Mtrl movement from blocked stock to vendor

my material is lying in bolck stock.
i want to send back that mtrl to vendor.
hw can i?

hi,
return delivery for gr blocked stock is movement type 124.
the table below shows which reversal movement types you can use.
movement type    return delivery          substitute delivery
(GR) 101                 122                              123
GR  103                   124                              125
GR 105                    122                              123
PREREQUISITE :if you want to return delivered goods to vendor for some reason(due to poor quality  or because they are damaged)you can use this function to return goods even if you have posted goods receipt.
when you enter return delivery you should reference the p.o. so the system will suggest:
check return qty does not exceed delivery qty.
Reward points if useful
Regards,
N.Ramesh

Similar Messages

  • Pointers Needed on Movement from Blocked Stock to Unrestricted Stock !

    Hi Gurus,
    I have a scenario wherein I need to take care of "Movement from Blocked Stock to Unrestricted Stock using Movement type 343 and in the next step need to do Material to Material transfer using movement type 309"
    My Query is:
    1. What does it mean when we say Movment from Blocked stock to Unrestricted stock ?
    2. What does it mean when we say Material to Material transfer ?
    Please help me with pointers on finding a BAPI to do the above stock movements or material to material transfer.
    Many Thanks,
    Madan

    Hi,
    Please help me with pointers on the mapping parameters for this BAPI.
    Here are the details which I am using, but gettin error message -
    T ID                   NUM MESSAGE
    E /CWM/MM              001 Transfer the parallel entry quantity/entry unit of measure
    I have filled below fields:
    GOODSMVT_HEADER
           PSTNG_DATE                   11/25/2009
           DOC_DATE                       11/25/2009
           PR_UNAME                        MyName
           HEADER_TXT                    TEST
    GM
    04  (Transfer Posting)
    GOODSMVT_ITEM
               MATERIAL                       100001374
               PLANT                          1AAE
               STGE_LOC                       B100
               BATCH                          0111331309
               MOVE_TYPE                      343
               ENTRY_QNT                                10.000
               ENTRY_UOM                      EA
               ENTRY_UOM_ISO                  EA
               MOVE_MAT                       100001374
               MOVE_PLANT                     1AAE
               MOVE_STLOC                     B100
               MOVE_BATCH                     0111331309
    Need your help to resolve this.
    Many Thanks,
    Madan

  • Unable to create Vendor return delivery from blocked stock

    Hello,
    Would like to know how to enable delivery picking from blocked stock.
    Some back ground : I am using Delivery type RL (Vendor returns). Required config is done in IMG.
    In our process we move defective material to blocked stock. Next create a Return PO to pick material from blocked stock.
    Next use VL10b to create delivery document against this PO.  We are able to create delivery & PGI from blocked stock.
    All above steps are executing seamlessly without any issue In our QA system.
    However in PROduction system delivery document does not find any qty in blocked stock inspite of being in the blocked stock.
    Please let me know where I could find the setting to enable delivery shipping/ PGI from blocked stock.
    Look forward to some good responses.
    Thanks,
    Ram

    Prerequisites
    When you enter a return delivery, you should reference the purchase order or the material document, so that the system can:
    Suggest data to simplify data input (for example, the storage location)
    Check that the returned quantity does not exceed the delivered quantity
    Reduce the quantity delivered to date
    Reverse other updates that occurred (for example, for a goods receipt into consumption) when the goods receipt was entered
    Before you enter a return delivery with reference to a purchase order, you have to determine whether the goods were posted to stock or to consumption, or whether they were posted into goods receipt blocked stock. If you posted the goods to a particular stock type at goods receipt (for example, quality inspection stock), you have to return them from the same stock type.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63351643a211d189410000e829fbbd/frameset.htm

  • Report for material moved from blocked stock to unrestricted stock

    Hi,
    Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
    Regards,
    Pratap

    It would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
    Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria.

  • How to transfer material from blocked stock  to scrap location

    Dear Experts,
        Weu2019ve put some of raw material into blocked stock. Now we want to scrap these materials & for that Iu2019m trying to take it to unrestricted stock from blocked stock by MIGO (transfer posting ,Mvt type=343).
    But during that system shows an error message that u201CBest before/SLED of batch has been exceededu201D
    Due to this Iu2019m not able to scrap the material from blocked stock.
    Pls advise what to do .Is there some other way to do it??
    Thanks in advance

    Hi,
    You can directly scrap it from Blocked stock using movement type 555 . Further from the message it is observed that SLED( Self Life Expiration Date ) check is active for this material in material master . Try to scrap it in 555 mvt .
    Dhruba
    Edited by: Dhruba Charan Behera on May 18, 2011 12:51 PM

  • MM Stock transfer from blocked stock between plants

    Dear friends ,
    Could I transfer material from Blocked stock between plants but in Blocked stock ?
    I not found this movement types in ECC.
    best regards,
    Ale

    It is not possible to move blocked stock between plants.
    You have to transfer the stock into unrestricted- then you can move it to the other plant- then again a transfer posting into blocked stock.

