MTP check box when cme integrates with ccm
I am reading a document abour cme and ccm integration.The following step indicates that we need to check MTP.
Step 3 Ensure that the CiscoCallManager network uses a media termination point (MTP). The MTP is required to provide DSP resources for transcoding and for sending and receiving G.729 calls to the Cisco CME 3.1 system. All media streams between Cisco CallManager and Cisco CME 3.1 must pass through the MTP because Cisco CME 3.1 does not support transcoding.
Questions:
1. So it means that if I use g729 on the wan between cme and ccm, I must check this one?
2. If I don't need transcode, i can uncheck this box right?
3. I notice as soon as check the box, call transfer button not work on ccm phone. Is this a bug or supposed to be?
Thanks
Restrictions on CME
* Cisco CallManager must use a media termination point (MTP), intercluster trunk (ICT) mode, and slow start.
* Codecs on all the VoIP dial peers of the H.450 tandem gateway must be the same.
* Only one codec type is supported in the VoIP network at a time, and there are only two codec choices: G.711 (A-law or
mu-law) or G.729.
* Transcoding is not supported.
* Codec renegotiation is not supported. For example, if an H.323 call that uses a G.729 codec is received by a Cisco CME system and is forwarded to a voice-mail system that requires a G.711 codec, the codec cannot be renegotiated from G.729 to G.711.
Similar Messages
-
Have many performance problems with latest versions of Firefox.
I remove fFrefox and reinstall 18.0 and everything is fine until Firefox automatically updates to 28.x.
I remove check in box when asked if want Firefox Maintenance installed, but downloads updates anyway and next time I bring-up then problems are back!!!
I have to start over again and never X Firefox.
I just want the basic Firefox - simple, FAST and WORKS !!!
Never liked IE - but may have to go back to it.
Chrome is also automatic download update.
using XP, but may have to rethink
Thanks for any help.What kind of problems do you have with the Firefox 28 release?
Did you check your security software (firewall, anti-virus) to make sure that the new version in allowed?
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
You can create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
How to disable one check box when another is checked
Hi, I'm a first time user.
i am trying to make text fields appar and dissapaer when check boxes are ticked. but only alow one check box to be active at one time.
I am making a simple form in Acrobat pro 9,
I have two check boxes Checkbox1 & Checkbox2.
I have two text fields Textfield1 & Textfield2
i have added actions to checkbox1 & checkbox2 to 'hide or show' the text fields.
Action --> on focus (checkbox1) show/hide field (textfield1) is hide
Action --> on focus (checkbox1) show/hide field (textfield2) is show
oposite
Action --> on focus (checkbox2) show/hide field (textfield2) is hide
Action --> on focus (checkbox2) show/hide field (textfield1) is show
problem 1 - how to disable checkbox1 when checkbox 2 is ticked.
or disable checkbox2 when checkbox1 is ticked.
my other problem is that this action has the same effect for ticking or unticking the checkbox.
thanks in advance to anyone who can help.
can you please write your answer in simple terms. Basically this is the first time i have used acrobat pro so please dont assume any knowledge at all. thansk very much .First, I would experiment with just check boxes and learn their properties and how they can interact.
Have you tried using the same name for 2 check boxes and assign a different "export value" to each check box.
Have you looked at the values a check box or boxes have when checked or un-checked?
Have you looked at how the various actions for a field work? -
Where is the "Start New Row" check box when adding a div tag?
Ever since I updated Dreamweaver, when i add a div tag i no longer see the "Start A New Row" check box. The only checkbox i see is "Insert as a Fluid Element". Has this option been removed or has it been moved to a new location?
Hi MichaelMuirhead,
We have updated Fluid grid in 12.2 release of DW as well as in CC release.
Unlike before, Now DW smartly recognizes when a Fluid page is open and Converts Structure category to Fluid layout category.
I.e. when any element is inserted from Structure category on to a fluid page it will be inserted with required CSS to make it fluid, Unless user advices otherwise.
The idea is to enhance the support for almost all the structural elements as fluid elements, rather than just supporting Div as a fluid element. Hence, Insert Fluid Grid Layout Div Tag has been removed.
