.mts files - I thought Final Cut Pro 7 was going to have

a solution for these.... If I had the camera, I know I could use Log & Transfer, but I don't. I do have the entire folder on my hard drive, but they still won't import. Is a conversion software like Voltaic the only solution here?

+I thought Final Cut Pro 7 was going to have a solution for these....+
Hmmm... wishful thinking maybe, it was never suggested by any official source that I heard of myself. Still, I guess thats besides the point at this stage.
+I do have the entire folder on my hard drive, but they still won't import.+
Joel, are you certain you have the full (bdmv) folder containing all the various subfolders of which the stream (mts clip) folder is just one ... or is it just the folder with the mts files in?
+Is a conversion software like Voltaic the only solution here?+
Check out Wally's 2 consecutive posts here (especially the 4th method) ...
http://discussions.apple.com/message.jspa?messageID=9966355#9966355

Similar Messages

  • "Error: Final Cut Pro was unable to read the movie file just captured"

    Hello everyone!
    We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.
    Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
    "Error: Final Cut Pro was unable to read the movie file just captured"
    We reinstalled the Final Cut Pro software all over again thinking that maybe the software got corrupted and we also rectified any disk permissions for the hard drives.
    Any ideas?
    Thanks
    Efrain
    G 5   Mac OS X (10.4.8)  

    We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.< </div>
    You eventually want to figure out how that happened and make sure you fix it.
    Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
    "Error: Final Cut Pro was unable to read the movie file just captured"
    <
    You reformatted the external drive, yes? You might not have used the correct initialization setting. Should be Macintosh HFS, journalling is optional. Or you have a drive formatted for Winderz.
    Aside from incorrect drive formatting, we have seen this error if the capture is incomplete or improperly terminated.
    It's not an FCP issue, it's hardware.
    bogiesan

  • How Direct Import .AVI file in to Final Cut Pro 6

    How can i Direct import .AVI Files in to Final Cut Pro 6..
    Please Tell me Any kind of plugin or application or codec.....
    thankyou very much

    The AVI file extension merely indicates that the video contained inside could be from any number of codecs; like a QuickTime .mov, .avi is just a wrapper. Saying you have an AVI file is much like saying you have a car ... it doesn't really tell us anything specific. You need to find out what codec it actually is, then you'll know whether or not it can be imported into FCP without conversion.
    But you'd be better off converting it to a QuickTime codec that FCP works with natively prior to importing.
    -DH

  • How do you import a .png file into the Final Cut Pro X and at the same time keep the file's original transparency settings?

    How do you import a .png file into the Final Cut Pro X and at the same time keep the file's original transparency settings?

    Go to the Info inspector for the still image and in settings select the alpha type.

  • I am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

    i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

    I believe there is no  "Export to Tape"  feature as appeared in legacy FCP.
    SORRY! Just noticed you are using FCP 6.
    You need to ask this question in the Final Cut Studio forum.
    Message was edited by: Ian R. Brown

  • Final cut pro requires you to have a quartz extreme graphics card

    When I open Final Cut Pro, it says final cut pro requires you to have a quartz extreme graphics card. However, I have used the same thing for over a year already without any problems! Please help!
    It's an iMac 27inch quad core late 2009

    I bet you used Software update to download a few items recently (including a recent system update), and have not yet restarted your Mac. To confirm this, launch software update, and follow the instructions. Once you restart and the install completes, relaunch FCP, and you'll probably be good.
    (I just did that to myself the other day).
    Hope it helps!

  • How much does it cost to upgrade to Final Cut Pro X? I have Final Cut Studio

    how much does it cost to upgrade to Final Cut Pro X? I have Final Cut Studio

    There is no upgrade. One price only. $299.

  • Hi there. Does anyone know how I will get my hands on English version of final cut pro x, when I have a French Apple account?

    Hi there. Does anyone know how I will get my hands on English version of final cut pro x, when I have a French Apple account?

    Hello everybody who joined in the other day/night!!
    I'm pleased to announce that Final Cut Pro X are available  (yes today in App store, yehaaaaaaayyyyyy!!!) in French, English, German & Japonese... Regardless of what country ones iTunes account is in....
    Great news!!!!! And can't wait tio get started!!!!!
    Have nice day y'all
    Luv Hanne S

  • How can I playback blu-ray .img files generated by Final Cut Pro X?

    When I share a Final Cut Pro X project in Blu-ray and I set the output device as Hard drive (blu-ray), it creates a blu-ray image with a .img extension.
    By the way, the project's clips are AVCHD (.mts extension) and the settings are set to 1080i (1440x1080 25i).
    My question is: can I playback this file without having to burn a blu-ray disc?
    I've been looking for information, and some people seems to playback blu-ray .iso files.
    And: would Compressor 4 solve my problem? (is there anyway in Compressor to create a .iso image or something easier to play?).
    By the way, I do have access to both Windows and Mac computers.
    Thanks in advance,
    Pol

    Thanks for the answer.
    If you own Compressor 4, could you tell me if it includes an option to generate a .iso file instead of a .img?
    (here's information on how to playback a .iso).
    Thanks,
    Pol

  • How to import .mxf files to Apple Final Cut Pro X?

    Hello,
    I'm in the process of purchasing a Canon XF305 Professional camcorder which uses MXF format files. I am using Apple Final Cut Pro X with Lion operating system. Is there a tool which can help me when ingesting with Final Cut Pro X rather than earlier versions of Final Cut Pro.
    Thank you very much,
    Thomas

    Dear Thomas,
    As far as I know, there is few programs which natively support MXF video converting or processing. I got my new Canon C300 several days ago, I looked around for a nice tool for my c300.
    I tested one professional MXF Converter on Mac. The program seems nice. It natively supports my C300 camera and encodes MXF footages to Apple Prores which FCP X likes best. I found it in App Store. You can download it for a test. In addition, I saw the project about mxf column in a blog , it also seems to have a lot of solution, if you are interested, you can give it a try  http://mts-to-aic-converter.com/mxf-column/ 
    Hope this program helps. Happy Every Day.

