MTS Playback Crashes Premiere Pro CC

Hi Users,
I'm upgraded to the latest version of Premiere Pro CC. Recently, I noticed playback of MTS files crashes my Premiere session. A pop-up appears informing me that the application has experienced an error and must shut down.
Importing MTS files brings no issue. Premiere only acts up when I try to play them.
MTS files have worked in past iterations of Premiere (5.5, 6) so I wonder when this issue appeared.
Thanks!

Hi Emoral7 ,
Thanks for using Adobe Forums;
Please try to follow this:
http://helpx.adobe.com/premiere-pro/kb/audio-video-glitches-avchd.html
Happy Editing,
Sandeep

Similar Messages

Audio Gain Crash - Premiere Pro CC 2014

Working in Premiere Pro CC 2014 I'm experiencing an instant crash when using the Audio Gain function on a clip or any selection of multiple clips in a sequence. The clip(s) in question come from a TASCAM DR-100 audio recorder I've used dozens of times without issue.
ASUS G75
Windows 7, 64-bit
Intel i7-3630qm
16GB RAM
NVIDIA GTX-670MX

I found it strange that this was happening only on two of my sequences (timelines) in the project, while other sequences have no issue with Audio Gain. It's either the sequence, or one-or-more clips—not Premiere, right? First, I ran CCleaner and re-launched Premiere. Clearing system crud with CCleaner seems to have aleviated the problem for *some* of the clips. I could now perform Audio Gain functions on some of the clips.
So my next thought: Clean the Media Cache in Premiere. I tried that next. When I re-launched Premiere and the conform process begain to do it's thing, building new files. When it was done, ALL of my clips could be selected and Audio Gain performed. SUCCESS! The answer to Audio Gain crashing Premiere Pro, in my case, was to clean the media cache.
Interestingly, that's not the end of the story; there's still some funky issue with one single audio clip in this sequence. But since the Audio Gain crash isn't happening anymore, I'll present the new issue in a new thread.

Canon 300 footage crashing Premiere PRO 6 on Mac PRO

As stated above... C300 footage crashes Premiere Pro when using on my Mac Pro. It happens when you scrub through the footage. I have done plenty of searches and everyone with a Mac Pro seems to be having the same problem. The footage also has glitches in the frames when it plays and renders. The only solution I have found is to transcode the footage to something else, which kind of defeats the purpose of using Premiere Pro 6 in the first place. I know this is a problem specific to the Mac Pro because my Macbook Pro does not have this issue when dealing with C300 footage. Does anyone know of any actual solution to this other than transcoding all the footage?
Premiere Pro 6.02
Mac Pro OSX 10.8.2
2 x 2.66 6 core Intel Xeon
32GB Ram
ATI Radeon HD 5870 1024

Hello,
Because you've said you already "re-downloading":
1. Maybe you have to activate/deactivate, so please have a look there:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
2, Sometimes, we know in the meantime, the "opm.db file" is the culprit. In this case you should delete it.
3. Did you already try "uninstalling and re-installing"?
Be careful with (de)installing aso. by (de)installing by your own resources. As much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool.
Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
I quote: Adobe Creative Suite Cleaner Tool helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and follow the prescribed sequence of operations
4.If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences.
Good luck!
Hans-Günter

Imported avi crashes premiere pro cs4...sound only on windows movie maker

Hello all,
So when I go to import an avi it just crashes premiere pro...but first it turns into a sound only file, then crashes. With windows movie maker it only plays the sound?
Anyone else have these problems? I don't really want to use other video editors...
Oh and I'm running Vista.
Suggestions please.

I'm sorry I don't have a quick answer.
From what I can tell
- Vista X64 uses MovieMaker 64bit
- MovieMaker 64bit requires 64bit codecs (I think there is an experimental 64 bit ffdshow on sourceforge that might work)
- However installing 64bit codecs may stop your 32bit video apps from rendering properly.
I didn't provide links to the experimental ffdshow build cause I didn't try it myself.
If I were you, I'd give up on getting Movie Maker working for now, and just focus on Premiere pro. ? Since it is a paid application they should provide good support. You can't be alone with this issue. If they require codec information just tell them it's a H.264 video with PCM Audio in a AVI wrapper. Guess a quick snapshot video could be provided if they needed one.
ps.
. I'm just a user, not affiliated with Creative)
(pss... I use Vista x64 as well, and do not get video in moviemaker either)

Applying Time Code to a Transparent Video Layer Crashes Premiere Pro

Everytime I add timecode to a transparent layer spanning my entire sequence it crashes Premiere Pro. The only work around I've found is to turn that layer into a nested sequence. Not sure why that works and would like to fix the problem.
Thanks
Rick Nichols

What operating system? What version of Premiere Pro? If Premiere Pro CS5, have you installed the Premiere Pro CS5 (5.0.2) update? That update fixes a lot of problems.

