Much of my audio was moved to the right +.6

Yesterday I did a lot of editing with the timing of clips. I would find some clips coming in too soon so I would make adjustments to make them start later so as to make the pacing and flow of the video better.
The video is long at almost 2 hours. I thought with all the changes I was making I (thought I) was keeping all the audio in line with all the video, however I did not think to be constantly looking far down the timeline to make sure.
Today I started looking farther down the timeline and noticed in all the rest of the video past where I had made changes, many audio clips had been moved to the right .6 I started to try to manually move it all back but found it would take just as long to do that as to redo all the editing I did yesterday. Plus some audio is purposefully out of line and I think I would lose track of those that are supposed to be out of line and those that were thrown off yesterday.
Today after every edit I make I'm going to look at the entire timeline to make sure my audio has not been thrown off so that hopefully I can understand which changes that I made caused this.
Does anyone have any tips to prevent this from happening again? Thanks.

If you decide not to follow Ken's very good advice, another option is to make sure that all your audio tracks are temporarily locked before making any video-only edits. This will prevent inadvertent changes to your audio tracks.
Also, it is always a good practice to briefly inspect your timeline after each edit. It takes only a second or two and can help you quickly spot any errors that may have be added to your timeline as a result of the edit.

Similar Messages

  • After Install IOS 8 and 8.0.2, the Ipad audio was distorted, and the bluetooth connection to audio speaker have wheezing.

    After Install IOS 8 and 8.0.2, the Ipad audio was distorted, and the bluetooth connection to audio speaker have wheezing.

    I ALSO just updated my brand new iphone 6 to 8.0.2, and I ALSO had my cellular service BRICKED.
    All I get on the signal meter is Verizon 1x.  Every so often 3G would popup and you could send a text (no calls though) but it's gone in seconds. So  I can't send texts or make phone calls.
    This phone worked immediately before the update and stopped working immediately after the update.
    My neighbor has a iphone 5S. He updated to 8.0.2 lat week and had no problems UNTIL just this morning, when his phone stopped working - no cellular voice or data. He downgraded back to ios 8.0 but his cellular service never came back.
    Called verizon - was told there were no service outages and then I got transferred to tech team.
    Tech team had do all the Apple troubleshooting steps but nothing more. So they said "take it back."
    So this BRAND NEW iPhone 6 phone is BRICKED because of iOS 8.0.2.
    Thanks Apple!

  • The progress bar (in green)which was visisble at the right hand side down in Firefox 3.6.8,is not visible here which seems little unfriendly.

    The progress bar (in green)which was visisble at the right hand side down in Firefox 3.6.8,is not visible here which seems little unfriendly.Or is it available(may be there is some settings i have to apply)?Please tell me if it is available in this version or not,and if yes then how to bring it.Thanks!

    You can add the progress indicator in the Firefox 4 add-ons bar with the [https://addons.mozilla.org/firefox/addon/status-4-evar/ Status-4-Evar] add-on

  • Icons in the addon bar have moved from the right hand corner to the left

    Hi everybody,
    I've recently updated to the most current Firefox 4b10. I'm currently using the addon bar on the bottom that holds several addon-related icons (like firebug etc.). Those do still work, but for some reason they have moved from the right-hand corner of the addon-bar (where they have always been) to the left side for no apparent reason.
    I know it's kind of a little issue, but it is really disturbing since I keep looking in the wrong corner after having the icons there for so many years. Is there any way I can revert that?
    Thanks!
    mrmister

    Please report this problem to Firebug team,
    http://code.google.com/p/fbug/issues/list

  • I need to know how to "compress" the Folder Tree.  The File folders are moving to the right and out of sight in Lightroom 5.

    I need to know how to "compress" the Folder Tree.  The File folders are moving to the right and out of sight in Lightroom 5.

    A couple of suggestions that may help:
    - Make sure you've made the left-hand column as wide as possible by grabbing the divider between the column and the Library grid view.
    - You can hide a parent folder from the display by right-clicking it and selecting Hide This Parent. This will shift all the child folders to the left.

  • HELP!! Audio is moving into the videoclip.Horror !!!

    Without anything, than normal editing , audio in moving into videoclip....Makes Video black and audio is "insert" .. everything is changed..HORROR
    By repacing audio th the right place... crash .... "interface Error"  ... what the fuxxx...
    What can i do?

