.mts files out of sync audio when importing in Premiere Pro CC

When I import .mts files from my nxcam in Premiere Pro CC, the audio of the clips in not in sync. Can anybody help me with this issue? Thank you!

Hi,
Please try renaming one of the footages from .mts to .m2ts and then import in Premiere. See if that helps.
Regards
Sarthak

Similar Messages

How do I get audio back on single clip that loses audio when imported into Premiere Pro CC?

I've got one clip out of many that for some reason won't play any audio when imported into Premiere Pro. I am new to Premiere Pro so am hoping it's something stupid I've done, but this is a problem with just a single clip exported the same way as all my others, the original audio is loud (not quiet) and none of the FAQ issues seem to apply (ie I haven't muted the audio or anything stupid like that)
The clip was exported from Plural Eyes into a "master" Premiere Pro project where the audio is fine. I exported it as a short MP4 clip and if I play the clip in Windows Media Player the audio is there loud and clear.
But when I import the clip into a fresh Preimiere Pro CC project this clip appears with just the "film strip" icon on the far left in the Timeline panel, unlike other clips which have an icon that shows "film strip" in the background and "audio wave" in the foreground.
I'm hitting so many glitches with the CC editions of Premiere Pro and After Effects which have annoying inconsistencies between them I'm tempted to just go back to Sony Vegas Pro (single program, no hassle) but hoping most of these issues are down to "newbie incompetence". Very hard to understand why this one clip out of many should be giving me this specific problem though. Any ideas?

I'm getting so many weird results. Most go away by simply closing the project and re-opening and I only have 6GB memory but even so, I'm disappointed by what I thought was supposed to be more "world class" video editing software than Sony Vegas Pro which I found to be a lot more stable. Also struggling with differences between Premiere and After Effects. Every time I want to do something in Pro I seem to need to go to After Effects and vice-versa. After Effects lets me do more of what I could "just do" in Vegas Pro timeline, but it's hideous for lining up audio and having to render anything in RAM to even get a clue as to what a change has done. Need to add Audition to the long list as well I suspect. Fun times!

How can i fix out of sync audio when watching any video online, such as Netflix or YouTube?

How can i fix out of sync audio when watching any video online, such as Netflix or YouTube?
This recently started to happen, never used to happen before...strange.
Help Please!!!

Cut up the 4n audio clip and synch it to its respective clips.

Phantom Flex footage dark when imported to Premiere Pro

Hi everyone (and hopefully Adobe Staff, also),
I am aware this has been posted before, though from what I can see no one, Adobe Staff or users, have found a solution. I am hoping we can change that!
I recently directed a Music video that was shot on the Phantom Flex. Everything went smoothly and after dropping the 3TB of footage via Seance (program by gluetools for Mac) I am now faced with a problem. While all the footage looks fine in Seance and on the Finder; when imported to Premiere Pro (CC v8.1, Caravan (latest update currently) it goes very dark, blue and flat. Premiere Pro is interpreting the colour/luma of the footage wrong.
Adobe states that Premiere Pro supports Phantom Flex .cine files but it seems that while you can edit with them, the colour/luma is interpreted incorrectly. Many other people also seem to have this problem.
These images below are all screenshots from Macbook Pros, one with ‘Glue Tools Phantom Cine Flex 4K’ installed (the gear house’s laptop) and one without (mine).
I need to find a way to get Premiere Pro to interpret the colour/luma properly in Premiere Pro to edit the project, it seems the Glue Tools plugin is not the solution I was hoping for, as some people have suggested elsewhere.
Is there a way to fix this within Premiere Pro or a plugin etc?
Has anyone successfully edited Phantom Flex footage in Premiere Pro?
Any help would be extremely helpful as I am really stuck here.
Thankyou so much.
Here is an example with some footage shot by the crew before me (still left on one of the cards), as you can see it is not just my footage that isn't working in Premiere Pro.
Thankyou,
Jack

It looks to me like Seance (and Finder) are applying a LUT to the footage, whereas PP is showing you the flat image as it was actually recorded, which is normally the desired result. Was there a LUT applied in the camera viewfinder or on-set monitor, something you might also apply in PP?

