MTP USB drive Winodws 7 64 bit error

I have recently bought iPad 4. When I connected to my computer through USB running Windows 7 Professional 64 bit i got the following error message
"MTP USB Device failed to install"
Please guide me for a solution.
Thanks

The user "auto-xr" posted one solution that worked for several people that you could try here: https://discussions.apple.com/thread/3153566?start=0&tstart=0.
Edit: just substiture Apple iPad instead of iPhone.

Similar Messages

Curve 9220 BlackBerry App World registration error MTP USB Driver is not installed

Hi,
Recently I have purchased Curve 9220, trying connect to BlackBerry App World setup in the first instance I get
1. Get the BlackBerry App World Browser Plug-in (I get tick mark) then when I get
2. Connect your smartphone I get the drop down of my pin no I select my PIN no here I get a error message (An error has occurred communicating with the BlackBerry App World Web plugin. Please restart your device and try again. If you have content protection enabled on your device, please disable and try again.)
I have tried rebooting my device no of times it does not work.
I have removed all USB driveres thats was there in PC rebooted the system it is still not working.
I have even tried in another PC having win7 it gives error message MTP USB Driver is not installed.
For information Content protection is not eabled the encription is not ON in my hand set
Another problem whenever I connect my deice to USB every time it takes up the driver asks me to reboot the sytem (I have even tried the same 4-5 times) still not wokring.
The hand set is communicating with the BlackBerry desk top software (I have downloaded the latest one and using the same).
I need to install few apps which was there in my earlier BB so please help.
Best regards,
Shaibal Ghosh

Hello shaibalghosh,
Welcome to the Community,
As you having difficulty in connecting to apps. world , On your Homescreen Go to Options > Security > and check
encryption is disable For your device and Media card and also Check Firewall it may prevent connecting Apps
World.
Please have a look at this article of KB Apps world web plug-in error appear when attempting to install applications from a computer
Try installing OTA .
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Apple Mobile Device USB Driver (CODE 52 Error)

I've been trying to sync my ipod touch with my laptop computer. I recently updated my version of iTunes, and now can not get my ipod to sync with my computer. The problem is in the Apple Mobile Device USB Driver. The error I am getting is a Code 52 error which states: "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source." I've tried uninstalling the USB driver along with iTunes and all the related software. I have a windows 7 notebook. Any help resolving this issue would be greatly appreciated.

Hi ADziack24,
Thanks for using the Apple Support Communities. The following resource includes an entire section dedicated to the error you are receiving. The steps may help to resolve your issue:
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
http://support.apple.com/en-us/TS1538#error52
- Matt M.

MTP USB Drive Failed for N97 Mini

Hello.
As titled, my N97 Mini is not connecting to my computer (Windows 7 ultimate 64bit).
Phone Software Version 11.0.104.
Can anyone help? please
i tried taking the memory card out, but realising that there is another mass storage inside the phone.

Solved by repairing installation of Nokia Suite. I'm using version 3.3 of nokia suite on a windows 7 ultimate operating system. Needed this step to update firmware.After many attempts I finally overcame this problem by going to control panel>uninstall a program>scroll to nokia suite>select uninstall/change>dialog asks if you want to repair or uninstall>select repair.
*Please make sure of the fllg:
>phone must be on
>MUST be connected in PC Suite mode - If your phone tries to connect to internet or wlan, keep hitting cancel till it asks you to select (PC Suite) mode.
>Windows may try to install drivers and you'll see MTP usb device installation Failed - ignore for now
>Make sure the internet connection on your PC is active
>NOW do the repair-install as described above
>During repair windows will again install your device drivers, and this time you should be good to go
Hope this helps someone, and saves them the many hours I took to get this right.

Lumia 625 mtp usb driver will not load

After latest firmware update I can not load or reload this driver. Windows 7 PC will not recognise fhe phone. Usb knows it is a 625, but unable to do anything with explorer or the Windows Phone for desktop

fergiefred20, which app do you use? The Nokia Suite does not support Windows Phone.

IPad2 on Windows 7 : MTP USB Device = This device cannot start. (Code 10)

Hi Guys,
I want to access to the Internal Storage of my iPad 2 on Windows 7.
But I have an error with the MTP USB Device => This device cannot start. (Code 10)
So I cannot see my iPad in Windows Explorer.
I tried many actions from Forums :
update the driver to the "Apple Mobile Device USB Driver" located in "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers"
delete the upper and lower filters in REGEDIT : {36FC9E60-C465-11CF-8056-444553540000}.
stop and restart the service "Apple Mobile Device"
But as soon as I connect again the iPad there is the same error message after Installing device driver software => "Device driver software was not successfully installed" : MTP USB Device : Fail
Is there someone who get the solution ?
Thank you for you help
Stephane

I have a similar problem, only mine is Code 31 for the MTP USB Driver. The Apple driver loads fine, and I'm able to sync with iTunes, but I can't connect to the device as a drive and copy the photos off of it.
I've tried nearly everything at this point that has been suggested in other threads, and nothing has seemed to work.

Apple mobile device usb driver not digitally signed

I installed(updated) itunes 12.1.1.4 64-bit on wildows 7. Then, it can not recognize iphones and ipods any more.
I tried every means to fix this, updating windows and itunes, uninstalling and installing, rebooting and restarting.......
Finally, I find that the apple mobile device usb driver is not digitally signed. I found this when I open the computer/manage/device manager/portable device/iphone/update driver. Windows installed mtp usb driver for apple products and indicating the related apple driver software cannot be installed.
what's wrong with this? should I wait until apple solve this problem?

I suggest you try the "for older video cards" version...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Mac Crashed when i plugged in usb drive.

