MTP AV Config Set up - Help

We used MTP AV USB with our old iMac 0S 9 - the iMac crashed. I've moved a newer iMac running OS 10.4.11 over to our music station. I went to MOTU and downloaded the driver. We plugged in the MTP AV via USB, started up Soundtrack Pro and voila - it recognized there was MTP AV. But I can't configure the devices, such as DX7, Proteus etc. I have clicked on the button to add a new devices, I've dubl-clicked on that new device and can add a name, but under the mfg the only choice is Mark of the Unicorn, not any of the mfg's that would automatically appear in FreeMidi. When I dubl-click on the icon for MTP it brings up Clockworks. That doesn't seem to be what I should be using to configure the devices.
There is a small icon in the upper right hand corner of the picture of the MTP and when I click on it, it shows lots of text, but then crashes out the app (AMS) before I can read anything.
Should I be using something other than Audio Midi Setup?
I deleted an emagic driver from Library/Audio/MidiDrivers - that at least made the DX7 create a noise when I used the Test button.
I am so thankful that it appeared when I launched Soundtrack Pro, but am stymied as to what I need to do to make the instruments play.
Thanks for any help.

I can't speak to exactly how the Xserve RAID comes from refurb but in general there are two steps to using the RAID.
1) Create the RAIDs on the machines. (This takes some 30+ hours.)
2) Format the new volumes. (This takes 2 minutes.)
Assuming the RAID came configured RAID 5 on each side and *you didn't shuffle the drive order* then they should still be configured and available that way. Apple doesn't assume that you are going to use the Xserve RAID with HFS+ formatting - they don't even assume you're going to use it with a Mac so I think the volumes are probably unformatted. My guess is that you are between steps 1 and 2 and you will need to choose the volumes in Disk Utility and format them to HFS+ (but probably not journalled if you are doing video work) and partition them.
You can get and set the actual RAID information using the Java tool RAID Admin.
You can (and should) connect to one of the ethernet ports on RAID unit, but the computer you connect will need to be in the same IP range (probably 169.254..) to get to the first time and run RAID Admin. This is how you can set-up, tweak and check the status of your RAID through software. This is also where you can set the IP of the RAID to be more in-line with your computers local network if you're using something different.
HTH,
=Tod

Similar Messages

  • What instance number and config set number am I supposed to use for ODISRV?

    I'm trying to get one way sync working from ADS to OID using the OID that comes with Collaboration Suite 10.1.2 on Windows. The sync works fine if I run it manually (I forget the command I used for that). I can see user accounts show up in the DIT. The problem is that the sync never happens on a scheduled basis and it looks like it is due to ODISRV not running even after I did what the docs said and attempted to start it. It started with no errors but I guess the log file contained all the actual errors.
    The docs say to specify an instance number > 0 and a config set. Well, it's clear as mud as to which number to actually use. I assmed the configset value happened to match the nubmer in the Directory Manager GUI under the Integration Server entry (which was configset1 for me). I've tried to specify 1 2 and 3 for the instance numbers and I don't know what I'm supposed to use (and some of them are already being used so the command fails). How many instances are there running by default for ODISRV and how many for OID itself? What number should I be using based on that?
    Here are some entries in my logs:
    oidldap01s1304.log- OpName=search, duplicate while inserting in Hash Table.
    My comment on that snippet is a duplicate what? and what the hell hash table is it trying to use? The info isn't helpful at all.
    odisrv02.log- port 389/profile grp 999: registration failure, config set 1 already being executed by instance 0
    odisrv01.log- port 636/profile default: config set 0 already being executed by instance 2.
    oidmon.log - retry counts exceeded are listed for both odisrv01 and 02
    In all those logs the those errors keep repeating. I don't need OID on port 636 so is there a way I can stop/delete that while I'm fixing the sync issue? I saw nothing in the OEM website that allowed me to remove the SSL configuration.
    If I try stopping either instance 0 or 1 and try to restart I can't because the instance number is already used. What the hell am I supposed to do then? That means I can stop everything and not be able to start anything back up, does it not?
    any ideas how to make sense of this mess oracle developed?

