.mts files. Any tips on dealing with them/converting them.

Hi, I have a Canon Vixia HF20 and the file format it exports from the camera is an .mts file format. Importing into the timeline is no problem, but editing isn't so easy in this format, rendering takes over an hour for an hour long clip and outputing to a different format takes just as long. Any other methods I could try without dramatically losing video quality.
-Thanks

This looks as though it may be of help for you: Premiere Elements 7: problems playing mts format video
There are a lot more posts re .mts files.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Similar Messages

Since upgrading to Yosemite on my iMac, My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad... Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..

Since upgrading to Yosemite on my iMac: My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad...
Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..
Thanks

29/11/2014 20:17:01.315 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:17:37.013 com.apple.backupd[616]: Finished scan
29/11/2014 20:17:43.108 com.apple.backupd[616]: Saved event cache at
/Volumes/Time Machine Backups/Backups.backupdb/Geoff Lambrechts’s iMac
(2)/2014-11-29-200648.inProgress/9B453663-603F-40B8-AC21-24F05C724E15/.6162AD34- 38F8-30AB-98E0-4A22FB9D311F.eventdb
29/11/2014 20:17:43.207 com.apple.backupd[616]: Not using file event
preflight for Macintosh HD
29/11/2014 20:18:01.561 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:18:16.288 com.apple.xpc.launchd[1]:
(com.apple.quicklook[715]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.quicklook
29/11/2014 20:18:23.705 com.apple.SecurityServer[56]: Session 100013 created
29/11/2014 20:18:32.046 mdworker[718]: code validation failed in the
process of getting signing information: Error Domain=NSOSStatusErrorDomain
Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
29/11/2014 20:19:01.662 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:19:45.458 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.ipc
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.notification
29/11/2014 20:20:01.138 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:01.484 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:13.430 com.apple.backupd[616]: Found 4529 files (1.1 GB)
needing backup
29/11/2014 20:21:18.786 com.apple.backupd[616]: 2.82 GB required (including
padding), 1.24 TB available
29/11/2014 20:21:31.775 Console[734]: Failed to connect (_consoleX) outlet
from (NSApplication) to (ConsoleX): missing setter or instance variable
29/11/2014 20:21:34.230 WindowServer[162]: disable_update_timeout: UI
updates were forcibly disabled by application "Console" for over 1.00
seconds. Server has re-enabled them.
29/11/2014 20:21:36.898 WindowServer[162]: common_reenable_update: UI
updates were finally reenabled by application "Console" after 3.67 seconds
(server forcibly re-enabled them after 1.00 seconds)
29/11/2014 20:21:36.971 coreservicesd[83]: SFLEntryBase::ListHasChanged
mach_msg returned 10000004d
29/11/2014 20:22:01.817 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:23:02.170 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:24:02.547 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:02.168 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.233 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.236 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.284 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:03.059 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:12.674 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:26:03.464 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:27:03.841 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
On 29 November 2014 at 19:29, Apple Support Communities Updates <

Microsoft !!! please remove stuff which your top specialists are incapable of deploying them so they avoid dealing with them

Microsoft !!! please remove stuff which your top specialists are incapable of deploying them so they avoid dealing with them !!!
have someone deploy SSTP VPN scenario completely ? have you encountered "revocation server offline" annoying error?
have you read microsoft defective chapters which are about PKI & ADCS in MCITP & MCSE books ?
have you read Brian comar books ? have you seen deficiencies in his book ?
we are network trainers. in all killing problem we encounter in PKI scenarios, you don't find any useful thing in MS books. seems they themselves avoid dealing with them because maybe they themselves know thay themselves are unable to deploy what themselves
have been created & delivered.
if you don't believe, begin to deploy the following simple scenario & lok how you will end in the damn error " revocation server offline...."
i have been working on this problem for months but still no result. start deploy it yourself to find what i say.
i have done any suggestion & workaround you may think, so please first deploy it yourself & then if you get result & deployed all steps & it worked, tell me.
before starting any task, first read my previous threat to find out more:
revocation server offline

The way how you ask questions here, how do you expect to get any help here?
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool.
do you have dare to test it ? do you have dare to deploy such simple scenario & you will end up in damn " revocation function offline " message.
don't forget that i need to deploy that without deploying OCSP. i want to deploy that by configuring CDP extension of issued certificates.
i have tested any suggestion you may give me. i have spend months on this. damn with windows operation system , such a pure code !

