade of the color that is applied to the element the shadow is overlapping. To me it gives it a much more realistic and natural look. When I flatten a layer I notice that it appears the multiply mode is stripped from drop shadow FX unless they are flattened with the nackground element, so if I used a dark blue for example, once flattened the shadow is now a distinct blue shade that appears to be in normal blending mode. I can set that drop shadow layer to multiply to restore it but then I have to keep the drop shadow element on it's own layer seperate from the body of the other flattened content otherwise it inherits the multipoy mode as well of course, which still leaves me with an unwanted layer to deal with.
My curreny solutions range from hiding all other layers and merging visible, which works from some things but not the aforementioned drop shadow issue, I will also keep things that just don't co-operate on their own seperate layer, like the drop shadow and just leave them be if I can. In cases where that isn't an option I will even hide all other layers and comp the portion of the PSD that needs flattened to a seperate TIFF or PNG and import back into the PSD. Sometimes this will work around the issue and make everything interact as desired. It's a lenghty affair though that involves mental acrobatics every time to devise a suitable workaround that I can use for my purposes.
The reason I need to do this often is because I work for a web development company as the designer. Once the design is done sometimes I will do the slicing and prepping for web (not an issue when I do this because I can leave everything as a PSD). When other team members like the web developer need access to the graphics files though, they use Fireworks which means I need a layered PNG so they can slice as needed with the software they are familiar with while maintining transparency where needed.
I know some will say just to use Fireworks then but that isn't a desireable solution to me because I find Fireworks very limiting on the advanced Fx and graphic manipulation. I agree that Fireworks can be very capable and can do very nice things when you're thinking of the design of the entire site in general, but it usually can't do the advanced fx and manipulation I like to use for the "eye candy" portions of the site, especially when you are using mutiple Fx on a layer with their own blending modes. I find it more of a hassle to build a general site in Fireworks and import elements from Phoroshop. Keeping track of proper sizing and constantly loading placeholder background images to photoshop for reference isn't for me!
I have a pretty decent understanding of how the layer flattening works and how the blending modes function (like the fact you can't have mutiple blending modes on a single layer, thus many of the issues with layer Fx blending modes). I am using CS5.5 Design premium and am hoping there have been some advances in working with this type of thing. I know that if I could flatten the drop shadow layer with the layer it overlaps that would solve the issue nicely but this is seldom possible on websites where you have fluid areas that need to change size and the image element with the drop shadow may not always be in the same place on the site background.
It would be awesome if, since you have the ability to apply blending modes to individual layer effects, if Photoshop could have a setting to somehow flatten the layer effects and layer in it's own self containted process and then place the flattened layer within the the PSD as if you imported a transparent image like a TIFF or PNG. This is basically what I do on the extreme side of tihngs manually when needed. It would be great if there was a way to automate that type of functionality.
Does anyone know of any new or good method to deal with this type of thing? Sorry about the long post, I was trying to be as detailed as possible as I know it's sometimes easy to misunderstand what someone is asking with this type of question. Thanks to everyone for taking the time to read/respond!