HELP .... HD FILES OUT OF SYNC AUDIO&VIDEO

Hi, everybody. This is my problema.
I Have some files in HD, this files plays without problem in Quicktime,
but in FCP are out of sync audio and video. I have this problem only with a HD Files. About a week this worked fine in FCP, but i charged FINAL CUT STUDIO and the problem apears.
PLEASE HELP ME.

Ok thank you SHANE for your answers.
I didnt explain the situation complete, sorry.
This is the story:
Im a new in a MAC WORLD'S and of course in a FCP too.
I never edited in HD (HDV1080i SONY HDR-FX1)
But i have to work ...
I HAVE a G5 QUAD CORE 2.5 512 MB RAM
and i buyed final cut studio 5
I installed the FCP Version 5.1 and i dont have any problem with captures HD FILES, editing or playing in FCP version 5.1 ** BUT*
I updated FCP 5.1 to 5.1.2 and the problems appaers
only in HD 1080i FILES the audio is out of sync video in a VIEWER and CANVAS
Some people says me that problem is RAM problem (may be i ahve 512MB)
But i think
1. May be is a configuration problem OR
2. Software problema
I hope be explicit.
Please help me.
SORRY for MY English.
Gabriel

Out of sync audio when trying to capture from digital 8 camera to quicktime, please help

Just trying to capture hi 8 tapes using a sony digital 8 dcr-trv355e pal into quicktime;
great clear video but audio becomes out of sync like a bad kungfu movie,
contacted apple they tried to help, but they dont really understand issue
there are lots of people out there that are trying to digitise old analog video;
I have fcpx and imovie they both play the old video via the digital 8 camera but cannot capture;
that is why using quicktime; thanks!!

Yes i think its something to do ith the fact its a wmv file, when i use mpeg footage it exports fine.
basically, no matter how long the video, the video is out of sync...its weird
i've decided the best thing to do is leave quicktime and export using windows media instead, that seems to give me a better looking picture witha small file size anyway
thanks for your help though!

Out of sync audio when burning a DVD with iDVD

Hello Folks,
I'm trying to burn 3 - 1 minute quicktime files to a DVD using iDVD 7.1.2 and everytime I burn a disc the sound is out of sync. It seems to speed up and finish about 10 seconds earlier than the video. When previewed all is fine. I have checked the 3 quicktime files and they are perfectly in sync when played. Any suggestions ?
Thanks

Hi Bengt,
Thanks for replying ! I spoke with tech support and we tried everything including saving it as a disk image but after the burn it still was out of sync.
Then we tried creating a project in i Movie and then imported (shared) the project into i DVD and it worked !
This was a frustrating issue to tackle but I'm ready for it if it happens again.
Thank you very much for your help. Have a great day.
Best regards,
Joe F

Out of sync sound when import mpeg4

I've import mpeg4 file from my Flipcam. I just wanted to make tigher ins and outs. But when I pull it into to timeline - the sound is out of sync. Any ideas why?
Thanks in advance.

MPEG 4 is not an editing format.
Convert your video to one of the codecs found in Final Cut Pro"s Easy Setup menu.
Does this camera shoot HD or SD?