    There are two configsets by default. Configset 1 is
    for synchronization and Configset 0 is used by
    provisioning (again, these are default settings).
    You cannot have two odisrv (Provisioning and Synch)
    with the same instance #.
    So, instance 1 could be Provisioning and instance 2
    could be Synch.
    Have you setup your synchronization mapping files?
    I would suggest you use the DIPTester utility to
    setup the synch. It might also be helpful to post the
    commands and the odisrv* logs (not the full dump, but
    the last snippet).Well I was trying to use ConfigSet 1 for synchronization but it either wouldn't let me because of how it is designed or I had screwed it up at that point since I didn't know what numbers to use for anything and it prevented me from using Set1 because of that. In the end I created a ConfigSet 2 and was able to get another instance of ODISRV running with that. That finally got the sync working on a scheduled basis. I'm now trying to get SSO working between OID and ADS and it seems that OID is too stupid to know that a user exists. I log onto the Windows PC into the domain and attempt to go to http://ssoServer.com:7778/pls/portal and login and I get an authorization denied message.
    I have debugging turned on as much as I can and the defaultIsland log file (forget the full filename but its an OC4J file in $ORACLE_HOME\opmn\logs directory). It says that I was denied access because the user could not be found and yet I see the user in the directory tree and it comes back in a search as well. The krbprinicipalname, uid, and orclcommonprinicipalname (I think that's what it's called) are all the same ([email protected]) and the orclusersearchbase is set to dc=mycompany,dc=com so I don't know why the account can't be found.
    ANy ideas on that issue?

  • My wifi is greyed out my bluetooth n hotspot is not working and its showing problem in resetting all setting plez help.. :(

    my wifi is greyed out ..my bluetooth n hotspot is not working and its showing problem in resetting all setting plez help..

    Hello Prakharfromindia,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/ht1414
    Have a nice day,
    Mario

  • When the about:config setting for swipe are changed to allow changing tabs with swipe it does not repond and performs the default back and forward in browsing history action on the selected window instead of switching tabs. How do I get it to work?

    In about:config, the values I changed to for the preference name browser.gesture.swipe.left was Browser:PrevTab and for browser.gesture.swipe.right was Browser:NextTab.
    I have the latest synaptics touch pad on my laptop and it supports three touch swipe on windows pcs and on firefox. The about:config setting seem to be specific for MACs and so does not responds to windows changes.

    Hi,
    I suggest you try the steps in this thread for test:
    Disable Suggested Sites does not work.
    http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/disable-suggested-sites-does-not-work/4ba064b1-1c6e-43f1-939e-2db1d335b2ef
    Regards,
    Vincent Wang
    TechNet Community Support

  • How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?

    How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?
    CS 5.0 launches the internet browser.  > TO SLOW I DONT WANT THIS.
    CS 3.0 uses the local help files > I WANT THIS FOR 5.0.

    You're not speaking to the right forum for your request. Help is a Suite-wide feature and here is the forum where the Help application is discussed, and where the proper Adobe people hang out:
    Community Help Application

  • How to set F4 help for an inputfiled of BSP page?

    hi friends,
    I have to set F4 help for a Field in my BSP page. for this i am doing like this.
    Oninitialization Event....
    tables : t001p ,pa0001 ,t554t.
    data : begin of it,
            awart like t554t-awart,
            atext like t554t-atext,
           end of it.
    data : it_t554s like it occurs 0 with header line.
    parameter : k_pernr like pa0001-pernr.
    data : werks like pa0001-werks,
           btrtl like pa0001-btrtl,
           abs_grp like t001p-moabw.
    clear it_t554s.
    refresh it_t554s.
    select single werks btrtl into (werks ,btrtl) from pa0001
                        where pernr = K_pernr.
    select single moabw into abs_grp from t001p where
                              werks eq werks and btrtl eq btrtl.
    select awart atext from t554t into corresponding fields of it_t554s
                                   where moabw eq abs_grp..
    append it_t554s.
    endselect.
    now it_t554s contails the values to display F4 help in BSP page inputfield.
    how to assign this as F4 help to inputfield....
    I saw some threads. It's getting me to confuse...
    I am new to this topic...
    plz help me.........
    Regards,
    Shankar.

    solved

  • HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

    HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

    Hi,
    Can you confirm that you have an Officejet 8500a or Officejet 8500? On the 8500a model, you can set the networks proxy address and port setting from the front panel of the printer (setup>Webservices setup>proxy). If you are unsure what your proxy settings are you'll need to contact your network admin. If your network uses a proxy users name and password for all devices, you need to enter this information along with the proxy address and port in the printers embedded web server. Type the products IP address into an internet brownser window (printer must be connected to the same network as PC). Select the network tab, and than look for the proxy settings option. Enter in the information and click apply. Once the networks proxy information has been correctly inputed into the embedded web server, try printing again. If unsuccessfully, you might try reinstalling the printer software after uninstalling it. Hope this helps!
    I was an HP employee
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

  • I updated ipad 4.3 to io7 but now when I go to set up it keeps asking me to restore - I have done this from itunes several times but it still gets stuck at this point in set up - help!

