Much more stability now!!

As people might have read here - see  https://community.bt.com/t5/ADSL-Copper-Broadband-Speed/Interesting-Speed-drop-since-September/m-p/1... and with the help of a BB engineer's visit, who eventually found trouble at my local exchange and no fault with my internal wiring and extensions etc, my ADSL stats are now as follows after 10 days without disconnection.
Things look pretty good and many would envy my DL speed etc. However is there any chance that further enhancements will take place if this connection remains constant? I  have in the past, had measured speeds of at least 16Mbps with the Downstreaam figure (see above) of about 19Mbps?
Solved!
Go to Solution.

stats look good and more important stable with few errors for 10 day connection
your noise margin is still above normal 6db but you may well find with good stable connection the DLM reduces your noise margin to new 'normal' of 3db which will increase your connection speed to somewhere about you hope for - but that make take a couple weeks or so
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

  • I had to reinstall iTunes and lost the library, so I used what I had on my hard drive, but I have much more music on my iPod classic than is in the iTunes library. If I synch now will it delete all that extra music from my iPod?

    I recently had to reinstall iTunes on my PC (Windows 7) and lost most of the library. I restored with what I had on my hard drive on the PC, but there is much more music on my iPod classic than is in the iTunes current library. I'm worried that if I synch now it will delete the extra music from my iPod, some of which I don't have available to re-rip etc.. Will this happen, or is it safe to synch more content without losing from the iPod what is already there but not in my iTunes library on the PC?  Thanks in advance for any help.

    Are you now using a different username from the one you used prior to migrating? If so that is the reason for the problem. You might, then, give this a try:
    To fix Home folder permissions
    Open the Terminal application in the Utilities folder.  At the command line prompt enter or paste the following command line:
    sudo chown -R `id -un`:`id -gn` ~
    Press RETURN.  You will be prompted to enter your admin password which will not be echoed.

  • I installed lv 6.1 on a windows 98 system. As I am having problems of stability (much more than with the former release 6.0), I would like to know if there is some specific problem with windows 98 or there is some patch.

    I installed lv 6.1 on a windows 98 system. As I am having problems of stability (frequent crashes, much more than with the former release 6.0), I would like to know if there is some specific problem with windows 98 or there is some patch available.

    My experience with Win98 is that it is not a very stable system, regardless of software used. For example, Win2000 and XP are far more stable than 98. I've had it crash on its own if I leave the computer on for several days.
    I wouldn't recommend running programs for long time (few days) on this OS.
    This being said, can you be more specific in your question. What kind of stability problems did you have, which VIs did you run (if possible post them here), did you change the interrupts and priority levels on those VI, do you get error messages or blue screen....
    Zvezdana S.

  • Got a mac book pro a month back, the bootup time taken now is much more. Requesting possible solutions. Thanks.

    Got a mac book pro a month back, the bootup time taken now is much more as compared to earlier. Requesting some possible solutions.
    Thanks,
    Sid

    Linc,
    As per your instructions, these were the messages that were logged in the first few minutes after start up.
    Jul 17 21:17:18 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
    Jul 17 21:17:37 localhost com.apple.usbmuxd[22]: usbmuxd-211 built on Feb  8 2011 at 13:49:43 on Feb  8 2011 at 13:49:43, running 64 bit
    Jul 17 21:17:39 localhost bootlog[41]: BOOT_TIME: 1310917638 0
    Jul 17 21:17:39 localhost mDNSResponder[29]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
    Jul 17 21:17:39 localhost configd[13]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
    Jul 17 21:17:39 localhost configd[13]: DHCP en1: INIT-REBOOT transmit failed
    Jul 17 21:17:39 Siddharth-Jaswas-MacBook-Pro configd[13]: setting hostname to "Siddharth-Jaswas-MacBook-Pro.local"
    Jul 17 21:17:39 Siddharth-Jaswas-MacBook-Pro configd[13]: network configuration changed.
    Jul 17 21:17:42 Siddharth-Jaswas-MacBook-Pro blued[16]: Apple Bluetooth daemon started
    Jul 17 21:17:43 Siddharth-Jaswas-MacBook-Pro /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[30]: Login Window Application Started
    Jul 17 21:17:43 Siddharth-Jaswas-MacBook-Pro com.apple.kextd[10]: Can't load /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/InternalModemSu pport.kext - no code for running kernel's architecture.
    Jul 17 21:17:43 Siddharth-Jaswas-MacBook-Pro com.apple.kextd[10]: Failed to load /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/InternalModemSu pport.kext - (libkern/kext) requested architecture/executable not found.
    Jul 17 21:17:43 Siddharth-Jaswas-MacBook-Pro com.apple.kextd[10]: Load com.apple.driver.InternalModemSupport failed; removing personalities.
    Jul 17 21:17:44 Siddharth-Jaswas-MacBook-Pro loginwindow[30]: Login Window Started Security Agent
    Jul 17 21:17:45 Siddharth-Jaswas-MacBook-Pro loginwindow[30]: Login Window - Returned from Security Agent
    Jul 17 21:17:45 Siddharth-Jaswas-MacBook-Pro loginwindow[30]: USER_PROCESS: 30 console
    Jul 17 21:17:45 Siddharth-Jaswas-MacBook-Pro com.apple.launchd.peruser.501[86] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    Jul 17 21:17:45 Siddharth-Jaswas-MacBook-Pro configd[13]: network configuration changed.
    Jul 17 21:17:50 Siddharth-Jaswas-MacBook-Pro com.apple.launchd.peruser.501[86] (com.apple.Kerberos.renew.plist[110]): Exited with exit code: 1
    Jul 17 21:17:50 Siddharth-Jaswas-MacBook-Pro com.apple.usbmuxd[22]: HandleUSBMuxDictionary client 0x101800ab0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Feb  8 2011 at 13:49:43
    Jul 17 21:18:10 Siddharth-Jaswas-MacBook-Pro [0x0-0xf00f].com.google.Chrome[140]: [0717/211810:INFO:breakpad_mac.mm(89)] Breakpad disabled
    Jul 17 21:18:16 Siddharth-Jaswas-MacBook-Pro [0x0-0xf00f].com.google.Chrome[140]: [140:519:54119099370:ERROR:CONSOLE(6465)] "Uncaught TypeError: Cannot read property 'can_uninstall' of undefined", source: chrome://newtab/ (6465)
    Thanks,
    Sid

