Muffled and static speakers (oreo issue!)
I recently got an iphone 4s and all worked fine... unfortunatley in a very long story my iphone ended up with the cremey oreo centre a little msuhed into and im guessing through the mesh of the bottom speakers! They are now muffled and im not sure whats wrong. I am guessing the oreo is in the speakers and messing up the virbrations but i dont know how to fix it? I was wondering is there a way to open it up to remove an oreo to sort it out?
Thanks!
I am running XP and have same problem. Sound now gone after "pop". Customer services suggests hardware failure and send back to factory. Flashing BIOS and updating IDT audio driver will not fix the problem.
Possible speaker failure or audio chip failure.
Similar Messages
-
I am having issues with my new 2540P. I can hear faint sound and static coming from my speakers as well as my headphones when I plug into the jack. I first started having this issue when I plugged additional speakers into the jack and USB while talking on Skype..
I am running Win7. I tried troubleshooting drivers and hardware, disabling and enabling, and a system restore going back one day...but no luck. When I disable the speakers, I stopped hearing even the faint sound. I also tried plugging and unplugging the jack 20 times.
Is it possible that this is a hardware failure (jack and/or sound card)?
Does anyone have other suggestions?I am running XP and have same problem. Sound now gone after "pop". Customer services suggests hardware failure and send back to factory. Flashing BIOS and updating IDT audio driver will not fix the problem.
Possible speaker failure or audio chip failure. -
Dynamic PAT and Static NAT issue ASA 5515
Hi All,
Recently we migrated our network to ASA 5515, since we had configured nat pool overload on our existing router the users are able to translated their ip's outside. Right now my issue was when I use the existing NAT configured to our router into firewall, it seems that the translation was not successful actually I used Dynamic NAT. When I use the Dynamic PAT(Hide) all users are able to translated to the said public IP's. I know that PAT is Port address translation but when I use static nat for specific server. The Static NAT was not able to translated. Can anyone explain if there's any conflict whit PAT to Static NAT? I appriciate their response. Thanks!
- BhalHi,
I would have to guess that you Dynamic PAT was perhaps configured as a Section 1 rule and Static NAT configured as Section 2 rule which would mean that the Dynamic PAT rule would always override the Static NAT for the said host.
The very basic configured for Static NAT and Default PAT I would do in the following way
object network STATIC
host
nat (inside,outside) static dns
object-group network DEFAULT-PAT-SOURCE
network-object
nat (inside,outside) after-auto source dynamic DEFAULT-PAT-SOURCE interface
The Static NAT would be configured as Network Object NAT (Section 2) and the Default PAT would be configured with Twice NAT / Manual NAT (after-auto specifies it as Section 3 rule)
This might sound confusing. Though it would be easier to say what the problem is if we saw the actual NAT configuration. Though I gave the reason that I think is probably one of the most likely reasons if there is some conflict with the 2 NAT rules
You can also check out a NAT document I made regarding the new NAT configuration format and its operation.
https://supportforums.cisco.com/docs/DOC-31116
Hope this helps
- Jouni -
IOS 4.2.1: Intermittent Playback and Static Issue Resolution - JVC KD-AVX77
Hey guys, it appears that iOS 4.2.1 fixes the issue with the intermittent playback and static issues that I was having in my car. I just played two songs continuously with no issues.
I have the JVC KD-AVX77, and with iOS 4.1, I was having nothing but problems with music playback. It had got to the point that it was intolerable to use my iPhone in my car.
I am extremely pleased that it seems like Apple took everyone's feedback about this issue, and came up with a fix to it. Too bad that I've already stored my car for the winter.
Please post your own findings. I know this issue was across multiple head units and car manufacturers.
Message was edited by: Ack_Same problem here. I have a 3gs and this intermitent static/hiss/lag happens when i connect through the usb on my toyota prius. This problem did not happen before the latest software upgrade. I have switched out the cables. Also tested on an ipod touch without the software upgrade and had no problem. It's a crazy annoying problem! Sounds a bit like listening to vinyl. I have also tried switching to airplane mode, but that didn't do anything. I have also reset the iphone while connected to the usb (the same way i frequently have to because of an earlier problem i've had with the usb failing to work in the car at all...) and that has not fixed it. I'm going to try connecting via bluetooth today and see what happens - i'm guessing that will be fine, but i don't like to listen via bluetooth.
