MTS files not playing back in Elements 10

My .MTS file is juddering in Elements 10. I've rendered and adjusted the frame rate to 50, but the video is still juddering and out of synch with the audio. Any tips?

Hi,
Are you talking about Premiere Elements?
There is a separate forum for that - you will probably be best asking your question there
http://forums.adobe.com/community/premiere_elements?view=all
Brian

Similar Messages

.MTS files - Stereo playing back as mono

HUGE bone head move, hopfully someone has a resonably quick fix to offer.
Recorded video with the AF-100, .MTS file says stereo but only plays back in left channel.
Now after editing the project in an effort to fix the mistake,
In PPROcs5.5 I did the channel mapping to resolve this to stereo
so now those origanal .MTS files now play back as stereo.
Heres my problem.
In my haste to get this job edited I didn't pay attention to the audio tracks other than to sync the multiple cameras and tracks accordinly.
All of the origanal .MTS files were broken down into subclips , and those subclips are what are in the time line. (30 clips)
Those subclips do not allow me to change the channel mapping, the options are greyed out.
Is there a simple way to change these mono audio clips into stereo or at least play right & left or do I need to redo the whole project?
All resonable suggestions appreciated.

I think that what Harm was recommending was adding the appropriate Fill Left, or Fill Right Effect to get your 1-channel Audio Stream (in a 2-channel Clip), into both channels. Effects>Audio>Fill Left or Fill Right.
Good luck,
Hunt

Rewrapped AVCHD MTS files not playing correctly

I'm using a Panasonic HDC-TM700 camera to record 1920x1080 60p. The camera records to the AVCHD format which yields a .MTS file. Final Cut Pro X still does not support importing from this camera. I've tried the various tricks mentioned in these forums such as creating a camera archive, importing directly from the SD card, using Panasonic's AVC CAM restore tool, etc. Nothing has been sucessful, so it looks like it's back to re-wrapping the .MTS file to a .m4v file. To do this, I'm using the Rewrap2M4V apple script combined with ClibGrab as described in other discussions. My newly wrapped m4v clips play just fine in Quicktime Player. The movie inspector reports a FPS of 59.94 and a resolution of 1920x1080.
When I import these clips into Final Cut, however, I see two green or black empty frames about every 28-30 frames. This occurs when I'm previewing the clip from the event library and when the clip in in the timeline. The timeline is set to 1920x1080 59.94p, though I've tried 60p and saw the same behavior.
When I export the clip to a h.264 .mov file, I don't see the green or black blank frames, but the picture is garbled in those places.
For what it's worth, I've installed the updated QT codecs. Any ideas?

I don't know what conversion engine clipgrab uses, but i have had success with the old Final Cut Express using ffmpeg based software to re-wrap the .MTS files from my panasonic GH2. I use Media Converter (an ffmpeg front-end) and if you go to their presets page you'll find presets i made to do it. Give that a shot maybe. Another thing you can try to do if that still does not work is a 'standards conversion' of the re-wrapped video to ProRes in JES Deinterlacer.
good luck!

Certain Video files do not play in Photoshop Elements 13

Hi Forum
I have a problem whereby certain Video files do not play in Photoshop Elements 13 Organizer. The pattern seems to be they are .MOV files. But some files of the same type do play okay? So wondering why some are okay and others not?
I have installed a trial version of Premiere Elements 13 and ALL files play fine there. I understand Premiere installs all relevant CODECS to support all video formats, so why does Elements Organizer not make use of those CODECS?
Many thanks and Kind Regards
David

You can download the Flash 11.2 player via this direct link:
*http://fpdownload.macromedia.com/pub/flashplayer/current/licensing/win/install_flash_player_11_plugin_32bit.exe
*http://forums.adobe.com/thread/1022066
*http://forums.adobe.com/thread/889580
You need to uninstall the Flash 11.3 version if you downgrade Flash.
*http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html