    I updated ipad 4.3 to io7 but now when I go to set up it keeps asking me to restore - I have done this from itunes several times but it still gets stuck at this point in set up - help!

    All media and apps should be in iTunes on the computer.  Simply select the content desired to sync to the device and sync it.
    FYI, backups have never included media or apps.
    Downloading past purchases from iTunes

  • I have a iphone 6 wont take all calls says mail box not setup but is set up help please

    i have a i phone 6 wont take all calls says mail box not setup but is set up help please

    Hello ram tough,
    Thanks for the question. After reviewing your post, it sounds like the iPhone is not receiving some calls. Are you having trouble with visual voicemail? I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    If you can't make or receive calls on your iPhone - Apple Support
    Get help with visual voicemail on your iPhone - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Discounts in config sets

    Is it possible to use a custom Excel template to set discounts in exported config sets?

    Hi,
    Can you please elaborate the issue with an example?

  • Creating a score set - please help- I'm going crazy

    OK- deep breath ...........I'm trying to create a score set for 4 instruments. I read the manual, then tried everything on p 765........... I started first with the tracks in the Arrange area.- with and without rubber bands - and because this didn't work, I scrubbed this and tried to simply set up thew score in the Score Editor.
    It didn't work. I want to be able to see the music for 4 instruments - at one go -in the score editor. Is this possible ?
    Please someone save my sanity and give me an blow- by- blow account how to achieve this. I've been on this for hours and can't see the wood for the trees now so am going out for a breath of fresh air.
    Kay.

    You can look at the bottom of the arrange page.. But for 4 tracks I would open a score editor window by itself.. The score section is complex and not intuitive to say the least..
    In the score editor, click on the 6th from the left box. it looks like a page of text (when you highlite it will turn blue).. That shows you the whole score, in a tradional page format.. If you still see only one track, double click somewhere other than the track, (space in between). Page will toggle between showing one track/ and all tracks..
    To make life easier if you have many tracks to display = create a 'score set'. Label it, (band etc). reduce the size, 50 - 65% whatever. Then go under File in Logic, page set up.. Select the 90 turn, so now the pages longer side to side. You can see more measures at a time..
    You may want to have several score sets, to help with editing. One of everything. another to show just the piano and guitar, etc. This will make it easier to edit, copy paste between staves etc.
    The score editor is very powerful, if you take the time to figure it out, but documentation is vague

  • I have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

    i have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

    What brand/model USB drive? Is it bus or AC powered?
    On Mail...
    First Quit Mail, then I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
    Users/YourUserName/Library/Mail
    Users/YourUserName/Library/Mail Downloads
    (Could be a different folder here if you chose such in Mail Prefs)
    Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
    /Users/YourUserName/Library/Preferences/com.apple.mail.plist

  • I am having trouble printing  and am only getting part of the document which i have no margins set any help??

    i am having trouble printing  and am only getting part of the document  i have no margins set any help??

    What version of Pages?
    What Printer?
    If it is Pages '09, turn Comments off.
    Peter

  • Firefox 24 Android what is the about:config setting to display the full URL address again?

    Firefox 24 Android what is the about:config setting to display the full URL address again?
    Example this:
    http://www.thewindowsclub.com/eulalyzer-review-download
    instead of just this:
    EULAlyzer: Free EULA analyzer software for Windows
    In the address bar?

    hello postewar, set ''browser.chrome.titlebarMode'' to 1.

  • How to set local help as default in ID CS5?

    Just received a replacement laptop w/CS5 installed & cannot figure out how to disable/turn off community help...I want it to default to local help whether connected to the net or not.
    Thanks
    Update Info:
    Or, if setting local help as default is not possible, what about turning off or disabling internet sensing by the program?  This will be used in the field and sometimes slow connections are the only thing available.  Testing it on a dial-up connection, it just set there trying to access community help without allowing access to the local help until the dial-up connection was closed.

    Thanks Peter...I'd already found that, but when I first found it, the last section was not in that screen and in playing around, I found that Air was not installed proprly, uninstalled & re-installed that & that last section with the 2 ticks showed up & selected local help.
    Next, I get a message that there is no PDF reader installed...but a working copy of AR7 is & it works...I'm thinking that CS5 should be uninstalled & re-installed, however, that will have to wait until I can get the laptop back to the company we're working for.
    The community help window indicated the local help file to be 40Meg, but a search found no PDF that large on this machine.
    Is this PDF available for direct download & I'll just access it outside of the help screen if necessary.
    Laptop/program owner is in Canada, I'm visiting in Georgia & have an overseas flight on Wednesday...

Maybe you are looking for