-
I have had my I have had my iPhone 5c for a little over a month and people can never hear me during calls, like I'm in a tunnel or muffled! I googled this issue and several others have had this problem as well. What can I do to get help?
Take it in to an Apple store or authorized service center for evaluation and possible replacement.
-
I have checked my internal speakers on an iMac and also the external speakers - all working. When play music in iTunes the sound bar moves but no sound is heard. Same problem if I want to listen to the radio via internet. Has anyone a suggestion. Is it a Yosemite issue - I have had others involving printers. thanks
like davis says then even though I have connected headset and external speakers to my imac then at boot up the boot sound comes out of the imac speaker
but once booted into OS X all audio is played out of the headset and ext speakers and the imac speakers are silent as the grave -
Audio port and internal speakers issue
My audio port and internal speakers are not working when playing and/or streaming audio. I'm assuming it's a software issue considering it has happened straight after downloading OS X.
Any, simplified and jargon-free advice, would be very appreciated. Need music for my hours of coursework/essay writing ahead of me.
Many thanks for any help
AndyIt often is helpful to know what EXACT model MBP one is dealing with.
What works or does not work under what conditions? Internal speakers, earphones?
Have you opened System Preferences>Sound and checked the settings?
Ciao. -
Overclock past 3315Mhz and static comes out speakers
i overclocked my processor to 3406Mhz, i new it could go that speed because i had done it before, but i was listening to music at the same time. when it got to 3406Mhz the music stoped and static replaced it.
i quickly set it to it's orignial speed. i then slowly increased to the speed, with the music playing, and found out that this only happened when it got passed 3315Mhz.
i tried overclocking the CPU first at 3406Mhz then clicked play but instead of static comming out my speakers my computer reset itself
can anyone suggest why it does this and tell me how to solve it.
thanksPossibly the CPU - at those settings it becomes sensitive to EMI (Electro-Magnetic Interference). I know that when I have another energy source going as I'm bumping my 64 on the up - i.e., home stereo cranking, I have difficulties maintaining or reaching previously attainable settings.
-
IPhone 6 Blue Screen and Static noise?
So basically, here's the gist. I recently (not really recently, around October/November 2014) got an iPhone 6. I had gone straight from the 4 to the 6 so I haven't adjusted to it not being able to fit in my back pocket like my 4 did, resulting in it falling out of my pocket and landing on concrete, cracking a lot of the screen. Now, I'm fine with cracks so long as it only messes with the appearance of my phone. Meaning if it functions normally I see no need in getting it fixed. It functioned perfectly fine the following months until maybe mid-Decemberish where this happened for the first time. I was on Instagram trying to view a video. The "buffering video" symbol disappeared from the upper right hand corner signaling the video had started but I was still staring at the same thumbnail image. Thinking maybe it was a rip off video I decided to try and view another video. The same thing happened. As well as another time with one of my own videos. So this third time it happened the video began to play but then froze, but no pause or stop button appeared as usual. Instead my phone went to a blue screen, and static was heard coming from the speakers very faintly. It then went black and rebooted, taking me to the home screen. I looked into this issue and was told it was probably just a software problem and wouldn't happen again. Since then I have been experiencing bugs such as my screen lagging or simply not responsing to my touch, apps crashing the moment I open them, and my camera acting up, but it never went blue, though Instagram videos still refused to play. Until just now. Once again I was attempting to watch an Instagram videa that started to play but stopped mid-video and the screen went blue again with the same static then back to black and proceeded to reboot. By now I've decided to seek professional help which led me here to this forum. Any help? Thank you.
Today was second time I got my phone back without Apple Premium Service Provider found anything wrong. I get "blue screen of death" all the time. I have even tried to create a new Apple id but I got the "blue screen of death" directly when i tried to install any apps.