On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?

On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?

I have find the codec installed on my PC do you see an undesirable one I have highlighted the one that seems strange should I uninstall how can I do this safely
Daniel
Codecs audio
Type
Nom
Format
Binaire
Version
ACM
Codec Microsoft IMA ADPCM
0011
ACM
CODEC A-Law et u-Law Microsoft CCITT G.711
0007
ACM
Codec audio Microsoft GSM 6.10
0031
ACM
Codec Microsoft ADPCM
0002
ACM
Fraunhofer IIS MPEG Layer-3 Codec (decode only)
0055
ACM
Convertisseur PCM Microsoft
0001
DMO
WMAudio Decoder DMO
0160, 0161, 0162, 0163
WMADMOD.DLL
6.1.7601.17514
DMO
WMAPro over S/PDIF DMO
0162
WMADMOD.DLL
6.1.7601.17514
DMO
WMSpeech Decoder DMO
000A, 000B
WMSPDMOD.DLL
6.1.7601.17514
DMO
MP3 Decoder DMO
0055
mp3dmod.dll
6.1.7600.16385
Codecs vidéo
Type
Nom
Format
Binaire
Version
ICM
Microsoft RLE
MRLE
msrle32.dll
6.1.7601.17514
ICM
Microsoft Vidéo 1
MSVC
msvidc32.dll
6.1.7601.17514
ICM
Microsoft YUV
UYVY
msyuv.dll
6.1.7601.17514
ICM
Codec Intel IYUV
IYUV
iyuv_32.dll
6.1.7601.17514
ICM
Toshiba YUV Codec
Y411
tsbyuv.dll
6.1.7601.17514
ICM
Codec Cinepak de Radius
cvid
iccvid.dll
1.10.0.13
DMO
Mpeg4s Decoder DMO
mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
mp4sdecd.dll
6.1.7600.16385
DMO
WMV Screen decoder DMO
MSS1, MSS2
wmvsdecd.dll
6.1.7601.17514
DMO
WMVideo Decoder DMO
WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2
wmvdecod.dll
6.1.7601.18221
DMO
Mpeg43 Decoder DMO
mp43, MP43
mp43decd.dll
6.1.7600.16385
DMO
Mpeg4 Decoder DMO
MPG4, mpg4, mp42, MP42
mpg4decd.dll
6.1.7600.16385
De : sarika02
Envoyé : 17 juin 2014 19:26
À : Daniel Cloutier
Objet : On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
created by sarika02 <https://forums.adobe.com/people/sarika02> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6466796#6466796>

Can you please offer me any incentive to deal with (not responding) any more and stay with Firefox?

Got any incentives to stay with Firefox any longer and deal with (not responding) several times an hour?

You need to give more information on the problem. What were you doing?
Where? Does it happen at the same time? Have you run any mal-ware scans?
 
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
 While you are in safe mode; 
'''''Firefox Options > Advanced > General'''''. 
Look for and turn off '''Use Hardware Acceleration'''

Tips for dealing with large channel count on cRio

Hello, I have a very simple application that takes an analog input using an AI module (9205) from a thermistor and based on the value of the input it sends out a true/false signal using a digital out module (9477). Each cRio chassis will have close to 128 channels, the code being exactly the same for each channel.
I wonder if anyone has any tips for how I can do this so that I don't have to copy and paste each section of code 128 times. Obviously this would be a nightmare if the code ever had to be changed. I'm sure there is a way to make a function or a class but being new to graphical programming I can't think of a good way to do this. I looked for a way to dynamically select a channel but can't seem to find anything, if I could select the channel dynamically I'm guessing I can create a subvi and do it that way. Any tips or help would be greatly appreciated.