.MTS files not working

Hi Everyone-
I just shot a short doc on the Panasonic GH2. I have all the .mts files imported into Premiere CS6 on a MacBook Pro. I have 16GB of RAM and the files are on a Thunderbolt drive. These files will not play back in real time, even when putting them on 1/4 resolution. I am not sure what I'm doing wrong. Also some of the files loaded, then went offline and now when I try to re-import them, I am getting a Premiere import general error. Any thoughts? I also tried to wrap the files using one of the many wrapper programs out there before importing, but I lost sound when I did that and I need sound for sync purposes. Any help would be great. I edited a video with Nikon MTS files a year ago that worked perfectly on this system. I am really at a loss and on a deadline. Thanks!

astanuga wrote:
.... Photorec, (http://www.cgsecurity.org/wiki/PhotoRec) despite the user interface,.... has anyone out there gone through anything similar, and did you have any luck recovering your files????
Photorec's interface is a Mac User's nightmare, indeed, because it is a Terminal.app only ... but free.
I did use it once, I deleted a file in camera - after pushing 'yes - erase it', I realized I deleted a very nice smile on that track.
so, in my case, the original SDcard existed, I immediately got it out the cam and let Photorec directly from card did its job.
only advice from here: use the original SDcard, no copies, no trashbins, no ... whatever. then you have a high chance.
and Welcome astanuga to the  boards ...

Sound Does not Play Back

I am playing recorded video from a Sony HDR-HC1 through the DV out and capturing in on location. All goes well(except for some red frame video) during capture, good video and audio. I captured three times. On one occasion the audio played back. The other two it did not. Audio will not play back in PP CS3. The file is an AVI T2. The same clips play back fine in Edius 3.6 with good sound.
Any tips on what is wrong?
Kent

Hey There and Welcome to the mac forum!!!!
Could it be possible that you moved or even trashed the audio files you were using? If so then they get trashed in imovie to.
Next time, transform the movie into a Quicktime movie (once you are completely done the project). Once you have done this, you can move or even trash any of the elements of your movie (even the footage) but this will make your actual imovie project useless (The Quicktime one will be fine).
I hope this helps,
-Hooked

Quicktime.mov not playing back from website

iWeb 3.0.4
I downloaded three .MOV to my site. One is playing back ok, the other two are only displaying the QuickTime symbol. I did empty the browser cache, but to no avail. Did check with server and the .MOV files are in the html folder, but not playing back. I also re-uploaded the questionable .MOV files, but it still does not let me open the files on my site. site name : bodoholst.com
thanks in advance

All three movies play OK for me.
The pages are slow to load as this method of adding them to the pages requires the movie file to download with the web page.
If you are happy to depend on viewers having the QuickTime plugin, this is a better way...
http://www.iwebformusicians.com/Website-Movie-Video/Poster-Movie.html
So that everyone can see your movies you really need to have flash fallback since there's still a lot of people around who don't have the QT plugin installed...
http://www.iwebformusicians.com/Website-Movie-Video/Flow-Player.html
http://www.iwebformusicians.com/Website-Movie-Video/Fallback-To-Flash.html
http://www.iwebformusicians.com/Website-Movie-Video/JW-Media-Player.html

QuickTime movie made in QuickTime 7 audio not playing back in qt 10

I made a qt using qt 7 pro, H.264 with the AAC audio compressor and that qt will not play back audio in QuickTime 10 which is what my client has on his computer.