Steps to Insert a fluid element:
Select Insert > Layout.
Select the element that you want to insert. (i.e Div or Header or footer etc) 3. In the dialog that appears, enter a new class name, or enter a value for the ID. The selected element is inserted on the layout.
4) To insert a normal/non fluid element uncheck 'Insert as fluid element' check box in previous dialog.
Now to answer second part of your concern " Regarding missing "Start A New Row" check box"
All the elements inserted on a fluid page, start in a New row by default. If user wants to place the element in previous row then in can be achieved by clicking "Move Up a row" button which comes up on FG element HUD, after inserting that element.
Please refer Screen shot for clearer understanding.
For more details on update navigate to: http://helpx.adobe.com/dreamweaver/using/fluid-grid-layout-dreamweaver .html
Here is the link to new Video on how to design a FG page using new FG in DW 12.2.
http://blogs.adobe.com/dreamweaver/2013/02/updated-fluid-grids-in-dreamweaver.html
Please note that "Layout" Category in 12.2 has been renamed to more appropriate sounding "Structure" Category in DW CC.
Hope it helps.
Kindly revert for any issues or concerns.
Thanks,
Puneet -
Add a new check box when a button is pressed??
I was trying to add a check box dynamically when a button is pressed.
The check box contains title and a textbox for the user to enter data.
For example , when the user hits addnew button , a new check box (title-name)
with a textbox for entering name should appear on the form.
Please help
thanksganeshpuppala wrote:
Hi ,
Thanks for the reply , I want to just do the task in java script.
Can you explain with an example.
thanksSince you are on a Java forum, I can only assume you want to be talked out of using JavaScript. And since you didn't indicate your choice of GUI toolkit, the default assumption is that you want to use Swing. Congratulations! Start here:
[http://java.sun.com/docs/books/tutorial/] -
Add a new check box when a button is clicked?
Hi ,
I was trying to add a check box dynamically when a button is pressed.
The check box contains title and a textbox for the user to enter data.
For example , when the user hits addnew button , a new check box (title-name)
with a textbox for entering name should appear on the form.
Please give me any examples.
Please help
thankshere i m posting a similar code. just have a look at it and try it by yourself.
str1="<select id=select"+ac+" name=select"+ac+">";
for(count1=0;count1<document.form1.select4.length;count1++){
str1 = str1 + "<option value='"+document.form1.select4.options[count1].value+"'>"+ document.form1.select4.options[count1].value + "</option>"
c[3].innerHTML= str1 + "</select>"
innerHTMLis userful for your requirement. and check somemore exaples like adding a row dynamically to a html page.
Diablo -
Uncheck one check box when we select other check boxes
Hi All,
This might be very simple question for experts. I just want to unselect one check box (this check box is to select 'ALL' and this will be selected by default) when we select any other check box (for individual categories) on same region. Can any one please suggest me how to implement this?
Thanks in advance.
Regards,
HariHi Shijesh,
Thanks for you reply.
I'm using two items (check boxs), like P1_ALL and P1_TEST. I want to unselect P1_ALL when we select P1_TEST check box.Both the check boxes contains single value in List of values. For this I wrote script like
<script type="text/javascript">
function uncheckAll(pthis)
elm = document.getElementsByName('P1_ALL');
if(pthis.checked)
elm.checked = false;
</script>
And in HTML form element attribute of P1_TEST, I have 'onclick=uncheckAll(this)'. But for some reason when I select 'P1_TEST', P1_ALL check box not getting un-selected.
I would be grateful if you suggest what needs to correct in this one.
Regards,
Hari -
JTable - Check box in column header with sorting
Hello
I have 3 problems/questions.
1. When adding sorting to a table with
setAutoCreateRowSorter(true);and you click on a column header, normally a sorting arrow will appear, and indicate in what direction its sorting,
but in the column head with the checkbox, even though the sorting works, the arrow will never appear. Is there anyway to fix this?
2. Is there anyway to get the checkboxes in the table cells to be aligned left (I dont mean the columnheader checkbox, but the ones below)?