AVCHD to Blu-ray yields out-of-sync audio when not using TS

I have a need (won't go into too many details) to render my AVCHD project as separate M4V and WAV files; I can't have the output be multiplexed as a TS. However, the audio is horribly out-of-sync unless I output as a TS. For example, if I load up a timeline with ~40min of clips from my Sony HDR-CX12 AVCHD camcorder and render as Blu-ray H.264 1920x1080i, non-multiplexed, with PCM audio, the resultant WAV file is a full four seconds shorter than the M4V file! Ouch!! I'm guessing each AVCHD clip has just slightly less audio than video, and that it just adds up in the end, but why can't Premiere accomodate this? Is there a way to have it introduce delay at each cut? Obviously, the packetizing/multiplexing process for a TS accounts for this, but again, I can't use a TS; I need a WAV file that's in step with the video.
I also tried rendering a TS (which plays fine and doesn't have sync issues) and then demuxing with xport.exe, but this leads to the same problem.
Thanks for any suggestions!
Cheers,
Aaron

> Could this be a DF versus NDF issue?
Hmmm... every setting and Properties window shows 29.97... anything else I should look for?
> use a Time Stretching effect
I'll keep that in my back pocket for now. Doesn't seem like I should have to go to that length, however, but... Assuming the error in the source is relatively constant per AVCHD clip (maybe not a valid assumption, but seems reasonable), then the stretch effect would result in audio that was more or less out-of-sync depending on the density of cuts on the timeline.
Is it possible to create an audio-only TS using Premiere? Something that preserves the timing information? Seems not, but maybe there is. When I uncheck "Export Video", the option to create a TS seems to disappear :-(
Cheers,
Aaron

Is out of sync audio because of Final Cut Pro X or DVD-R 8x?

Hi, I tried burning a 2 hour DVD straight from Final Cut Pro X (with it's featured menu). I used an Imation DVD-R 8x, and the burn went through successfully. However, the footage turned out pixelated and I noticed about halfway through that the audio was getting out of sync. I went back to check my sequence in FCPX to make sure I hadn't made a mistake and everything is alright. Was this an issue with the DVD I was using, or with FCPX's DVD exporting?

In FCPX, Share>DVD>Settings>Output Device>Hard Drive. That will make a disk image.
If you have iDVD, great choice. Just Share>Master File, and brong that into iDVD. The iDVD app will do the encoding and give you a disk image option as well.
Russ

Files seems to skip frames when importing into Premiere Elements 10

I am importing .mts files from a sdhc card. When trying to import the .MTS Files into Adobe Premiere Elements 10 it skip frames at clip transitions. When i place the files onto the timeline it looks like a 'jump' between clips, as if frames were missing. The same happens when I import .vob files from a dvd. A long seqence gets interrupted by a quick drop in audo and a quick jumpcut. How do i fix this ?

As John says, matching your project settings to your video is vital to a successful editing experience. If you've got a match, you will NOT see red lines above your clips when you add them to your timeline. Is that the case in your project?
Also, AVCHD video often requires at least a quad core or i7 processor with a good load of RAM to edit. If you don't have a powerful, well-tuned system, it could well be that the skipping you're seeing is just your computer unable to process the video data fast enought.
How fast is your processor and how much RAM do you have? What OS are you running?

Still image size when importing to Premiere Pro CS3

I was wondering if someone could help me. I do a lot of Still Image Slide shows with music and all that jazz and I used to use Premiere 6.5. When I would import the still images I could just lock the aspect ratio and it would automatically size the picture to fit the screen. I recently upgraded to CS3 and when I try to import a photo it imports it at actual image size so if the pic to too big it just looks zoomed in. I'm wonder if there is a setting in I can adjust so it autosizes the pic like it did in version 6.5? It may sound lazy but I do these with a lot of picture and I don't have time to adjust the size of each photo in Photoshop prior to import.
I have figured out a temporary workaround where I import the files into 6.5 and then open the existing project in CS3 but my new computer runs Vista and it's not allowing me to install 6.5 on it. I would appreciate any help.
Thanks.

I copied this from the help.
Scale assets automatically
1 Choose Edit > Preferences > General (Windows) or Premiere Pro > Preferences > General
2 Select Default Scale To Frame Size.(Mac OS).
3 Click OK.

