MTS not to consider open PR,PO and quality stock

Dear all,
my client wants for MTS scenario system not to consider Stock of RM for  Open Purchase order, Open PR and Quality Stock at the time of MRP run for SFG and FG.
I tried in SPRO settings also in OPJJ( availability check - 02 and checking rule  - PP) remove all tick maintain all stock empty and OPJK ( order type PI01 assign to checking rule PP)  but system consider stock , how to solve this issue.
pls guide me
sakthi

Hi
Goto OPPQ and slect you plant
Click the Available stock
Check the BOX Indicator: stock in transfer available for planning
In OPJJ check the Incl. PR and Incl. PO for your availability check
try this
Thanks
S.Murali

Similar Messages

  • My iphone3g its ben having a lot of problems i it will not lock i open a game and it will go to im  ipod im probly going to get a new one but i would like to know what is rong

    my iphone3 its ben havin g a lot of problems it will not lock i open a game and
    it will go to ipod  im going to get a new one but i would like to know what is rong with it

    Yeah, and it didn't work.
    I had problems when I updated to iOS 5 (lost all my apps - a few of my friends had the same problem) and when there was an update to iOS 4 (camera wouldn't work). The iOS 5 issue was sorted by backup (but I lost the app data) but for the iOS 4 issue I had to return my iPod to get a new one.

  • All pdf say they are the wrong file type or are damaged.  will not allow to open in preview and no pdf's can be printed as they are "empty"

    All PDF's I try to save will save but nobody can open them.  Message is it cannot be opened by reader it is the wrong file type or has been damaged.
    Tried to open with Preview and the message says it is empty, also empty if you try to sea as a PDF in the print option!

    Hi Michelle in MD,
    Thank you for posting on the Adobe Forums, as botht applications cannot open the PDF file, i would suggest you to download it again and try.
    Thanks,
    Vikrantt Singh

  • My laptop will not let me open itunes64 setup and when i try to install it frezzes

    my laptop wont let me install itunes it frezzes halfway and also downloaded on another computer the file and it appears to open to install and then does nothng

    Best route would be to shutdown the computer and restart from cold.
    Make a secure backup of your Songs.
    Uninstall iTunes.
    Install the latest version of iTunes.

  • Since 29.0.1 installed I am not able to open additional tabs and I cannot go to a new sited by entering an address in the address bar (nothing happens).

    Windows Vista

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • My free Adobe subscription is expired. I tried uninstalling the Reader and installing the new free Reader, but my system will not let me open a file and states I need to purchase the Adobe Reader. Any other way to view a PDF file?

    My free Adobe Reader has expired. I tried uninstalling the Reader and installing the new Free Reader trial, but my system still will not open a PDF file and states I need to subscribe to Adobe. Any way around this?

    Thank you.
    On Thu, Jun 26, 2014 at 9:44 AM, Bernd Alheit <[email protected]>

  • Why do my margins get cut off when I right click print, but not when I open my document and print?

    When I right click print (without opening the document) my margins get cut off, but if I actally open my pdf document and click print, it will print just fine.  This only happens when the document has print that is close to the edge.
    I am using Adobe 10.1.2 with Windows 7.
    Thank you in advance for your thoughts and help

    As for your comment on this being my first Mac, and the program issue, you misunderstood. Yes the eMac is in fact my first, personally owned, Mac computer other than the original Apple II series floppy fed PC, in which me and my father owned. The only other Apple/Macintosh computer I had experience on was my father's 13" MacBook Pro, and 20" iMac (both ran OSX Tiger 10.4.11, just as the one I have know runs). The iMac was upgraded to Snow Leopard due to our need for better picture/video/audio editing software such as that of Adobe, and the Macbook Pro was sold because of a business that was started being siphoned out of money. I purchased the eMac from a small business based off of eBay. It had the majority of OSX Tiger software, only missing minor programs like Photobooth. Other than that, it had no wireless software like BlueTooth, Wi-Fi capabilities, wireless sync, ect... But alas, when you buy a Apple/Mac computer, you must take a few cutbacks when purchasing it (even refurb.) for around $120.00 including taxing, shipping, handling, ect... I purchased nearly all of my software from co-workers and friends who had an extra key, or I would receive the software disc from them, and buy a key. The only "illegal" thing I had on the computer was music I had downloaded from LimeWire. I have never, and will never, trust any software coming from a torrent download site.