'create multi-camera source sequence' crashes premiere pro

Hi,
I use 'create multi-camera source sequence' to sync up 2nd system audio with DSLR footage.
If i select more than say 10 clips to sync with an audio file it will crash premiere pro CC 2014 50% of the time.
Does anyone else find this? is it naturally unstable?
syncing by 'audio mixdown'
I'm on a new Mac Pro 6 core, 16gb RAM, Pegasus 2 RAID.
Cheers

You can see a good tutorial on the entire process here - http://tv.adobe.com/watch/learn-premiere-pro-cc/multicamera-workflows-with-premiere-pro/
The help page also gives step by step - Adobe Premiere Pro Help | Multi-camera editing workflow. I was talking about step 4. Create a multi-camera target sequence.

Exporting to Media Encoder crashes Premiere Pro CC 2014

Greetings,
I am experiencing a problem with premiere off and on. Right now it is an on problem. When I am exporting from Premiere Pro CC (and CC 2014) it will intermittently crash Premiere. I have tried this with several different audio and video formats (AVI [Lagarith and uncompressed], WAV, H.264, MPG2, AAC, etc). At the moment, every time I go to export to queue it locks up and hangs on the "Preparing data for export..." Media Encoder Launches and then it just freezes. I get "Problem Even Name: AppHangB1" over and over. Sometimes a full restart will fix this temporarily and sometimes it goes away for a long while. I managed to get a few sequences exported and then it just kept freezing on every PP CC restart.
Here are my system specs:
Premiere Pro CC (up to date)
Win 7 64bit (up to date)
i7 970
24GB Ram
NVIDIA 470GTX (driver up to date)
3 x 1.5TB internal
4TB internal
3TB internal
12TB RAID 5 via USB 3.0
USB 2.0 and 3.0 drives
FireWire audio device (M-AUDIO FireWire1814)... although, I am not using it for playback. It is connected.
Footage is from C100 H.264 .MTS, H.264.mov from 7D, and H.264 .MOV from iPhone.
All stock video plugins with a few third party audio plugs.
This problem happens with and without third party plugs, but it happens that this project uses them.
I have chatted with Adobe help twice about the matter and nothing has come of it. Log out, log in = same. Restart = same (sometimes), create new user account = same, and so on. The only thing I haven't done is completely re-install premiere, which seems a bit overkill. One of the reps said he would get back to me in a few days after he watched the issue via screen share. Never heard back.
I get the sense that this has something to do with PProHeadless.exe not launching or not running properly. When the crash happens on a fresh restart of PP CC 2014 PProHeadless is not running. I can start PProHeadless and it will send sequence to media encoder. When I try to export another sequence from the same project it crashes and I see another instance of PProHeadless launched.
Also, once the projects are exported to Media Encoder, I can encode them to any format with no problem. The problem is getting the sequences there!
Is there anything that I am overlooking here?
Thanks for the help!

Hi
Premiere pro cc 2014 8.0.1 (21) build
Encoder CC 2014 8.0.1.48
I use CC for Teams so it updates all the time.
Again when I tried to use it today by letting premiere open it by sending an output into Queue it crashed both Encoder and Premiere.
In order to shut down Encoder and Premiere I had to go into Task Manager and "End Process Tree" on everything adobe I could find because just ending Encoder did not work it would not close. I remembered that years ago when Premiere would crash we had to end a photoshop process. I found photoshop open even though it was not "alive" on my task bar. I had used it yesterday but had closed it. I also had to close dynamiclinkmanager.exe *32 as well as one of the three Adobe CDF Helper.exe*32. They popped back on but Encode closed and then I got a message that Premiere needed to close and did when I clicked the button to let it close.
After all this I re-opened Encoder by itself and checked the Preferences finding that Import Sequences Natively option was again checked.
By the way for me, "Launch AME manually, then drag the sequence from PPro's Project panel to AME's Queue (or to a preset in the Preset Browser). That uses a different code path than the File>Export>Media workflow." won't work most of the time because I do live events of panel interviews that may run 2 or more hours. I need to break them down to chapters for the web
Also I know this isn't part of this problem but I and many others would still love dynamiclink to work to Encore because the DVD is not dead yet. The current work path is a drag.
Looks like some programers and engineers have some work to do.
Thanks
Dennis
My computer:
Self built PC windows 7 Professional 64 bit Build 7601 SP 1 I use auto update so it is up to date.
ASUS P6x58D Premium Motherboard
Intel (R) Core i7 930 @ 2.80 Ghz
Installed Memory 12 GB
NVIDIA GeForce 9500 GT
NVIDIA GeForce GTX 580
2 Apple Monitors and a HP full HD Monitor
With a BlackMagic Intensity Pro Capture Card

