MTU and latency requirements

I'm trying to find the required MTU and latency for Business One when used remotely via WTS. Please help.

Hi,
What you mean by MTU?
Thanks & Regards,
Nagarajan

Similar Messages

Advice required on optimal MTU and MSS settings for GRE and IPSEC connections

Hi,
We have 2 remote sites (Site A and Site B) which connect to our datacentres (DC) over IPSEC VPN and connect to each other over GRE tunnels.
We had some issues recently which we believe were MTU/MSS related (browsing web servers at one location not appearing correctly etc)
We got some advice from our Cisco partner and tweaked some settings but I'm still not convinced we have the optimal configuration - and we still have some problems I suspect may be MTU related. For example, from our DC (connected to Site A by IPSEC), we CANNOT browse to the webpage of the phone system hosted at Site A. Yet, we CAN browse to the webpage of the Site A phone system from Site B (connected over GRE)
Site A and Site B have two WAN internet circuits each - and each provider presents their circuit to us as ethernet.
Here are the relevant interface settings showing the currently configured MTU and MSS (both routers are configured the same way)
Can someone advise on what the optimal settings should be for our MTU and MSS values on the various interfaces or how we might best determine the values?
interface Tunnel1
description *** GRE Tunnel 1 to SiteB***
ip address [removed]
ip mtu 1400
ip tcp adjust-mss 1360
keepalive 30 3
tunnel source [removed]
tunnel destination [removed]
interface Tunnel2
description *** GRE Tunnel2 to SiteB***
ip address [removed]
ip mtu 1400
ip tcp adjust-mss 1360
keepalive 30 3
tunnel source [removed]
tunnel destination [removed]
interface GigabitEthernet0/0
description "WAN Connection to Provider1"
ip address [removed]
ip access-group firewall in
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip nat outside
ip inspect cbac out
ip virtual-reassembly in
crypto map cryptomap
interface GigabitEthernet0/1
description "Connection to LAN"
no ip address
ip flow ingress
ip flow egress
duplex auto
speed auto
interface GigabitEthernet0/1.1
description DATA VLAN
encapsulation dot1Q 20
ip address [removed]
ip access-group 100 in
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1320
interface GigabitEthernet0/1.2
description VOICE VLAN
encapsulation dot1Q 25
ip address [removed]
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1320
interface GigabitEthernet0/2
description "Connection to Provider2"
ip address [removed]
ip access-group firewall in
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1492
ip nat outside
ip inspect cbac out
ip virtual-reassembly in
duplex auto
speed auto
crypto map grecrypto
Thanks.

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
http://www.cisco.com/c/en/us/support/docs/ip/generic-routing-encapsulation-gre/25885-pmtud-ipfrag.html

My laptop had to be reimaged and all software and programs were taken off. I installed itunes again but can't access my library. I get an error message "the folder itunes cannot be found or created and is required. The default location for this folder

I can't access my itunes music on my laptop after having it re-imaged. I installed itunes again but can't access the music folder. I get the following message when I click to open itunes: "The folder itunes cannot be found or created, and is required. The default location for this folder is the Music folder.
I have an iPad2, and iPad mini, and an iPhone5 with a different number of songs on each. I want to sync everything -- should have close to 800 songs. Tried to get support from Apple but would be charged for help.

I have a Windows 7 operating system my computer runs from.

The folder "iTunes" cannot be found or created, and is required.

