.mts files no longer working after erase and re-install.

I've been having a ton of crashes with Premiere CC. Now, after an erase and install I can't get .mts files to import natively. I get an error "file not supported" which has never happened before.
Am I missing something?
Latest version of Premiere CC, Mac pro retina. All software up to date.

Might want to read this;
Audio and Video glitches | AVCHD footage 

Similar Messages

  • My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive.  Can't get it to run Hardware Test.  Disk Utility says disk OK - files are there. What can I do?

    My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard.   I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host.  But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning.  I can't get it to run Hardware Test - just get the white screen.  If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

    Hi-NRG Bwoy wrote:
    I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
    Reet the SMC and the PRAM
     Cheat sheet to help diagnose and fix your Mac
    Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
    clean the disk.
    If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    How to erase and install Snow Leopard 10.6

  • Time Capsule no longer works after unplugged and plugged back in

    See if you can follow this.
    When i first got the time capsule about 2 months ago i had problems right off the bat. I changed the WEP to a WPA, plugged the time capsule into the router instead of going wirelessly and used it to extend the network. After several time of reseting the capsule, changing settings and passwords, and waiting several minutes for the airport utility to say it could not connect i finally got it to work.
    Now, the other day i went to move my desktop to another outlet, so everything was unplugged via the surge protector, for about 5 minutes then plugged back in. Now the capsule no longer works. I was getting the same messages as two months ago, as if everything was reset in turning it off for a minute. I went through the same processes as last time to get it to work, but not this time. After waiting at the airport page for a few minutes it says that internet connection is the issue. Now the capsule is about 1 foot away from the router and plugged in, and i have internet connection to the desktop and my macbook pro.
    Does anyone have any ideas, omitting the stupid suggestions web pages tend to give, such as is it plugged in? is it turned on?
    Help is GREATLY appreciated.

    "plugged the time capsule into the router' try bridge mode and also configure its wireless setting

  • Livetype will not install after erasing and re-installing Tiger

    Hello,
    I recently had to install a new hard drive, of which I partitioned, erased and installed OS X Tiger onto my PowerBook G4 15" (1.67/1.5 GHZ).
    After all that, I tried re-installing FCP (5). The FCP part worked, but Livetype refused to be installed. So I searched for updates, and found an OSX Dual update, FCP update, and Livetype update, all of which were updated successfully. But Livetype will still not install for some reason.
    Any ideas?
    Thanks
    Shawn

    Sorry, should have been more articulate in my description.
    During the installation of Livetype, after choosing the destination for livetype to be _Application support_ and starting the installation, the program goes up to 20% during the writing files procedure... and stops.
    Says Please try install again.

  • ICal will not sync in 10.5.5 after erase and new install!!!  HELP

    I had to do an erase and install of Leopard, and now my iCal will not sync.
    Thanks to it being such a great application I now sync my iMac at home, my iPhone, my iBook, and my G5 tower at work all to each other, I now depend on it for client meetings and personal dates and just everyday functioning!
    How do I fix this? What do I need to do to get my me.com calendar in sync with my iMac and the rest of my computers and iPhone.
    I appreciate any and all advice to get this working again. Monday's already here!
    APPLE please do not ignore this!
    Thanks
    Steve Amaral

    Latest update 5 July. I just downloaded 10.5.4 and at least ical opens! The icon is still grayed out (not sure if that is a sign and symptom of some other problem) Not sure how well the program will work with Entourage and the rest of the applications after reading other posts about 10.5.4 Thanks for all the posts and I followed them to a T with no success until I downloaded 10.5.4
    NOTE TO APPLE: I bought this machine to avoid the Window problems! It's nice to see you guys are following the leader! This Leopard OS is a mess! I regret nearly every day I made the switch! The IBM compatible laptop I bought after buying this machine (that's right no multiple mistakes) works flawlessly with Vista.

  • Firefox will no longer work after uninstalling and reinstalling

    I am running max osx 10.6.3 and when i closed firefox i couldnt reopen it unless i force quit the app or quit it completely before closing the browser so i uninstalled and then reinstalled but the problem persisted so I deleted the contents of the preference folder after installing then reinstalled but now everytime i try to open it it gives me an error saying "a copy of firefox is already open. only one cope of firefox can be open at a time". I restarted the computer several times but that didnt fix anything and i can no longer start firefox. I am assuming its because there is a file somewhere telling firefox that it is open but I can find it.
    == This happened ==
    Every time Firefox opened
    == I reinstalled firefox ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    I cant really get into firefox to disable or uninstall them and while an extension may have been causing my original problem, it isnt anymore. Now its a problem with the firefox system files but I guess I may be wrong.