There isn't a way to dynamically choose a channel at runtime. In order
for the VI to compile successfully, the compiler must be able to statically
determine which channel is being read or written in the I/O Node at
compile time. However, that doesn't mean you can't write a reusable
subvi. If you right click on the FPGA I/O In terminal of the I/O Node and create a constant or control, you should be able to reuse the same logic for all of your channels. The attached screen shot should illustrate the basics of what this might look like. If you right click the I/O control/constant and select "Configure I/O Type...", you can configure the interface the I/O Item must support in order for it to be selectable from the control. While this helps single source some of the logic, you will still eventually need 128 I/O constants somewhere in your FPGA VI hierarchy.
I should also mention that if each channel being read from the 9205 is contained in a separate subVI or I/O Node, you will also incur some execution time overhead due to the scanning nature of the module. You mentioned you are reading temperature signals so the additional execution time may not be that important to you. If it is, you may want to look at the IO Sample Method. You can find more information and examples on how to use this method in the LV help. Using the IO Sample Method does allow you to dynamically choose a channel at runtime and is generally more efficient for high channel counts. However, it's also a lot more complicated to use than the I/O Node.
You also mentioned concerns about the size of arrays and the performance implications of using a single for loop to iterate across your data set. That's the classic design trade off when dealing with FPGAs. If you want to perform as much in parallel as possible, you'll need to store all 128 data points from the 9205 modules at once, process the data in parallel using 128 instances of the same circuit, and then output a digital value based on the result. If you're using fixed point data types, that's 182 x 26 bits for just the I/O data from the 9205. While this will yield the fastest execution times, the resulting VI may be too large to fit on your target. Conversely, you could use the IO Sample Method to read each channel one at a time, process the data using the same circuit, and then output a digital value. This strategy will use the least amount of logic on the FPGA but will also take the longest to execute. Of course, there are all sorts of options you could create in between these two extremes. Without knowing more about your requirements, it's hard to advise which end of the spectrum you should shoot for. Anyway, hopefully this will give you some ideas on where to get started.
Attachments:
IO Constant.JPG ‏31 KB

Any tips using Muse with Windows XP?

Does anyone have any tips for using Adobe Muse with Windows XP?

Hello,
Adobe Muse is compatible with Windows XP and it should work fine.
http://www.adobe.com/products/muse/tech-specs.html
Are you facing any issues while working on Adobe Muse on your machine?
Regards,
Sachin

I have .MPG and .MTS files on my computer. Can I convert at high quality?

I received .MPG and .MTS files from a friend who shot the video clips on a Sony HDR-CX150, and are now on my computer.
Log and Transfer sadly doesn't work because of the disassembled file structure... Total Bummer.
Will these AVCHD camcorders allow me to throw the footage back on the camera, and THEN perform a log and transfer?
(I don't know if my friend still has the manual)
Side note: I bought Aimersoft Total Video Converter and it seemed to work great, but the quality of the video output is AWFUL. I'm so disappointed.

Try MPEG Streamclip for the MPG files. Lots and Lots of posts explaining its use can be found here on the forum.
Did ClipWrap work on the mts files?
iirc, AVCHD seems to be a one way format. It may be worth reading through the camera manual or going to one a website for the camera to see just to see if going backwards is possible.
Good luck,
x