  • Goods Issue against outbound delivery from blocked stock

    Dear All
    I want to do goods issue against outbound delivery created without any reference from blocked stock of my storage location. Is there any way I can achieve this? I know normally SAP allows goods issue from unrestricted stock but my business scenario requires goods issue to be done from blocked stock against outbound delivery.
    Please let me know any solution for this.
    Thanks and Regards
    Satish Kumar

    Hi
    Check this link where similar issue has discussed and its resolved as well. Please try this and update the findings. If possible could you share the background of this strange requirement.
    http://scn.sap.com/thread/1541911
    Thank$

  • Withdrawals from Blocked stock

    Dear All,
    I work with Process Industry , and when I create Rework Process Order i add issued component Manually
    Normally it's Finished Product returned by Customer in to Blocked Stock
    Can i enter storage location and stock type for the component to issue from Blocked stock  ?
    Regards
    Rami

    hi
    Could you Explain what do you mean by ""S" is not a stock type as E fro customer stock, for instance"
    Regards
    Rami

  • Return material to vendor from blocked stock

    Hi!
    I am going to use blocked stock (s) to lock low quality material.
    How could I return it to vendor. Please give me document chain .
    We use WMS and document flow must include outbound delivery.
    Andrey Garsin.

    Hi! Thank you for answer
    Please provide more detals.
    I need to manage two return scenarios:
    1. stock was loaded into SAP system from  old (non sap system). no purchase order in the system.  stock was created with mvtye p 561.   
    2. Stock was recived from vendor using PO + inbound delivery + GR (101) . Now this stock need to be returned to vendor. 
    If you have a time please give me more detailed step (document flow and key steps inside document ) for both cases or link to help. I have found only this description http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm but it is too rough.
    Andrey

  • Movement type for issuing materials from project stock to vendor

    Hello  gurus,
    after making GRN, the stock is updated in Project stock. now from the project stock, i want to issue the materials to vendor. which MvT i have to use and where it displays the Vendor. i need to track the materilas provided to vendor.
    tnx in advance
    Purushotham

    Hi,
    Here you are talking about Subcontracting Scenario.
    If you need to transfere the project stock to vendor, then you will need to do 2 steps:
    1. Transfer the Project stock to own (unrestricted use) stock. (411 Q)
    2. Transfer the Own stock to vendor. (541)
    Regards
    Vishal

  • Insp lot required while transfering qty from blocked stock to unrestricted

    Hi, say when we recieve 10 qty of  goods from vendor, 5 are ok and remaining are not ok, so inspection done and 5 qty putit in blocked stock. now with some minor rework by the vendor (vendor came to our premises and reworked) made it ok, accordingly we need to inspect the reworked parts. pls advise how to map this in sap qm? how insp lot generated, pls explain the process.

    Activate inspection type - "08" in material master.
    Now do MB1B - mov type 349 - Blocked to QI.
    Here system will create insp. lot.
    Do inspection of lot if okay then unrestricted.
    Hope this helps.
    Thanks!!!

  • Withdraw material from blocked stock at subcontractor

    Hi
    We have Third Party Order process where in materials are directly received to subcontracting vendor stock, when Goods receipt is posted in receving plant.
    Due to some error, few stocks have been posted to Blocked stock at Subcontractor.
    We would like to transfer the stock to unrestricted stock / scrap the stock from Subcontractor blocked stock.
    Kindly let me know your opinion to make transfer posting.
    Thanks and Regards
    Rajkumar

    Dear Yadav,
    1.
    Firste you wrote:
    Due to some error, few stocks have been posted to Blocked stock at Subcontractor.
    After that you stated this
    It is about restricted stock at subcontractor.
    2.
    And materials are not subjected to batch management. So we cannot use MSC2N.
    So, your first statement was that the material is in "blocked" stock, after that you stated that it is in restricted-use stock. But you also stated that the material is not batch managed.
    "Restricted-use" is the status of the batch, so your material should be batch managed if its status is restricted-use.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63396b43a211d189410000e829fbbd/frameset.htm
    As I wrote you can use MB1A +553O if your material is in QI stock, if it is in restricted use you can't. If it is in restricted-use, please use MSC2N to change its status to unrestricted and after that comes MB1A + 551O.
    What is the real stock type the stock you are speaking? Who "posted" it to that stock type and how?
    Please give EXACT information.
    Thanks,
    Csaba
    Edited by: Csaba Szommer on Feb 10, 2009 10:50 AM