Warp Stabilizer Constantly Crashing Premiere Pro CC 2014

I have never had an issue applying warp stabilizer to clips, now it constantly crashes my system during the analyze phase. Does not seem to be an issue with any other effects. Have the most current version of premiere CC 2014. Running Windows 8.1 Plenty of memory, etc. Has never been an issue, now it happens every time! Help!!

I am having similar issue - without the crashing. Any clips I use warp stabilizer on do not retain their render after I close the project.
What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update). v8.0.1 (21) build 2014.0.1 release
Have you installed the recent updates? (If not, you should. They fix a lot of problems.) Cloud says i'm up to date
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac". Windows 8.1
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime". mp4 from a gopro
If you are getting error message(s), what is the full text of the error message(s)? no error
What were you doing when the problem occurred?
Has this ever worked before? no
What other software are you running? Chrome
Do you have any third-party effects or codecs installed? No
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU). Dell latitude e7440 8gb ram, ssd
Are you using Mercury Playback Engine GPU Acceleration? i dont think so
Does the problem only happen with your final output, with previews, or both? clips do not stay rendered in timeline after saving/close a project and reopen

Why Do I get Choppy Playback in Premiere Pro CS6

Before upgrading from CS5.5 to CS6 I wiped my computer and started from scratch. When editing 4 angles in CS5.5 I never had any problems with playback... even after adding titles, effects..
In CS6 I have my 4 files set into a multicam sequence but when I play back and start cutting from cam to cam it gets choppy.
I am running:
Windows 7 64bit
On a Dell Studio XPS 9100
Intel Core i7 930 @ 2.80GHz
12.0 GB Ram
ATI Radeon HD 5800
I have my memory preferences in PR set to 12 GB Installed, Ram for other aps = 3 Ram fpr PR 9GB, and it set to performance
Any help to speed up and render this proper would be great, Still have to add color correction, titles, logo.

The 1st update came out today. Downloading now. Looks like it should fix my old problems... fingers crossed
What's new in Adobe Premiere Pro CS6 6.0.1:
May 26th, 2012
Features added or changed in this update:
· Improved performance using OpenCL, especially when used on Mac OSX v10.7.4 or later.
· Added encoding presets with additional bit-rate settings for XDCAM HD.
· Added Automatic Peak File Generation preference in the Audio category for turning off automatic peak file generation for imported audio. By default, this preference is enabled and matches the behavior of Premiere Pro CS6 (6.0.0).
· When this preference is disabled, importing audio or opening projects will not cause peak files to be generated. If peak files were already generated, then waveforms will be visible. Files imported before the preference was disabled will continue to generate peak files.
· Enabled “smart rendering” and added Enable Smart Rendering Codec setting to the Video tab of the MXF OP1a exporters for XDCAM HD and XDCAM EX to enable or disable smart rendering for these formats. This option defaults to the off/disabled state. We’ll have more information about this feature in a post on this blog within a day.
Bugs fixed in this update:
· Start timecode was not imported or exported correctly when working with AAF files.
· Some files from the Canon 5D Mark III camera were imported with the wrong timecode.
· Playing/viewing waveforms in the Source Monitor caused audio dropouts with some XDCAM HD clips.
· NTSC MXF OP1a files that were exported with drop-frame timecode had video data that was tagged as non-drop-frame.
· Switching the Renderer project setting from Mercury Playback Engine Software Only to Mercury Playback Acceleration GPU Acceleration on a computer using OpenCL caused Premiere Pro to crash under some circumstances. Switching between the two settings on a computer using CUDA would in some cases cause problems with video and/or audio playback.
· Crash when using full-screen, cinema mode on some computer systems.
· Tape capture was not working correctly with some third-party systems.
· Crash when capturing from tape using some BlackMagic hardware.
· An extra, black frame was included at the end of the output when exporting to P2 MXF in some circumstances.
· First two frames were being played twice on external monitor using Matrox MXO2.
· Crash when using “hover scrub” with Matrox MXO2.
· Audio/video synchronization was off by a few frames when playing video on external monitor.
· The Export Frame button was not exporting the correct frame, instead exporting a frame one or two frames away from the current frame.
· Some audio files and some MXF files would go offline or have their audio reconformed when the project was re-opened or when Premiere Pro was minimized or lost focus.
· Crash when modifying an effect property while playback was occurring.
· Hang/freeze when using a dissolve transition on an adjustment layer.
· Dropped frames and audio/video synchronization issues when exporting to tape using some third-party hardware.
· Information about dropped frames on output to tape was not accessible to third-party systems.
· Some QuickTime files were imported with the wrong field order.
· When audio was sent through a Mercury Transmit plug-in, any number of channels that was not 2 or 6 was treated as mono.
· In HDV editing mode, File > Export > Tape could not be used with third-party hardware.
· The current-time indicator (playhead) was not returning to the current time after using the Play Around command.
· Last several frames of output when exporting to tape were black.
· When encoding a 23.976 fps video to H.264, the duration of the video in the output .m4v file was too short, and audio drifted out of synchronization with the video.
· Transparency (alpha channel) information from a dynamically linked After Effects composition was rendered incorrectly in Premiere Pro.
· Importing some QuickTime OP1a files caused Premiere Pro to hang.
· The duration of the audio track sent to SpeedGrade using the Send To SpeedGrade command was the length of the entire Premiere Pro sequence, not the length of the work area.
· Timecode written to trimmed clips using the Project Manager did not match the source timecode for some QuickTime files.
· Various other crashes.

