MTP driver issues with Creative Zen X-Fi. PLEASE HELP ME!

Hi! I bought yesterday Creative Zen X-Fi. When I got home and charged batteries of this player I was willing to put some music in it. First I installed all programs wich I got with the package and after that I turned my brand new mp3 player on, Windows gave me message about new MTP device connected to the computer. Then I just installed device automaticly. Windows gave me an error message "Device might not work right" or something like that. I have windows xp sp3 and I have already installet mediaplayer . Could somebody please give me some advice I would appreciate it very much.

Unfortunately (for your intended usage case) importing the music copies it from the card to the player.

Similar Messages

I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

You can send it in to them: https://expresslane.apple.com/GetproductgroupList.action?PRKEYS=PF3

Serious Issues with Creative Zen Vision M 3

This all started when I was fast forwarding through a track and it freezes. So, I did reset and it's in recovery mode, whereas usually it will just restart again.So I tried turining it on and off and was still stuck in Recovery Mode. Tried plugging it into the computer, the computer doesn't recognize it. I did everything the website told me to, but my computer will not recognize that it is plugged into the usb. When I have it docked it will not let me do anything at all. I tried to clean it up and it stays in "scan disk" for hours,I tried to format it, knowing it would erase everything but hoping it would fix, and when I tried to format it, I got a message saying "harddisk problem", when I rebbot it simply reboots back to Recovery Mode and the other option I have is reload firmware, and it prompts me to start updating firmware, but my computer won't even recognize that it is plugged in , in the first place, so I am at a loss with what to do next. The best help Creative can give me is email support. As most of you probably have found out there is no technical support phone number, only for returns/exchanges. I am using Windows Vista if that makes a difference, which it probably does since nothing seems to work on Winows Vista, and when I look at My computer, it shows that the device is present, but yet I can't access it through any media source or when trying to install this firmware? garbage. Any help would be extremely appreciated. Thank you in advance. Sarah