Hello,
I cannot start iTunes. When I do, I get the following error message:
The folder "iTunes" cannot be found or created, and is required. the default location for this folder is inside the "My Music" folder.
I have reviewed and gone through the recommendations for this problem, including downloading the WindowsPowerToys Tweak UI. The problem is that the Tweak UI does not know that there is a My Music special folder, so Tweak UI was of no use.
Can someone tell me what I need to do to make my Dell (Dell doesn't know either) understand that I have "My Music" folder on my computer....so it can be seen in my Tweak UI application.
Thank you.
Tim

I have followed these instructions:
If the My Music folder is in the wrong location or incorrectly assigned in the Windows registry, you may see one of the following error messages:
* "The folder iTunes is on a locked disk or you do not have write permissions for this folder."
* "The folder iTunes cannot be found or created and is required. The default location for this folder is inside the Music folder."
If you see one of the above errors, follow these steps to troubleshoot this:
1. Verify the location of your Windows XP My Music folder. The default location for this folder is
C:\Documents and Settings\username\My Documents\My Music
If you do not have this folder at the default location and have not moved it to another location, consider creating one inside your My Documents folder.
2. Download and install Tweak UI from the Microsoft PowerToys website at http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx Note: This utility is for Windows XP only. Please review the system requirements before installing.
3. Once you have installed Tweak UI, open it from the Start menu.
4. In the column on the left, click on the plus symbol next to My Computer and select Special Folders.
5. In the right pane on the Folderlist, click My Music.
* This is where I run into the problem. My Music does not show up in the *
* right pane pull down set of options. *
6. Click the Change Location button. You may see a warning message appear with precautions for changing this setting; after reviewing the message, click Yes.
7. In the resulting window, browse for the My Music folder as described in step 1, and click OK.
8. Reinstall or open iTunes.

Error message The folder Itunes cannot be found or created and is required"

Help please. I get the message "The folder Itunes cannot be found or created and is required. The default location for this folder is inside the My Music folder". As a result, I cannot get Itunes to load. Have uninstalled and reloaded, repaired etc, all not working as still end up getting same message. Have also made an ITunes folder in My music, all to no avail. No viruses and virus library totally up to date. Getting to stage where I want to throw Ipod in bin and get an Iriver as its driving me insane!!

Here is a copy of the ilounge entries. I got one of my more IT literate guys to do this - but it looked easy when he did it!! important thing is it all came back - was a problem as I had moved an external hard drive so one of the locations detailed below showed the old address.
Good luck!!
Click on Start
Clin on Run
Type in "regedit" Enter
Do this step twice as there are two locations.
CTRL F
Type in "My Music"
Double Click and enter the path for where the folder is located.
The exact locations of the 2 entries that I changed are
hkeycurrentuser - software - microsoft - windows - current version - explorer - shell folders
and
as above - windows - current version - explorer - USER shell folders
Try changing the two items from there - if these have already been changed then I'm not sure what to suggest.

I was cleaning my macbook pro and i deleted all my files including itunes. Then when i turn on my itunes it says the folder"itunes" cannot be found or created, and is required. the default location for this folder is inside the "music" folder. help please

My itunes keep saying The folder “iTunes” cannot be found or created, and is required. The default location for this folder is inside the “Music” folder.iTunes needs a library to continue. You may choose an existing iTunes library or create a new one. please help i presschooseexisting cuase i have one but then it says this The file cannot be found or created. The default location for this file is in the “iTunes” folder in the “Music” folder. please help

I was cleaning my macbook pro and i deleted all my files including itunes
Restore your computer from your backup.

Itunes error message "iTunes" cannot be found or created and is required.?

I try to load iTunes and receive the message as follows:
"iTunes" cannot be found or created and is required. The default location for this folder is inside "My Music" folder.
I believe this has occurred because I moved my "My Music" folder to an external drive. But when I moved it back to the internal Hard drive c: this is the result. By the way on my other internal drive d: used to store my music files also I have the same problem.
When I start iTunes with the external Drive attached it reads the external drive.
Can anyone help me overcome this problem please.
I have deleted and reinstalled two versions of iTunes without correcting this problem.
BigW

hi BigW!
let's begin with this document:
iTunes for Windows: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
... but if you run into the complication where "My Music" doesn't appear as an option in TweakUI, try the alternate technique in this post:
Nigel Carpenter: re: Itunes problem
love, b

Best back up software and hardware requirement for the same

Good morning to all,
I would like to know about back solutions. We are a small organization around 60 employees, currently we have windows server 2008 r2 and using symantec backup exc and we back up on external USB drives. Management not happy with Symantec
We plan to upgrade our servers , and moving to VMs and plan to implement network storage.
So we want a back up solution which could back up VMs ,Shared folder and other required data.
What are the best practice and solutions for backups.