GTX 660Ti crashes premiere pro at random times.

We got this macpro for our company and it came with 2 x 2.8ghz quad core, 16gb Ram DDR2 FB-DIMM and an Nvidia GTX 660 Ti.
At first it ran fine but i coudn't activate the gpu rendering in PPRO and AE (both CS6 and CC now).
So i looked online and added the card to my terminal list as everyone must have done with their own cards so that Adobe can recognize it.
It started fine and GPU rendering worked but after a while both my monitors would crash and show purple rectangles all acrross the screens, as if the graphic failed (see picture attached) and I could not do anything but restart the machine and sometimes loose work I'd be doing. It never happens if PPRO and AE are closed but once I work on adobe softwares, there is no guessing when the crash will take place, it happens when you least expect it, especially before I saved anyhting. GRRRR
So for a while I took out the card from my terminal list (both from AE and PPRO) and it worked just fine even though I could not use the GPU rendering which tends to be annoying, especially with the amount of work we deal with.
I saw in a few forums that some people managed to get their GTX660Ti to perfectly without flaws.
Therefore I am writing this dicussion to ask if annoying had this issue?
Is it because i'm stuck on DDR2 ram cards? and i cannot update this card to work in AE AND PPRO
I have the latest cuda driver 5.5.47; im on OSX 10.8.1 and I will upgrade to Mavericks very soon but I need to know if there is way to fix this issue....
Any help or guideline will be greatly appreciated.
Thanks
Machine Specs
2 x 2,8 GHz Quad-Core Intel Xeon
16 GB Ram 800 MHz DDR2 FB-DIMM
NVIDIA GeForce GTX 660 Ti 2048 MB
OS X 10.8.1 (12B19)
Cuda Driver 5.5.47
Dual Monitors via DVI link on 1080P
Adobe Creative Cloud member

Hi,
Please try installing CUDA package from the below link and then try to change the Renderer in Project settings>General to Mercry Playback Engine GPU acceleration CUDA. This card is not in the supported list of card for Premiere Pro and After Effects CS6 so this suggestion will work only for CC. If you have any further issue try downgrading the CUDA drivers to 5.5.28 and check if it works for you or not. Please restart the machine once you have downloaded and installed CUDA package.
http://developer.download.nvidia.com/compute/cuda/5_5/rel/installers/cuda_5.5.20_mac_64.pk g
Regards,
Vinay

ICanon C100 playback issue premiere pro cc 2014

I am having playback issues in Premiere Pro CC 2014 with footage shot on my Canon C100 (29.97 fps). It was happening after doing a straight import and creating a sequence using "new item". Then, after reading some other threads here and elsewhere, I interpreted the footage so premiere would see it as progressive (no fields) rather than interlaced, but that doe not seem to help. It is even doing it when I play at 1/4 resolution. The only solution seems to be to quit and restart and reopen the project. Then it works temporarily for a little while but not long enough to actually edit. I have done projects in Premiere with C100 footage in the past and have not experience this level of difficulty.
My Media Cache is not going to the startup diskc(it is gong to the right place)
I am on a Mac 2.66 Ghz Quad-Core Intel Xeon
OS X 10.8.5
10GB 1066 MHz DDR3
NVIDIA GeForce GT 120 512 MB
Please help - very frustrated. If the solution is to transcode, it sort of kills the value of premiere in many ways.