That is just crazy, I am so sorry....Mine was bought just this past June, my boyfriend bought it for me because ipods seem to have really negati've reviews when it came to needing repairs and so on... It hasn't even been a year!! I pasted the st and second email below. I can't believe how frustrating this must be for you. I am still extremely annoyed though, it seems like the only option I have now is to send it in , and god knows how much it may cost to fix it. They really do have some customer service issues. They even elude that no matter if I am under warranty or not there is a possibility of "fees" ARGHHH!!!! Most recent email: Dear,Thank you for replying Creative Technical Support.From the description you provided, I can see that there is a "hard disk
error" in the screen of the ZEN Vision M and the troubleshooting steps
did not help. I apologize for the inconvenience caused. Please allow me
to help you.Based on the description of the issue that you have provided, it appears
that your product needs to be scheduled for a repair or replacement.
Please note that your product will be tested upon receipt and if no
malfunction is found in the product, it will be returned to you. Please
follow this link to have an RMA issued for your product:http://us.creative.com/onlinermaAll applicable fees will be assessed at the time that your RMA is
processed in an effort to expedite the repair or replacement of your
product.You might want to browse our online store for accessories for the Zen
Vision: M. These accessories will definitely enhance your experience,
and will allow you to get the most of your player. A leather case for
your Vision:M is a great product to protect it from scratches. http://us.creative.com/products/prod...=&product=4486If you still require assistance, please reply to this email with any
previous correspondence to ensure the quickest and most accurate
service. Thank you.Best Regards,<name removed>
Technical Support
Creative Labs Americas Original Message Follows:
------------------------ I have done all of the things you have told me to do and still no
change. I cannot get out of recovery mode....and the computer doesnt
recognize no matter where it is plugged in. It is fully charged, and that
is the one thing it will do, is charge, otherwise, when it is docked it
wont let me scroll or select any options. Thank you in advance for any
help you can give me. Is there a number I can call?
On Jan 2, 2008 2:43 AM, Creative Americas Customer Support wrote: 1st email:
Thank you for contacting us at Creative Technical Support; we appreciate
the opportunity to assist you. I understand you are having issues with your ZEN Vision:M could not be
recognized by your computer and could not get out of the recovery mode.
You had also tried formatting and updating the firmware but failed to doso. I'm sorry for the complications you are having with your player.
Also, I would like to apologize for any inconvenience this issue(s)
is/are causing you. Let me see what I can do to assist you.Prior to sending this email, our website asked you for some simple and
easy troubleshooting ste
ps.
The steps that I'll be suggesting might be
the same as what were asked previously, but these will be essential for
us to resolve your query.With regard to your issue , please try the following troubleshooting
steps which may help resolve the issue.. Check all connections to make sure that your player is securely
connected to the PC. If you have already verified your connections, you
might try using a different USB port preferably one located in the back
or a different USB Port.2. Try to access the Recovery Mode on your player and run a disk clean
up you may also try the format option. For more information on how to
access the recovery mode please visit our Knowledge Base article,Recovery Mode: What to Do and How to Access
http://us.creative.com/support/kb/ar...p?l=3&sid=47943. If you have tried all the steps above and your Zen, is still not
being recognized by the system, please refer to our Knowledge Base
articles:MP3 player not detected
http://us.creative.com/support/kb/ar...p?l=3&sid=4275USB - General Information and Essential Troubleshooting
http://us.creative.com/support/kb/ar...p?l=3&sid=2490If the player is now recognized in the Device Manager but not in the
applications including Windows Media Player, please refer to the
article.MTP players not recognized
http://us.creative.com/support/kb/ar...p?l=3&sid=00534. If you have tried all of the steps above, then you will want to go to
our extensi've Knowledge Base for further troubleshooting ste
ps.
Here is
the link: http://us.creative.com/support/kbIf you are still experiencing the issue, please respond to this thread
on the outcome of each of the troubleshooting steps suggested and on
your information on the following:. Does the player works fine by itself (boots up and plays music
normally)? If no, do you see any error messages on the player's screen?
2. Does the player works on another Windows XP (with at least Service
Pack ) computer?I apologize for the issues you are having on your player. In the
meantime, you may like to take a look at our Zen Aurvana In-Ear
earphones that is acoustically and ergonomically designed for a superiorlistening experienceThe Creative Zen Aurvana In-Ear Earphones are premium earphones that
significantly reduce up to 90% of ambient noise. Ergonomically designed,
the Zen Aurvana In-Ear Earphones completely transforms your listening
experience. Powered by efficient Balanced Armature drivers, the
earphones are acoustically tuned for exceptional audio performance.For more information regarding this great accessory for your player,
kindly check it out on our website at:
http://us.creative.com/products/prod...7&product=4702
I hope I have helped address and resolved your concerns. If in any case,
other complications occur, please do send us a reply with any previous
correspondence so we can look onto other solutions that can help solve
this case. Thank you again for contacting Creative Technical Support.Best Regards,<name removed>
Technical Support
Creative Labs AmericasOriginal Message Follows:
------------------------==================================
Subject: CLI - Technical Support Request - (ZEN Vision:M)
Self Description: Intermediate PC User
Region: Americas
Country: United States of America Support Inquiry: ID(8) My MP3 player is not detected
Product: ZEN Vision:M
CCPP Certificate Number:
Serial Number:
Purchase Date: 20/6/2007 Operating System: Windows Vista 32-bit
Creative Model Number: DVP-HD0003
Computer Brand/Model:
Processor/CPU:
Memory:
BIOS Type/Revision:
System Board/Chipset:
Detailed Problem Description:
My computer isn't recognizing the player. I can't get out of recovery
mode. When I try to format it says there is a hard disk error. When I
try to update the firmware it won't let me because it acn't detect the
product. When it reboots, it reboots to recovery mode. I can't access
the main settings or screen. When it is docked it won't let me do
anything. I tried all the suggestions on the site. The product was 50%
charged when I was doing all this. It won't let me reload firmware
either.
Moderator note: Please remove the name of the advisor before posting up e-mails received from Customer Support.Message Edited by Catherina-CL on 0-22-2008 0:59 PM