    I have some pictures for you, that you see, what i mean.
    Pic 1 Bugreport
    Pic 2 The WOM 241sound file i want to copy and paste, do you see the audio under the video..?
    Pic 3 Woom … my duplicated audio is there.. the audio under the video now is IN the video
    Pic 4 see the details…
    I deleted everything ..with FCP remover, i installed all new via AppStore… again
    But news… when the audio is complete OVER video in the top, where all other are located… the audio does not move to the video. then i can copy and paste……..

  • When output SSRS report to Excel, Plus sign was moved to the far left pane in Excel. How to fix it?

    Hi there:
       I've created a SSRS report and looks good inside Report Manager, See below . plus "+" is in the right place and
    if I click it, it will expand. 
    However, when I output results into excel, it becomes this, notice those plus sign "+" have been shifted to the far left and they are
    not line up with each month either... Is there any way to fix in the excel so that users could see exactly what they see in the Report Manger? 
     Thanks
    --Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

    Hi cat_ca,
    Microsoft Excel has limitations with how it manages hidden and displayed report items when they are exported. When we export a report to Microsoft Excel format, groups, rows, and columns that contain report items that can be toggled are rendered as Excel
    outlines. Excel creates outlines that expand and collapse rows and columns across the entire row or column which can cause the collapse of report items that are not intended to be collapsed. This is by design. For more information about this, please see Show
    and Hide section in the link below:
    http://msdn.microsoft.com/en-IN/library/dd255234.aspx#ReportItemsExcel
    The following similar thread is for your reference:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/06303610-5f6b-4c90-80a6-628552a3d36c/ssrs-2008-table-with-line-grouping-excel-export-problem-with-toggle-item?forum=sqlreportingservices
    Thank you for your understanding.
    Regards,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Power Mac G5 Audio is outputting only the right channel

    I have an audio problem with my PowerPc Audio card, I presume. It is only outputting the right channel. I have a set of computer speakers and when I go into System Preferences and move the balance slider, there is only sound coming from the right channel. Absolutely nothing from the left.
    I found this problem when editing in FCP and needing to do a split track with VO on channel 1 and Nats and music on channel 2. I could see the meters showing the audio output from channel 1 but no sound coming through the Mac's left channel output.
    Also, I have a DeckLink extreme card in my system and when I test the L-R channel output I get the same problem. I do not know if the decklink is somehow using the Mac audio card for help with its output. I would think that it is using its own hardware for generating the audio output from the card.
    Hardware issue? Time for a Mac Genius repair? Don't know if there is any workarounds or fixes before I go that route. Any help would be appreciated.
    Thanks
    Doug

    No I didn't but I run my Mac's output into an analog mixer and then out to my speakers.
    When outputting through channel 2 only, both speakers work, yet when I pan to channel 1 the sound drops out. As I pan from full channel 2, where both speakers are up full, you can hear the sound fade out.
    Also, I got the Deck Link card to work through my mixer. The L and R channels are outputting through separate inputs in the mixer and work independently and correctly. I even changed out the mini stereo cable just in case and still no left channel out of the Mac.
    Very weird! I've even repaired and defragged my system disk in case it is some sort of corrupted code. Just grasping at straws before I take it to a Mac Genius.
    Thanks for writing. I appreciate any and all suggestions.
    Doug

  • On start all of the folders on the desktop are moved to the right side of the screen and jumbled together, not as I had them organized on the left side of the screen. OS X v10.6.8

    sometimes on start all of the folders on the desktop are moved alphabetically to the right side of the screen, not as I had them organized on the screen before. also sometimes  my folders  when opened, move and resize themselves too...

    Start with one of these:

  • My page has moved to the right of the screen so I do not have a full centre page. How do I move the page back to the centre of the screen. There is no bottom scroll bar for me to move the page to the left of the screen. Hope this makes sense

    The picture on my screen has moved over to the right hand side and I want it to be in the centre. How do I move it back as I do not have a scroll bar at the bottom of the page to do this and am unable to drag it back. Hope this makes sense!

    Its a toolbar thing. I got rid of my Babylon toolbar and it sorted it out!

  • My ipod audio only coming through the right headphone whats wrong?, My ipod audio only coming through the right headphone whats wrong?

    Ive tried with mulitple headphones but my audio on my ipod is only coming through the right headphone. Whats wrong with my ipod? WIll I need to purchase another one?