  • Much more PNG files in iWeb site and make it slowly

    I found that iWeb will change some text into PNG files, it cause anyone can not copy the text from my page, and make the page size bigger and slowly.
    And then, I don't know when iWeb will change text into PNG, when it will not. Sometimes when I write some words in the page, and publish, I can see the words are in text format, but when I continue adding words in it and publish again, I found that all the words has been changed into PNG.
    So, when a page loading in Safari, I can see much more image files in my page, but not text+image same as a normal web page.
    All that make the site loading very slowly. I don't like that if iWeb look like this.

    Instead of creating a hyperlink and then choose a file, put the pdf(s) on the server yourself first.
    Create a separate folder for them.
    Then determine the URL(s) to the file(s).
    In iWeb add a hyperlink *to an external page*. Use one of the URLs to the pdfs.
    Now you can update the pdf without iWeb.

  • Weather not displaying in notification center after iOS 5 update not to mention the entire user interface is much more sluggish.

    Weather not displaying in notification center after iOS 5 update not to mention the entire user interface is much more sluggish.

    Okay, mine now works here is what I did.
    plug in the iPhone, iPad etc
    in iTunes select the phone or iPad
    Under Summary uncheck "Sync with this....."
    Under "Music" uncheck the "Sync Music"
    Let it remove all the songs, dont worry it will come back no problems.
    Once that is all done all the music on the phone or ipad should be gone.
    Now check them both back on and everything should copy back onto it.
    Working now !!!!!

  • Is it the time to go to Google? iTunes is much more expensive than Google Play!

    I know that iTunes is amazing. But now that Google Play's started renting movies in my country (Brazil) I guess if iTunes worth it's high price for everything...
    I have an Apple Tv, what is very good, however isn't complete as well, per exemple that doesn't have a way to change the subtitle size, what's a really simple feature. Otherwise its items are extremelly expense here in my Country. While a movie is rented by Google for R$ 6.99 (~U$3.49) the same movie is rented by iTunes for U$4.99, so I guess: WHY???
    Do you guys have the same felling than I have that Apple has charged so much more money that it would? Anyone here is thinking about migrate to Google Play/Android plataform?
    Why do you guys think about all of that?

    If you find a better price elsewhere, by all means patronize that other company if you wish. We have no control over pricing here, we just being fellow users, and these forums are for technical support questions, not pricing debates or comments, so further discussion on the matter really isn't appropriate here.
    Regards.

  • T-code SUIM taking much more time for generating output for profie change.

    Hi All
    We want to extract report for profile addition and deletion for Users in ECC 6. While executing the the t-code SUIM it is taking much more time (taking more than 20 hrs). This problem is coming after patch application
    Please give the solution/Suggest to minimize the time taken in report generation.
    Thanks-
    Guru Prasad Dwivedi

    Hello Prasad,
    The reason for the performance trouble is a new feature regarding the user change documents. Since note 874850 and 1015043 you will get a more complete overview about the changes regarding a user.
    The disadvantage of that new feature is, that in some customer system usage scenario, the performance is very poor. That's the case, if the central change documents are intensivly used also by other applications and the tables CDPOS, CDHDR, ... contains a very big count of rows. Unfortunatly the user change documents can not be searched by the key columns of the central change docs. - so the bad response time can explained.
    What now ... ?
    There are some work arounds to get the change documents on faster way.
    1st. - You can get the former report output and performance if you
           would use the report RSUSR100 instead of the new RSUSR100N in
           separate mode.
    2nd. - If you want to use the new report RSUSR100N directly and only
           want to get the information about the traditional topics
           (content of USH* tables) you should only mark the search areas
           on the tabstrip 'user attributes') to get a better performance.
         - furthermore limit the date range, if possible
    3rd. - You should regulary (monthly) archive the user relevant documents
           for PFCG and IDENTITY from the central change documents.
           As per our note 1079207 chapter 3 you can reload that archives
           into more selective tables.
           The selection for change documents will be rather faster over
           reloaded archived documents than the documents in the
           central change documents tables.
    Best Regards,
    Guilherme de Oliveira.