FIRMWARE ISSUES WITH CREATIVE ZEN V P

What is going on?!?!!
Just about every other thread i've read on here somebody has my same problem:
) My Zen V Plus was not recognized by my computer and it was always stuck on "rebuilding library" when i turned it on but when it got halfway through, it stopped, and all the music i already had on it was inaccesible.
2) I tried reformating, cleaning up, and, when i tried reloading the firmware,? my player became completely useless!!!!!
Trust me guys, i tried everything else that was suggested on the threads prior to 3/3/08, i even e-mailed someone from CREATIVE,?but when i reloaded?the firmware, it was all over. To top it off, my warranty is no good anymore.
But what surprises me more is the fact that so many have the same problem?and the?guys from CREATIVE still haven't figured out a solution.

YES!!!!!!!!!!!!!!!!!!!! I FIXED IT!!!!!!!!!!!!!!!
I'm not sure how i did it but i will explain as best as i can.
Okay, my problem was that my player was not recognized by my computer when i plugged it in, yet my player was in recovery mode when i plugged it in.
So i went to the RECOVERY TOOL on this website. Like the previous times, it said my player wasn't plugged in. At that moment, i quickly unplugged my player and reformatted it, but while it was formatting itself i plugged it back in, while the RECOVERY TOOL was waiting for my player.
Suddenly my Windows Explorer prompted me to choose if i wanted to sync it with windows media player or to just open the files it contained. I WAS SO SURPRISED! But was even more surprising was that the RECOVERY TOOL finally recognized it and i inmediatley updated my firmware...
So there you have it guys, if you're having trouble like i was, just unplug your player when using the RECOVERY TOOL, start FORMATTING it and while it's formatting, quickly plug it back in.
I hope this helps and thanks? for all of your tips and information.
NOTE: my sync manager still didn't recognize the player but i think it has something to do with software compatability issues with Vista, even though it worked the first time when bought my player. But my Windows Media Player works just fine with it. :smileyvery-happy::smileyvery-happy::smileyvery-happy::smileyvery-happy:

Serious Issues with Creative Zen 32GB

I have been a loyal creative user for at least the past 6 years.
In?July I purchased the Creative Zen 32GB device.
At first it was fine, now it's a total mess.
I looked to try and find information on whether other folks are having the same issues as I am, but I can't seem to find anything.
I have Windows Vista 32bit on my computer. I recently upgraded to firmware .2.03 and that just made things worse.
As soon as I purchased the player I have never had the correct time on the device. I change it constantly and when I turn it back on after a day of not using it, the clock is wrong again.
I use Rhapsody to download music to the device. I originally had no issues, but lately, I can't transfer songs to the device from Rhapsody, playlists are deleting on their own.
After upgrading to the new firmware, for every artist I have that contains THE, for example, The Beatles, The Killers, the songs are listed twice on my player as Beatles, The and The Beatles. When I try to delete the duplicate it takes action as if it is deleting, but when I turn the player back on the duplicates are still there.
If I try to delete a song from the device, it takes action as if it is deleting, but the songs are still there when I turn the player on again.
There are duplicates and I do not know how they got there.
When I plug the device into my computer to transfer files or update songs, it makes my computer lock up.
Anyone have these issues? I have tried to restore, but that does not work. HELP!

I have been a loyal creative user for at least the past 6 years.
In?July I purchased the Creative Zen 32GB device.
At first it was fine, now it's a total mess.
I looked to try and find information on whether other folks are having the same issues as I am, but I can't seem to find anything.
I have Windows Vista 32bit on my computer. I recently upgraded to firmware .2.03 and that just made things worse.
As soon as I purchased the player I have never had the correct time on the device. I change it constantly and when I turn it back on after a day of not using it, the clock is wrong again.
I use Rhapsody to download music to the device. I originally had no issues, but lately, I can't transfer songs to the device from Rhapsody, playlists are deleting on their own.
After upgrading to the new firmware, for every artist I have that contains THE, for example, The Beatles, The Killers, the songs are listed twice on my player as Beatles, The and The Beatles. When I try to delete the duplicate it takes action as if it is deleting, but when I turn the player back on the duplicates are still there.
If I try to delete a song from the device, it takes action as if it is deleting, but the songs are still there when I turn the player on again.
There are duplicates and I do not know how they got there.
When I plug the device into my computer to transfer files or update songs, it makes my computer lock up.
Anyone have these issues? I have tried to restore, but that does not work. HELP!