  • MP4 (MPEG-4 MOVIE) FILE IMPORT TO FINAL CUT PRO X

    I have some MP4 files I am unable to import into Final Cut Pro X from a Hard Drive.  1920x1080, Codecs: MPEG-4 Video, Linear PCM, Audio Channels: 2 Total Bit Rate: 35,253 ...
    Any suggestions as to what steps I need to take to be able to import them into Final Cut Pro X ???

    Okay, I fugured it out  ... the footage I was provided was from a Sony XDCAM source  ...  the link below gave the information needed  ...
    Final Cut Pro X: Importing Sony XDCAM media     http://support.apple.com/kb/HT4724 
    Just follow the instructions ...  the sony documentation for the two downloads indicated that this would not work for FCP X ...  but it did work fine ... 

  • Sending Audio Files back to Final Cut pro, nothing.

    Simple issue:
    I send from Final Cut Pro To Sound track pro some audio files along with the clip.
    I edit it in Sound track Pro, and save (just like in the tutorial) then I quit.
    I go back to Final Cut Pro and what do you know, the file that I sent HAS NOT BEEN EDITED!
    Some one help.

    I tried the same thing earlier in the year, and when the sound came back into FCP, it was corrupted!
    Since then, I don't know if this is a good option, but it seems to work fine:
    Once I have finished my editing in FCP, I export the soundtrack into an AIFF. I edit the AIFF via STP, and when finished, import it back into FCP.
    I'm not experienced enough to know if this method is bad, but it has worked well for me!

  • Mpg files put into final cut pro 6 come out blurry in Quicktime export.

    I'm a noob. I'm trying to make a compilation of mpg files. My students created animations in Blender. I want to put a video together to showcase their talents.
    Everything I've tried with FCP 6 and mgs come out blurry.
    Mpg Dimensions are 640 x 480. Codecs: MPEG2 Muxed
    Should I be working in 720x480?
    Thanks

    You can't really use MPEG 2 files in Final Cut Pro -it's not an editing codec.
    A list of compatible codecs can be found in FCP's Easy Setup menu.
    Is MPEG 2 the only export option from Blender? I'm am not familiar with the product.

  • Are microsoft movie maker files compatible with final cut pro files?

    I would like to know if microsoft movie maker files are compatible with Final Cut Pro?
    Thanks,
    elemir

    depends on how you're outputting. .wmv I don't think so.That's pretty much a dead end format.  mp4 might be, but i'm not sure if movie maker outputs them. .avi might be, depends on the codec used.
    Avoid .wmv, apple products don't play well with that format (never have) and aim for some other output type. Then on your mac, if you don't already have it, if you don't already have it, get the free converter mpegstreamclip and see if it can convert your movie maker output into something final cut will input. DV files are good, as are .mov files.

  • How do you import a Widescreen Quick Time File captured by Final Cut Pro?

    Hi
    Here's my workflow: I captured HD 1440X1080 footage in Final Cut Pro. FCP creates a folder of Quick Time Files in a Scratch Folder. A month ago, I had no problem importing the Quick Time files into IMOVIE HD 6 and preserving the widescreen format.
    Now, for some reason, when I import the same files into IMOVIE HD, it is squashing the image (stretching it vertically) and leaving a gray bar on the left side of the screen.
    Can IMOVIE HD import Widescreen QT files created by FCP? If so, how?
    All help appreciated.
    Phil

    iDVD does everything automatically for you. With DVDSP and Compressor, all steps must be done correctly. The trade off is that you achieve better quality using Compressor over iDVD.
    1. First thing to do is export your sequence as an uncompressed interlaced 25i 720 x 576 16x9 Anamorphic QT.
    2. Determine your optimal bitrate by using a bitrate calculator. Here's a good one. Remember you need to account for all video on the disc, including motion menus.
    http://www.videohelp.com/calc.htm
    3. Bring your down converted QT into Compressor and use the manual settings set your bitrate. Also encode out a Dolby digital AC3 file. These files take up less bandwidth than uncompressed audio. Also remember to match your upper fiiled dominate filed order as well in Compressor. This must be consistent throughout the export and encoding stages.
    4. bring your encoded video and audio files into DVDSP and author

Maybe you are looking for

  • Can we stop users from Split Coding Requisitions in iProcurement?

    Is there a profile setting that prevents users from being able to split code charge accounts on requisition lines in iProcurement 11.5.10.2? Thanks Jim

  • Configuration Steps for Decentralized Adapter Engine

    Hi all, What all configuration steps are required to make Adapter Engine as Decentralized AE. I have made required changes in SLD DataSupplier in Visual Administrator. what more configurations have to be done? On SAP XI Server and Decentralized Adapt

  • Multiple Macs: Disk Images or Clones

    Greetings, I have a MBP that is my main machine. The wife has an iMac with an older OS. I also just bought a Seagate FreeAgent Go for Mac (320G), and want to create backups of both machines on this external HD. Reading around, I know I can create dis

  • What causes this file to be so big?

    Hi. This morning I created a little logo for work in A4 In consists of two lines, a word in helvetica and a gradient red through to transparent, about 4 cm x 4 cm Thats it, and the files is 64megs. Whats all that about?

  • Quesion about dbms_advanced_rewrite ???

    SCOTT@oracle10g>alter session set nls_language=american; Session altered. SCOTT@oracle10g>create table tt1 as select * from user_objects; Table created. SCOTT@oracle10g>create table tt2 as select * from dba_objects where owner='SYSTEM'; Table created