The point being here is that I rendered out a movie in QuickTime pro 7 and the audio isn't being resolved in QuickTime 10, even on my own computer.
Does the audio play correctly in the QT 7 Player? Have you determined if this is a playback or a conversion problem? I asked about the source file since some source compression formats will not convert the audio using QT 7 Pro. In a similar manner, some AAC data rate and sampling rate combinations are not supported on the Mac which is why QT is programmed to disallow their use. (Unfortunately, I do not know what would happen if a source file using such audio settings were to be used as a source for a QT 7 Pro conversion.)
How is this possible and should I just remove qt10 altogether?
As already indicated, there are a number of "normal" problems that could give these results. In addition, QT changes made as part of the most recent Lion OS update seem to have had adverse effects on QT 7 Pro features (as evidenced by the loss of the "loop" playback feature and "green screen" problems on some platforms). As to the removal of QT 10, the embedded structures cannot be removed without corrupting the operating system. And, while the QT X player can be removed/deleted, why bother since you can just as easily opt not to use it for manual playback and restoring it, should you later change your mind, may present a problem.
I am a professional editor, have been working on Macs since 1992 (Avid and FCP7) and have never had a compatibility problem like this before within the Mac environment.
Have you made any recent changes to your normal work flow that might account for this problem and is the problem consistently repeatable?

Blackmagic 10bit files not playing

I have two identical G5 2.7 macs running 10.4.4, 2.5Gig Ram, QT 7.04, FCP 4.5, extra Maxtor 6L300S0 internal drive and an sd Blackmagic capture card with the 4.8.1r2 drivers. Mac 'A' will playback 10bit captured files in QT (from Mac 'A' and 'B') no problem from both the boot drive and separate internal drive. Mac 'B' will not play back the 10bit files in QT on either drive though if I attach a small SSCI raid it works fine. The Blackmagic disk speed app gives pretty much the same results on both macs, so I know the drives are up to it. I have a done a reinstall of the Codec but still no joy.
Any thoughts?

RGS54 wrote:
Wondering if some kind of preference setting/file is missing or corrupt?
Well it could be - because this isn't normal behaviour. If you want to try this, there are instructions in this FAQ. If this makes no difference, then it will be something inherent in the program itself causing it, and I'd suggest uninstalling and reinstalling, and seeing if that re-establishes normality.

Audio File Not Playing

Morning All,
A few weeks ago I took a load of video and audio footage for a video I need to make for work.
I did exactly what I have done in the past - set 2 cameras up for visual and use an external clip on mic, plugged in to a Dictaphone for audio.
I then drop all the files into PP and edit away. Everything has worked fine in the past.
Anyway, a couple of weeks ago, having done the same thing, I noticed that the Audio from the Dictaphone would not play back in PP. It works fine in everything else (Window Media Player, iMac Media Player, After Effects etc). The audio from the cameras play back, it's the audio only file from the Dictaphone that wont. Everything on the PC is up to date, in fact, I have since had a new PC.
I'm honestly struggling to figure out why the audio file will not play!

Another tiny update. I have found a .WAV file at 176kbps which plays (I think this came from a different source). The .WAV files I'm having problems with are 384kbps.
The dictaphone has the option of recording at the following:
32kbps
64kbps
128kbps
192kbps
384kbps
But as highlighted before, I have used the 384kbps files before without any issues.

Insert a clip into a new sequence, the clip will not play back

Macbookpro 8G ram twin 2.5 Intel, 1333 Mhz
I am an experienced editor coming over from AVID. This is my second project attempt in Premiere. First was fine. I imported clips that live on my hard drive. When I make a clip selection, mark the in and out and "insert into a new sequence, the sequence will not play back un less I render it first. I am talking about one (1) shot maybe 3 seconds long. I have done no other edits in the sequence and have added no effects but there is an effect icon on the clip in the sequence, This can't be right. It is not the way it worked for my first test project. It would take 40 hours to edit a 60 second spot… What has happened here?
Footage is 1080p 24fps. Short with a digital DSLR and Files are the same (.mov) as in the first project,

I have exactly the same problem. All of a sudden preview window is not working properly. In some projects it only plays audio with gray screen, in some it doesn't plays at all or plays audio from another projects. Sometimes preview gets frozen with the first frame in the project. I can however play video from Event Library, but without any sound. When I create new project and drag clips from Library, it plays with gray screen and again without sound. Restarting iMovie or Mac is no help. I'm using iMovie 8.0.6
Waiting for help desparatly, thank you

Images in iMovie not playing back

I added an image to a project I had already been working on. I then added an audio file to all of the images. When I hit the play button the image I added does not show in the playback but instead an image two away and then it plays the second and third fine. This happened to two images I inserted in the project.
I noticed that the recently added images in iphoto when I click the camera icon have a green check mark in the corner. What does that mean and is that stopping them from showing in the playback?
I would appreciate any help.