Firmeware issues with Creative Zen Vision:M

My creative Zen vision m 30g had started playing up, songs were being played super fast, or not being played at all, it would also go to FM radio randomly. The first step I took was to format the player and put my music back on, but the problem persisted. I then decided to do a clean up, but again the problem still persisted. I finally decided to reload the firmware, I first downloaded from the site, but when it had got to the final stages it took me to connect my player, but my player was actually connected!
I then downloaded the Creative MP3 player recovery tool, it detected that I had a creative vision Zen me but it told me in the final stages again that my player wasn't connected. Any help will be greatly appreciated.

Hi Topstarxx,
It would be advisable to get in touch with support so that they can help you with this.
Message Edited by KokChoy-CL on <span class='local-date'> -2-2008<span class='local-time'> 04:45 PM

Buying a creative ZEn Vision M Please help !

Hi there
I am debating on buying a creative zen Vision M after two years of i pod problems. My issue is can u convert the music from the i tunes libary to the player? or will u lose all that music
Thanks

--- If you have purchased the music from the iTunes Music Store, you will not be able to use the music on the player - iTMS music is iPod only.
There is a workaround (but it might not be legal, if you like to stay that way) - burn the music to a CD, then re-rip it in MP3 format using your favourite ripper. (iTunes will rip to MP3 - the option is under the 'Importing' tab on 'Advanced'.)
--- If your music is in AAC format, you can use a converter to change them into MP3. Be advised that this causes a major loss in quality - and if you own the CDs, you'll be better to re-rip them from scratch to ensure that they sound good.
You can do this conversion in iTunes - simply make sure that the format in the Advanced/Importing settings is set to MP3 (92kbps is fine for conversion). You can open the Settings window by clicking 'Preferences' in the Edit menu.
--- If your music is in MP3 format, you don't have to do anything! The ZV:M will play it nati'vely.Message Edited by Lokiz0r on 07--2006 09:8 AM

Having issue with Airport Express and Itunes - Please Help

Ok, I am having a very odd issue with my wireless music network all of a sudden, and it's driving me nuts. I have searched the forum and I don't get the sense that anyone else is having this issue.
My house consists of multiple machines, but I have my music on two computers - my G5 desktop and a Mac Mini. I am in the process of encoding all of my CDs to Apple Lossless for storage on the G5, and access of this library provided to all machines on the network (6 total including the G5).
I have 2 airport express units in the house, each connected to a stereo. I have been using this setup for about a year or so, with no problems.
Suddenly now, when playing music wirelessly, the music (and I know this is going to sound weird) has intermittent popping, will skip alot (like a CD player skips), and seems to almost speed up during the skipping. It is SO weird, and I have no clue how to fix it.
I am mainly confused as to where the issue could be coming from. Is it the airport network? Is something wrong with Itunes? Something wrong with the machines? Interference in the home? B/c I have not had this issue before, I am not sure how to even troubleshoot it. I do know that until about a month ago, I had none of these issues.
Within the last 30 days, the only changes that I made were that 1) I have been encoding files to Apple Lossless (but I had some of these before with no streaming issues), 2) I purchased a Mac Mini (not sure what impact this would have), and I upgraded to the latest Itunes.
Any thoughts you can provide for me are very appreciated. ***** to finally be setting up this music server and now start having wireless music issues. Thank you in advance for your help.
Eric
G5 2.5Ghz Mac OS X (10.4.3)

I'm also suffering from skipping/sped up music, only when streaming certain internet radio stations to my Express (for example, friskyRadio in the electronica section). Mine's setup not to distribute IP addresses, if that's relevant.
Other than installing iTunes version 7 (now at 7.0.1) nothing has changed on my network, or on my computer.