Tip for dealing with duplicates

Ok we all know it's a big pain in the *** when you get duplicate songs and need to get rid of the duplicates. Especially when you have a LARGE collection like I do.
iTunes clearly has some big shortcoming when detecting and working with duplicates. A lot of the time it'll find stuff that isn't actually a duplicate.
I have some songs that are named the same even though they're not the same song. (Remixes or legitimate duplicates from a "best of..." album or something.)
So I can't just "show duplicates" and delete every other entry indiscriminately. I need a way to go through the list at my leisure (possibly in multiple sittings over several days.) and review all the stuff before I delete it.
Here's a method that makes things easier.
1. Make sure that all your songs have a star rating of at least 1 star. (I default all new songs to my library as 3 stars when importing to itunes and then I raise or lower the stars from my ipod when I listen to them.) If you haven't kept track of your song ratings yet. Give them all a 3 star rating now. The star rating will be used later to select your files to delete.
2. Select your music folder and then select "View/Show Duplicates"
3. From the resulting list, select all songs (Ctrl-A) and then click "File/New Playlist from Selection" Name your new playlist "Suspect dupes" or something
4. Configure your playlist view like this..
* Cover flow on and "View Artwork" on (Selected Item). (You don't want to delete the song with the cover and keep a version with no cover.)
* Make sure you have the following columns visible: Sample rate, Bit rate, Time, Size, Disc #, Track #, Artist, Album, and My Rating. You'll need these to compare the songs.
We now have a playlist which we can refer back to at any time.
Now... If you were to delete files here in this playlist view, all you'd be doing is deleting them from the playlist, and not from your library which is what we want to do.
So...
5. Go back to your library view (Making sure that you've clicked the "Show All" button at the bottom of the window so you're not just seeing the duplicates any more.)
6. Select all the songs in your library (Ctrl-A) and then right mouse button click on the songs and select "Uncheck selection" Which will uncheck every song you have.
7. Go back to your "Suspect dupes" playlist. Everything will be unchecked now. Anything you check while viewing this "Suspect Dupes" playlist will also be checked when you go back to viewing your main library.
8. Here's the tedious part. Go through your "Suspect Dupes" playlist and double click and comparing each potential duplicate. When you find a genuine duplicate that you want to get rid of, Click the box to check the song. Your selections will stay checked even if you close itunes and come back to it another day! (I've been working on my collection for a week now.)
9. When you've finished checking all the ones which are songs you want to get rid of, Go back to the top of the "Suspect Dupes" playlist and scroll through it while Ctrl-Clicking each checked song that's there to highlight the ones you want to get rid of.
10. Once they're all highlighted select "File/New Playlist From Selection" and name the resulting playlist "Delete me" or something. Highlight all the songs in the "Delete me" playlist and then right mouse button click on the songs and select "My Rating/None"
(We do this so that we have a way to recognize these songs when viewing the main library list which is where we can actually physically delete the files to the Recycle Bin from.)
11. Go back to your library view and sort your list by ratings. Highlight all the songs there with a rating of None and then right click to delete them.
12. They're gone, and you're done!
13. As a preventative measure you could Consolidate your library (Advanced/Consolidate Library) and then give all your MP3's a tag in the "Comments" field of something unique like say... "Permanent_File" That way if iTunes should somehow re-add files from somewhere else on your computer again and create more duplicates, you have a way of easily sorting and distinguishing which are the good files and which are ones that you need to delete. (Anything without your "Permanent_File" tag.)
Apple really needs to refine the duplicate detection and make it easier to get rid of them.
* They should make it so that iTunes checks ALL tag info in addition to the song's title when compiling it's list of duplicates.
* There should be a "Select all checked files" option. (So as to avoid the whole star rating thing mentioned above.)
* There should also be an option to remove the files from your library when deleting songs from a playlist view. (eg: A prompt "Delete from this Playlist or Delete from your Library/iPod?"
Custom PC Windows XP Pro Got myself a refund on Vista. Getting a Mac!
Custom PC Windows XP Pro Got myself a refund on Vista. Getting a Mac!

My pet peeve is that when you have a studio recording
and a live recording of the same song by the same
artist, iTunes considers them to be duplicates.
Yeah, that's exactly what I'm saying.
The best way to bring your suggestions to Apple's attention is by submitting the form on this Support page .
I took your suggestion and reffered them to this page. Maybe they'll listen. (Heck I managed to convince the Google Earth team to move the on screen controls to the upper right corner from the bottom center to accomodate dual monitor users.)
Custom PC Windows XP Pro Got myself a refund on Vista. Getting a Mac!