  • Test program running taking much more time on high end server T5440 than low end server  T5220

    Hi all,
    I have written the following program and run on both T5440  [1.4 GHz, 95 GB RAM, 32 cores(s), 256 logical (virtual) processor(s),] and  T5220 [(UltraSPARC-T2 (chipid 0, clock 1165 MH) , 8GB RAM, 1 core, 8 virtual processors )] on same OS version.  I found that T5540 server takes more time than T5220. Please find below the details.
    test1.cpp
    #include <iostream>
    #include <pthread.h>
    using namespace std;
    #define NUM_OF_THREADS 20
    struct ABCDEF {
    char A[1024];
    char B[1024];
    void *start_func(void *)
        long long i = 6000;
        while(i--)
                    ABCDEF*             sdf = new ABCDEF;
                    delete sdf;
                    sdf = NULL;
        return NULL;
    int main(int argc, char* argv[])
        pthread_t tid[50];
        for(int i=0; i<NUM_OF_THREADS; i++)
                    pthread_create(&tid[i], NULL, start_func, NULL);
                    cout<<"Creating thread " << i <<endl;
        for(int i=0; i<NUM_OF_THREADS; i++)
                    pthread_join(tid[i], NULL);
                    cout<<"Waiting for thread " << i <<endl;
    After executing the above program on T5440 takes :
    real 0.78
    user 3.94s
    sys 0.05
    After executing the above program on T5220 takes :
    real 0.23
    user 1.43s
    sys 0.03
    It seems that T5440 which is high end server takes almost 3 times more time than T5220 which is low end server.  
    However, I have one more observation. I tried the following program :
    test2.cpp
    #include <iostream>
    #include <pthread.h>
    using namespace std;
    #define NUM_OF_THREADS 20
    struct ABCDEF {
    char A[1024];
    char B[1024];
    int main(int argc, char* argv[])
        long long i = 6000000;
        while(i--)
            ABCDEF*  sdf = new ABCDEF;
            delete sdf;
            sdf = NULL;
        return 0;
    It seems that T5440 server is fast in this case as compaired to T5220 server.
    Could anyone please help me out the exact reason for this behaviour as my application is slow as well on this T5440 server. I have posted earlier as well for the same issue. 
    Thanks in advance !!!
    regards,
    Sanjay

    You already asked this question...
    48 hours earlier, and in the same Solaris forum space
    Repeating the post isn't going to get you a response any faster, and actually now have people NOT respond because you are not showing any patience.
    These are end-user community forums, not a place to expect Oracle Technical Support.   There is no obligation that there be a response.
    If you have a business-critical issue and hope to get accurate and timely response, then use your service contract credentials to open a Support request.
    This new redundant post is locked.
    Edit:
    It appears that at the same time the O.P. posted this redundant thread, they also posted the same question to at least one other forum web site:
    http://www.unix.com/solaris/229269-test-program-running-taking-much-more-time-high-end-server-t5440-than-low-end-server-t5220.html

  • AUDIO TO SCORE is gone and it was much more precise for drum doubling than the doubling function itself.

    AUDIO TO SCORE. I used that all the time for drum doubling for the following reasons:
    In Logic 9 i always used audio to score for drum doubling because it had much more control over essential parameters than the drum replacement window. Parameters like: Granulation, Smooth Release and Attack Range made sure that i didn't have any flams, too few notes, too many notes etc etc. AND you could see in the sample editor (below the waveform) immediately the effect of the changes made in those parameters!
    Now with these parameters gone and only the drum doubling function left, what was a real pro function has become much more cumbersome to use. You can no longer see in detail what changes in parameters does to the out-coming midi. And the lack of the detailed parameters makes drum doubling drop or miss notes, makes flams with the original drum track etc etc.... In short. The drum doubling function is inadequate for pro results.
    So this is my suggestion: Apple probably wont reinstate audio to score as it was (i'd love it if they did, it's essential to me and others who does rock mixes in logic instead of protools). But you can do something that's even better:
    In the audio file editor (previously the sample editor) make the old audio to score into an advanced drum doubling/replacement editor. Take the audio to score window and parameters and reinstate them BUT instead of outputting different note values make them output to a desired note of the users choice (e.g C1). Without opening the library. It cluters the window and often people want to use their own drum software than apples samples.
    It's the realtime view in the bottom of the audiofile editor that makes a difference. And the missing parameters. Without these things a good outcome is based on luck rather than visual reference.

    I was doing drum replacement ( adding ) with Audio-to-score for years, and must say, drum replacement is working for me without any flams and much better and 2x faster. I think it is pro feature, with advanced transient detector. Only problem is velocity,as in Audio-to-score.
    If automatic threshold not working on some material, you can do  fine transient edits in audio editor with visual realtime feedback, you can change output note and delay globally. Also you can hear ( in compare with Audio-to-score), that's why library is opened and sample replacement -after, not difficult to do.

  • Why is 24GB or RAM so much more then 12GB ?