Major issue with restoring to backup. Please help!!

So I pluged my iPhone 4 into my Mac mini just to keep things all synced up. I did things the same way that I have done countless other times. But when I ejected my iPhone I found that the address book was all screwed up. Most of the numbers were gone although maybe 10% remained (and a random 10% too, not the newest or oldest 10%). I toyed around with it and couldn't figure out the issue so I just decided to restore from old backup. But when I clicked this the iPhone sits there for a good 30 min before I get the message:
iTunes could not back up iphone because the backup could not be saved on the computer.
Now I know the recent backup is on there becuase it comes up as an option. And in my recent calls list there are the contact names but those names mostly are not saved under my contacts (wierd!).
I also have selected the option to replace the phone contact list with the address book from my computer (because the computer address book was uneffected), and it doesn't fully sync. I still only have the 10% of the contact list.
Im not happy right now and dont know what to do. PLease help!!!
THANKS!

I have tried that and more weird stuff happened. Calender didnt sync. Notes did. Also only kept that weird 10% of my contacts. Transfered zero pictures over and all my settings were completely reset.
This is making me really not happy

I'm having a weird issue with my 3Gs using WIFI, please help me!

Everything was fine before today, and suddently I can't access internet via WIFI. The weird thing is that when I turn Wi-Fi off and back on, the iPhone can access internet for like 30 secs, and it goes dark again. I have constantly strong WIFI signal and my computer works fine. I've tried to reset my network settings and everything, it just keep happening.
Please HELP!

If no change after resetting network settings on your iPhone and/or after restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup (wi-fi settings are included with your iPhone's backup and if there is a problem with the settings included with your iPhone's backup, restoring from the backup will also restore the problem), more than likely your iPhone has a hardware failure with the wireless card or with something else.

Issue with HDMI adapter of N8 (Please help)

Okay here's the thing.
I just bought a Nokia N8 yesterday and it works great so far but there's only 1 problem.
I tried to connect a standard HDMI cable (the one I got when I bought a Sony TV) to the HDMI adapter provided with the N8. However, the standard HDMI cable just won't fit in to the adapter.
Am I using the wrong HDMI cable? Anyone knows what's the problem? Please help me
THANKS

If you've opened the small HDMI cover on the end of the phone, and the supplied cable fits in the port, then you are using the correct cable, if the cable from your TV will not fit in the Normal sizws female end of the HDMI adaptor, then one of them os faulty or damaged, as a stendard |HDMI cable fits easily enouch into the cable provided in the box by Nokia !
http://www.youtube.com/watch?v=iN6IeiZ2bJ8
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Issue with Proportional Spreading Script. Please help !

Hello,
I have a requirement where I need to write a spreading script for a data form. On this form user will enter data at a parent level and what the script needs to do is spread the parent level input value to the 0 level members proportinally based on the values already existing in the 0 level members.
Say the account member is “X”. All the other members on the data form in the POV/Page/Rows and Columns are 0 level members except for one that is Product which is in the Page
Product
- A
- B
I came up with this basic logic for the proportinal spread. Ofcourse I will need to include some logic with IF statement or something else to check if the cell belongs to product A or product B. For now, assuming the value is being input for A so now we need to spread that value at A to 0 level members proportionally.
“X” = ((“X” -> (@CURRMBR(“Product”)*100)/(Previous Parent Value *100))*”X”->”A”
Example with numbers:
Current member cell value = 100 (0 level member for Product A)
Previous Parent Value = 200 (Value for A)
New Parent Value = 400 (User inputs this new value by overwriting the previous value 200)
So, X = ((100*100)/(200*100))*400 = 200
Now, the logic of the formula makes sense to me and would spread proportionally, but my question is how would we get the “Previous Parent Value to calculate the % as the user will overrite it with a new value = 400 before running the rule. So, we would not have 200 anymore and unless we have it we wont be able to know the % to do a proportional spread.
I apologize if this is confusing, but please help me with your ideas on how can I achieve this proportional spreading script. I would really appreciate your inputs.
Thanks!
~ Adella