3. When you click on the columnheader to either sort or check the checkbox, you will have to wait about a second between each click, or else it won't react and won't sort. sometimes you will have to click twice for it to react. If you click a lot of times fast, then it won't react until you stop for a second, and click again, though it will react only on the first click, but not the secont, third, fourh, and so on, until you stop for a second. Is there anyway to fix this, or atleast make it have a better reaction time?
This is the code for creating the table:
public class Example extends JFrame{
private Container container;
private JTable exampleTable;
public Example(){
container = getContentPane();
ExamleTableModel examleTableModel = new ExamleTableModel();
exampleTable = new JTable(examleTableModel);
TableColumn tc = exampleTable.getColumnModel().getColumn(0);
tc.setCellEditor(exampleTable.getDefaultEditor(Boolean.class));
tc.setCellRenderer(exampleTable.getDefaultRenderer(Boolean.class));
tc.setHeaderRenderer(new CheckBoxHeader(new MyItemListener()));
container.add(new JScrollPane(exampleTable), BorderLayout.SOUTH);
exampleTable.setAutoCreateRowSorter(true);
setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
this.pack();
setSize(500,500);
setVisible(true);
}This is the code for the checkboxheader:
class MyItemListener implements ItemListener
public void itemStateChanged(ItemEvent e) {
Object source = e.getSource();
if (source instanceof AbstractButton == false) return;
boolean checked = e.getStateChange() == ItemEvent.SELECTED;
for(int a = 0, b = exampleTable.getRowCount(); a < b; a++) {
for(int c = 0, d = exampleTable.getRowCount(); c < d; c++) {
if(exampleTable.getColumnName(c).equals("")){
exampleTable.setValueAt(new Boolean(checked),a,c);
class CheckBoxHeader extends JCheckBox
implements TableCellRenderer, MouseListener {
protected CheckBoxHeader rendererComponent;
protected int column;
protected boolean mousePressed = false;
public CheckBoxHeader(ItemListener itemListener) {
rendererComponent = this;
this.setHorizontalAlignment(JLabel.LEFT);
rendererComponent.addItemListener(itemListener);
public Component getTableCellRendererComponent(
JTable table, Object value,
boolean isSelected, boolean hasFocus, int row, int column) {
if (table != null) {
JTableHeader header = table.getTableHeader();
if (header != null) {
rendererComponent.setForeground(header.getForeground());
rendererComponent.setBackground(header.getBackground());
rendererComponent.setFont(header.getFont());
header.addMouseListener(rendererComponent);
setColumn(column);
rendererComponent.setText("");
setBorder(UIManager.getBorder("TableHeader.cellBorder"));
return rendererComponent;
protected void setColumn(int column){this.column = column;}
public int getColumn(){return column;}
protected void handleClickEvent(MouseEvent e) {
if (mousePressed) {
mousePressed=false;
JTableHeader header = (JTableHeader)(e.getSource());
JTable tableView = header.getTable();
TableColumnModel columnModel = tableView.getColumnModel();
int viewColumn = columnModel.getColumnIndexAtX(e.getX());
int column = tableView.convertColumnIndexToModel(viewColumn);
if (viewColumn == this.column && e.getClickCount() == 1 && column != -1) {
doClick();
public void mouseClicked(MouseEvent e) {
boolean active=true;
JTableHeader header = (JTableHeader)(e.getSource());
switch (e.getID()) {
case MouseEvent.MOUSE_CLICKED:
case MouseEvent.MOUSE_PRESSED:
case MouseEvent.MOUSE_RELEASED:
JTable tableView = header.getTable();
TableColumnModel columnModel = tableView.getColumnModel();
int viewColumn = columnModel.getColumnIndexAtX(e.getX());
int column = tableView.convertColumnIndexToModel(viewColumn);
Rectangle bounds = tableView.getCellRect(-1, column, false);
if (e.getX() > bounds.x + 16) { // only if one the checkbox
if (e.getID() == MouseEvent.MOUSE_CLICKED) {active = false;}
}else{active=true;}
if(active){
handleClickEvent(e);
((JTableHeader)e.getSource()).repaint();
public void mousePressed(MouseEvent e){mousePressed = true;}
public void mouseReleased(MouseEvent e){}
public void mouseEntered(MouseEvent e){}
public void mouseExited(MouseEvent e){}
}If you want the code for the ExamleTableModel, I will post it if you ask (having trouble with the character limit).What are you supposed to cast it to? I might have tried to cast it to something wrong.