Hi Noel,
Thanks for the reply. The reason I need to do things this way is because of the workflow at my company. I need to be able to convert my photoshop PSD files in Fireworks and have the layers behave predictably. Trying to open a PSD file as is in Fireworks, while keeping the layer flexibility intact usually creates all kinds of chaos, ranging from Fireworks flat out ignoring some layer effects to drastically changing them. I assume because Fireworks way of intrepreting some setting numerically is different than Photoshop and because Fireworks doesn't even have some of the effect properties at all.
The web developers need to have layered PNG files so they can slice re-slice and move elements around as needed white they develop a website. They need to maintain transparency on the seperate elements of the website mockup so that they can reuse and move elements around as needed. At times I end up doing the CSS layout on a site and in those cases it doesn't matter becuase I can work straight from the PSD and export elements straight to PNG files etc as needed. It's when I need to provide the development team with a Fireworks PNG version of the website mockup that I have these issues.
For example and to clarify, I may have a website interface designed that has several fancy buttons or a header element with drop shadows on them or that overlap a background element in some way. If I am doing the coding on the site I can simply hide all other layers than the releveant ones, flatten visible to maintain transparency, save for web etc and I have the element complete with a nice drop shadow ready to drop into the code. If the developers are doing the slicing and layout though, they don't know how to use Photoshop (and aren't going to be learning anytime soon) but they do use Fireworks... so they want the site in fireworks, complete with the ability to hide background elements or other parts of the site that may be in the way of making the proper PNG for that button or other element that maintains transparency AND keeps the drop shadow, the proper color and transparency as well.
What typically happens if I don't flatten each element of the site design before importing into Fireworks is that it will look very different in Fireworks, but being web developers (lol!) they don't notice or maybe even care that something looks weird or appears to be missing a shadow or other effect. Then once the site goes live, the client DOES notice it and I end up scrambling to fix the issue. That usually means going back to the PSD in a rush and trying to flatten all the elements anyway to convert to a nice Fireworks PNG so they can recapture their slices, or taking the slice they used on the website and pasting it into the PSD original so I can make a direct match and converting the element myself after the fact.
In order to avoid these work flow issues and embarrassments I have taken to flattening each individual element (i.e. a button and all of it's effects) of website GUI to ensure Fireworks can't fiddle with it on import. I can then give the web developers a PNG they can slice easily but with all the important elements still completely seperate from one another. If they hide the layer that is the shopping cart button for example, they are going to be hiding the button and it's drop shadow or glow or any other effects. That way it can't be messed up by Fireworks or a developer. With buttons in particular I can't just include a portion of the background where the drop shadow would be becuase that button could end up anywhere on the site in the end. One of the features our business offers clients is a fair amount of flexibility on the CMS side of things to move elements around and create new sections of the site so I need to keep most elements as felxible as possible, preferrably without giving up quality of the artwork.
I feel like I have a fairly solid understanding of why the layer effects act the way they do and how they interact, even if I don't understand fully the math that makes them do what they do. I guess I was hoping that the increasing power in the CS suites, especially in 5 and 5.5 might have made some new work around possible, or that they might have added some feature buried in the menus somewhere because it's not that practicle for many users. I have several ways to work around these issues now, but they are manual and cumbersome, I was hoping there might have been an action script or feature to automate some of this.
I think a really cool thing to be able to do would be to be able to select some layers and have Photoshop copy them and paste them into a new document with their layer styles and all intact, flatten that document with transparency intact and then put the new flattened file back into the original document in the same location on the artboard as a new layer. This is essentially what I do when I hide all the other layers, merge visible and save as a TIFF or PNG and then copy that new file back into my full PSD document. I still experience some color shifting this way but usually not as drastic as when I try to merge directly in the full PSD. OR if that can't work, even better would be to somehow have the effects be able to "float" with the actual photoshop layer, almost like sub layers of that layer, so that each one could have it's own blending mode (and individual masks for each... that would be awesome!) and you could flatten them together somehow when needed and maintain color tones etc. Don't know if this could work though since I don't know what the limitations of the math process that combines the layers are. I would imagine some of it it would be possible, if not worth their time, since smart objects open in their own document window when you edit. I would imagine that some code work on the back end might be able to be applied using a similar method to give extra flexbility of some layer effects in Photoshop. I would love it, I know that!
Hopefully there is at least as faster way if not an ideal work around. It defintely adds to the development cycle of a website to have to go through this step. It's also at a point in the development cycle where the site has been approved and there can be added pressure about why they development team still has to wait on a design that has already been OK'd and should be ready to slice. I have gained understanding with my boss about this and it's worked out OK for the most part, but it would certainly make him happier if I could eliminate that extra step, or reduce the time needed. On a complicated website I might lose half a day of work or more sorting out the various site elements and figuring out how much I can flatten and how and what order to break effects off their layers to maintain appearance. I have tried Fireworks several times as a native solution, but ultimately I feel very restricted by Fireworks and often can't do what I had in mind, although it has gotten better. Also on a psychological level, Fireworks "working with basic shapes" method of desigining a website tends to steer me down that mental path for some reason and I always end up with sites that look much less fluid and organi, much more boxy than when I design in Photoshop. One of our companies selling points is that we design sites that break away from the boxy and simpler web 2.0 look so Fireworks is not really a consideration for me at this point. Thanks again for the help and any respones!

Soundbooth CS4 - Audio Content still usable for commercial purposes?

Dear all,
I know that Soundbooth is no longer (officially) supported, but I wanted to double check and make sure that the CS4 Soundbooth scores and sound effects (referred to as "Audio Content" in the "CS4_LICENSE AGREEMENT FOR SOUNDBOOTH AUDIO CONTENT" located at http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/legal/licenses-terms/pdf/CS4 _LICENSE%20AGREEMENT%20FOR%20SOUNDBOOTH%20AUDIO%20CONTENT.pdf) are still usable for commercial purposes.
In other words, I would like to make sure that I did not miss any communication from Adobe about terminating the license as mentioned (as a possibility) at article 2.7 (“Adobe may terminate this license by notifying you that your continued use of the Audio Content is prohibited”).
Could you confirm that the “Audio Content” is still usable for commercial purposes in old and new projects?
Thank you in advance for your help.

ThomasThue wrote:
.. and the section(2M) that explained this matter back then has been deleted,...
.. is now 2nd paragraph in §2G ...
just as a reminder:
this is a user2user board, I'm NO Apple representative, nor is the author of the user tipp!
A forum chat doesn't replace professional support by a lawyer ...