  • During MRP if system want consider open Pos and Reservation

    As above said if system want to consider open po's and reservation during MRP where configuration setting need to be done please tell me the SPRO path

    HI
    that setting is correct due to the availablity check system checks the PR,PO reseveration and different stocks. just tell you are not satisfied with the answer i understood ur question correctly
    I think what you asked that only i told you can check with other forum members
    regards
    ramakant

  • Not able to open Admin Tool in OBIEE 10.1.3.1 after the installation

    Hi Friends,
    After installing OBIEE (10.1.3.4.1 in Windows) i am not able to open Admin tool,when i click on the Administration it doesnt respond and i dont see any error message either.i have installed 10.1.3.1 several times before and i never faced this type of issue.I re-installed 4- 5 times and overwritten the existing s/w but still see the same issue.I am able to start the services and default RPD is working fine but not able to open the RPD and also i am able to launch the Catalog Manager.
    I searched online but it didn't help me,please share if anyone has faced the similar issue before and found the resolution.

    i tried to launch the Admin tool from OracleBI\server\Bin after the installation but its not responding,seems issue with Admin Tool as i am able to launch other applications.

  • 503 Service Unavailable? unable open irj/portal and NWA for SAP CE 7.3 trial version

    Hi Experts,
    I am not able to open irj/portal and nwa for my recently installed SAP CE 7.3 trail version.
    Only start page is opening.
    SAP J2EE engine and data base is up and runing.
    1.
    Time
    2014 07 03 10:18:04:932
    Severity
    Error
    Filename
    defaultTrace_00.3.trc
    Details
    SourceName: com.sap.engine.services.deploy.server.TransactionManager Location: com.sap.engine.services.deploy.server.TransactionManager DCComponent: servlet_jsp CSNComponent: BC-JAS-WEB User: Guest Session: 0 CorrelationID: 4699250000000003 DSRTransaction: f0452ed0026911e48a26000c29f14d18 DSRRootContextID: F0452ED0026911E48A26000C29F14D18 DSRConnection: f0452ed0026911e48a26000c29f14d18 DSRCounter: 0 ThreadName: Thread[HTTP Worker [@1380566121],5,Dedicated_Application_Thread] TimeZone: +0530
    Text
    Global [startApp] operation of application [sap.com/tc~lm~itsam~co~ui~nwa~localnavigation~wd] failed with errors on server process [4699250].
    Thanks,
    Amith.

    Hi Mayank,
    I am not able to access index.html page it shows 404 error,
    Main page is opening.
    please provide path for dev_server0 and stdout_server0 logs i will update.
    Thanks,
    Amith.

  • Open an objectoutputstream and printwriter on socket

    I have the following code:
    public void openConnection(String ipAddress) throws ConnectException{
    try{
          client = new Socket(ipAddress, 2000);
         out = new PrintWriter(client.getOutputStream(), true);
          objectOut = new ObjectOutputStream(client.getOutputStream());
         in = new ObjectInputStream(client.getInputStream());
         catch(ConnectException e){
         //there is no securityservice on the other side
         throw new ConnectException();}
         catch(Exception e){
                   System.out.println("Error : " +e);
    * Method that sends a list of constraints to the peer service
    * @param: SecurityConstraintList list: the list of constraints that is being sent to the peer
    * @param: String origin: the IP address of the sender, the peer uses this to save the list
    public void sendConstraints(SecurityConstraintList list, String origin){
    try{     out.println(origin);
         out.println("list");
         out.flush();
         objectOut.writeObject(list);
         objectOut.flush();
         in.close();
         objectOut.close();
         out.close();
    catch(Exception e){
         System.out.println("Error : "+e.getMessage());
         }The problem is situated in the part where I first print a line to the printwriter and after an object to the objectoutputstream. On the server i get an exception, being OptionalDataException.
    I don't get what the problem is. The exception is thrown when he reads information that he didn't expected, but i don't see how this is possible? Part of the code on the serverside is:
    else{
         if( inputLine.equals("list") ){
         //it is a securityconstraintlist that is sent
         SecurityConstraintList list;
         list = (SecurityConstraintList)inObject.readObject();
         System.out.println("Saving list");
         AppliedConstraints con = new AppliedConstraints(origin,list);
    FileOutputStream fileOutputStream = new FileOutputStream(listFile);
    ObjectOutputStream objectOut = new ObjectOutputStream(fileOutputStream);     objectOut.writeObject(con);
         objectOut.flush();                    
         objectOut.close();
         fileOutputStream.close();
         }Is it not possible to open an objectoutputstream and printwriter on the same outputstream? If so, is there an (easy) way to work around this?
    Any help would be greatly appreciated.

