MTO requirement class

Hi Expert,
I want to confirm with expert, the standard SAP MTO requirement class is KE? Or other requirement type?
By the way, I hit an error message in GL account where I am doing a MTO order with internal order. My error message is GL account is not a cost element.
As far as I researched from the forum, for cost based object, it should post to GBB VAY account and not GBB VAX account, however my MTO with internal order is hit to GBB VAX which is not correct. Any expert know what setting I need to set for my requirement class or other setting in the system that I can do?
What should I check in the system?
Thanks.

Hi,
Try out in configuration for:-
SPRO>MATERIALS MANAGEMENT>VALUATION&ACCOUNT ASSIGNMENT>ACCOUNT DETERMINATION>ACCOUNT DETERMINATION WITHOUT WIZARD>DEFINE ACCOUNT GROUPING FOR MOVEMENT TYPES.
check out for you movement type.
As stsated earlier take help of your FI consultant.
Regards
Aadesh Kamat
Edited by: aadesh123 on Jun 10, 2011 1:56 PM

Similar Messages

Requirement types & requirement class for trading goods.

Dear all,
I am working on a project in which there are only trading goods. Majority of the items are make to order & few are make to stock.
For the make to order scenario, what will be the requirements type & requirements class to be used for the trading goods. Which item category is to be used......will it be TAN or different......
For the make to stock scenario, what will be the requirements type & requirements class to be used for the trading goods. Which item category is to be used......TAN cannot be used here as it will be used in the MTO scenario so diffferent controls.
What control parameters should I take care of while defining the requirements class & requirement type.
With best regards,
Niyaz Sayyed.

Hi,
    As my understanding, You should copy a new requirement class and make the following parameters and its values.
   For Requirements,
      req.transfer is X
      Allocation ind. is 1
      Prod.allocation is X
     No MRP is blank
For assembly
                assembly type is 2,
                 order costing is X,
                 Special stock is E,
                 order type is ZXXX
You can refer to the sap standard MTO strategy 20 to complete your project. This is the most important parts defining the requirements for sales and distribution module.
george.shi

Requirement class through the Controlling

Hi experts,
Can anyone let me know about the requirement class through the controlling area. Our client process is MTO 3rd party. I am looking for the following path...
spro>controlling>prod.cost controlling>cost obj.control>prod cost by sales order>control of sales order>check req.class.
under Account Assignment tab there is a acc.assign.cat., valuation, settlement profile, results analysis key fields, . What inputs should i give in these fields and pl tell me what it's control?
Once sales order gets settled how it will reflect in the settlement profile? can you tell me brief about settlement profile.
Looking forward your valuable inputs
best reg
anif

My guess is that you're have an old class file of FramePrinciple that the compiler is finding.
Try deleting your class files and recompiling.

Requirement Class Selection

Hi
We have a two company code say 1000 / 2000. in 1000 co code we produce FG by strategy 10(MTS) where as in co code 2000 we produce material FG by strategy 45 (MTO). now my qestn is :
when i create Sales order for material which is in co code 1000 system takes defualt cutomer requirement KEV for stock material but it should not to be take.
Please sugest earliest.

Dear Vishal
You have not specified whether sales area, sale document type and plant are different for each company code.
- Assuming that your sales area and sale document type are also different, please check in OVAZ whether you have maintained the correct sales area to the sale order type.
- Ensure that in OX18, correct plant is maintained for the company code
- In material master, correct sales area is maintained which you can check in MM02 by selecting only the sales area
- In MRP3 view of material master, check what strategy group you have maintained bcoz, the requirement class depends on this.
thanks
G. Lakshmipathi

Re: Question in Requirement Class?

Hi experts,
I have a question here reg. automate cost calculation.
For this, I have created Req. Class, Req. Type, assigned req type to req. class, assign item cat. to req type and costing has assigned to req class.
Here the question is.........
- In req. class(TC:OVZG) under Assembly tab there is a assembly type, order type... what is the useful of these fields and what's control? In req class, client wants to fill in assembly type as "2" or "0"
- In req. class under Account Assignment tab there is a settlement profile....what is the useful of this filed and what's control? In req class, client wants to fill in order type as "PPC1".
Is there any link with these fileds to automate cost calculation.
Looking forward your valuable thoughts/ideas....
adv thanks
vk

We are not using any assembly type or order type in MTO scenario for our requirements class (transaction OVZG).
Settlement profile is required to settle the order. After the production process is completed the order needs to be settled so that costs are settled and for this reason a settlement profile is required. Costing variant PPC4 should be used in make to order scenario.
Regards,
GSL.

