Mts codec missing from Premiere CS4, NOT trial version

I've been all over support trying to get this fixed today, I hope I don't skip a detail. This link is to the answer that seems closest to my issue, maybe
http://forums.adobe.com/message/3114069#3114069
I installed from my DVD's onto a laptop for a quick trip, didn't expect to need to leave it installed was going to use the trial and let it expire, no big deal, right? Discovered that I need to activate to get the MTS codec to use my footage (sony HDR--###), so fine, I deactivated my PC version and activated the laptop. Worked for a few days in the hotel. Now I need to produce, but I hadn't installed Encore. When I finish installing Encore nothing works right, so I deactivate and uninstall the whole suite from the laptop and re-install, get a activation problem (too many computers, worked it out with adobe chat) and once it was activated I didn't have the MTS codecs anymore, and since it's not a trial install, I can't figure out how to force the codec update.
Do I really need to go back again and wipe/reinstall, per the linked suggestion?
-drew

Do I really need to go back again and wipe/reinstall, per the linked suggestion?
Short answer: Yes, otherwise you will not get your mts codec.

Similar Messages

New document about sequence presets and codecs missing from Premiere Pro

If you're having problems with sequence presets and codecs missing from Premiere Pro, see this document for solutions for this activation issue.
This document relates to the following problems:
- missing sequence presets when creating a new sequence
- Encore error: "Encore will not launch in non-royalty bearing mode. The application needs to be serialized with a royalty bearing serial number."
- When opening a project in Premiere Pro: "Error Adobe Premiere Pro: This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
- When importing footage, the footage is missing audio or video.
These failures are all because Premiere Pro and Encore use some codecs that require activation before they can be used. If activation of these codecs has failed, these codecs will not be available to use.

Well done.

Aaf export from premiere could not be opened properbly in protools

aaf export from premiere could not be opened properbly in protools (by reference) is it a bug? I dont want to export all audio and video for a mixing-session. Does anyone have experiences with this problem?

Hi drahtzieher,
You might try what is suggested in the following article. Hope it helps!
http://soundslikejoe.com/omf-aaf-tutorial/
Thanks,
Kevin

Premiere Pro CS5 trial version:

Premiere Pro CS5 trial version - installing third party plug-ins:
Could anybody pleasetell me if the ability to install / use third party transition plug-ins(i.e.: New Blue & Pixelan effects) has been disabled for thetrial Premier Pro CS5, I've tried installing them but have beenunsuccessful in doing so as it would be nice to see how they behavein CS5 before I go ahead and purchase the full version only to find I canno longer use them (I'm currently on CS3).
Many thanks...

I have just heard from the NewBlue customer support team, they write:
"We are working on the update for CS5. We plan to have it ready soon. You are correct that the current version for Premiere is 32-bit but the 64-bit version for CS5 is definitely in the works"

Premiere Elements 10 trial version vs buying Elements 11

Hi!
I downloaded Premiere Elements 10 trial version last week but now 11 is out!
I (unfortunalty for me) didn't realize watermarks would "stay" until I bought full version but I figured I might as well buy the 11 version since it's out. So how can I do this since when I open program it asks me if I want to purchase version 10? and most importantly, will I loose all the work I've done so far???
Thanks!
Vivivd45

You are welcome to uninstall the Premiere Elements 10 trial and install the Premiere Elements 11 trial. You can locate the trial at http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=us.

Some scenes displaced when dyn. linked from Premiere CS4

Hi -
I've encountered an odd problem, and I was windering if anyone else has seen it. My system:
Win 7 64
Prod Premium CS4
When dynamic linking a sequence from Pr to Encore, the rendered sequence has a few seconds where the image is moved about 1/3 of the frame to the right and down. 5a few seconds out of a 60 minute project) I only see it in the Encore monitor window and on a burned DVD. The sequence in Pr looks fine, and it also renders out fine from Premiere. It's only when dynamically linked that this happens.
It has happened on two different projects, each time for about 5 to 10 seconds. The only way to solve the problem was to render out the problem bit from Premiere, then drop the new footage in the same position in the sequence. Encore is clealy not reading something correctly. The problem areas don't correspond to clips in the sequence, though, they go across clips.
What is odd is that one project was Cineform 1920x1080 25p, and the other project was HDV 50i. The Encore project is PAL DVD in both cases.
I have tried to see what the two problem bits did have in common, and it is these things:
They are both nested sequences, nested more than once.
Both had the fast blur effect applied at a transition (but the problem remained when it was deactivated)
Magic Bullet Looks was applied.
Please note that in the projects these same conditions didn't cause any problem at all 99% of the time. Has anybody else seen this before?

