MTTR and MTBR Reports

Dear SAPIENTS,
Can anybody let me know about this report generation settings?
What settings are required to get this report?
Regards,
Kaushal Rai

hi
you haven't replied to my queries,ie have you run the breakdown statistics using T code MCI7.
Also kindly refer [Plant Maintenance Information System |http://help.sap.com/saphelp_46c/helpdata/en/8c/fd586fa94711d1890a0000e8322f70/content.htm]
Path for OMOS IMG>Logistics - General>Logistics Information System (LIS)>Logistics Data Warehouse>Updating>Updating Control>Activate Update
regards
thyagarajan

Similar Messages

  • MTTR and MTBR (Breakdown analysis report mci7) in PM.

    Hi all,
    this is regarding pm issue.
    in mci7(ie MTTR and MTBR report) iam unable to get the required results for certain equipments.
    ie it is showing very high values.
    please guide me in this regard.
    Regards,
    santosh.

    Dear Maheswaran,
    as per your post iam sending the following information.
    1. What is the start up date?
    Start up date for Equipment 1&2 :  1-4-2006
    Start up date for Equipment 3      :  30-11-2004
    2 Go to IW29, give the input for Breakdown notification type & get the list of notifications. From that, give the number of notifications created, breakdown duration for each notification (Check for Breakdown check box in those notifications & give that particular number)
    In IW29 i found following
    NOCO Status 6 nos
    OSNO status 1 no
    NOPR status 6 nos
    Breakdown duration is as follows
    NOCO--1.42h
    NOCO--0.13h
    NOCO-- 1h
    NOPR-- 2h
    NOCO-- 0.81h
    NOPR--  0.82h
    NOCO-- 0.87h
    NOCO-- 1.05h
    3) in mci7 i used to give date as 09.2010 to 07.2011
    4) in mci7 i used to give date and equipment no as input.
    pleae guide me in this regard.
    Regards,
    santosh.

  • MTTR and MTBR Calulation

    Hi
    Can Anyone Explain me how MTTR and MTBR is calculated for following cases.
    1.What will be the MTTR and MTBR for the Equipment which is breakdown for the first time.
    2 And How to calculate MTTR and MTBR for equipment which got breakdown for more the one time,
    3. what are all the thing taken in consideration for calculating the MTTR and MTBR.
    4. Can we convert the MTTR and MTBR reports in days which is currently in hours in system.

    Hi Sandeep,
    Let's first understand the concept.
    Suppose an Equipment started operations and worked for 1 year. Suppose this equipment underwent Breakdown for 5 times in this period. like this
    1st  for 10 hrs
    2nd for 3hrs
    3rd  for 8hrs
    4th for  20hrs
    5th for 17hrs
    MTTR = (10 + 12 + 8 + 20 + 5) / 5    = 11Hrs
    MTTR is nothing but the average Repair period.
    Now what is MTBR?
    Think about the intervals between these Breakdowns.
    Interval between 1st and 2nd Breakdown -  80 days (1920 hrs.)
                             2nd and 3rd    --               30days (720 hrs)     
                             3rd and 4th     --              180 days (4320 hrs)
                             4th and 5th     --                20 days (480 hrs)
    MTBR =  ( 1920 + 720 + 180 + 20 ) / 4   =  3720 hrs
    Now let's come to you queries
    1. Obviously MTTR for the 1st breakdown will be equal to the Downtime of the first breakdown.
        MTBR not applicable because there is only one breakdown.
       Even MTTR is nor applicable for this very reason.
    2 & 3  I think these have been answered in detail.
    For Calculations of MTBR, the Startup date in Equipment Master is taken as reference date. If this field is blank, then the Malfunction Start Date of your 1st Breakdown Notification will be taken as reference date.
    4. For this you need to go for a simple development.
    Jogeswara Rao K

  • No MTTR and MTBR in Table S070 for Query

    Dear All,
    I tried to create a Query using Table S070 to modify the Breakdown report a little.But i am unable to find the MTTR and MTBR fields as below in the Query for to select in the list.So How to get those fields or Which table i have to use for to obtain those fields??
    Regards
    M.Manojkumar

    You are getting the total  TTR and TBR values from the S070 LIS. When you divide these figures by the number of breakdowns (field SMSAUS) of then the result is MTTR and MTBR
    For formulae see this picture:
    Here One failure  is one Downtime. Add all these downtimes and divided by no. of downtimes for MTTR.
    And Operating Time (between failures) is the Uptime. Add all Uptimes and divide by no. of Uptimes for MTBR.
    Jogeswara Rao K

  • MTTR and MTBR

    CAN ANY ONE TELL ME HOW TO CALCULATE MTBR
    my update status is 26,
    start up date of equip= 01.08.2011
    1st  break d d = 10.08.2011
    break hours = 10 hours
    2nd break d d= 20.08.2011
    breakd hours = 5 hours
    when i execute ME17 result is MTTR=7.5, MTBR =229
    problem is that 229 this is a value of system but when i manually calculate the MTBR result is completely different
    PLEASE TELL ME IN BRIEF HOW I CALCULATE SO THAT I CAN GET RIGHT VALUE MANUALLY (BY MY HAND)