  • Mpeg files no longer work in QT and FCP

    I was forced to do an archival install a few weeks ago and, since then, none of my mpeg files will open in Quick Time 7 Pro or Final Cut Pro. When I try and open the file with Quick Time Pro, I get error message -2048. All these video files worked before, and none of them work now. Any thoughts?
    Ben

    So I found the VLC program, and it seems to be playing all the mpeg files fine (thank God) so I'm thinking that it really is missing a component. I heard through the grapevine that owners of final cut pro should automatically get the mpeg 2 component, so I technically should have it, but I didn't see it in my quick time component folder. I'll go ahead and list everything I've got in there.
    3ivx D4 4.5.1 for OSX
    AppleIntermediateCodec.component
    DivX 5.component
    DesktopVideoOut.component
    DVCPROHDCodec.component
    DVCPROHDMixer.component
    DVCPROHDVideoDigitizer.compoent
    DVCPROHDVideoOutput.component
    DVCPROHDVideoOutputClock.component
    DVCPROHDVideoOutputCodec.component
    FCP Uncompressed 422.component
    LiveType.component
    Motion.component
    I don't know if this is related, either, but I can't seem to take movie files that I've made with Quick Time Pro and my iSight and put them into FCP. It keeps saying "File Error: Unknown File" (even though it's a quick time file). As far as the update goes, I already have QTP 7.0.3. Should I try installing the update again?
    B

  • FMP files no longer work after transfer

    Hi All, I have a number of FMP 11 database files on an internal 2TB WD Black drive that I backup to an external WD 2TB Black drive connected via eSATA. When I try to open the files on the external I get an error message saying that the file could not be found. All of the other file types on the drive appear to work fine, (i.e. .mov, .fcp, .pdf, .psd, .avi, .mp3 etc) I have run Techtool Pro 5 and Drive Genius and the only errors were XML parsers in Dreamweaver. Has anyone any idea why this could be as I am now worried about my backup.

    Hi The hatter, 1) I use Carbon Copy Cloner
    2) Yes they are the WD2001FASS
    3) They are used with the Newertech MAXPower PCIe eSATA controller
    4)I am using the Newertech Voyager dock for these backups which has USB and eSATA
    I use the same dock for two of my other internal drive backups, my system clone and temp storage drives, I know that the system clone is OK as I have had to restore from it. This backup is for my WIP drive which I back up to one other External drive through the same eSATA controller, this is to a Newertech Ministack 1.5TB. and this backup is also fine. The only reason for the dock backup is that I take this offsite.

  • MPEG-2 files no longer working after Software update

    Quicktime 7.5 has been installed for a year and played .mpg files just fine up until today. Now it gives a "this is not a video file" error. The MPEG StreamClip Application for converting files also magically stopped accepting MPG unless I fork over $20 for some MPEG-2 component! What the heck
    Graphics card was upgraded from a 7300 to a 8800 yesterday and there were some Quicktime things in the Software Update which ran last night. Why would either of those eliminate my ability to view MPGs? Final Cut also quit functioning with those files.
    Need some help here fast!
    Thanks

    Sure enough! Went back and put the DVD in. One of the first thing it auto-installed was the component. Cancelled out the rest of the install and good to go.
    thanks

  • Broadband phone no longer working after Infinity i...

    I use my broadband phone supplied with the hub as an extra phone, mainly to recieve calls downstairs as the main phone is upstairs, but it is no longer working after BT Infinity was installed, upgrading from BT broadband.
    Any solutions?
    Thanks

    If its the phone you used with the old none infinity hub this may be of interest
    http://community.bt.com/t5/BB-in-Home/BT-Infinity-and-No-Hub-Phone/m-p/39358
    If any post helps tick the star box on the left
    Just cause Im paranoid dont mean they are not out to get me

  • Checking out Pdf files to Local draft Folder option no longer works after office 2013 installed.

    Checking out Pdf files to Local draft Folder option no longer works after office 2013 installed.
    Summary :
    We are using SharePoint 2010 Ent edition and users were able to checkout Pdf files similar to local drafts folder like any other office file without any problem when they used office 2010.
    i.e
    Unfortunately ever since their machines upgraded with office 2013 recently , this functionality completely stopped working for PDF files. This has now become a big problem for the users when it comes to check out and replace PDF files.
    All browser plugins required for this functionality (i.e    SharePoint OpenDocuments Class ) are all available and active. All document libraries are configured to Checkout is required for editing files. Browser version
    used at the moment is IE9 (32 bit) version with windows 7. 
    Can anyone please help with this issue and any help to get away with this problem is much appreciated.

    Hi,
    Based on your description, my understanding is that the PDF files cannot be checked out to local drafts folder after Office 2013 is installed.
    Did this issue occur with Office files?
    I recommend to check if the Office files can be checked out to local drafts folder with Office 2013.
    And it is recommended to use Office 2010 with SharePoint 2010 for best practice.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

    drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

    Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.

  • We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    Zap the PRAM and Reset the SMC, then try again.

  • Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

    Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
    Ron Bell
    [email protected]

    Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
    I do not work for Mozilla but I do have experience of releasing software for public usage.
    Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
    You can go back to the old version of Firefox but that won't always solve your problem.
    The web site below tells you how:
    https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

  • Canon iP2700 is no longer working after update

    My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2  from  https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
    tail -n 100 -f /var/log/cups/error_log
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
    D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
    D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
    I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
    D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
    D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
    D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
    D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
    D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
    D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
    The CUPS ownership of the USB device file seems OK:
    ls -l /dev/bus/usb/001/006
    crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
    I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
    EDIT
    I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
    Last edited by otx (2012-03-09 14:21:27)

    See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

Maybe you are looking for