By default, the Ram preiew resolution is adaptative and not full quality, as it's just to "preview". You can switch this behavior to full quality, and by default, when you render, it will always be "Full quality" before being compressed by your output module.
You can check the Ram preview doc and the rendering doc from the AE help.
Hope that helps,
Seb

Adobe soundbooth cs4 hangs when called from premiere cs4 in windows 7 64 bit

Whenever I try to edit a soundfile from within premiere cs4 Soundbooth starts and then hangs on my Windows 7 Pro 64-bit machine; works fine in XP pro.

I discovered the problem only occurs once I try to open an mp3 file in Soundbooth CS4 from within Premiere CS4 and Sounddbooth is not already running.
If I open Soundbooth before I try to open an mp3 or any sound file in Soundbooth CS4 from within Premiere CS4 then there are no problems. So the workaround is easy: start Soundbooth before I try to edit soundfiles form within Premiere.
Question: are you using 64 bit Windows 7?

Why no bit-rate control when encoding from Premiere CS4?

Recently upgraded to CS4 from CS3 on my HP-9300 workstation. When encoding for DVD from the Premiere CS4 timeline I've noticed that there are no options for adjusting bit-rate. This functionality was available for the PC on CS3, why is it missing from CS4? Am I doing something wrong?
Thanks.
Spencer

PC.
Win 7.
When you export (File\Export\Multimedia Files) a window appear, and you click on Video (just under your encoding spec.).
A wider window appears and if you scroll down a bit you'll see your bitrate settings, of course you can modify them.
Ciao
Giorgio

4:3 Export Query from Premiere Cs4

Hi there.
Im looking for some advice on best export setting from premiere please.
Basically I am making some visuals for a 12x9 screen and the visuals have to fit exactly onto the screen as there is a certian degree of mapping going on. I am editing using the project settings DV PAL 48khz
I'm wondering is it better to export as
720x576 (D1/DV pal 1.0940)
or
768x576 (square pixels 1.0)
I am a bit confused as to which will fit exactly to a 12x9 screen
I will be playing the visuals Directly from my laptop via Vga cable.
Any advice is welcome thanks!

Sorry I dont understand. Do you mean the resolution of my source media?
It is all of varying sizes and resolutions but I am editing in a 720 x 576 sequence.All of the footage is being scaled up or down (depending on the size) to fit exactly (hopefully) the 12x9 screen
I Have put in a 4:3 guide frame in the preview window to lay clips on. This leaves a small black border at either side as a I am not editing in a 4:3 sequence I suppose.

Premiere cs4 Not Responding after a few mins use

Hello,
I have been using premiere cs4 to make stop motion videos for awhile on this computer and have started having problems with the software.
Everytime I try to use it after a few mins sometimes 5 sometime less it goes white and says not responding resulting in having to close the program. Im starting to get late on deadlines and this is becoming a problem. Ive resorted to doing one step saving then having to close the program and repeat the process.
My system...
i5 750 OCed to 3.5ghz
8gb 1600mhz ram
I know its not the best but untill now its done this work for me fine. I am using stills at a res of 1920x1080 at 150 dpi and there are thousands of stills but again This is a new problem and I have been doing this for awhile with no issues.
Any ideas would be greatly appreciated.

