Muddy looking graphic in Sequence Monitor

Can anyone tell me what I am doing wrong? I have an mpeg2 imported with a PNG graphic from LiveText embedded in the file and it looks muddy when imported into Premiere. The image on the left shows a section of the clip in VLC Player, which looks great. On the right, is a snapshot of the same clip in the Sequence Monitor in Premiere.

Hi TR1988,
TR1988 wrote:
I did notice when I imported a png directly into the Premiere timeline, it also looks smeary. However once I export the file, it looks fine. Perhaps my current situation will resolve itself once I render out that file.
I'm sorry you're having trouble. I created a PNG from Photoshop and it looked good in the Source Monitor. Can you use Photoshop?
Here's my example, the black box is a matte.
Thanks,
Kevin

Similar Messages

Displaying custom UI elements on timeline in Sequence Monitor

Is it possible to display custom UI elements in the region highlighted in red?
I'm looking for a way to highlight certain frames in the Sequence Monitor in Premiere Pro. For example imagine my plugin made some changes in frame 10, 16, 20. I'd like to highlight those frames on the timeline so the user can find them easily.
Is this possible?
Many thanks

Ann's right, markers are the way to go.
Yoshi, you're referencing the C++ plug-in SDK; the HTML5 panel SDK supports adding and manipulating markers. Here's the sample panel (which, conveniently, adds and manipulates markers):
https://github.com/Adobe-CEP/Samples/tree/master/PProPanel
Here's how to set up a panel development environment:
https://github.com/Adobe-CEP/Samples/blob/master/PProPanel/payloads/PPro_Panel_QuickStart_ Guide.pdf
Feel free to ask me anything; here, if the topic is of general interest, or directly at [b b b at adobe dot com] if it's proprietary.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

WS-RM sequences not visible in SOAMANAGER Sequence monitoring

Hello
What i need to know is why I cant see any WS-RM sequences in SOAMANAGER>Sequence Monitoring. Please note:
- I can see the asynchronouse messages in the XML monitor (srt_tools >> Monitor for Processed XML , or SXMB_moni)
- I can see the sequences on the receiver side ( NW CE 7.3 SP2)
- I can see the messages if I put a payload trace on the users that triggers the call ( in srt_util)
- I have this problem only in the production system,. In dev, quality and sandbox I can see the sequences on both sender and reciever side.
- The systems are identical is terms of SP's.
Any Ideas?
Regards
A

Hi Adam,
I don't know of a report that may be removing them but some other suggestions:
- Check if you have the necessary authorizations for monitoring in production (e.g. authorization object S_BGRFC). Maybe do an authorization comparison check with what you have in Dev & Quality.
- I actually think that you may need to up the trace/log level in production to view these sequence messages. For better performance in Production, these levels are normally set to the lowest level (errors only), see URL below for guidance:
[http://help.sap.com/saphelp_nw70/helpdata/en/46/ee28b0837d3c1de10000000a155369/frameset.htm]
Do a comparison with Dev & QA for the log/trace settings there.
Regards, Trevor
Edited by: Trevor Naidoo on Jul 14, 2011 10:48 AM

Soa management Monitoring ...Display Sequences monitoring

Hello all
What is the previous configuration in order to see the the messages of the web service sequence monitor of the SOA MANAGER .
I was able to consume a webservice via proxy in a same machine and now I want to see the sequence monitor the sequence monitoring ?
How do I have to proceed ?
Thank u for any reply..

A management pack generally refers to the set of pages in EM Grid/Cloud Control which provide functionality for a given set of target types. Since EM Grid Control 11g, the ADP functionality has been part of the Grid Control release and the pages licensed via the Management Pack Plus for SOA or the SOA Management Pack EE.
To populate the ADP pages with data, additional steps must be performed in order to deploy an ADP manager and ADP agents. Doing this is optional, depending on whether or not you require the additional capability that those pages provide.
ADP data, however, are collected and stored separately from the core GC/CC metrics and are not related to the monitoring template functionality.

Graphics going bad -- Monitor or graphics card failure?

My graphics are starting to go haywire. It came on sort of gradually. The screen is all pixelated, and it's dominated by red pixels.
My sense is that it's a hardware failure, not a software problem. But how can I determine if it's the monitor, or the graphics card?
The monitor is not an Apple -- it's a Dell. And I don't have a spare, or I would just plug in another monitor.
The computer is a 2-year old Mac Pro, with an Nvidia graphics card.
Any help?
thanks,
Mike

99% sure it's probably the card. At least that's the way for me anyway.
As @X423424 said, at least try to reseat the card and don't forget to unplug and replugin the video cable also.
Take the cover off the side and look to see if the video card fan is spinning or if it's completely packed with dust. If it's clogged with dust or the fan died then you have a 40/60 chance it will be fine once the fan works again.
If you know anyone with a computer, Mac/Windows, ask if you can check out the monitor before spending any hard earned cash on a new card, eh?