Availability check box at schedule line level and requirement class level

Hi All
What is the significance of availability check field at schedule line level and requirement type level.
If I remove the check box at schedule line level, then there won't be any availability check carried out in the sales order, even though in requirement class it is checked. Is it for doing availability once the requirement is passed to MRP...
In make to stock scenario, no availability check is active at schedule line level.
scenario 1. stock is 0 in plant, when i place an order for 10 quantity, does system give any confirmed quantity on so and so date...or the confirmed quantity will be zero or as there is no availability check carried out, it confirms 10 quantity on customer requested delivery date and the time of creation of delivery, it gives an error message stating zero quantity is available. which one is correct in all the above.
In make to order scenario, no availability check is active at schedule line level.
order was created for 10 qty, as there is no availability check active, does the system give some date based on the lead times maintained in the material master or not?
Regards
Sree

Hi sreekar
The significance of availability check at schedule line level is to determine weather availability check and TOR should be carried out for sales orders or not.
If you remove check box at schedule line level , availability check and TOR wont be carried out at sales order level.
Coming to the scenario you said , make to stock , i think the availability check you are using is 01 make it 02. which is planned requirements. and stratergy group as 10. in MRP3 view in MMR. .
as the availability check u have put 01 & stratergy group as 10 availability check doesnt carry
coming to the scenario 2 , if the stock is 0 in plant and if you create a sales order, then the confirmed quantity should be 0 and that particular order will go to backorder processing.
sometimes it confirms the ordered quantity as the confirmed qunatity, and it gives a confiremed delivery date on which the stock is confirmed , but that date is a tentative date.
all these unconfirmed orders will go to backorders. once the qunatity is confirmed automatically , delivery date also will be done
Coming to scenario 3 , when you create MTO order there will be availability check checked at the schedule line level. can you tell wat is the schedule line you are getting is it CP or ND?
for schedule lines , ND - no availability check will be there , PD - availability check will be there
Note: plz check 1st the availability check you have entered in MMR , if it is 01 make it as 02. and then run these cycles.
Reward points if useful and if Any queries let me know
Regards
Srinath
Edited by: sri nath on Mar 21, 2008 7:53 PM

Purpose of Requirement Class

What is the purpose of requirement class?

The requirements class contains all control features for planning such as relevance for
planning, requirements planning strategy and requirements consumption strategy. In
addition, it is specified at a global level whether an availability check is to take place for
the material in the sales and distribution documents on the basis of the ATP quantity
(ATP = available to promise) and whether requirements are to be passed on. A finer
degree of control can be obtained for sales documents using the schedule line category.
Replenishment lead time is only included in the check performed on the basis of the
ATP quantity.
Also please check this link: http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=29323
Regards
Sai

Error in requirement class while assigning service order type.

Hello All,
I am getting below error message whenever I am trying to assign a service order type to requirement class.
This the error meassage:
Maintenance order type ZSC3 is either not flagged as a service order type or revenue posting is allowed for this order type.
System Response
The system does not allow any further processing.
Procedure
Enter a service order type that does not allow revenue postings.
Please help urgently.
Best regards,
Partha Das

Ya do same thing but I dont think using this FM will solve the problem...
You get the Update Terminated message when the normal course of the program has been halted by user intervention.
Now could u please check that are u calling any FM in your program.
If yes just list out all of them.
Thanks.

Requirement class MRP control ?

Hi Gurus,
i have created a material with strategy 40. first i created sales orders without changing any option in Requirement class. then i run MRP. planned orders are created for sales order.
after that i changed the requirement class as No MRP and creatred new sales orders when i run MRP The sales orders which i created after changing the Requirement class is getting added to the planned order.
as the second sales orders should not consider in MRP Why they are gettind added to the planned order.is there any other control that controls the sales order MRP consideration.
Thanks&Regards,
Venkat.