Hello,
Thanks for the quick reply.
I did attempt a small batch sized as you stated but it did not help. It doesnt seem to matter what I'm working on within the program I could have no content and just click different menus and within mins the system will stop responding. That being said the final video must be in 1080p.
Here are the the items requested in the FAQ given.
i5 750 OCed to 3.5ghz also tried stock clock settings.
8gbs 1600mhz ram
2 hhd set up as follows
500gb 7400rpm hdd, program Pagefile, Media cache
1tb 7400rpm hdd, media, project file, previews
4gb virtual page file
win 7 fully updated
premiere pro fully updated
No Audio used
Ive tried various file sizes and settings to match those files all with same result.
As I state above the actual conent size, type and quantity doesnt seem to matter 3-5 mins in and it just stops responding.
Things ive tried so far.
I did extensive mem tests on my ram with no issues
reverted my over clock to stock settings
reinstall the software several times.
Also of note my ram never goes over 50% usage so Im not using all my ram.
I hope this helps i tried to include everything mentioned on the listed FAQ

Dynamic Link from Premiere CS4

When I export Premiere to AE, the composition icon in AE but nothing else.No associated video files, etc. I double-click it or drag it into the timeline area - nothing happens. However, I am able import a Premiere project frm within AE and I can do all those things - but Dynamic Link is not involved. Can I link the two after the fact?

I don't really get what you are saying. For DynamicLink, you do not export anything, you open the saved Premiere Pro project using the DynamicLink option in the import dialog. Upon doing so, you will be prompted with what sequence to use and that's all. If you are referring to creating a AE comp from Premiere using Replace with AE Composition, then that's a different thing. In either case, however, the AE project must be saved in the same location as the Premiere project for things to show up properly.
Mylenium

Effects missing from Premiere CS6 export

Anyone had this issue with Premiere/After Effects CS6 ... Any effects I apply don't export when I export from Premiere. It worked fine on my other PC. Even after effects effects will export from after effects but are ignored when used as an embedded clip in Premiere. This includes third party and premiere effects. Fades and editing work, but not color grading. It shows in the previews and even in the media encoder window, but not in the final FLV or AVI.
No changes to operating system or 64 bit etc. And I'm using an nVidia GeForce 650 GTX card with 4000 MB ram on the card and 32000 MB ram on my motherboard.
GPU rendering isn't on since it's grayed out. Anyone know why, while we are on the topic.

What are you editing, and what are you exporting?
Information FAQ http://forums.adobe.com/message/4200840

Premiere CS4 not capturing but was working fine

Hello folks,
I am using Premiere CS4 and was capturing fine just yesterday, but now it is showing a blank screen in the capture window and after an attempt to record it states that 'no frames were captured'. It is playing just fine on the video camera. I don't believe I'm doing anything differently from yesterday, and I have plenty of hard drive space. Any suggestions?
Thank you in advance,
Joel Miller

Hello folks,
I am using Premiere CS4 and was capturing fine just yesterday, but now it is showing a blank screen in the capture window and after an attempt to record it states that 'no frames were captured'. It is playing just fine on the video camera. I don't believe I'm doing anything differently from yesterday, and I have plenty of hard drive space. Any suggestions?
Thank you in advance,
Joel Miller

Archive folder missing from Mail & search not working

I've been having trouble getting the Archive mailbox to appear in Mail. What's worse, often the search function is broken, and Mail doesn't turn up any search results. I've found some ways to get the Archive folder to reappear, but these only seem to help temporarily. For instance, clicking on the gear at the bottom left and selecting "Get Account Info" then selecting the Archive folder causes it to reappear, but this is only temporary and it disappears after another restart or sometimes after an hour or two. The search not working is the worst, as it sometimes is working and sometimes isn't. I don't have any idea what's causing this, but I am at my wit's end because I NEED Mail to be firing on all cylinders.

Hello, and welcome to the Discussions.
What are your selections in Mail Preferences/Accounts/Advanced for this Gmail account, if using IMAP, regarding keeping message for Offline use? The Mail search can only access the list of messages to search Subject, From, etc, but not the entire message unless copies of all messages are being kept on the computer. This would be true for any IMAP account, btw.
More info, please.
Ernie

Not able to import photos from Iphoto with the trial version of Aperture

I just downloaded the trial version of Aperture 3 and was trying to import my Iphoto library to work with some of the photos in Aperture. When I go to File, Import, Iphoto library, the IPhoto Library is not able to be selected.
I can go into finder and see that I have an Iphoto Library and it opens with no problem, but for some reason I cannot import or open the library in Aperture, which makes me very hesitant to purchase the full version of the product.
Any help is appreciated.

Sounds to me like you are not in the Import dialog box.
What happens if you select File->Import ... ?
If that's not it, show us a screen capture.

Mts codec missing from Premiere CS4, NOT trial version

Similar Messages

Maybe you are looking for