    MTTR and MTBR
    MTTR= Mean time to repair
    MTBR= Mean time between repair
    Example = Compressor
    Start-up date of compressor = 01.08.2011
    1st Breakdown = 10.08.2011
    Break down Duration = 10 hours
    Time =   08:00:00 to 18:00:00
    2nd Breakdown = 20.08.2011 
    Breakdown Duration = 5 hours
    Time = 12:00:00 to 17:00:00
    MTTR=   sum of total breakdown hours                                                                                .                   Total no. of breakdowns      
    MTTR = (10+5)/2 = 7.5
    MTBR = (Total Running Hours Till Last Breakdown - (N-1) Breakdown duration) / N                                                .                             .                                                                                (N means total no. of  Break down) 
    Total Running Hours = (Notification Start date - Equipment Start date)*24
                                                                                +
                                                (Remaining hours till last breakdown not start)
    VERY Important: in this example the last breakdown is on 20.08.2011 and breakdown start at 12:00:00 ou2019clock at noon time, I mean to say the hours between the 00:00:00 to 12:00:00,  before  breakdown start is 12 hours . this 12 hours or hours before the breakdown start , many people forget to add this in Total Running Hours.
    Total Running Hours = (20.08.2011 - 01.08.2011)*24 + 12 hours (hours between the 00:00:00 to 12:00:00, before breakdown start)
                                         = (20-01)*24 + 12
                                         = (19*24) + 12
                                         = 468 hours
    MTBR =   468 - 10  ( N-1 means leave last breakdown, sum of duration of all remains breakdown) / 2                               .                    
    MTBR = 229 hours
    Pankaj Yadav

  • Plant Maintenance Business Content - MTTR and MTBR

    Greetings to all,
    Was wondering whether anyone has any idea which standard (international?) SAP is following, when developing formulas to calculate MTBR (Mean Time Between Repair) and MTTR (Mean Time To Repair) in the Plant Maintenance Business Contents.
    It will be great help, if there is an indication on this!
    Thks!

    Hi,
    Yes, I have seen those notes. But was wondering whether there's a specific international standard that was followed.
    Thks!
    Rgds

  • MTTR MTBR Report on Assembly Level

    Dear All
    Standard MCJB report give the MTTR and MTBR report on Equipment Level. we need it on Assembly level. for that we did changes on LIS. we create the new Info Structure by coping S070 and added Assembly.
    with this Assembly is now coming in the report but the Time is not getting Update. Please help me on this..
    Regards
    Ankit..

    Hello
    First You need to create the notification for assemblies then you can see the MTTR & MTBR Time in report.
    Can you explain that ,your creating any Notification for Assemblies if so please check the weather that notification in Completed status
    Regards,
    Rakesh
    Edited by: RAKESH ASHOK MANE on Jul 29, 2010 4:39 PM

  • MTTR/MTBR report......

    Dear All,
    As per my knowledge we have mttr/mtbr reports straightway available in system, but they calculate from the start date till current time..............accumulative.
    But if i want some month wise comparison, or monthly MTTR/MTBR reports,,,,,,,,and others like COST Comparison,,,do we have available in SAP??
    PLz guide
    rgrd
    DM

    Dear
    For SAP std Report u have the look at MCI1 to MCI 8. If you need any specific dates not from Period wise , Better u can create ABAP report.
    The Breakdwon, Costing (MaterialactivityServices), Planner Grps, Actions (agst Brk down) in one report.
    Make mandatoty fields for Planr Grp, Wrk center, Cause, Damage at Notification , order.
    U can go for own according to the client requiremnet. I think u got some points from all submited earlier post also.
    If any ?
    Thenna

  • MTTR/MTBR report..........Equipment

    Dear All,
    As per my knowledge MTTR/MTBR reports are calculated on the basis of START UP that we maintain in equipment master...and VALID from date have NO ROLE in this report.?? AM i rite ? One more thing there is one field 'TIME BETWN REPAIR" wat does it show, can anyone help?
    rgrds
    DM

    Hi deepak
    As you said for calculating the MTTR/MTBF the start up date will be taken up by the system,whereas if you not specified the start up date then the date of first malfunction end will be considered.
    you can also specify what is the MTTR/MTBF for the time period ie for last year by specifying the valid from date
    Time between repair is tme actauly take to get back the system in to operation, whereas Mean time is the average calculated based on time taken and breakdown entered
    regards
    thyagarajan

  • MTTR/MTBR REPORT---SAP PM

    Dear All,
    I created one Malfunction Notification on equipment for down time.But not able to see the MTTR/MTBR report for that equipment.
    Please suggest.
    Regards
    Vishal

    And pls can anyone say, what is the settings for MTTR AND MTBF in a sap pm.
    kindly share the details to [email protected]
    kindly help me to know the settings in implementation phase....
    siva