Hi,
Have you not asked this earlier?
Business Rule - Allocation Script Logic - Not working ! Please help.
But in hindsight, I think there's a little problem with the script I had posted. This was what I suggested:
SET UPDATECALC ON;
FIX(“AccountMember”,”FY11”,”EntityMember”,”Local”,”Working”,”BU”,@LEVMBRS(“Product A”,0),@LEVMBRS(“Product B”,0),”Current”,@LEVMBRS(“Dept”,0),LEVMBRS(“Customer”,0))
&Currmonth
&Currmonth = @PARENT(Product)*(&Currmonth/@SUMRANGE(&Currmonth,@RELATIVE(@PARENT(@Currmbr(Product)),0)));
ENDFIX;The problem I see here, every time the script calculates a product, the total of the siblings of the product changes and when it calculates the next product, allocation is done based on a different different total. To overcome this, you can try it this way:
SET UPDATECALC ON;
FIX(”FY11”,”EntityMember”,”Local”,”Working”,”BU”,@LEVMBRS(“Product A”,0),@LEVMBRS(“Product B”,0),”Current”,@LEVMBRS(“Dept”,0),LEVMBRS(“Customer”,0))
&currmonth(
@calcmode(bottomup);
/*copy original values to somewhere else to make sure allocation base doesn't change*/
"AccountMemberAllocBase"="AccountMember";
Endfix
FIX("AccountMember",”FY11”,”EntityMember”,”Local”,”Working”,”BU”,@LEVMBRS(“Product A”,0),@LEVMBRS(“Product B”,0),”Current”,@LEVMBRS(“Dept”,0),LEVMBRS(“Customer”,0))
&Currmonth
@calcmode(bottomup);
&Currmonth = @PARENT(Product)*(&Currmonth->"AccountMemberAllocBase"/@SUMRANGE(&Currmonth->"AccountMemberAllocBase",@RELATIVE(@PARENT(@Currmbr(Product)),0)));
ENDFIX;
Cheers,
Alp