I now have an expensive worthless iPhone 6 that I can't use and Apple says it's nothing wrong with that. I'm going to throw this piece of **** in the garbage and buy a Samsung instead because I need a phone that works and that I can rely on.
Thanks for nothing,
A former satisfied and loyal customer -
MS NLB with ASA and Static NAT from PUP to NLB IP
Hi all,
I am trying to get MS NLB up and running. It is almost all working. Below is my physical setup.
ASA 5510 > Cat 3750X >2x ESXi 5.1 Hosts > vSwitch > Windows 2012 NLB Guest VMs.
I have two VMs runing on two different ESXi hosts. They have two vNICs. One for managment and one for inside puplic subnet. The inside puplic subnet NICs are in the NLB cluster. The inside public subnet is NATed on the ASA to a outide public IP.
192.168.0.50 is the 1st VM
192.168.0.51 is the 2nd VM
192.168.0.52 is the cluster IP for heartbeat
192.168.0.53 is the cluster IP for NLB traffic.
0100.5e7f.0035 is the cluster MAC.
The NLB cluster is using MULTICAST
I have read the doumentation for both the ASA and CAT switch for adding a static ARP using the NLB IP and NLB MAC.
For the ASA I found
http://www.cisco.com/en/US/docs/security/asa/asa84/asdm64/configuration_guide/mode_fw.html#wp1226249
ASDM
Configuration > Device Management > Advanced > ARP > ARP Static Table
I was able to add my stic ARP just fine.
However, the next step was to enable ARP inspection.
Configuration > Device Management > Advanced > ARP > ARP Inspection
My ASDM does not list ARP Inspection, only has the ARP Static Table area. Not sure about this.
For the CAT Switch I found
http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_example09186a0080a07203.shtml
I added the both the ARP and Static MAC. For the static MAC I used the VLAN ID of the inside public subnet and the interfaces connected to both ESXi hosts.
On the ASA I added a static NAT for my outside Public IP to my inside pupblic NLB IP and vise versa. I then added a DNS entry for our domain to point to the outside public IP. I also added it to the public servers section allowing all IP traffic testing puproses.
At any rate the MS NLB is working ok. I can ping both the Public IP and the Inside NLB IP just fine from the outside. (I can ping the inside NLB IP becuase I'm on a VPN with access to my inside subnets) The problem is when I go to access a webpade from my NLB servers using the DNS or the Public IP I get a "This Page Can't Be Displyed" messgae. Now while on the VPN if I use the same URL but insied use the NLB IP and not the Public IP it works fine.
So I think there is soemthing wrong with the NATing of the Public to NLB IP even tho I can ping it fine. Below is my ASA Config. I have bolded the parts of Interest.
Result of the command: "show run"
: Saved
ASA Version 8.4(4)9
hostname MP-ASA-1
enable password ac3wyUYtitklff6l encrypted
passwd ac3wyUYtitklff6l encrypted
names
dns-guard
interface Ethernet0/0
nameif outside
security-level 0
ip address 198.XX.XX.82 255.255.255.240
interface Ethernet0/1
description Root Inside Interface No Vlan
speed 1000
duplex full
nameif Port-1-GI-Inside-Native
security-level 100
ip address 10.1.1.1 255.255.255.0
interface Ethernet0/1.2
description Managment LAN 1 for Inside Networks
vlan 2
nameif MGMT-1
security-level 100
ip address 192.168.180.1 255.255.255.0
interface Ethernet0/1.3
description Managment LAN 2 for Inside Networks
vlan 3
nameif MGMT-2
security-level 100
ip address 192.168.181.1 255.255.255.0
interface Ethernet0/1.100
description Development Pubilc Network 1
vlan 100
nameif DEV-PUB-1
security-level 50
ip address 192.168.0.1 255.255.255.0