    I understand that it is double the size but man is it way more expensive.
    It seems like anyone here that has built a core i7 has gone the 12GB route but im sure would like to max out the motherboard at 24GB
    You hear people say that RAM is cheap but not 24GB.
    Need 2 sets of these to make 24GB.
    http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2010170147%201052346982&name=1 2GB%20%283%20x%204GB%29
    Just curious:  Glenn

    DDR3 has taken quite some time to get produced in 2 GB sticks and they were initially much more expensive than DDR2 sticks. Now that the i7 has gained a firm foothold one sees the price of 2 GB DDR3 sticks dropping rapidly, but where people were coming from 4 GB machines or even less, 12 GB memory seemed more than enough for the future, so there was hardly any demand for the latest sticks in 4 G sizes. For video editors and the upcoming 64 bit CS5 applications, one may see some more interest in 4 GB sticks, more manufacturers to enter that specific market and dropping prices as a consequence of increased competition in that smallish market, but I think it will be only by next year that the sizable premium on 4 G sticks will diminish somewhat. As always, being at the leading edge of technology carries a hefty price-tag.
    Now with TESLA around the corner and the C2070 co-processor which carries 6 GB of its own memory, and is not an SLI solution (which is initially not supported in CS5, according to Dennis), support for this co-processor may alleviate the memory requirements for more than 12 GB.
    Price erosion only happens when more manufactures get into the game and demand rises, leading to more competition. Just remember what happened with the prices of DVD or BRD players, plasma or LCD flat screens, etc. So, give it some time...

  • When ASM reads my block, it will usually read much more than just the block I requested.

    When ASM reads my (8K) block, it will usually read much more than just the block I requested.
    4 questions :
    1) Am I right when I presume ASM will increase my request to 1 complete AU sized retrieval action done on the I/O subsystem? 
    2) Now what interests me is where does the rest of that I/O size sleep / reside ?
    3) Under what circumstances will those poor, initially unused and discarded KB's be revived and be reckognized for their true value. Will only certain actions, like a scan, cause the 'overhead' to be used ?
    kind regards, Niek

    Hi Aman,
    ASM does not do IOs .
    ASM only gives extent map to clients and clients take that pointers and do direct IO on that block.
    This is very much true statement and explains what will happen if data block is not available at buffer .
    That's why most of IO errors are getting printed on rdbms alertlog file ,rather ASM .Which inturn confirms my statement...
    ASM level DBWR ,LGWR are related to ASM level data processing .
    Keeping above things in mind ,it clarifies ASM does not hold any IOs /place on sleep.
    ASM at diskgroup level,always does IOs  as per au_size of  that diskgroup .
    Regards,
    Aritra

  • What is much more efficient for building Web Services: RSS or Axis

    Hi ,
    i am focusing on a new feature in our web seftware product and we wish to integrate a web service communication allowing our customers to retrieve all needed data.
    Ok now the problem, as far as the technical choice is concerned , i heard a lot about RSS and also about some SOAP engines ( axis, xfire,...) , si my question is which the best choice? what make one better then the other ? which is much more secure once implemented ?
    please i am eager to hear your advises!!
    thanks

    Hello, has anyone done any integration with Java api or web services? Is any information available?

  • Numbers is much more responsive under leopard

    I am finding that Numbers is much more responsive under leopard... no longer an irritation waiting for the program to become usable after switching to it... still a bit more delay than there should be but much better.
    Stephen

    it seems to me to still be awfull slow for the most simple tasks like changing the number of decimals to display, changing it from 1 to 2 digits, on a table that is only 28 rows long and 2 columns wide, it takes about 2 minutes
    I just tried creating a default table - 40-odd rows, 12 columns, and filled them all with pi(). Changing the number of decimal places for the whole table went very quickly - maybe 0.5 seconds.
    I then tried filling with nearly all different numbers, with different numbers of decimals. Now changing the number of decimals takes several seconds each time.

  • "Your iMac was restarted because of a problem" occurring more frequently now...