Fixed the issue myself. Here's a step-by-step because I what found online pertaining to this issue were not clear on how to fix it. (Note that this is what I did to fix the problems, some of the steps might not be strictly necessary.)
How to get movies to start playing back again in iMovie '09:
1.) Close iMovie.
2.) Delete contents of the "iMovie Cache" folder for the event that is not playing back correctly.
- There are were two files "Cache.mov" and "Cache.plist", I deleted both.
3.) Restart iMovie
This appeared to force the program to generate new files and start working correctly. From what I read on other postings it was probably caused by the program not closing properly, which I seem to recall it crashing on me or my wife a while ago.
@ Bengt Wärleby
I appreciate you taking the time to post a reply, but please try to read the question before you do so in the future. I had said that files imported from the same camera work correctly (i.e. the same file type/codec), so the problem is obviously not a codec issue. Furthermore, .mov is the extension for the QuickTime File Format (http://en.wikipedia.org/wiki/.mov).

Imovie not playing back video from one event

Select vidoes in iMovie '09 won't play back for me. All I get is a black box, no audio, no video. The issue appears to be confined to videos from one particular event. The preview shows up just fine, but no actual video.
The videos were taken and imported from the same Sony camera as the videos that do work. They also play back fine in Quicktime. The format is .mov. Any ideas?

Fixed the issue myself. Here's a step-by-step because I what found online pertaining to this issue were not clear on how to fix it. (Note that this is what I did to fix the problems, some of the steps might not be strictly necessary.)
How to get movies to start playing back again in iMovie '09:
1.) Close iMovie.
2.) Delete contents of the "iMovie Cache" folder for the event that is not playing back correctly.
- There are were two files "Cache.mov" and "Cache.plist", I deleted both.
3.) Restart iMovie
This appeared to force the program to generate new files and start working correctly. From what I read on other postings it was probably caused by the program not closing properly, which I seem to recall it crashing on me or my wife a while ago.
@ Bengt Wärleby
I appreciate you taking the time to post a reply, but please try to read the question before you do so in the future. I had said that files imported from the same camera work correctly (i.e. the same file type/codec), so the problem is obviously not a codec issue. Furthermore, .mov is the extension for the QuickTime File Format (http://en.wikipedia.org/wiki/.mov).

Hi Def video is jumpy and will not play back smoothly in FCPX

I have the latest version of Final Cut Pro X only an older, but fully compatible IMac, and have a new Panasonic AG-Hmc 40P video camera. I have shot video on my Gro Prop Hero 2 and the playback of the unedited video is perfect, but as I scroll through the unedited footage shoot by the Panasonic, the video is jumpy and will not play back smoothly. The video plays perfectly on the the camera in play back mode, but in FCPX it is junk.
Do I have an incorrect setting that is doing this? I adjusted the palynack in preference but that made no difference. I need help?

FYI...
There's a hidden feature in Mac OS X Lion that you can use to convert your video footage to Apple ProRes with very little effort and to the right specifications...
Bring your video footage into your desktop or hard drive and then select all of them, and then right-right click on one of them to bring up the options menu... select ENCODE SELECTED VIDEO FILES. Mac OS X will take care of the rest for you automatically.
If this option doesn't show up, make sure to install those codecs I recommendad earlier...
ProApps QuickTime Codecs v1.0.1
http://support.apple.com/kb/DL1396

Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

Not here; updated three systems without issues.
Can you provide more details on your system specs, the projects you're referring to, and what kind of behavior you're encountering?
Russ

MTS files not playing back in Elements 10

Similar Messages

Maybe you are looking for