    Not sure what you mean by this 'reading those line
    terminators' ? Could you clarify?In your code I see a 'out.println("list");' statement. This sends the following character over your socket -- 'l', 'i', 's', 't', '\r', '\n', where the last characters denote a carriage return and a new line character respectively. Suppose the receiving en of the socket happens to be a Mac, where a line terminator is implemented as a single '\r'. This leaves the following '\n' character unread and ready to be read by the ObjectInputStream, which, obviously, doesn't know how to handle primitive data like this (hence the OptionalDataException).
    Like I wrote before -- read those individual bytes and see what really is transmitted over that socket; there must be some spurious bytes in there ...
    kind regards,
    Jos

  • BAPI "BAPI_POSRVAPS_GETLIST2" not extracting Orders with category BC and BD

    Hi,
    I am using a BAPI  "BAPI_POSRVAPS_GETLIST2"  to extract the receipts and requirement elements from live cache, however I found that this BAPI does not extract orders with category BC and BD (Stock transfer reservation).
    Can you kindly let me know whether this is correct ? BC and BD does not fall in receipt or requirement category ?
    If yes then which BAPI should I use to extract orders with BC and BD category ?
    Thanks & Regards,
    Rohit

    Hi Rohit,
      The categories BC & BD are coming under reciepts & requirements only and i guess should be retrived by standard BAPI.
    Please try using BAPI BAPI_POSRVAPS_GETLIST3.
    and also mention correct 'locationproducts' as mentioned in the below thread.
    Purchase order data for ATP category BH and BI not retrieved
    Initially plese try to retrieve the details by 'Order number' to make sure the BAPI is working fine. Later you can do it by locproducts and ATP category.
    Hope it helps.
    Regards,
    Deepthi

  • Hi there, I have much files saved on pages ( ios ipad) , I just open it today and did not find .all the files !!!! Just 4!!! Taken in consider that I did not delete or making any wrong action. How I can return the lost files!!!! Help please

    Hi there, I have much files saved on pages ( ios ipad) , I just open it today and did not find .all the files !!!! Just 4!!! Taken in consider that I did not delete or making any wrong action. How I can return the lost files!!!! Help please
    its very important files!

    tis true
    I know, I always do that but I was in a rush to get somewhere and I was relying on my thousand dollar Mac to do some kind of recovery or something. I know Microsoft always keeps temporary files (I think Mac does too, part of me asking here in this forum was for someone to tell me where I can find those files) and when you go to open Office Works then it gives you the option of opening the last recent documents, saved or not saved.
    I usually copy paste into my emial just in case something goes wrong with the created document but I just didn't have the time to login and do all that My loss, you live and you learn, BUT still if ANYONE got any info on this, PLEASE DO CHIME IN *keeping the hope alive*

  • Multitasking on iPod Touch 4G, running iOS 6.1.2, nearly impossible. Opened,  background apps do not seem to stay in memory and must "reload" every time I switch back to them. Also, intense battery drain (imo).