    Unsure whether it has anything to do with upgrading to OS X Mavericks, but my iMac has been crashing a lot more frequently these days.  I'm not talking about 4 -5 crashes a day, but at times, 3 - 4 occurrences a week.  First I didn't think much of it.  But since the crashing has become more frequent now, I have have just decided to copy the most recent crash report, which occurred  about half an hour ago and is as follows:
    iMac CRASH REPORT DEC 03, 2013 2:37 AM: Anonymous UUID:       8B8A5FAD-FF93-6E4E-95F5-EE21AFDB9A23 Tue Dec  3 02:27:27 2013panic(cpu 0 caller 0xffffff800ecdc19e): Kernel trap at 0xffffef7f90612808, type 14=page fault, registers:CR0: 0x0000000080010033, CR2: 0xffffef7f90612808, CR3: 0x000000003b303000, CR4: 0x0000000000000660RAX: 0xffffff80dafc1000, RBX: 0x00000000ffffffff, RCX: 0x0000000000000028, RDX: 0xffffff80236cc5e8RSP: 0xffffff801be5bb78, RBP: 0xffffff801be5bb90, RSI: 0xffffff80223a8a84, RDI: 0xffffff80dafc1000R8:  0xffffff801be5bbb8, R9:  0x0000000000000000, R10: 0xffffff80223a8a84, R11: 0xffffef7f90612808R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0xffffff7f90698d50, R15: 0xffffff801be5bc80RFL: 0x0000000000010246, RIP: 0xffffef7f90612808, CS:  0x0000000000000008, SS:  0x0000000000000010Fault CR2: 0xffffef7f90612808, Error code: 0x0000000000000010, Fault CPU: 0x0 Backtrace (CPU 0), Frame : Return Address0xffffff801be5b800 : 0xffffff800ec22f69 0xffffff801be5b880 : 0xffffff800ecdc19e 0xffffff801be5ba50 : 0xffffff800ecf3606 0xffffff801be5ba70 : 0xffffef7f90612808 0xffffff801be5bb90 : 0xffffff800f0cd83e 0xffffff801be5bbf0 : 0xffffff800f0cb28f 0xffffff801be5bd40 : 0xffffff800ecb6008 0xffffff801be5be50 : 0xffffff800ec26bb1 0xffffff801be5be80 : 0xffffff800ec139b5 0xffffff801be5bef0 : 0xffffff800ec1e003 0xffffff801be5bf70 : 0xffffff800ecc921d 0xffffff801be5bfb0 : 0xffffff800ecf3e26  BSD process name corresponding to current thread: WindowServer Mac OS version:13A603 Kernel version:Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393Kernel slide:     0x000000000ea00000Kernel text base: 0xffffff800ec00000System model name: iMac9,1 (Mac-F2218FA9) System uptime in nanoseconds: 26826506840522last loaded kext at 569282142986: com.apple.filesystems.smbfs    2.0.0 (addr 0xffffff7f91009000, size 335872)last unloaded kext at 493751865296: com.apple.filesystems.msdosfs    1.9 (addr 0xffffff7f91009000, size 57344) loaded kexts:com.Cycling74.driver.WondershareAudioDevice    1.5.2com.hzsystems.terminus.driver    4net.telestream.driver.TelestreamAudio    1.0.5com.Cycling74.driver.Soundflower    1.5.2com.globaldelight.driver.BoomDevice    1.1com.smashart.driver.AirPhonesSpeakers    1.0com.apple.filesystems.smbfs    2.0.0com.apple.driver.AppleBluetoothMultitouch    80.14com.apple.driver.AppleHWSensor    1.9.5d0com.apple.driver.AGPM    100.14.11com.apple.iokit.IOUserEthernet    1.0.0d1com.apple.iokit.IOBluetoothSerialManager    4.2.0f6com.apple.Dont_Steal_Mac_OS_X    7.0.0com.apple.filesystems.autofs    3.0com.apple.driver.AudioAUUC    1.60com.apple.driver.AppleMikeyHIDDriver    124com.apple.driver.AppleHDA    2.5.2fc2com.apple.driver.AppleLPC    1.7.0com.apple.GeForceTesla    8.1.8com.apple.driver.AppleHWAccess    1com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0com.apple.driver.AppleMikeyDriver    2.5.2fc2com.apple.driver.AppleUpstreamUserClient    3.5.13com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.2.0f6com.apple.driver.AppleBacklight    170.3.5com.apple.driver.AppleMCCSControl    1.1.12com.apple.driver.AppleIRController    325.7com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1com.apple.BootCache    35com.apple.iokit.SCSITaskUserClient    3.6.0com.apple.driver.XsanFilter    404com.apple.iokit.IOAHCIBlockStorage    2.4.0com.apple.driver.AppleUSBHub    650.4.4com.apple.driver.AppleFWOHCI    4.9.9com.apple.driver.AirPort.Brcm4331    700.20.22com.apple.driver.AppleAHCIPort    2.9.5com.apple.nvenet    2.0.21com.apple.driver.AppleUSBEHCI    650.4.1com.apple.driver.AppleUSBOHCI    650.4.1com.apple.driver.AppleRTC    2.0com.apple.driver.AppleHPET    1.8com.apple.driver.AppleACPIButtons    2.0com.apple.driver.AppleSMBIOS    2.0com.apple.driver.AppleACPIEC    2.0com.apple.driver.AppleAPIC    1.7com.apple.driver.AppleIntelCPUPowerManagementClient    216.0.0com.apple.nke.applicationfirewall    153com.apple.security.quarantine    3com.apple.driver.AppleIntelCPUPowerManagement    216.0.0com.apple.driver.IOBluetoothHIDDriver    4.2.0f6com.apple.driver.AppleMultitouchDriver    245.13com.apple.AppleGraphicsDeviceControl    3.4.12com.apple.iokit.IOSurface    91com.apple.iokit.IOSerialFamily    10.0.7com.apple.iokit.IOBluetoothFamily    4.2.0f6com.apple.kext.triggers    1.0com.apple.driver.DspFuncLib    2.5.2fc2com.apple.vecLib.kext    1.0.0com.apple.nvidia.classic.NVDANV50HalTesla    8.1.8com.apple.driver.IOPlatformPluginLegacy    1.0.0com.apple.driver.IOPlatformPluginFamily    5.5.1d27com.apple.driver.AppleSMBusPCI    1.0.12d1com.apple.driver.AppleHDAController    2.5.2fc2com.apple.iokit.IOHDAFamily    2.5.2fc2com.apple.nvidia.classic.NVDAResmanTesla    8.1.8com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.2.0f6com.apple.iokit.IOFireWireIP    2.2.5com.apple.driver.AppleUSBAudio    2.9.3f17com.apple.iokit.IOAudioFamily    1.9.4fc11com.apple.kext.OSvKernDSPLib    1.14com.apple.driver.AppleSMC    3.1.6d1com.apple.driver.AppleBacklightExpert    1.0.4com.apple.driver.AppleSMBusController    1.0.11d1com.apple.iokit.IONDRVSupport    2.3.6com.apple.iokit.IOGraphicsFamily    2.3.6com.apple.iokit.IOUSBHIDDriver    650.4.4com.apple.driver.AppleUSBMergeNub    650.4.0com.apple.iokit.IOSCSIBlockCommandsDevice    3.6.0com.apple.iokit.IOUSBMassStorageClass    3.6.0com.apple.driver.AppleUSBComposite    650.4.0com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.6.0com.apple.iokit.IOBDStorageFamily    1.7com.apple.iokit.IODVDStorageFamily    1.7.1com.apple.iokit.IOCDStorageFamily    1.7.1com.apple.iokit.IOAHCISerialATAPI    2.6.0com.apple.iokit.IOSCSIArchitectureModelFamily    3.6.0com.apple.iokit.IOUSBUserClient    650.4.4com.apple.iokit.IOFireWireFamily    4.5.5com.apple.iokit.IO80211Family    600.34com.apple.iokit.IOAHCIFamily    2.6.0com.apple.iokit.IONetworkingFamily    3.2com.apple.iokit.IOUSBFamily    650.4.4com.apple.driver.NVSMU    2.2.9com.apple.driver.AppleEFINVRAM    2.0com.apple.driver.AppleEFIRuntime    2.0com.apple.iokit.IOHIDFamily    2.0.0com.apple.iokit.IOSMBusFamily    1.1com.apple.security.sandbox    278.10com.apple.kext.AppleMatch    1.0.0d1com.apple.security.TMSafetyNet    7com.apple.driver.AppleKeyStore    2com.apple.driver.DiskImages    371.1com.apple.iokit.IOStorageFamily    1.9com.apple.iokit.IOReportFamily    21com.apple.driver.AppleFDEKeyStore    28.30com.apple.driver.AppleACPIPlatform    2.0com.apple.iokit.IOPCIFamily    2.8com.apple.iokit.IOACPIFamily    1.4com.apple.kec.pthread    1com.apple.kec.corecrypto    1.0Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 2.66 GHz, 8 GB, SMC 1.45f0Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MBMemory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A54463531323634485A2D3147344D31Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A54463531323634485A2D3147344D31AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.22)Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 3 incoming serial portsNetwork Service: AirPort, AirPort, en1Serial ATA Device: WDC WD6400AAKS-40H2B0, 640.14 GBSerial ATA Device: OPTIARC DVD RW AD-5670SUSB Device: Built-in iSightUSB Device: My Passport 0748USB Device: Rocketfish HD WebcamUSB Device: IR ReceiverUSB Device: Bose USB AudioUSB Device: BRCM2046 HubUSB Device: Bluetooth USB Host ControllerThunderbolt Bus:
    My iMac is the early 2009 model.  Would appreciate some help with deciphering this piece of info, or perhaps, guide me as to where I should be looking for info.  Thanks in advance.