  • How to move quality blocked stock to unrestricted

    During Quality inspection I have put 2 nos of the items in blocked stock and done no further processing. Do i need to create notification and then transfer the stock to unrestricted.
    Kindly guide with the T-code
    Thanks

    how r u sure that the blocked stock which is showing in mmbe is that stock which u have placed in blocked stock through the inspection lot .
    i had also faced the same error some time back.
    after analysis i found out that the stock which i was thinking was placed to blocked stock thru an inspection lot wasnot the amount showing in mmbe.
    what u can do is proceed all the inspection lot in QM against the material code.
    regards,
    indranil

  • Nullify the stock from Blocked Stock.

    Hi,
    I want to nullify the stock for a materials which is lying in blocked stock. The base unit of measurement for that material lying in blocked stock is 0 Ea but the parallel unit of measurement is 3.16 KG.
    Please guide how to nullify the stock for parallel unit of measurement of the material.

    Hi,
    Please check the below things.
    1. Check the material master whetner a conversion is maintained for EA and KG.
    2. You can try post the MI10 document for the blocked stock in the parallel unit.
    3.Or you can transfer post to the unrestricted and post a MI10 document or a scrap moment.
    4. with all the above trials if you find the error message no stock is available , then we can say that stock inconsistancy is there.
    5.Then check MM03 stock MMBE stock and MC.9 stock , if there is a variation then it is a inconsistancy.
    6.Check MB5b FOR the wrong posting.
    If there is a inconsistancy in the tables stock raise a OSS message or apply a sap note.
    Check for note on the service.sap.com
    Regards,

  • GR-blocked stock VS Blocked stock

    Dear all,
    I still have some confuse with the concept and use of GR-blocked stock and blocked stock.
    As far as I know, GR-blocked stock is usually triggered at the point of goods receipt with ref to PO. If the goods are not satisfy with the requirement, then post the goods to GR-blocked stock via 103.
    However, under what circumstances we need to post the goods to blocked stock?
    Thanks in advance for the guidance.
    Thanks.
    Best Regards,
    Edwin

    Hi,
    Good receipts is done in Unrestricted stock (or) Qualtiy Stock (or) BLOCKED stock
    Movement type - 101 Unrestricted stock (or) Quality Stock
    what circumstances we need to post the goods to blocked stock?
    during inwarding if you found that the lot will having problem where the value is more and qty is more
    you will inward in Blocked stock
    Movement type -- 103 - For blocked stock in this you are moving to block stock if  you see the P.O history of the p.o. there will be qty updation and value updation is not there
    when u move from block stock to unrestricted stock using movement type 105
    stock will be getting updated and valu also
    You have totally confused
    G.Ganesh Kumar

Maybe you are looking for

  • Why do I always get 2x text in lyrics?

    Every time I paste lyrics into my iTunes info window...it copies it twice. It doesn't happen when I drag a text file into the lyrics window. I only get a single copy when I do that. But whenever I use COMMAND-V to paste lyrics I've copied off the int

  • Does XML approach for passing parameters in the query make the query slow?

    Hi, I am using XML approach for passing parameters in a query. This is running very slow but when I pass comma separated values in parameter, it runs very fast. So it concludes that we should not use XML approach for passing parameters. Please confir

  • IMac: Cooling and Harddrive Questions

    I have a 2010 21.5" iMac with a Hitachi drive. I've always had an issue where the fans would, on occasion, ramp up and stay ramped up. The solution for this was always to turn the mac off, and turn it back on. The fans would not, no matter how long t

  • IPhoto no longer recognises iPhone as a device to import photos from

    Hi there, I connect my iPhone 3GS to my iMac but iPhoto '09 no longer picks up the phone and so I cannot import pictures. There is not a problem with the connection as iTunes syncs and up until my husband connected his iPhone to upload his photos it

  • Automating User Creation

    Hi - I've been working on the following script to automate creation of users. I want to run it as a scheduled task so the service desk guys don't have to spend the time. The way it sits currently it will create the user just fine. It fails when tryin