When i plugged in the usb drive, system flashed error message and rebooted. This happen twice, whenever i tried using USB drive.

Hey sandipnirmal,
Maybe the USB HD is corrupt, or at least the partition? I once had a USB HD that I plugged into my laptop and the same thing happened. You might want to see if it will come up on another computer, and if it does, try backing up all of your data, and reformatting the drive, then putting your data back and trying to reconnect to your Mac. I mean it might be last case scenario but it's worth a shot if you have the time.
AvdonR

Ipod apple USB driver

Hi,
just got my new 160gb classic, trying to install it and as soon as my pc recognises it, it says that "Ther was a problem installing the following driver: Apple IPIOD USB driver. An error occured during the installation of the device. The system cannot find the file specified".
Anyone got any ideas on how to solve this problem ?? I have the upto date ITUNES, and i used to have two IPOD minis which work fine ! I also have this problem with one of the new IPOD nanos.
Any help i would appreciate !
Cheers

I'm not sure if this page is exactly what you are after but it might be worth having a look at: iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date

Leopard ejects DVDs Region 0 from USB drive that is region specific

This is against region specification standards. Region 0 is universal region that by spec is supposed to be played in any player in the world.
I think it is a bug because Leopard cannot handle external/USB DVD players properly. The issue is new and Tiger does not have it.
After opening case for another DVD movie related issue I am planning to open now whole bunch of them. The choices by Apple engineers are strange and might not follow paper written standards unfortunatelly.
Sincerely,
Maciej Samsel

I have more precise results of recent tests:
1. USB drive ejects poor (errors by media company producing region 0 DVDs?) region 0 DVD. USB drive is unlocked RPC-2 (still changes of region available). Other DVD region 0 is mounted. It is not systems fault. It is behavior of this particular DVD drive. Same drive tested under Tiger and Leopard.
2. Same movie and/or region 1 and region 2 movie mounts in another USB drive that is region free (RPC-1), but menu icons blink and clock vanishes. Icons are not accessible so when DVD (only DVD, because music CDs or data DVDs/CDs do not cause that) is mounted on your desktop forget ability to disable/enable wireles network, Blootooth, VPN, use spotlight or go to another account.

Ipad4 connection MTP USB device error with Windows 7 64 bit

I have recently bought iPad 4. When I connected to my computer through USB running Windows 7 Professional 64 bit i got the following error message
"MTP USB Device failed to install"
Please guige me

Hello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G

E72 / Win7 64-bit Ovi Suite - MTP USB device drive...

Just installed Ovi Suite (most recent version) on Windows 7 64-bit for my E72.
Windows installs all drivers, however 'MTP USB device ' driver fails to install.
What does this driver do ? And can this be solved ?

I am running OVI 2.2.0.245 on 64 bit W7 and Office 2007 and using a 5800ExpreMusic..
I have experienced all the problems mentioned above. After 2 days of try and error end nearly getting crazy I found a solution at least for my situation. However I can imagine many more people are maybe in the same situation.
At first I had been using the USB ports in front of the machine's cabinet. None of them worked for a longer period than 3 minutes and I always lost the connection to the mapserver. Until I found out that each two ports in front of the cabinet share the capacity of a single USB connection at the back of the system. So I moved the USB from one of the front ports the a back port. Now that the full Capacity of a USB port can be used I no longer suffer any problems with OVI.
It works great.
However it is a shame Nokia users must find out what Nokia could have told its users.

When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows

When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows

Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

MTP USB Device Driver problem

Hi Guys
I currently have an iPhone 5S and I am trying to connect it to my Windows 8.1 Computer so that it appears as Mass Storage, enabling me to back up photos and videos. I noticed int the Device manager that the "MTP USB Device" has an esclamation mark on it and it states that the driver was unable to verify the digital signiture of the device and cannot be used (Code 52)
I have tried various methods to try and resolve this issue but I have had no success.
E.G...
https://discussions.apple.com/thread/3153566?tstart=0
https://discussions.apple.com/message/16322708#16322708
https://discussions.apple.com/message/22972618#22972618
and various other methods.
I Contacted Apple support and Microsoft Support but they were unable to help me. The device was working until a week ago and suddenly stopped showing up as a Mass Storage device. It is visable in iTunes and can be used to USB tether, but not USB Storage because of this MTP USB Device error.
Has anyone got a fix for this that actually works?
Your assistance greatly appreciated.
Chris

Update.
I have found out that the driver file for MTP USB Device is the file winusb.sys.
The problem is that it is not digitally signed and windows 8.1 can not verify it's signiture. This is why there is an esclamation mark on the device in device manager.
I have tried various procedures to fix the problem but none have been successful yet!
If the driver file was digitally signed, the driver would be fine.
The search goes on..

Mtp usb device failed error - iphone 3g - win 7 pro

I have iphone 3g. I use Win 7 pro OS. when i plug in iphone to usb port, i get error message as - device driver failed to install - in detail - mtp usb device failed..
In iTUNES i am able to view the iphone, sync my contacts with MS outlook etc..
kindly help
shansui

What a load of hogwash.
I've just had this error come up - WITH NO CHANGE OTHER THAN UPGRADE OF IPHONE 4 TO IOS 5.1.1.
(running iTunes 10.6.1.7 on 64 Win7)
Powered phone off, and back on again - same error... Haven't had to reinstall windows in a few years - maybe iTunes is now the least stable software in my collection - Might have to try the two (button) salute to Apple...
Error on device "MTP USB Device";
"This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

MTP USB drive Winodws 7 64 bit error

Similar Messages

Maybe you are looking for