    Let's say I'm playing Words with Friends, and also Angry Birds. I may want to go back and forth between the two. When I do so, the app that was in the background needs to reload again. There is no quick access or ability to quickly resume where I left off. And the reloading means that the app restarts from its opening screens...so if I was working on a level, I have to start all over again. And quite often, a game like Angry Birds will lag greatly when I first open it...moving almost in slow-motion.
    I don't know if this is typical behavior when playing multiple games, or if I have an issue with my device. I've rebooted and even reset and restored, all to no avail.
    There doesn't appear to be as much of an issue if I'm playing one game but also have the music player open, or Safari, Notes, Reminders, etc. Those will resume just fine, though there may be some lag when opening/re-opening them.
    So I guess the problem seems to lie within 3rd party apps, and not the apps that are part of the iPod/iOS.
    The other problem is battery drain. I do all of my music listening via Bluetooth, so I expect that to have a greater impact than if I were using plugged in headphones, and I have location services turned on. But I have most notifications turned off, all email accounts set to manual and not push, screen brightness turned down and auto brightness turned on, "ask to join networks" turned off, auto-lock is set to 2 minutes but I almost always turn off the screen immediately after setting up my music listening (since I do so at work), volume limit turned on, EQ turned off, sound check turned off,
    With these settings, my battery can drain 20% or more within 10-15 minutes of game play. And these are not what I would consider memory intensive games--just Words and Angry Birds.
    I've installed (and recently uninstalled) a couple of battery meters from the Apple Store as well--freebies. Carat, Battery Doctor, Battery HD, Battery Magic.
    Carat and Battery Doctor seemed to offer the most pertinent and accurate information so the others were uninstalled long ago.
    The Accelerate tab in Battery Doctor show the amount of memory in use, and the amount of available memory. The vast majority of the time, the memory in use is approximately 94%. I will occasionally choose to "accelerate" which supposedly frees up memory, but this "bump" lasts only a brief time and I'm not sure it's a great idea.
    Even with absolutely nothing open or running, my used memory is generally still above 80%.
    Carat, if anyone is familiar with it, shows a J-Score. My J-Score is 17, which means that my performance (according to Carat, anyway) is better than only 17% of the users who have Carat installed. In other words, 83% of people are getting better performance from their devices. It also has "battery hog" and "battery bug" sections. It doesn't detect any hogs or bugs.
    I use my iPod Touch in rather limited ways. A typical day consists of approximately 5 hours of music listening via Bluetooth and 30 minutes to 1 hour of playing the aforementioned games. The occasional note and reminder, perhaps a brief check-in with the weather, and that's about it. And wifi is in use only when at home (there is no hotspot at work). Still, I need to charge it every day. I'd be keen to do more with the iPod if I could count on it to last more than a day.
    I've read up on multiple forums and blogs for tips on prolonging a battery charge, and believe I've taken everything into account, and applied whatever I could. I've even reset the network settings and try to discharge the battery completely once a month (for supposed battery calibration).
    I'm really hoping people can offer some suggestions or comments on whether this is typical behavior or if my battery is going, or even offer some additional tips.
    With iOS 7 on the horizon, I'm hoping the upgrade will offer some resolutions (I've read there is better multitasking), but considering how weakly my device performs at this point, I'm not entirely convinced that an iOS upgrade will actually make any improvements.
    Thanks a lot for reading.

    No, the app does not have to completely restart. It gets shifted in its open state into storage. Similar to how a computer uses the hard disk when it has insufficient memory.
    What complicates things is that sometimes memory does not get returned for reuse when you close an app. Thus yo should periodically double click the Home button and "delete" unnecessary apps from the multitasking dock and power off and then back on the iPod.

  • I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I  have no access ...

    I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I  have no access ...
    HELP HELP

    To confirm, your existing mail client isn't communicating with your existing and remote mail services at Dreamhost? Which mail client are you using (Apple mail?), and how is mail on the client set up?
    It would initially seem that your client is still referencing the server, either for its inbound or outbound mail. (And I'm not sure how unplugging the server helps here, unless there's some sort of a configuration issue, or a duplicate network address or such.) This would usually be something within the configuration of the mail client.
    The Mac OS X Server is significantly easier than the many other servers and server operating systems I've dealt with over the years, but it requires reading the manuals and/or some knowledge of networking and of server environments.
    Small shops and home folks without the time or inclination to "spin up" on these server areas can be well-served with some help initially configuring the server. Servers are different from clients. Stuff that you're implicitly used to using when you're running a client -- the DHCP server, for instance -- are what the servers provide you with.
    As for Mac OS X Server and particularly if you head outside of the default settings and sequences and off into the customizations, which is what has happened here, you might want to engage some assistance. Not just for the direct and obvious initial set-up sequence, but also for getting you set-up and started with backups and other such tasks. Before you get too deep in here and get too much underway and too much saved on your disks, do seriously consider getting somebody in to help set this box up for you.
    Mac OS X Server is not "no IT", but it is rather closer to "less IT" than most. Particularly once you get it configured and running.

Maybe you are looking for