Tips to deal with the appalling wifi on iPhone 5 since 6.1 update?

Hi guys I'm aware there are hundreds of threads on this issue and various different ways of addressing it. I just wanted the most up to date tips and fixes and to share my symptoms.
Ever since I updated to 6.1 my home wifi connection has been horrific and it's really starting to get annoying now when you pay so much for your phone and also internet. I have no problems with 3G and I even connect to wifi networks whilst at work which are a good speed. But as previously stated it can take ages to load pages if at all when I'm connected to what in theory I should think should be my most reliable network, it's extremely frustrating.
Like I say if people could give me a check list of things to do or check to remedy the problem it would be greatly appreciated.
Regards,
Gary

Restore the phone using iTunes. If that doesn't fix it, google "iPhone DFU mode" and restore it in DFU mode. Set it up as a new device and test it before attempting to restore your backup.

Any workaround for dealing with MS Word docs without using MS Office?

Hi, I've been emailed a highly formatted MS word document that I need to fill in and email back. Trouble is that my copy of Pages 08 says 'text frames aren't supported and have been converted to text boxes' - the result being that the form is jumbled up to say the least and unusable, is there a workaround without having to use Microsoft word itself?
thanks
Simon

You could try http://www.openoffice.org , or
http://www.panergy-software.com/products/lp/we/gn_op.html
However with very complex formatting you may well find that it's just not possible for other programs to handle it.

I was doing some stuff with torrents and now pop ups are everywhere. I deleted everything I downloaded that had to deal with them but the pop ups are still occurring. Does anyone know what to do? I do have AppleCare and was wondering if they could help.

I was downloading some stuff off of piratebay and I downloaded utorrent. I went back on my MacBook Pro later and found a bunch of pop ups on safari and a completely different safari format. I reset safari cleared everything deleted the stuff I downloaded and they are still occurring. I was wondering if it is an easy fix and /or AppleCare might be able to help me. Do I have a virus?

I would agree with kevin_, it sounds like you have downloaded some adware.
Torrents and piracy sites are extremely dangerous, and you should stop downloading from such places immediately! They have become very common sources for adware and malware on the Mac... really, the only common source, to be honest. You practically can't swing a stick in such places without hitting something malicious.
Stop downloading stolen content, provided by untrustworthy criminals, or you'll have this problem repeat itself. Next time it might be worse than simple adware.

Any way to deal with unpublishable photos?

I'm writing a publish service where some photos in a smart collection can not be published. In my case, its because they're buried in a collapsed stack in their folder of origin, but I can imagine other reasons why some photos may be unpublishable, like profanity in the keywords, or too small... Presently, I'm just ignoring some photos, but then they always look like they need to be published, yet they can't be.
Any ideas?

You mean - one image in a vault, one in a library? Or duplicates in the same library?
Photo Sweeper can scan several libraries or folders at the same time and display the duplicates side by side to let you pick which to keep. You can define rules to mark photos for automatic deletion as well.
http://overmacs.com/photosweeper.html

Any APIs to deal with screensavers, wallpapers and ringtones?

Hello,
I would like to ask are there any APIs to handle the launch of screensavers, change of wallpapers and ringtones??
Thanks a lot~

in java basically no.
there might be a vendor specific implementation that allows access to a device's screensaver i.e..

I'm using motu 896mk3 to record my drums. any tips to not make them sound like i'm in a cave. also sounds this way when recording guitar tracks. the overall sound is "bassy". thought maybe a setting or something else to brighten up the mix?

as the topic stated. any advice? i'm using logic x.

Hi,
http://youtu.be/IPtlLSb_y-s
You may disregard the Focusrite adverts and concentrate on what they say about microphone placement and room treatment in particular.
Have a nice day!

.mts files. Any tips on dealing with them/converting them.

Similar Messages

Maybe you are looking for