MTO Process MRP Problem

Hi,
i am working in MTO Process. Bill of material all Created. MRP Run. after some material added in bill of material . second time MRP RUN.Plant order not created for second added material.
what is the problem .
plz, Advise me.
Regards,
JJ

Hi Uday,
New material maintained for MRP View. and Check it .first mRP running and Added the New material.second time MRP run .
But not Plant Order created.
Edited by: JayamJevan s on Jul 16, 2009 1:50 PM

Similar Messages

MTO Process : Values shown in Balance sheet

Dear Experts,
One of my client using MTO process in PP. In MTO first create Sales Order. On base of Sales Order then create Production Order. After complition of Production order & at the time GRN of production Order Raw Material Cost & Production cost goes to Sales Order. GRN was a Non Valuated. No account document generated.
Query is, in MB52 FG material showed zero value. All sales order not convert to revenue. some FG material lying in FG storage location. At the time of prepare Balance sheet where we will show these FG material cost which already attach to sales order.
Pls help me to solve this problem.
Regards
Pankaj mishra

Hello
In MTO process - first creation of sales order
                             ru the MRP (md02)
                             cration of process oders ( md04)
                             convert production order
                             goods issue to cost centre against production order
                              Do the GRN of finished product
                              check the accounting views of finished product.
if you defined all the accounting views properly then system automatically valuated the materials.
Laxman

Process chains problems : Working every day with error (red)

Hi All,
I have a next question, about process chains problem.
When I start my process chains immediate, then working without errors, but I want this process chains work every day and chainged properties, selected date/time and periodicaly (every day) but now it work with error.
How to I find problems? What are yours offers?
p.s. I see logs, but every day have diffence between errors.
Regards,
Mahir M. Quluzade

HI,
just check the time which you have given is OK or is overlappintg with some other job which is locking your table in process chain
or is colliding with attribute change run
or it fails because of lack of background processes.
There could be numerious reasons and you need to analyze the log for this.
But as you said the job is failing everday for different reasons..try to find the most common errors and try to remove it or mention that here.
Thanks
Ajeet

One Sold to party and 250 ship to party (MTO Process)

Dear Experts,
Please provide me the solution with your valuable experience.
Issue is: We are working on MTO process. and I am working in SD on sales order.
issue is here that I have one SP(Sold to party) and many ship to party. I have created 250 Ship to party under one Sold to party in XD02 partner function . But now what we want that, we want to make single sales order and want to distribute same Finish Good to different parties.
Example: Making SO: 1000 with one SP and One SH and Finish Good is FG0001(Same Finish Good we want to distribute into different parties). Finish Good comes Bit n pieces and when we do availability check then it is done with wherever amount of Finish Good we got. First time it is ok and send to one ship to party with delivery now again we got some Finish Good and doing availability check but this time again the ship to party is same but we want to change it for different ship to party with in single Sales order.
Please provide me the solution for this how we can proceed with single sales order.
Thanks for your time.
Smith

Thanks Ragu,
Issue is
One Sales Order(MTO) suppose quantity is 100 and now I am doing delivery 20 with 5 items each from sales order item level(Changing SH every time at item level with WRT quantity acc to SH, delivery is coming fine.) Now We have to apply postal charges on each delivery.
Postal charges depends on weight and the distance of items that are packed in case or in Boxes.
Example: First delivery is of 5 items and the weight of 5 item is 100kg after packing now delivery guys tell the charges wrt to distance, if they are sending via Speed post then cost will be 100*5 (1km per 1RS so if distance is 5km then charges will be 5rs)=500rs
Now this 500rs we want to add in our billing per bill or collective also like total = price +500 should come.
Please suggest me how should i configure this step by step.
Thanks
Smith

MTO Process

Dear Guru's,
I am running MTO scenario for a plant. Maintained strategy group for finished product as 20 & for raw materials as 70. The indiv / collective requirement for FG is 2 & for RM is 1. As per standards, the stock for raw materials should be under particular sales order which means system should not consider plant stock.After running MRP throgh MD50, Purchase requistion got generated for raw materials, But, when converting the planned order to production order for finished product, system is giving message as " All materials are available". As system should not consider plant stock, it should raise PR for RM which later will be converted to PO & when the material is received, GR will be done & the stock will be visible under sales order stock. My question is As when the PR for the RM is generated, why is system giving message as " All materials are available" ?
Request you to provide the inputs.
Thanks in advance.
Regards
Kalyan

Hi Kalyan,
With the setting you have mentioned, system will not consider your entire BOM as MTO. Only FG is considered as MTO and the RM is not considered as MTO by MRP (it is preplanning with assembly).
You are expecting - "Raw materials should be under particular sales order which means system should not consider plant stock". This is correct when only strategy 20 at FG is used, but you are also using 70 for RM. Here if you remove strategy 70 from RM and then run MRP then it will give result as per your expectation.
As you are using strategy 70 for raw materials, so system will consider the plant stock while checking availability of raw materials (even if you are using strategy 20 for FG). Because strategy 70 is Planning at assembly level.