    Hi,
    So I uninstalled the programs I'm familiar with, from the list that thomas_r provided, namely:
         Wondershare
         Boom
         AirPhone speakers
    I haven't experienced any crashing until earlier today.  Crash report as follows:
    Anonymous UUID:  
    8B8A5FAD-FF93-6E4E-95F5-EE21AFDB9A23
    Mon Dec 30 04:17:51 2013
    panic(cpu 0 caller 0xffffff801fedc19e): Kernel trap at 0xffffff801fe3a122, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffef8108223ff8, CR3: 0x0000000022c33000, CR4: 0x0000000000000660
    RAX: 0x0000000000004000, RBX: 0xffffef8108220000, RCX: 0xffffff8108230000, RDX: 0xffffff8032688460
    RSP: 0xffffff8108203e00, RBP: 0xffffff8108203e10, RSI: 0x000000002789ac07, RDI: 0xffffff8020489360
    R8:  0x0000000000000004, R9:  0xffffff80352a3490, R10: 0x00000000000003ff, R11: 0xffffffffffffffff
    R12: 0xffffff80328522a8, R13: 0xffffff8020489cd0, R14: 0x0000000000000000, R15: 0xffffff80328522a8
    RFL: 0x0000000000010082, RIP: 0xffffff801fe3a122, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0xffffef8108223ff8, Error code: 0x0000000000000002, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff8108203a90 : 0xffffff801fe22f69
    0xffffff8108203b10 : 0xffffff801fedc19e
    0xffffff8108203ce0 : 0xffffff801fef3606
    0xffffff8108203d00 : 0xffffff801fe3a122
    0xffffff8108203e10 : 0xffffff801fe3a188
    0xffffff8108203e30 : 0xffffff801fe456c3
    0xffffff8108203e60 : 0xffffff801fe486d9
    0xffffff8108203e90 : 0xffffff801fe4853e
    0xffffff8108203ec0 : 0xffffff801fe20b53
    0xffffff8108203ef0 : 0xffffff801fe47a2c
    0xffffff8108203f20 : 0xffffff801fe4a4be
    0xffffff8108203fb0 : 0xffffff801fed6aa7
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13B42
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:
    0x000000001fc00000
    Kernel text base: 0xffffff801fe00000
    System model name: iMac9,1 (Mac-F2218FA9)
    System uptime in nanoseconds: 54030898226038
    last loaded kext at 1593152537510: com.apple.macos.driver.AppleUSBEthernetHost
    7.0 (addr 0xffffff7fa2200000, size 28672)
    last unloaded kext at 1665240546986: com.apple.macos.driver.AppleUSBEthernetHost
    7.0 (addr 0xffffff7fa2200000, size 20480)
    loaded kexts:
    com.hzsystems.terminus.driver
    4
    net.telestream.driver.TelestreamAudio
    1.0.5
    com.Cycling74.driver.Soundflower
    1.5.2
    com.globaldelight.driver.BoomDevice
    1.1
    com.smashart.driver.AirPhonesSpeakers
    1.0
    com.apple.filesystems.smbfs
    2.0.0
    com.apple.filesystems.afpfs
    11.0
    com.apple.nke.asp-tcp
    8.0.0
    com.apple.driver.AppleBluetoothMultitouch
    80.14
    com.apple.driver.AppleHWSensor
    1.9.5d0
    com.apple.driver.AGPM
    100.14.11
    com.apple.iokit.IOUserEthernet
    1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager
    4.2.0f6
    com.apple.Dont_Steal_Mac_OS_X
    7.0.0
    com.apple.filesystems.autofs
    3.0
    com.apple.driver.AudioAUUC
    1.60
    com.apple.driver.AppleMikeyHIDDriver
    124
    com.apple.driver.AppleHDA
    2.5.3fc1
    com.apple.driver.ACPI_SMC_PlatformPlugin
    1.0.0
    com.apple.driver.AppleMikeyDriver
    2.5.3fc1
    com.apple.driver.AppleBacklight
    170.3.5
    com.apple.GeForceTesla
    8.1.8
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
    4.2.0f6
    com.apple.driver.AppleHWAccess
    1
    com.apple.driver.AppleLPC
    1.7.0
    com.apple.driver.AppleUpstreamUserClient
    3.5.13
    com.apple.driver.AppleMCCSControl
    1.1.12
    com.apple.driver.AppleIRController
    325.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
    1.0.0d1
    com.apple.BootCache
    35
    com.apple.iokit.SCSITaskUserClient
    3.6.0
    com.apple.driver.XsanFilter
    404
    com.apple.iokit.IOAHCIBlockStorage
    2.4.0
    com.apple.driver.AppleUSBHub
    650.4.4
    com.apple.driver.AirPort.Brcm4331
    700.20.22
    com.apple.driver.AppleFWOHCI
    4.9.9
    com.apple.driver.AppleAHCIPort
    2.9.5
    com.apple.nvenet
    2.0.21
    com.apple.driver.AppleUSBEHCI
    650.4.1
    com.apple.driver.AppleUSBOHCI
    650.4.1
    com.apple.driver.AppleRTC
    2.0
    com.apple.driver.AppleHPET
    1.8
    com.apple.driver.AppleACPIButtons
    2.0
    com.apple.driver.AppleSMBIOS
    2.0
    com.apple.driver.AppleACPIEC
    2.0
    com.apple.driver.AppleAPIC
    1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient
    216.0.0