Looking for a replacement monitor?

My original 17" Apple Studio Display is going bad and needs replacing. I have both DVI & ADC ports on the back of my G5.
Can I use any LCD with a DVI input? Samsung's website shows connecting to a mac using a D-sub connection? I was hoping to plug & play using DVI to DVI?
I am looking at a Samsung, NEC, or Viewsonic widescreen in 20" or 22". Any recommendations for a seamless transition?
Thanks!

Hi-
Can I use any LCD with a DVI input?
With no greater than 1920x1200 optimal resolution, Yes.
The three listed makers are all reported favorably by Mac users, and are all plug and play to the DVI port on your graphics card.
Add Acer to your list of possibilities- very nice, economical monitors.

Importing .asf files, blurry in source/sequence monitors and output

I have a large amount of material to work with in .asf form, 480x360 resolution. I'll be outputting to 480x360 as well, so no scaling/zooming needed at all. Problem is, when I import one of those asfs it immediately becomes blurry, i.e. in the source monitor even before I insert it into the sequence and do any modifications. Comparing the imported files to the originals there is a noticeable difference at the exact same dimensions.
I've made sure my sequence settings are at 480x360 resolution. Not sure where else to look on this, any suggestions?
In the past I've done a very similar workflow in PE with no problems, so I'm assuming (hoping??) that there's some easily changed option. Thanks in advance.

Have tried various other permutations in project setup and output - still no luck.
I'm wondering if a clue is the behavior of the program monitor - the clip displays clearly in it until I 'select' the video screen, at which point it blurs just like the output. If I click another area of the screen again, the image resharpens, and so forth. Anyone know what mechanism is causing that?

Graphics performance - external monitor

Hello everybody.
I've run into a problem..
When I add an external monitor to my rMBP 15", the graphics performance is reduced by quite a bit. Example: when I play League of Legends on my built in monitor, it runs smoothly at 60fps with almost the highest graphic settings. But when I play it on the external monitor, with the lid closed, it's going at 30fps with the lowest graphic settings.
Here's the twist..
I bootcamped it, just to test if there'd be any difference. And surely, there was. Suddenly I could play with the highest graphic settings at 60fps on my external monitor.
Here's my setup:
MacBook Pro Retina 15", mid 2012.
Asus VE278Q
The monitor is connected with a HDMI cable.

I have the same hardware, a rMBP with the quad 2.6, 16 gigs of ram and the NVidia 650. I don't have the problems you are describing but I play different games - mostly borderlands, so perhaps that makes a difference.
The first thing I would suggest is to use something other than an HDMI cable. I can't remember the details but I recall reading that the throughput of the HDMI is limited, especially compared to thunderbolt, so I would try switching first. Of course you are roughly quadripling the pixels you are pushing when you go from 1440x900 (native retina) to 2880x1800 .... so that could be it, and I would also try to scale the external monitor 1440x900 ... and see what happens.
Lastly, most games run a lot faster under windows than OSX. Sad but true. I sometimes run the same game on my server ( a proliant with a Xeon quad @ 3.3 ghz with either a decidedly low end GT630 video card. It smokes the retina MBP, badly for whichever game I have ever tried. They look better, they run much faster. That said, I still like to game on the Mac and only use the Server when I need a third machine when my daughter comes to kick my butt. I personally will take the ease and elegance over the speed, since the rMBP is fast enough.

NWBC Reporting (Graphical View) Sequence of steps to activate.

Hi,
I am currently trying to configure NWBC reporting section in MDG6.1. It looks like Processing Time (List View) and Status Report Works fine but not Processing Time (Graphical View) which I uderstand BI Xcelsius dashboards. Currently when I click on Graphical View link, It goes to a page showing a button Change Lauchpad and a link under it as Processing Time. When I click Processing Time..it says Service not reachable.
I understand BI client not setup properly to link from dev system. I asked basis team to setup a BI client but I am not sure exact sequence to be followed here.. I search through SCN and did not find correct sequence.
Can anyone point me the right sequence to setup graphical view reporting? and the SAP Notes to refer on each sequense etc.
Thanks
Praveen

Hi Praveen,
Please go through the document Activating BI Content for Analysis of Change Re... | SCN this is the good document which talks in detail about the BI content setup.
Best regards,
Girish

Looking for a new monitor...