Nopes :)
It depends on you. I've been using Symantec from many years now ;)
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Hello everyone. I've got a macbook pro running on mac os x 10.6.8; trying to set up norton antivirus and it requires mac os x 7 or later. How can I safely upgrade to mac os. 7?

Hello everyone. I've got a macbook pro running on mac os x 10.6.8; trying to set up norton antivirus and it requires mac os x 7 or later. How can I safely upgrade to mac os. 7?

leroydouglas is correct, DO NOT install Norton or any other commercial anti virus software. They all work very poorly with Macs. If you insist on AV software, consider Sophos, it is free.
If you do wish to update your OSX, here are the available options:
http://store.apple.com/us/product/D6106Z/A/os-x-lion?find=lion
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
http://www.apple.com/osx/how-to-upgrade/
Ciao.

I am doing a cover for O.M.G. by usher and it requires 4 to 5 different vocal layers. My first "line" of vocals keeps disappearing even after i save it. So I have to redo everything on the top line. Any help?

I am doing a cover for O.M.G. by usher and it requires 4 to 5 different vocal layers. My first "line" of vocals keeps disappearing even after i save it. So I have to redo everything on the top line. Any help?

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

The folder "itunes" cannot be found or created and is required. The default

After I agree to the agreement screen, I receive a message "The folder "itunes" cannot be found or created and is required. The default location for this file is inside the "My Music" Folder". What is wrong? Any suggestions?

this has nothing to do with this topic, but oh well. sometimes some of my music/videos wont let me drap it and drop it into my ipod. it comes up with ! , and right now there are 200 songs on my computer that cant be listened to or put into my ipod. it says that the original files cannot be found. suggestions?

The folder "itunes"can not be found or created and is required

I am getting this error message when I try to open Itunes on my pc. The error message reads:
The folder "itunes" can not be found or created and is required. The default location for this folder is in "my music" folder.
I can see it there and I open it and hit agree to contract and this error message come up. I have deleted the program reinstalled the program. Please if you have any suggestions on how to fix this I would appreciate the help.
Thanks Mkitz

the best place to start with that one is with the following document:
iTunes for Windows: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
... but if you run into the complication where "My Music" doesn't appear as an option in TweakUI, perhaps try the alternate procedure from the following Nigel Carpenter post:
Nigel Carpenter: re: Itunes problem

ITunes Automatically Change EQ Setting Based On Which Airport Express Streaming? I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different

I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different EQ setting to sound just right. Does anyone know of a way to have iTunes automatically change its EQ setting based on which Airport Express it is streaming to?

I'm in the same boat. I have a 6 zone amplifier running with 6 airport expresses to different rooms inside and outside the house. Each has it's own acoustic characteristics. I'd really love to be able to set each airport to equalize based on my SPL frequency sweep I did for each room.
Setting the eq in itunes won't do it as that is global plus I have many more sources for auiod other than itunes that use the AEs directly.

HT201359 The new (09/19/13) Apple terms and conditions require one to click the AGREE button in order to update the apps; however, there is no such button to click on. Therefore I cannot update the apps on my iPhone. Any ideas?

The new (09/19/13) Apple terms and conditions require one to click the AGREE button in order to update the apps; however, there is no such button to click on. Therefore I cannot update the apps on my iPhone. Any ideas?

I was having the same problem, I had to go into iTunes on my laptop and agree to the terms there, and now i can download apps on my iPhone.

What is a video card? And what requirements do you need to have the newest version of iMovie?

What is a video card? And what requirements do you need to have the newest version of iMovie?

http://en.wikipedia.org/wiki/Video_card
http://support.apple.com/kb/ht5842 Maverick requirements.

MTU and latency requirements

Similar Messages

Maybe you are looking for