I tried
TableCellRenderer tcr = table.getDefaultRenderer(Boolean.class);
((DefaultTableCellRenderer)tcr).setHorizontalAlignment(SwingConstants.LEFT);and that gave me a ClassCastException. But I might have been trying to cast it to the wrong thing. -
Disable a group of check boxes when we open a page in the display only mode
Hi all,
I need help in making a group of checkboxes display only when i open it in the display mode. I have made the following coding for it,butits not working.Can you help.
MODULE disable_indicator OUTPUT.
IF action_type = display_only.
LOOP AT SCREEN.
IF screen-name = INDICATOR_SET_OVERDUE_ITEM'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF screen-name = 'INDICATOR_SET_OVERDUE_ITEM'.
screen-input = 1.
MODIFY SCREEN.
RETURN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE. "Hi Kushaal Choudri,
Chek out in Debug mode if first IF condition is triggering or not ?? Also assign Screen Group if u want to disable multiple fileds at a time and use it in IF condition...
MODULE DISABLE_INDICATOR OUTPUT.
IF ACTION_TYPE = 'DISPLAY_ONLY'. ==> Put it between Single Quote and check the CASE as it's case sensitive...
LOOP AT SCREEN.
IF SCREEN-NAME = 'INDICATOR_SET_OVERDUE_ITEM'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF SCREEN-NAME = 'INDICATOR_SET_OVERDUE_ITEM'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE. "disable_indicator OUTPUT
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7 -
I was trying to sync my ipod and for whatever reason my iTunes wasn't recognizing my ipod anymore and asked if I wanted to erase it and basically start over. So I said yes, thinking it would then put my music library back on my ipod, but instead now it shows all my music but it won't play or sync. When I try to play any song, it says it can't be located and asks if I would like to locate it, but I still can't find it! I've had to go into the iTunes store and redownload songs and that works. But I would really like to just locate my library wherever it is in my computer. Help!
I'm in the same boat...so far no one has helped here
-
PSTN access code when centralized deployment with CCM
Hi,
I've got a centralized deployment with CCM6 and two sites. I used two H.323 gateways and set the PSTN access code to 9. I defined my route pattern and put my gateways in a route list. My problem is that I've got most of the calls from site B routed the site A gateway. I've thought of two access codes but what if i've got 100 sites to deal with.
Please advice,this is not a Video over IP question, please use the NetPro categories appropriately
already answered your other post, please do not duplicate posts -
Delete multiple record in tabular with check box.
Hello guys,
I need your suggestion..
I have master detail block. (INSTRUCTOR and SECTION)
At detail block, I add check box item (name: RB_SECTION_ID) with Database Item "No", and value when check :SECTION_ID (on the property).
I make a button DELETE. The trigger was DELETE from SECTION where section_id = :SECTION.RB_SECTION_ID and
instructor_id = :INTRUCTOR.INSTRUCTOR_ID;
but It not work.
How we delete multiple record by check multiple check box then click DELETE button..??
Regard.
Nia..You datablock in the form cannot automaticaly refresh the changes you make with the SQL statements.
For that you need to explicity call certain built-ins to refresh the data
execute_query(no_validate) --> fetches the available data for that session. Here you deleted some records, so those records will not be available until you do a rollback in the same session(i.e, you exit the form without saving). But until you save, those deleted records will be avaiable for the users in other sessions)
Also, your code works only because the records you deleted are all already saved ones.