Input video appears stretched when imported to Premiere Pro CS6

I'm on a beginner level on Premiere Pro so please be gentle if this question is very basic. I'm trying to make a video that preserves the input video resolution exactly. My input video was an MP4 movie with resolution 1440 x 1080. It's an iPad screen recording using X-Mirage software. When I opened it normally in quicktime, it didn't seem stretched. However, when I imported the clip into Premiere, the clip appeared stretched. I checked the Properties of the clip and it turned out to have Pixel Aspect Ratio of 1.3333, which meant the pixels were stretched. My output sequence was also stretched out because of this, even though the output indicated that the resolution is the same: 1440 x 1080. I tried to comply with "Clip Mismatch Warning" and the result was still a stretched version. Please help!

Hi,
In premiere pro, you will see sequence on the top. Click on sequence and from the drop down select sequence settings. Under sequence settings there would be a tab of pixel aspect ratio. Try and change it to d1/dv ntsc widescreen 16:9 or hd anamorphic.
Check if it makes any difference.
Thank You
Arjun

Encore CS6 crashes when importing from Premiere Pro CS6

When sending a project to Encore as a Dynamic Link from Premiere Pro, Encore hangs then a message pops up that it has stopped responding then closes. How do we get this to work?
The computer has an Intel Core i7 processor, 16GB of RAM and is running Windows 7 Pro x64 with Service Pack 1. Adobe CS6 Master Collection is installed. The computer is joined to a Windows Server 2012 domain and the user of the machine has local administrator rights.
The Adobe suite has been uninstalled and re-installed multiple times without success. Sometimes after re-installing, sending a Dynamic Link to Encore will import as expected once, but then after restarting the computer, the problem will occur again. This has been tried with and without installing any Adobe updates. The system has also been wiped and had Windows and all software clean installed on it again which has not resolved the problem.

More below... may not help, but does say that the programs are not designed to work on a network, and may not
Some? versions of Premiere do not work properly, if at all, over a network
-see messages #1 and #3 in http://forums.adobe.com/thread/771151
-you MUST give all users administrator accounts to use Premiere
-and especially Encore dual layer http://forums.adobe.com/thread/969395
-a work around, of sorts http://forums.adobe.com/thread/957523
-and not on a "domain" http://forums.adobe.com/thread/858977
-http://helpx.adobe.com/premiere-pro/kb/networks-removable-media-dva.html

WMV audio not importing into Premiere Pro CS5.5/CS6

I have two Win7 machines running CS5.5 and CS6 respectively. Prem Pro imports and edits the video sequence of a batch of wmv files recently referred to me for processing but does not show the audio at all. The files play perfectly in Windows media player. I presume there is a codec somewhere on my machines that wmplayer is using but how can I get Prem Pro to use it??? I don't usually use WMV but I have found some other wmv files which import nomally i.e. sound track included. Loading the files into Handbrake lists the audio for the successfully imported files as Source: English (wmav2) (2.0 ch) Codec: AAC (faac) Bitrate: 160. The files that Prem Pro does not import the sound for, list identically except that the source is shown as Unknown rather than English. All other details (wmav2 etc exactly the same.
Thanks

I have two Win7 machines running CS5.5 and CS6 respectively. Prem Pro imports and edits the video sequence of a batch of wmv files recently referred to me for processing but does not show the audio at all. The files play perfectly in Windows media player. I presume there is a codec somewhere on my machines that wmplayer is using but how can I get Prem Pro to use it??? I don't usually use WMV but I have found some other wmv files which import nomally i.e. sound track included. Loading the files into Handbrake lists the audio for the successfully imported files as Source: English (wmav2) (2.0 ch) Codec: AAC (faac) Bitrate: 160. The files that Prem Pro does not import the sound for, list identically except that the source is shown as Unknown rather than English. All other details (wmav2 etc exactly the same.
Thanks

.mts files out of sync audio when importing in Premiere Pro CC

Similar Messages

Maybe you are looking for