Hi,
This might help :
Go to File > Project Settings > General and change the Video Renderer to Mercury Playback Engine software only. Click OK and select Delete Previews.
Thanks,
Rameez

Slowing speed causing jerks during Playback in premiere pro 1.5. Can anyone give advice to solve?

Hello.
I am from Pakistan and we use PAL.
I am using adobe premiere pro 1.5 at my P.C. No capturing card has been installed on my computer. When I strech any video clip or slow its speed, after render, it produces little bit jerks and flickers during playback. Even it shows same problem after export project. Can anyone tell me the solution. Another thing I want to share, I have installed Matrox RTX card at my office. I have not seen any jerk there during slow motion. (Sorry for using inappropriate english)

Welcome to the forum.
Unfortunately, you have posted to the CS5 sub-forum, and should post to the CS4 and Earlier Forum. I am sure that one of our MOD's will move this for you, especially as you were kind enough to put the version number in the title - thank you for that.
Now, can you give us the full specs. of your Video files. The more detail, the better. There is likely some aspect of those Source Files, that is causing an issue.
Good luck, and if this post "disappears," then it has been moved for you. See the link above to the CS4 and Earlier forum.
Hunt

HELP! Jerky playback on Premiere Pro 6.0.2 CS6 and Retina MBP (16GB)

Dear all!
Please help me to solve this problem!
It's going on Premiere Pro 6.0.2 CS6 and Retina MBP with 16GB RAM installed.
CUDA Driver Version: 5.0.24
MacBook Pro Retina, Mid 2012
Processor 2,7 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 1024 MB
Software OS X 10.8.1 (12B19)
Adobe Premiere Pro CS6 (6.0.2. - 072)
While playing back inside PP a jerky playback occurs, every 1-2 seconds it rewinds to 2-3 frames back and continues to play forth...
No special console messages or something similar visible.
Have tried to clean the cache but it doesn't help. Also have tried to switch the mode between CUDA, OpenCL and SW - without any visible changes...
Exhausted... Please HELP!!!!

avrbox, I had the same problem and went crazy because I didn't find a proper solution. I use Windows, though. Finally, I got to fix the problem. I use a i5 processor, which I overclocked with an asrock tool that came with the mainboard (to about 3350 MHZ where the system ran stable). When I turned overclocking off, Premiere played back the clips just fine. I overclocked then step by step until the playback went jerky again and kept that frequency. Maybe your processor is overclocked by stock or you did it manually?
Hope this is your solution!

Flickering during playback in Premiere Pro (CS6)

Hello everyone.. I work in the IT department, and I am trying to assist a user with a problem they are having with Premiere Pro. Let me preface this by saying I know nothing about how to use Premiere.. I am not the user, I just install it and make sure it's there.
The problem they are having is that when they click the button to watch playback, the screens (dual display) flicker/flash/strobe, whatever you'd like to call it. As soon as you click 'stop', it stops.
I've already tried re-installing Premiere, but I might need to just completely uninstall the entire CS6 suite and reinstall it.
Here are the specs: (I don't know why the images are blurry, but you can click on them to open them and they are clear)
And the video card info:
I've already been to AMD's website, and it says I have the current video driver. Windows is also completely up to date.
This system has dual monitors.
Thank you in advance!

Only one drive is a problem (see below) but... more information is still needed
Is CS6 updated to the 6.0.2 version?
What kind of video is being edited? (see below)
Is there a red line over the timeline when the video is 1st imported and before any work is done?
-if yes, that means the project sequence is not correct
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything

Mts-file in premiere pro cs6

I inport a videofile .MTS in premiere pro cs6 but the audio are not there only the picture. What shal I do?

1st, Read Bill Hunt on Audio Conforming http://forums.adobe.com/thread/726693
2nd, read Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
-and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html
-http://helpx.adobe.com/premiere-pro/using/importing-assets-tapeless-formats.html

MTS Playback Crashes Premiere Pro CC

Similar Messages

Maybe you are looking for