Returns in MTO process

Hai guru,s
In MTO process When I am doing Returns Delivery..System showing error like
1.' 0' EA quantity material available.
2. Enter Delivery quantity greater than 0.
From Returns order Quantity also not copying into Return Delivery.
why its happening..any congiguration settings required
Thanks in advance
Edited by: sree sree on Nov 4, 2008 12:15 PM

Dear Sree,
Please check following settings:
T. Code: OVLP
Check whether relevant Item Category is marked as "Relevant for picking" or not.
T. Code: VOV7
Select your Item Category and double-click. Check in Tab: Business Data, whether Field: Returns is marked checked or not.
T. Code: VOV6
Check whether Schd. Line. cat. "DN" is marked checked for " Item relevant for Delivery" or not
Hope, this may resolve the issue.
Best Regards,
Amit

My total process is mto process, all materials configurable materials ,

hi
i am working steal company ,
my total process is mto process, all materials configurable materials , its bases on characteristic , how to configure the r/3 and apo , what is the main parts and settings , how trigger the global atp with based on characteristic , and what configurations
how to create the production order,
i create the 10 sale orders with one production order , how to configure this , what are the settings needs, how to system internal settings
please help him
regards
sankar

Sankar,
It is contrary to forum rules to place email addresses in posts.
Creating a new implementation for APO is not a trivial matter. Most companies will hire a consulting company experienced in such matters to assist them.
However, if you wish to tackle this yourself, a good starting point for documentation is Best Practices. Your business requirements are unclear, but I will assume you wish to configure Global ATP, and I will further assume you wish to implement some kind of planning (either PP or SNP). Here are the required modules:
Connectivity
http://help.sap.com/bp_scmv250/BBLibrary/HTML/B02_EN_DE.htm
Replication
http://help.sap.com/bp_scmv250/BBLibrary/HTML/B05_EN_DE.htm
GATP
http://help.sap.com/bp_scmv250/BBLibrary/HTML/ATP_EN_DE.htm
PP
http://help.sap.com/bp_scmv250/BBLibrary/HTML/S16_EN_DE.htm
SNP
http://help.sap.com/bp_scmv250/BBLibrary/HTML/B06_EN_DE.htm
For general info about GATP, refer to SAP help
http://help.sap.com/saphelp_SCM700_ehp02/helpdata/en/04/5e7237412a5249e10000009b38f842/frameset.htm
Best Regards & Good luck,
DB49

Very strange MRP Problem

HI ALL
I am having a very strange mrp problem and that is
I created a material with all mrp1and mrp2 requirement,created the info record and source list for that material.I created a reservation for that material which in turn created the deficiency when I did the MD04.I run the MD03,as per re-order point and fix lot size two Preqs created( vendor was not shown in the Preqs even though I established the source list for the material?).I change these Preqs into PurOrds and did the Gr.Every thing fine till here all changes happened in material requirement list(MD04).Now I did one more reservation and created the deficiency again and run MD03 again with a message that mrp done but this time when I went back and checked MD04, there is no Preqs shown and deficiency remained same as was before. I did the same exercise on several material and every time I am having the same problem as the 2nd time the Preqs don't show in MD04. Please help me as I check upto my knowledge but unable to resolve this one.

what is the control parameter of the MRP run that you select.

MTO-Process order convertion problem

Dear all
For MTS ; I am able to convert the planned order in to process order (order type PI01)
For MTO: I am not able to convert planned order in to process order (same order type)i got the following below error on create process order screen
"Technical status 000000000000 is not available
Message no. CC852
Diagnosis
An internal error has occurred. There is a data inconsistency. The system cannot find the parameter variant data.
System Response
The system does not allow processing to continue.
Procedure
Inform your system administrator. If the error cannot be corrected, contact the SAP Hotline directly."
Kindly help

I have already created strategy group 99 and assign same strategy group in material master which is having main strategy 40 and alternative 20
wht i did?
I hav created sale order with requirement type KE an then run MRP then i got pl order against sales order.
Now i am traing to convert pla order to process order i got above mentioned error.
kindly help

MTO without MRP

Hi,
We are following MTO scenario in discrete manufacturing without MRP. I am creating the Production orders with
reference to Sales Order for HALBs initially, then system gives message that Sales order is not for HALB material.
I accept that message and proceeding to create Production Order.After creating the Production Orders for all HALBs is it correct to create production order for FERT with reference to Sales Order in which target quantity is displaying
What is the exact procedure to do this MTO scenario without having MRP.
Dilip

Dear friend,
The answer by JH is correct .
with strategy 82 -Assembly procesing with production order.
When you create a sales order for a material which has been assigned a strategy group 82 in MRP3 View for assembly processing, an assembly order i.e procuction order is created automatically .
i.e Creation of sales order triggers the creation of production order automatically..
thanks ans regards,
Girish.