  • MTTR/MTBR Report in PM

    Dear Guru's,
       My client has a query that why SAP not Provides MTTR/MTBR report for functional location when an equipment is breakdown corresponding functional location is also breakdown but the system consider only the equipment, not consider the functional location that is linked to the equipment.
    Regards,

    Hello Mr Subrahmanyam,
                                            When you are saying that the Equipment is in Breakdown, it may happen that the whols FLock could be considered in Break down, but not necessary,
    say we take an Example of a Work Shop, where Mechanical Workshop is the Functional Location and it has N no of Equipments like Lath, Grinding m/c, Welding M/c, Shaper Etc.... in this case can you please tell me if only one of the above mentioned Equipment is under Break down can the Whole Mechanical Workshop be termed as under Shut down.
    What you are saying is correct in the Line Production, where we can have the Predessing as well as the Succeding Equipments, there for the Critical Equipment you generally have a Back-up Equipment, may be possible the capacity of the Backup might not be same as the mail Equipment, but still it can serve the Purpose for the Time Being. in that condition how can you say that the whole FLock is in Breakdown.
    Hope I am able to clarify.
    Regards,
    Yawar Khan

  • Sorting in 6i and 10g reports

    Hello All,
    I am running 6i and 10g reports against a 10g database.
    I ran one of the 6i report and it generated a report in one sorting ordear
    and when i ran the same report on 10g ,it generated the report in ddifferent order.
    Both the reports r run against the same 10g database.
    The order by clause on the columns of the records r identical.
    Now i wanted to understand how it is sorting in different orders in both 6i and 10g reports?
    Thanks,
    Ranz

    Hi,
    Please note the fact that 6i Reports is not certified to work with 10g Database. Hence it becomes impossible to address the sorting behavior of 6i Reports, though there is nothing different in the way it works. I would suggest you to use 10gR2 version of Reports services with 10g Database which is certified and supported. Thanks for your understanding.
    Regards,
    Anand

  • Crystal report(Can i link sub report and main report Compulsorily) - invalid path

    hi.
    i need small clarification.
    i am developing one Crystal report
    main report i took it from rdr1 one table...
    report is working fine..
    Sub report i took it from inv1 one table.
    i have not linked any fields from these tables.
    May be it is having links in b1..
    but in my other report both the tables.... from main report  and sub report does not have any relation.
    My Questions is..
    Can i Compulsorily link fields to main report...
    if both does not have any relation what should i do...
    i took two tables.
    main report rdr1
    sub report inv1...
    if i  run the report it is asking two parameters one is for sub report and other one for main report working find in crystal report.
    but...i want to run the report in b1.
    while importing i am getting the error (Plz have a look on below image)
    if i choose any other report it is importing  fine...
    Clearly i am mentioning i dont want to link both tables there is no links between two reports...
    in this scenario can develop  a report..
    I need your Valuable suggestions.
    here below u can find my developed sample report...
    http://www.megafileupload.com/en/file/544758/NewReport-rpt.html

    hi.
    If i try only i am getting the error..
    out side if i run i am able to run the crystal report but
    in b1 i am not able to import the report.
    you can also try my report
    from below link u can get my simple report.
    if u find any mistake what i have done plz inform me..
    http://megafileupload.com/en/file/544806/NewReport85-rpt.html

  • I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

    Question
    I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
    '''(in English)'''

    Hi Danny,
    Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
    but not 180, right?
    I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
    =COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
    or
    =SUM(IIF(Fields!TICKET_STATUS=4,1,0))
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Error while running historical and operational reports in OIM 9.1

    Hi all,
    I had a look at the operational reports and historical reports in OIM 9.1
    When I tried to run the reports by supplying the parameters, I see the following behaviors.
    a)The reports run as expected and display the information.
    b)The moment, I click submit I see a series of exceptions in the Jboss log, the beginning of the thread being....
    WARN [TxConnectionManager] Connection error occured: org.jboss.resource.connectionmanager.TxConnectionManager$TxConnectionEventListener@1e7aa15[state=NORMAL mc=org.jboss.resource.adapter.jdbc.xa.XAManagedConnection@6fc757 handles=1 lastUse=1300177838234 permit=true trackByTx=true mcp=org.jboss.resource.connectionmanager.JBossManagedConnectionPool$OnePool@62b4a1 context=org.jboss.resource.connectionmanager.InternalManagedConnectionPool@40ba54 xaResource=org.jboss.resource.adapter.jdbc.xa.XAManagedConnection@6fc757 txSync=null]
    java.sql.SQLException: No more data to read from socket
    c)The screen just hangs without any error message/report results. When I tried to click any other menu items on the left hand side, none of them responds after the screen is hung.
    The only option available is to close the window and reopen the browser again.
    It would be great if you could let me know the root cause for scenarios 'b' and 'c'
    Looking forward to hearing from you,
    Many thanks in advance

    Hey guys! 2 days and no replies yet. please help me with this.

Maybe you are looking for