Hey,
I know this isn't exactly directly Photoshop related, but I'm not sure where else to ask.
I'm a graphic design student and I have recently realized that my monitor is absolutely HORRIBLE for this field.
http://accessories.us.dell.com/sna/products/Displays/productdetail.aspx?c=us&l=en&s=dhs&cs =19&sku=320-6523
I'm looking for a new one. Since I'm a poor college kid :(, something around the $300 price range would be ideal.
If you know of a good one that fits this general price range, please let me know.
Thanks!
-Jeff

That happens to be an excellent monitor. If you're having issues it may
be that you need to calibrate it.
I can assure you that you won't find anything better for $300.
Bob

Installed Geforce GTX 650 graphics card, but monitors won't turn on

I have installed a geforce gtx 650 graphics card in my hp pavilion and a corsair hx750 power supply, but after installing it and trying to get it to work the monitor won't detect any signal from the dvi plugs. I've tried looking up the problem before, and I think it is because the hp pavilion is an AMD, so it is locking out any new hardware in the computer, but after uninstalling everything and putting the original power supply back in, the monitors still won't get signal. I don't know if I might have broke something while trying to hook up the power supply or graphics card, but i figured someone else could figure out the problem.

Hi,
Please post the HP product number for your PC. How to Find the HP Model Number and the HP Product Number or let HP automatically find your PC model number and HP network attached printers.
Monitor or monitors? Title indicates monitors.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Looking to buy new monitors - any advice?

I am looking for advice on purhchasing new LCD monitors. I have about £1200 ($1750) for either two monitors (20inch) or one big one (30inch) I want to be able to use the same monitor/s to edit on and for full screen playback of sequences.
I will mainly be working with XDCAM HD EX and DvcPro HD so I would like a monitor that can work nicely with that resolution and also be able to do some grading on. I know a grade1 CRT is the best option for this, but my pockets arn't that deep sadly.
I'm not too technical so I would like to know what I should look for in terms of response time, contrast range and resolution, also are Look Up Tables something I should be looking out for? I find my current googling to be confusing, but so far I have narrowed it down to a few manufacturers. EIZO, NEC and DELL.
Does anyone have experience of these monitors or other recommendations?
Many thanks in advance.
Keith.

On the other hand I used 2 monitors for years . . literally going back to my IIfx days.
However I recently had the opportunity to try out a system with a single 30 and was impressed enough with it for ease of use that I have since switched over to a single monitor set up. I also reasoned that if I ever need more screen real estate I could add another monitor back into the setup. Personally I think the Apple 30 inch is the best of the bunch in your price range.
So there you are I have added to the indecision !
As far as monitoring goes, sure we'd all go out and buy top of the line broadcast kit if our budgets allowed. I did as many do now used to use a good quality CRT TV until I could afford to go pro . . yes there will be lots of head shaking from some ADG members but you will at least have a guide as to how your finished product will look with regards to overscan and TV colour palette.

Photos Look Blurry on NTSC monitor when played from timeline

When I play back jpeg photos from my timeline on my monitor, the pictures look a bit blurry, especially right at the end of my transition, such as a cross dissolve...When I stop the playhead on a jpeg, after about 1 second, the image becomes very sharp on the monitor...once I start playing again, the image becomes a bit blurry!

Dave,
On both my G4 and G5, I've encountered the same problem from time to time and here's the workaround that fixed it for me:
Apply a filter to the images. I use the 3-Way Color Corrector since many of the photos could stand a little tweaking for TV anyway. Render them and they should retain their original sharpness.
I have no idea what causes the problem, why it only affects some of the images and not all of them, nor do I know why re-rendering them after applying a filter works ... but it does for me.
-DH
ps: another symptom that this fix takes care of is when you see a small shift (1 or 2 pixels) in the image's position as it comes out of a transition.

Snow Blizzard looks like "Eyes" on monitor.

Hi, I'm hoping someone can help. I'm new to Motion and am working on a project with the Snow Blizzard, Particle Emitter. On the computer monitor the effect works fine and appears as I have hoped. However, when I export the clip to a quicktime movie and bring it into Final Cut it looks like 2 eyes traversing the screen (kind of like the funny ones you've seen in cartoons in no light scenes).
The scene I'm creating is white text on a black background with the snow falling around. The monitor is NTSC, I am using a G5 dual with an Aja IO connection. I'm hoping to have this look like snow when I make this as a DVD and not eyes, is there someone who has experienced this and can help? Thanks!
Peter

Ok, I was able to answer this one myself. When I was creating the snow, the snow flakes were falling faster than they could draw on on a monitor. It worked on the computer because it was HD but on progressive scan monitors it can't draw quickly enough. So I slowed down the snowflakes as they fell. When I did this I needed to increase the life of the flakes as well, since they fell slower they died faster. This solved my problem.

Muddy looking graphic in Sequence Monitor

Similar Messages

Maybe you are looking for