    I don't know if this is a common issue: I bought an iphone from someone and notice that only the plug design of the stereo headphone that comes with it fits in its receptacle. I tried others that are generally for the same size but they can't go deep enough in the receptacle thus can't get any audio. One thing I noticed is that this iphone's receptacle is deeper in the device than usual, so any other plugs other than the one provided can't fit. I can't use my external speakers with it!!! I fail to understand this. All all iphones like this or is it a defect particular to mine? After all, my ipod touch doesn't have this issue! If anybody knows, please tell me.

  • My sidebar has moved from the right (where I want it) to the top

    This used to work great.
    The template does show  the sidebar to the right - but almost exactly beside the header (I think I've moved it somehow).
    The site pages (after an update) show the sidebar ABOVE the header - but, below the menu bar.
    I'd rather not have to start over - but can't seem to change  the template in any way that will cause the sidebar to show up where I need it.
    Thanks
    Sheryl

    The image of the code isn't going to help us help you  :-)
    You really need to either post the code live, including the css or (the preferred option), to upload the files to a server and provide a link.  It's the only way people can see the page and the underling code and css in order to help you troubleshoot the problem.
    Posting code in this forum
    Nadia
    Adobe Community Expert : Dreamweaver
    Unique CSS Templates | Tutorials | SEO Articles
    http://www.DreamweaverResources.com
    Web Design & Development
    http://www.perrelink.com.au
    http://twitter.com/nadiap

  • How to I make pop up windows go back to the left side of the screen when they are moving to the right?

    Whenever I click on a link, a new window pops up. That's good, that's what I wanted. They've always opened on the left side of the screen. However, they are now opening in the middle of the screen. This has happened before and the screen eventually opened completely on the right. Last time this happened, I ended up having to delete something. I don't remember what, but it solved the issue. Please help!

    You can check for problems caused by a corrupted localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf
    You can also try to emove the Firefox plist file (org.mozilla.firefox.plist).
    *http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results
    Go to "~/Library/Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist)

  • New tab "+" button moved to the right edge; how to move it back?

    It used to be (like yesterday) that when I had a number of tabs open, the "mini-tab" "+" (new tab) button would be to the right of the last tab. Now, suddenly, it's all the way towards the right edge of the browser window, regardless of how many tabs are open. If there are a small number of tabs open, there is unused space (where more tabs would go).
    Okay -- so I'm change adverse -- how do I move the new tab "+" button over to the end of the list of tabs?
    Thanks.

    Although the "+" appears on the far right end of the bar when you are in Customize mode, it should slide over next to the last tab once you close out of Customize.
    If it doesn't, I wonder whether something else could be in between, such as an old "flexible space" control? (These are no longer in the Customize dialog as an option, but I don't know whether old ones were removed.)
    Following the old principle of turning it off and back on again, could you move the "+" to the main toolbar and exit Customize to save that, then go back into Customize and move it to the tab bar again, to see whether Firefox takes the hint?
    ''Edit: Forgot to include this link: [[Customize Firefox controls, buttons and toolbars]]''

  • Working on document and it moved to the right of screen and disappeared.  how to i retrieve it?

    ?working on document and itmoved to the right OFF THE SCREEN and disappeared.  how doi retireve it?

    Two finger swipe back or
    File > Open Recent

Maybe you are looking for

  • Files and folders moved to NAS become read only.

    I just got an Iomega NAS. When I move files and folders to it from my Macbook, they become read only when they get there. Files from my girlfriend's PC stay read/write when they are moved to the NAS. I first noticed this with iTunes. I changed the lo

  • Calculation of Excise Duty & Purchase related taxes

    Hi I have a scenario in which we need to calculate the Excise duty on the full basic price and then take some cash discount. Other than excise duty, all the other input taxes like VAT, CST,LST should be calculated on the net amount. The cash discount

  • Having trouble downloading digital version of movies from the cloud to my mac.

    Keep getting a error = -50 or error = - 1309. Have deleted the previously failed download attempts, but get the same error message when I try again. Can anyone advise on what I'm doing wrong as I have never had this problem in the past?

  • Trouble Burning in iTunes

    Hi All: I am having problems when burning a disc in iTunes. I get a message stating that this or a number of songs cannot be burned unless the computer is authorized thru Mac. The authorization IS turned on. The discs were imported under Apple LossLe

  • WebUtil enabled form just exits giving ORA-0000.

    We WebUtil enabled a form and deployed in Linux. The form is to read an Excel sheet data from the client machine. Forms is 10g R2. When we run the form we get an ORA-0000 and for is exited. It does not even go to the WHEN-NEW-FORM-INSTANCE code. A no