So it will be a good practice to use built-in of form builder rather than DML stmt.s
Here you can do like this
begin
go_block('TRY_TABLE');
first_record;
loop
if :TRY_TABLE.CCKBOX = 'Y' THEN
delete_record;
END IF;
NEXT_RECORD;
EXIT WHEN :SYSTEM.LAST_RECORD = 'TRUE';
END LOOP;
END;
If your code is like above one, you can revert your deletion by simply giving a F7 (enter-query) and F8 (xecute query). -
Saved text fields and check-boxes empty when 3D window activates
I've created Text Fields and Check-boxes in a pdf template, using LiveCycle Designer.
I create the 3D work in Reviewer, and use the pdf template during Export to 3D pdf.
Using 'Extend Features in Adobe Reader' the user can fill in the text fields, and click the check-boxes then save them with the pdf - just using Reader.
So far this is great!
The problem comes when the pdf is opened again and the 3D window (A3DR_3DFrame) activated.
All the completed fields empty!
This is not great at all!
I've did some tests and found that the filelds only clear if I include the Configs selection list box with the special name 'A3DR_Configs' in the template pdf. (A3DR_Configs lists the Configs stored in the 3D Reviewer file and the user can select the config from that list).
This is unfortunate, as the A3DR_Configs window is useful since it indicates to the user which 3D config is currently being viewed (ie the name of the current config stays highlighted).
Is this a bug that can be fixed or is there a workaround?
thanks,
IanWould you mind to post your commenton the the approriated Adobe forum page ?
This one is dedicated to Acrobat 3D
The correct forum page for Designer is:
http://forums.adobe.com/community/livecycle/livecycle_es/livecycle_designer_es
Thanks in advance
William -
When load google maps V3 check box became hiden.
Hi,
Hiere is example where when load google maps V3 check box became hiden
only with Safari browser ( Tested with Safari 5.0 on Windows XP)
url: http://jtrpovski.hostwebs.com/test99.html.
With other browsers (IE8, Opera 10.62, Chrome 6.0, FF 3.6.10) there is
no problem.
jtrpovski.Hi,
With the latest release of Google Maps 3.2 from 11-Nov-2010 the problem is solved.
JTrpovski. -
How do I change the text in a field with radio buttons or check box?
Hi All:
I have a form that has a list of things with check boxes (could be done with radio buttons) at the bottom. The client wants a single field at the top of the form that repeats the text next to the checkboxes. For example if a user checks the box next to the words "You did thing 1 wrong" the client wants "You did thing 1 wrong" to appear in this text box at the top of the form. If the user checks the box next to the words "You did thing 2 wrong" the client wants the words "You did thing 2 wrong" to appear in the magic box at the top of the page. There are 10 different check box options, so the box at the top would need to be able to have 10 different things in it.
Client is not interested in a drop down menu. I asked.
I am in a bit over my head here, so my question is twofold.
1. Can you do this in Acrobat Pro 10 on a Mac?
2. Can you supply me with code?
Thanks in Advance,
Amy W.Create a text field and make this script its custom calculation script :
var a ="";
if (this.getField("Check1").value == "Yes"){
a="You did thing 1 wrong";
event.value = a;
Also, replace "Check1" with the name of your check box or radio button, and give it an export value of "Yes".
Maybe you are looking for
-
HP C4600 printer connectivity suddenly failed; attempted re-connect, message tells me reconnection succeeded, but computer commands to printer - both scan and print - do not function. Any ideas, other than "It's a printer problem"?
-
Links opening in new window instead of new tab
I'm running Safari Windows 4.0.4. I would like to use multiple tabs within one browser window. However, while in one tab, if I click on a link, it opens a new Safari window. I want it to open another tab. I have the "open links from applications" set
-
Add Link to 3D Object in 9 Extended
I have been looking everywhere for info on adding a hyperlink to a 3D object in Acrobat 9 Extended to no avail. Any ideas on how to add a link so that when a user clicks on an object or group of objects it will open a browser to a predefined page? Se
-
Hallo, sinds 3 maanden ontvang ik geen automatische updates van Adobe flash player. Verscheidene keren heb ik het programma verwijdert en weer terug geinstalleerd maar zonder resultaat. Meerdere malen per dag krijg ik een melding van Microsoft dat Ad
-
I'm looking for case studies on historical data models, because I'd like to know how other analysts had overcome this subject. Please, can anyone help me?. Thanks