Hi Venkat
Check the requirement type on the sales order and make sure that your requirement type assigned to the requirement class was selected.
Also take a look on point 5 of the following document:
http://scn.sap.com/docs/DOC-50641
BR
Caetano

[svn:fx-trunk] 16929: Add a [Mixin] class that will register the required class aliases in the event the mxml compiler generation   [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework .

Revision: 16929
Revision: 16929
Author:   [email protected]
Date:     2010-07-15 07:38:44 -0700 (Thu, 15 Jul 2010)
Log Message:
Add a class that will register the required class aliases in the event the mxml compiler generation [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework.
Add a reference to this class in the RPCClasses file so it always gets loaded.
QE notes: Need a remoting and messaging regression test that doesn't use Flex UI.
Bugs: Watson bug 2638788
Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/RPCClasses.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/utils/RpcClassAliasInitializer.as

Great exercise to document the problem like this. It got me thinking about how an app with modules would be different from an app that does not use modules. Solution: I moved the dummy reference of PersonPhotoView out to the main application file (as opposed to being inside the module) and it worked. I've probably been lucky not to have experienced this problem earlier, because for most other entities I have an instance attached to my model which is linked / compiled with the main application.

Special stock-E in Requirements class 011-Delivery requirement

Dear expert,
i want to change the value in filed: special stock from E to other value via OVZG, can i do it and how?
please do me a favor,great thanks!
David

Dear David
To the best of my knowledge, in OVZG, for Requirement Class, the field will be blank for "Special Stock".
However, if you want to add, just copy the requirement class and assign the value by renaming the requirement class.
Thanks
G. Lakshmipathi

Requirements class is not defined

Hi,
if I try to add a new item to a contract, I receive the message "Requirements class y1 is not defined".
I double checked the whole requirement customizing and y1 is there and also assigned to the item category determined.
Does anyone know what's the problem?
Best Regards,
Florian

Well, mysterious but I deleted and recreated the whole requirement class and it works.

Cannot load required classes for service SLD Data supplier

Hello Experts,
I am trying to use the SLD Data supplier service from visual administartor for registering my DEV EP 7.0 engine in central SLD.When am trying to access that particular service from visual admin,it is throwing an error saying that:"Cannot load required classes for SLD Data Supplier service and please refer the not for resolution Note No:1017526.
My NW EP 7.0 is at SP17 level and as per the above note all settings are fine and the relevant application is also started well.
Please suggest us for any possible solution.
Thanks&Regards,
Apparao S.

> You can also try the following: Move sldserv.jar from
> /usr/sap/<SID>/<InstID>/j2ee/cluster/server0/bin/services/sld/
> to
> /usr/sap/<SID>/<InstID>/j2ee/admin/lib/
Hi Desiree,
Thanks, worked for me too.
Only in my case, when I moved the file, the sld data provider service did not start at all after reboot of the instance.
Also, the sap.com/tcsldwd~main application refused to start.
I then copied the file back, this time maintaining an entry in both locations and reboot the instance. Everything started working after I reboot the instance. The error also disappeared and I was able to change the SLDuser password.
Thanks
Prasad

Costing Sheet in requirement class for Sales Order costing

Hi Experts,
Could you please explain me the necessity of costing sheet in requirement class configuration.
There is a field for costing variant in requirement class. I hope costing sheet can be taken from that costing variant.
So what is the purpose of costing sheet in requirement class and could someone explain me the use of that field in requirement class.
What happens if the costing sheet in requirement class and costing sheet in costing variant mentioned in requirement class does not match.
Thanks.
Edited by: DSK on Dec 18, 2011 3:21 PM

Costing Variant is assigned to Requirement class
Requirement class is assigned to Requirement type
Requirement type is assigned to Planning Strategy
Planning strategy is assigned to strategy groups
Strategy group is assigned to MRP3 tab in Material Master
System picks the costing sheet in requirement class
In this way product will be costed for Make to Order sale order costing.
Srinivas

Special stock indicator in requirement class

Hi
While trying to create a new requirement class or while changing an existing requirement class, the special stock indicator is always greyed out. Can anyone suggest why?
Thanks.

You need to talk to your CO consultant and make sure that the account assingment settings are done for valuation, only after the special stock indicator can be activated

MTO requirement class

Similar Messages

Maybe you are looking for