    com.apple.nke.applicationfirewall
    153
    com.apple.security.quarantine
    3
    com.apple.driver.AppleIntelCPUPowerManagement
    216.0.0
    com.apple.security.SecureRemotePassword
    1.0
    com.apple.driver.AppleMultitouchDriver
    245.13
    com.apple.driver.IOBluetoothHIDDriver
    4.2.0f6
    com.apple.AppleGraphicsDeviceControl
    3.4.12
    com.apple.iokit.IOSurface
    91
    com.apple.iokit.IOSerialFamily
    10.0.7
    com.apple.iokit.IOBluetoothFamily
    4.2.0f6
    com.apple.kext.triggers
    1.0
    com.apple.driver.DspFuncLib
    2.5.3fc1
    com.apple.vecLib.kext
    1.0.0
    com.apple.driver.AppleHDAController
    2.5.3fc1
    com.apple.iokit.IOHDAFamily
    2.5.3fc1
    com.apple.driver.AppleSMC
    3.1.6d1
    com.apple.driver.IOPlatformPluginLegacy
    1.0.0
    com.apple.driver.AppleSMBusPCI
    1.0.12d1
    com.apple.driver.AppleBacklightExpert
    1.0.4
    com.apple.iokit.IOFireWireIP
    2.2.5
    com.apple.iokit.IOBluetoothHostControllerUSBTransport
    4.2.0f6
    com.apple.driver.AppleUSBAudio
    2.9.3f17
    com.apple.iokit.IOAudioFamily
    1.9.4fc11
    com.apple.kext.OSvKernDSPLib
    1.14
    com.apple.driver.IOPlatformPluginFamily
    5.5.1d27
    com.apple.nvidia.classic.NVDANV50HalTesla
    8.1.8
    com.apple.driver.AppleSMBusController
    1.0.11d1
    com.apple.nvidia.classic.NVDAResmanTesla
    8.1.8
    com.apple.iokit.IONDRVSupport
    2.3.6
    com.apple.iokit.IOGraphicsFamily
    2.3.6
    com.apple.driver.CoreStorage
    380
    com.apple.iokit.IOUSBHIDDriver
    650.4.4
    com.apple.driver.AppleUSBMergeNub
    650.4.0
    com.apple.iokit.IOSCSIBlockCommandsDevice
    3.6.0
    com.apple.iokit.IOUSBMassStorageClass
    3.6.0
    com.apple.driver.AppleUSBComposite
    650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice
    3.6.0
    com.apple.iokit.IOBDStorageFamily
    1.7
    com.apple.iokit.IODVDStorageFamily
    1.7.1
    com.apple.iokit.IOCDStorageFamily
    1.7.1
    com.apple.iokit.IOAHCISerialATAPI
    2.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily
    3.6.0
    com.apple.iokit.IOUSBUserClient
    650.4.4
    com.apple.iokit.IO80211Family
    600.34
    com.apple.iokit.IOFireWireFamily
    4.5.5
    com.apple.iokit.IOAHCIFamily
    2.6.0
    com.apple.iokit.IONetworkingFamily
    3.2
    com.apple.driver.NVSMU
    2.2.9
    com.apple.iokit.IOUSBFamily
    650.4.4
    com.apple.driver.AppleEFINVRAM
    2.0
    com.apple.driver.AppleEFIRuntime
    2.0
    com.apple.iokit.IOHIDFamily
    2.0.0
    com.apple.iokit.IOSMBusFamily
    1.1
    com.apple.security.sandbox
    278.10
    com.apple.kext.AppleMatch
    1.0.0d1
    com.apple.security.TMSafetyNet
    7
    com.apple.driver.AppleKeyStore
    2
    com.apple.driver.DiskImages
    371.1
    com.apple.iokit.IOStorageFamily
    1.9
    com.apple.iokit.IOReportFamily
    21
    com.apple.driver.AppleFDEKeyStore
    28.30
    com.apple.driver.AppleACPIPlatform
    2.0
    com.apple.iokit.IOPCIFamily
    2.8
    com.apple.iokit.IOACPIFamily
    1.4
    com.apple.kec.pthread
    1
    com.apple.kec.corecrypto
    1.0
    Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 2.66 GHz, 8 GB, SMC 1.45f0
    Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A54463531323634485A2D3147344D31
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A54463531323634485A2D3147344D31
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 3 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD6400AAKS-40H2B0, 640.14 GB
    Serial ATA Device: OPTIARC DVD RW AD-5670S
    USB Device: Built-in iSight
    USB Device: My Passport 0748
    USB Device: Rocketfish HD Webcam
    USB Device: Bose USB Audio
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: IR Receiver
    Thunderbolt Bus:
    However, I still see the kexts for  Boom and AirPhoneSpeakers.  I also want to add that both Boom and AirPhoneSpeakers didn't have an uninstaller available.  Wondershare did.  Instead, I used AppZapper to uninstall these apps.    Is that the reason why I still see the kexts for these programs?
    Apps for the following kexts are not available in my computer:
         com.hzsystems.terminus.driver
         net.telestream.driver.TelestreamAudio
         com.Cycling74.driver.Soundflower
    Is there any way to rid of these kexts other than uninstalling?  What about for apps without it's own uninstaller? 
    Please advise.  Thank you.