Image processing Manupulation problem!!!

Dear all,
God Morning! hope u all are fine .. i have an issue regarding Image processing Manipulation.
i want to give u all the details.. what i have done so far in java.
i have used third party tool of java called ImageJ editor for image manipulation.i got the source of it i have made neccessary customization to store / fetch the image from my table (Database).now this editor is working fine when i click on open option from menu bar it fetches the image from database and after fetching it put the image on container where one can edit/ modify the image and save it back to the table.
the above proceeds me to display or store the edited image on the database . now i just want to integrate the editor on browser ..
how to call the class file when i click on the link on specified page and also how to pass parameter from jsp page to java class file.??
please help me to sort out d problem
"Thanks and regards"
Jonty

Increasing the contrast springs to mind.
When used to extremes it is sometimes called
'cartoonising'
Suppose your image was in 16 colors, you could
reasonably safely assume at least two are red, two
are blue, two are yellow ect.
With regards an algorithm you are looking to 'round
off' the color values to (my suggestion only) the
nearest 64 or even the nearest 127...
Bamkinjust be careful of that ORANGE color. Orange is a tricky color to define in either RGB or HSB, and is very similar to red and yellow. A little change in either direction makes it difficult to distinguish from one or the other.
my thought would be to try to force your image to only six colors. Then those colors (it wouldn't really matter if they were accurate, as long as they are correctly distinguished) would be easy to identify.
- Adam

MRP Problem

Hi Expert,
I got problem in my MD01, in my plant parameter is set up like this CREAT PURCHASE REQ. 2 and SCHEDULE LINES 2, and my material is a RAW, with MRP type set up as PD, and PROCUREMENT is F, why does when i check in mD04 there are planned order for my RAW material since raw is externally procurred it must be PURCHASE REQ should appear? please explain this to me, what should i do?
Thanks and Regards,

Hi,
Based on the Opening period defined at Schedule margin Key of Material , MRP will creates PR & Planned order.
During the backward scheduling system calcualtes the Opening date by subtracting openning period ( the Number days defined at SMK as openning period ) from release date.
If Requirements date is earlier than the Opening period system will create planned order .
some time is there to convert it to PR.
If requirement date later than the openning period it will cretae PR directly.
Set create pur req = 1 at md01 sytem will create PR always.
Regards
Pradeep

Process order problem in COR2 - Urgent Please

hi i have a problem in COR2.
After creating the process order i TECO Technically complete the same,
and when i save the process order the system just hangs.
When i debugged the code i found that issue is inside the functional module CO_ZV_ORDER_POST - Create/change end routine order.
It does not do the commit work properly. this is in PRD so please help me to resolve this
I checked for other system and the process order gets saved.
What should i do
please help

just compare the function module in both PRD & DEV so that see the difference in the code level or else in the debug mode upto the hanging code level ....
i think it is because of the performance issue .... so need to be   created the index of the table which it gets updated .....
becuase as your FM is for create/chande .... so it will be an big table .... so see it and   do the performace trace and create the index ..
ST05 ,SCI , SM30    .... These are some of the tracscation code for   Code Insecptor , performance trace & SQL trace , Runtime Analysis..
seee if the code is same in both the system   ... then it is confirmed as   performance issue ....
if the code is different   then it is patch level issue ... tell to basis to check the patch level of that both system and apply it.
reward points if it is usefull ...
Girish

How I can get rid of "Processing File" problem in downloading my apps?

hi, I have problems updating and sometimes downloading the apps in iTunse. when I want to update an app in iTunes( using windows 8) the app stuck says "processing file" and remain for hours and never finish again. what can I do for it. now that I live in Iran. and sometimes I have to use a vpn for downloading the files and when it downloaded a bit I disconnect the vpn and resume the download. please help me how to get rid of this annoying problem. I am using the latest iTunes. in fact in every iTunes update I was looking forward to seeing that this problem is solved but it wasn't. thanks in avanced and bye.