Need to add Hard Disk for backup purposes

Hi all,
I'm new here and really new to Netware. I'm just beginning to get involved with Netware Servers (V 6.5) and am trying to add hard disks to a server for backup purposes. I have two SCSI hard disks to add to this server and wish to name them backup_1 and backup_2. Using the Backup Exec software we have a site license. I want to be able to do an incremental backup Monday thru Thursday and a full back up on Friday on each disk alternating out the disks weekly with one of the disks being off site while the other is in service.
I can add the new drive in a Hot manner and then must go through configuring the disk.....during the configuration I'm asked if I want the disk to be a part of a pool or something to that effect. What do I want to do here?
Actually I'd like to know just what is a pool technically? I've got several books on Netware and none of them has painted me a clear picture of just what a pool is.
I'm kind of excited to be learning about Netware I hope you all can bear with me as I stumble through this.
Thanks so much!!!

A pool is a structure between a volume and a partition. It allows, for instance, you to have multiple volumes in a pool, each of which can dynamically grow to use unallocated space within the pool on demand.
Novell Documentation
In your situation they are of no extra use to you, what you do is create a partition on each of those new disks, and create a volume on each and let it (I assume you are using NSSMU on the console) automatically create an underlying pool for each of those volumes.

Using multiple apple id's for different purposes

We are a family of 4 with numerous devices. Here's the setup we've been using to manage different aspects of our apple life!
Each of us has an individual apple id, which we use on our individual devices for storage/backup, photo stream, facetime, calendar etc
We have one apple id, used on all devices for all app store/itunes purchases
We entered this id on each device with everything turned off except "find my iphone". This way we could be logged into the find my iphone app with one id and be able to see all our devices.
This has worked really well for us as a family. Well, yesterday my kids updated their phones (one 5 and one 4s) to ios 7. I have not done it yet. It does not seem to allow for the above setup, specifically where "find my iphone" is concerned. When I enter in that specific apple id as an additional icloud account, it doesn't offer the option of find my iphone. My ios 6 device says "only your main account can use photo stream, documents & data, and backup". Their device adds "find my iphone" to this list.
Does anyone know if this is a specific change apple made, or something that went wrong when initially setting up their updated phones.
TIA!

Thanks for your reply. But what I don't understand is, can I no longer have multiple icloud accounts, to be used for different purposes? Like I said, we have been using one apple id/icloud for storage etc and one for find my iphone.

I buy adobe creative suite for teachers and students about one year ago but now i'm not longer a student. Can I still use this programs legally for commercial purposes or do I have to buy some upgrades or something like this? Please help

I buy adobe creative suite for teachers and students about one year ago but now i'm not longer a student. Can I still use this programs legally for commercial purposes or do I have to buy some upgrades or something like this? Please help

The license did not have use restrictions Licenses and terms of use | Adobe
BUT... when your one year Education account ends, I do not think you will be able to renew at the Education rate

Have CS5 and CS6. Need to reduce size of file from 6Mb to 2 Mb for contest purposes without losing original

Have CS5 and CS6. Need to reduce size of file from 6Mb to 2 Mb for contest purposes without losing original

Just save the document to a new jpeg file name using a lower quality setting or re-size the image down in size the save a high quality smaller new jpeg image.

I am trying to edit my website which was composed in iweb. I have my website saved on my hard drive. When I open iweb, I can't seem to load the website folder into iweb for editing purposes. Anyone know a quick solution to this?

I am trying to edit my website which, was composed on iweb about 2 years ago. I have the website stored on my hard drive. When I open iweb, I can't figure out how to load the website into iweb for editing purposes. Any help would be greatly appreciated! Thanks

You need to migrate to a modern, supported webpage development application and leave iWeb behind. It hasn't been supported for 2 years now and was behind the curve feature wise when it was dropped by Apple.
One app that many have migrated to because it is very similar to iWeb in the GUI and features is Everweb. It has a demo version that you can try. Text and photos from you current published site can be copied and pasted into Everweb to help the migration over.
There are other possible candidates. Just search the iWeb forum for "iWeb alternative" or "iWeb replacement" to get a list of topics discussing them.

I am having trouble trying to get my address book from my mac (just downloaded Lion for this purpose) to my 3G ipad. Set up an icloud account but still confused! Please help !