Maybe you are looking for

  • Adobe Cloud Teams error 194:10

    Hi, I've been using Premiere and Dreamweaver fine until yesterday. I now get an error "194:10 maximum activations exceeded" when I try and launch either one. Premiere is my main concern and I can confirm it's only installed on one computer and as suc

  • Could not create Java VM to install 8.1.7 on RedHat 9

    I am trying to install 8i 8.1.7 on redhat linux 9. when I start the installer I get this error and nothing happens after it. I do have java installed on the pc. Whats the cause. I did the preinstall steps and am using the oracle account to start the

  • Copy and paste - can't copy parts of a SMS message

     I'm getting really frustrated with the copy part of copy/paste within a SMS. In the SMS - If I tap on any number or word = nothing happens (if nothing is underlined), If I tap on a number underlined = I get the option to phone or skype?? If I double

  • Projected Image size different using VGA and HDMI

    From my ipad mini with a VGA connector I get a full screen image on an Epson projector but a much smaller image using an HDMI connector - How can I get a full screen with HDMI?

  • OBIEE - Oracle BI Server service (NQSServer.exe) goes down

    Hello, I'm experiencing a issue with the Oracle BI Server service (NQSServer.exe), it goes down when the CPU reaches to the 100% with this service. This happens when the Job Manager tries to send 20mails (ibots) at the same time. This never happen be