See Here for assistance...
iTunes Customer Service Contact
http://www.apple.com/support/itunes/contact.html

PO Output Type / Processing Routine Problem

Hello everyone,
I cannot seem to find any reference to the problem described below.
I have encountered a problem by migrating from SAPFM06P to SAPLMEDRUCK during an ECC 5.0 upgrade, at a client where I am under contract as an ABAP Developer.
Here is some background to the situation. The client is currently migrating from version 4.6C to 5.0 and thought it was a good idea to upgrade their purchase order messaging programs from the outdated SAPFM06P, which was utilized in version 3.x, to the newer program SAPLMEDRUCK implemented for use in version 4.6.
Specifically, Message Output (ME9F) controls the output of purchase order messages in foreground, when the purchase order message is saved and the "further Data option" of the PO message contains "requested processing" equal to the value of "send with application own transaction". This way, the actual messaging can be controlled in foreground and "breakpoints" can be set to display tables and fields. Behind the scenes, the message status program RSNAST00 is executed by ME9F program RM06ENDR_ALV. During this execution, it locates the message (NAST) record from the purchase order and the (TNAPR) configuration, which links the output type to the ABAP print program and SAPscript layout set. The specific problem is: in RSNAST00, the external call perform "PERFORM (TNAPR-RONAM) in PROGRAM (TNAPR-PGNAM) USING RETURNCODE US_SCREEN IF FOUND" does not pass NAST information to the called program (TNAPR-PGNAM). I know no NAST table information is passed because I set a break-point on the perform and single step to the print program. Therefore, the purchase order is unknown by the print program (TNAPR-PGNAM) and results in an error and no purchase order print is provided. Needless to say, this was tested with a new "Z" version of SAPLMEDRUCK. So, I changed the program name (output type processing routine) in configuration to SAPLMEDRUCK, but there again the NAST information is not passed to the print program from RSNAST00. Ironically, I reverted back to the older "z" version of SAPFM06P and NAST and TNAPR information is passed to the print program thru the external call perform quoted above. I prefer to not modify the SAP original code for RSNAST00, which is used in many other applications.
One other note, I had previously performed this maneuver on one different occasion with very successful results.
Has anyone ever encountered this problem in a 5.0 environment (running Windows NT and MSSQL and SAP BASIS 6.4).
I know this is long winded, but I wanted to explain the background of the entire situation.
Any and all help would be appreciated. Thanks in advance,

Dave,
Your entry points (like form ENTRY_NEU) should remain in your current version of SAPFM06P. Change that form to reflect the function calls in the new SAPLMEDRUCK form (ENTRY_NEU) (calls to ME_READ_PO_FOR_PRINTING and ME_PO_PRINT.
Look at the example below:
Here is the form in your old (Z) version of SAPFM06P:
FORM ENTRY_NEU USING ENT_RETCO ENT_SCREEN.
XSCREEN = ENT_SCREEN.
IF NAST-AENDE EQ SPACE.
   XDRUVO = '1'.
ELSE.
   XDRUVO = '2'.
ENDIF.
CLEAR: XFZ, XOFFEN, XLMAHN, XLPET.
*- Anstoß Verarbeitung -
CLEAR ENT_RETCO.
PERFORM LESEN USING NAST.
MOVE RETCO TO ENT_RETCO.
ENDFORM.
Here is form entry_neu in your new (Z) version of SAPFM06P:
INCLUDE FM06PE02                                                   *
form entry_neu using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
        l_nast like nast,
        l_from_memory,
        l_doc   type meein_purchase_doc_print.
clear ent_retco.
if nast-aende eq space.
    l_druvo = '1'.
else.
    l_druvo = '2'.
endif.
call function 'ME_READ_PO_FOR_PRINTING'
       exporting
            ix_nast        = nast
            ix_screen      = ent_screen
       importing
            ex_retco       = ent_retco
            ex_nast        = l_nast
            doc            = l_doc
       changing
            cx_druvo       = l_druvo
            cx_from_memory = l_from_memory.
check ent_retco eq 0.
call function 'ME_PRINT_PO'
       exporting
            ix_nast        = l_nast
            ix_druvo       = l_druvo
            doc            = l_doc
            ix_screen      = ent_screen
            ix_from_memory = l_from_memory
            ix_toa_dara    = toa_dara
            ix_arc_params = arc_params
            ix_fonam       = tnapr-fonam          "HW 214570
       importing
            ex_retco       = ent_retco.
endform.
Remember, the form should be in the Z version of SAPFM06P - not the Z version of SAPLMEDRUCK. Make sure the configuration (TNAPR) has the SAPFM06P program name and entry point.
It should work. Let me know how it goes.
Rick

MTO Process MRP Problem

Similar Messages

Maybe you are looking for