I updated my mac with os x Lion so that I could accomplish moving my address book from the mac to my new IPad 3G. I also set up an icloud account for this purpose, but I *still* cannot figure out how to move my address book from one computer to the other. When I'm on my mac and try to use bluetooth to export the address book, I'm able to find my ipad but I soon get a message that it does not support the necessary services. I have no idea what's going on and would appreciate any advice. tks in advance, Sarah

blacksheepfibers wrote:
I updated my mac with os x Lion so that I could accomplish moving my address book from the mac to my new IPad 3G. I also set up an icloud account for this purpose, but I *still* cannot figure out how to move my address book from one computer to the other. When I'm on my mac and try to use bluetooth to export the address book, I'm able to find my ipad but I soon get a message that it does not support the necessary services. I have no idea what's going on and would appreciate any advice. tks in advance, Sarah
The address book syncs via iCloud, not Bluetooth or iTunes.
You upgraded to Lion so you could use iCoud.
On the computer. go to Apple menu > System prefs > iCloud.
Sign into your iCloud account.
Tick everything.
This enalbes the se items syncing to iCloud.
On the iPad, Settings > Mail, Contacts, Calendars.
Create a new iCloud account.
Sign in with the same AppleID as your computer.
Settings > iCloud and turn everything on.
BAM!
That is all you need to do.
Your contacts (and all other checked items checked) will sync between computer and iPad.
No need to use iTunes

I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library?

I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library? I assumed that like the videos in iPhoto, I would be able to access the videos in Aperture through iMovie. Come on Apple! I am starting to get frustrated with your products here. And this is saying a lot when I have been using and loving apple products for the last 4 years.

Hi. My camera is a Canon 600D. And yes my videos are stored in the Aperture library and they are not referenced. Even then I tried to select all the videos in Aperture and clicked 'consolidate masters' and there was a messge that said all 'none of the files are referenced',... so they didn't need consolidating.
I also tried preferences> export> external video editor > choose > iMovie. And then right click on the video to edit with imovie. Even then the video didn't show up in iMovie. It seems like the only option for me is to import the videos directly to iMovie which means there will be two versions of the same file stored in my computer eating up space.
APPLE. What are you doing?

HT204053 can i set up a seperate icloud for my ipad? My daughter bought my ipad, its wifi, not through a phone co. however im on her icloud and need my own i cloud for work purposes. I have my own apple id. How do i get off her i cloud and on my own?

My daughter bought my ipad 2. She manages all our apple devices on her computer. She purchased a i cloud package for her phones but it is showing on my ipad. I have my own apple ID now, and I download apps and songs from Itunes all the time on my own id. However her I cloud is on my ipad. I need my own I cloud for work purposes and when I try to change the apple ID in setting for her I cloud its grayed out... How can I have my own i cloud on my ipad. Originally when she bought the Ipad, she set it up on her ID, She used the ipad for awhile before she got a new one. I am using this one now. She can track my ipad if I loose it. It still shows as one of her devices. Can I get my own I cloud?

Yes of course. Jsut go to "Settings > iCloud" delete her account from your device and then start creating a new one just for you.

Transfer old Apple ID purchase info to New Apple ID for iCloud purposes

Transfer old Apple ID purchase info to New Apple ID for iCloud purposes
I currently have an apple ID that i have used for many years of ABC. This will hold all the apps and songs etc that i have purchased over the years. So i can currently download apps from app store using the new "purchased option" from the "Cloud".
I have just set up and wish to make a new account my main account for iCloud and all purchases. This is XYZ . How do i get all the purchase history and account actions from ABC apple id, to map across to the new XYZ apple id.
My objective is to log into my iphone on itunes, app store and icloud using the new XYZ apple id, but still be able to view and download any and all previous purchases held against the ABC apple id.
Can I/Apple port this account over so all history of purchases on ABC apple id, is now held against the new XYZ apple id.
Thanks

RE all those that say it cannot be done or why do i want to or need to...
When my phone (on iOS 5) had the old/main apple ID logged in and used, the iCloud page where you can enable iCloud for apps, mail, notes etc - it would not allow me to turn on mail or notes for iCloud. Said i needed to create an iCloud/Mobileme address to use these features.
When i created new mobile/iCloud account today it worked fine for all iCloud options on my iPhone. Also, the emailed address for mobileme/icloud was more to my needs/liking.
The new mobileme/icloud ID created today cannot have my main email address added to it as it says my current/main apple id is that email address.
Any suggestions?

I am trying to use Find My Phone for people to follow me on the NYC Marathon next week. Is there a way to set up a temporary User ID and Password to give out to people for this purpose? I would obviously want to delete that log in info after the race.

I would like to use Find My Phone for friends and family to follow me during the NYC Marathon next week. Is there a way to set up or temporarily change my User ID and Password for this purpose?

New York Runners has an app that is specially designed to do exactly that. It's (or will be) available in the App Store.
http://www.nytimes.com/2011/10/27/sports/for-new-york-city-marathons-fans-a-cell phone-app-to-keep-in-touch.html?ref=technology
You might also look at apps like RunMeter. It will let you send updates by email, Facebook or Twitter. Glympse is another app that, though not designed specifically for runners, might also be useful.

MTO - For logistics purpose - Effect in COPA

Similar Messages

Maybe you are looking for