Issues with my 1st podcast feed - please help

Hi guys,
I've copied a example feed I found on a podcasting website and changed everything to relate to my information but the Feedvalidtor.com keeps finding "line 19 - column 0: XML parsing error: <unknown>:19:0: not well-formed (invalid token)"
<rss xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" version="2.0">
<channel>
<title>Lossless Music Podcast</title>
<link>*****</link>
<language>en-us</language>
<copyright>℗ & © 2014, Lossless Music</copyright>
<itunes:subtitle>Official Podcast for Soul Intents Lossless Music</itunes:subtitle>
<itunes:author>Lossless Music</itunes:author>
<itunes:summary>Label boss Soul Intent kicks off the first podcast with a upfront selection including a few super fresh tracks from himself. Dont forget if you buy any Lossless releases on vinyl you can claim free digital copies by emailing proof of purchase to ******</itunes:summary>
<description>Label boss Soul Intent kicks off the first podcast</description>
<itunes:owner>
<itunes:name>Lossless Music</itunes:name>
<itunes:email>******</itunes:email>
</itunes:owner>
<itunes:image href="https://s3-eu-west-1.amazonaws.com/podcast01/LosslessLogo-1400x1400.jpg” />
<title>Lossless Music Podcast 01 mixed by Soul Intent</title>
<itunes:author>Lossless Music</itunes:author>
<itunes:subtitle>Mixed by Soul Intent</itunes:subtitle>
<itunes:summary>Label boss Soul Intent kicks off the first podcast with a upfront selection including a few super fresh tracks from himself. Dont forget if you buy any Lossless releases on vinyl you can claim free digital copies by emailing proof of purchase to ******</itunes:summary>
<enclosure url="https://s3-eu-west-1.amazonaws.com/podcast01/Lossless+Music+Podcast+01.mp3" length=“133800” type="audio/mpeg" />
<guid>https://s3-eu-west-1.amazonaws.com/podcast01/Lossless+Music+Podcast+01.mp3</guid>
<pubDate>Fri, 05 Sep 2014 19:00:00 GMT</pubDate>
<itunes:duration>0:58:29</itunes:duration>
<itunes:keywords>soul, intent, lossless, music, calibre, chromatic, fade, nottingham</itunes:keywords>
<itunes:explicit>no</itunes:explicit>
</item>
</channel>
</rss>
My feed can be view here - https://s3-eu-west-1.amazonaws.com/podcast01/LosslessPodcast.xml
It's probably something really obvious but I'm new to this and just can't see what I've missed out or done wrong.
Please help
<Email Edited By Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. No-one is likely to email you (except spammers).
There's no need to post the text of the feed - it's not a lot of help much of the time. The URL of the feed is what's needed to enable detective work.
You have a fatal error in your feed, though it's in line 16 not line 19. Line 16 reads:
<itunes:image href="https://s3-eu-west-1.amazonaws.com/podcast01/LosslessLogo-1400x1400.jpg” />
It's not that easy to see here, but you have 'curly quotes' at the end of the URL. These are not allowed in XML and wreck the feed. Because they aren't recognized as closing quotes it looks as if the next few lines are part of the URL, hence the error showing up as being in line 19.
You need to use the same 'straight' quotes that you have at the beginning of the URL.
You are also likely to run into problems when submitting the feed to the iTunes. Same URLs will work with http at the front rather than https.
Though it may not cause any difficulties, to be strictly correct you should have this line at the beginning of your feed:
<?xml version="1.0" encoding="UTF-8"?>
It must be the very first thing in the feed, with nothing whatever before it. Otherwise the feed seems to be OK.

Syncing Issues with Creative Cloud - No Solution - Please Reply

I have spent over two hours with your live chat team in which they took over my computer, deleted files from the CMD prompt and I am still receiving syncing errors using Creative Cloud.
They had me, delete files, restart my computer, sign-in and out of Creative Cloud, pause syncing, change file directories and nothing work. My issue was then escalated to upper management in which I had to repeat the entire issue.
I was passed around from multiple individuals in live chat and at the end, no solution was found. I have been an Adobe client for over 15 years now and I am not pleased that a resolution still has not been found.
I wasted over 2 hours on live chat and then received an email stating that my case was closed because the support team found a resolution! This was completely untrue.
I am asking someone from Adobe upper management to please contact me directly. I will not spend more time with your live chat team and send more log files that do no good. As a long-time client, please contact me.

It may not be possible to manually update your payment details. Could you please place a new order and get back to us if you have further issues.
Thanks
Bev

PSE 8.0 issue with Mac 10.10.2 - Please help

PSE 8.0 was provided when I purchased a Canon CanoScan9000F. Software was uploaded to mac OS10.6.8 via disc provided. I have now purchased a new mac running OS10.10.2 when I try to openthe software I get error message 150.30. I cannot reinstal via disc as new computer doesn't have a disc-drive. Please help

Did you try to migrate PSE from time machine or another backup?
You can never, never, never copy an installed copy of PSE. It just makes a big ol’ mess and now you will have a lot more work to do to fix things. Even if you didn't copy the actual program but only your documents/settings, you will still have the same problem.
First you must download and run this:
https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Which won’t seem to do anything but is necessary to break the links within the program. Then you must go around and manually remove all the bits you can find, not only from Applications, but also from your username>library>preferences and hard drive>library>application support>adobe. Let me know if you have trouble finding those folders. Spotlight will not help you with this kind of search; it’s programmed to skip these files.
Then you can reinstall from scratch using your original media. Since your new mac doesn't have a disc drive, you will need to find someone who still has one or use your old computer if you still have it to copy the contents of the disc to something like a thumb drive, then copy the files to the new computer to run the installer.

MTP driver issues with Creative Zen X-Fi. PLEASE HELP ME!

Similar Messages

Maybe you are looking for