interface Ethernet0/1.101
description Development Pubilc Network 2
vlan 101
nameif DEV-PUB-2
security-level 50
ip address 192.168.2.1 255.255.255.0
interface Ethernet0/1.102
description Suncor Pubilc Network 1
vlan 102
nameif SUNCOR-PUB-1
security-level 49
ip address 192.168.3.1 255.255.255.0
interface Ethernet0/1.103
description Suncor Pubilc Network 2
vlan 103
nameif SUNCOR-PUB-2
security-level 49
ip address 192.168.4.1 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
boot system disk0:/asa844-9-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network Inside-Native-Network-PNAT
subnet 10.1.1.0 255.255.255.0
description Root Inisde Native Interface Network with PNAT
object network ASA-Outside-IP
host 198.XX.XX.82
description The primary IP of the ASA
object network Inside-Native-Network
subnet 10.1.1.0 255.255.255.0
description Root Inisde Native Interface Network
object network VPN-POOL-PNAT
subnet 192.168.100.0 255.255.255.0
description VPN Pool NAT for Inside
object network DEV-PUP-1-Network
subnet 192.168.0.0 255.255.255.0
description DEV-PUP-1 Network
object network DEV-PUP-2-Network
subnet 192.168.2.0 255.255.255.0
description DEV-PUP-2 Network
object network MGMT-1-Network
subnet 192.168.180.0 255.255.255.0
description MGMT-1 Network
object network MGMT-2-Network
subnet 192.168.181.0 255.255.255.0
description MGMT-2 Network
object network SUNCOR-PUP-1-Network
subnet 192.168.3.0 255.255.255.0
description SUNCOR-PUP-1 Network
object network SUNCOR-PUP-2-Network
subnet 192.168.4.0 255.255.255.0
description SUNCOR-PUP-2 Network
object network DEV-PUB-1-Network-PNAT
subnet 192.168.0.0 255.255.255.0
description DEV-PUB-1-Network with PNAT
object network DEV-PUB-2-Network-PNAT
subnet 192.168.2.0 255.255.255.0
description DEV-PUB-2-Network with PNAT
object network MGMT-1-Network-PNAT
subnet 192.168.180.0 255.255.255.0
description MGMT-1-Network with PNAT
object network MGMT-2-Network-PNAT
subnet 192.168.181.0 255.255.255.0
description MGMT-2-Network with PNAT
object network SUNCOR-PUB-1-Network-PNAT
subnet 192.168.3.0 255.255.255.0
description SUNCOR-PUB-1-Network with PNAT
object network SUNCOR-PUB-2-Network-PNAT
subnet 192.168.4.0 255.255.255.0
description SUNCOR-PUB-2-Network with PNAT
object network DEV-APP-1-PUB
host 198.XX.XX.XX
description DEV-APP-2 Public Server IP
object network DEV-APP-2-SNAT
host 192.168.2.120
description DEV-APP-2 Server with SNAT
object network DEV-APP-2-PUB
host 198.XX.XX.XX
description DEV-APP-2 Public Server IP
object network DEV-SQL-1
host 192.168.0.110
description DEV-SQL-1 Inside Server IP
object network DEV-SQL-2
host 192.168.2.110
description DEV-SQL-2 Inside Server IP
object network SUCNOR-APP-1-PUB
host 198.XX.XX.XX
description SUNCOR-APP-1 Public Server IP
object network SUNCOR-APP-2-SNAT
host 192.168.4.120
description SUNCOR-APP-2 Server with SNAT
object network SUNCOR-APP-2-PUB
host 198.XX.XX.XX
description DEV-APP-2 Public Server IP
object network SUNCOR-SQL-1
host 192.168.3.110
description SUNCOR-SQL-1 Inside Server IP
object network SUNCOR-SQL-2
host 192.168.4.110
description SUNCOR-SQL-2 Inside Server IP
object network DEV-APP-1-SNAT
host 192.168.0.120
description DEV-APP-1 Network with SNAT
object network SUNCOR-APP-1-SNAT
host 192.168.3.120
description SUNCOR-APP-1 Network with SNAT
object network PDX-LAN
subnet 192.168.1.0 255.255.255.0
description PDX-LAN for S2S VPN
object network PDX-Sonicwall
host XX.XX.XX.XX
object network LOGI-NLB--SNAT
host 192.168.0.53
description Logi NLB with SNAT
object network LOGI-PUP-IP
host 198.XX.XX.87
description Public IP of LOGI server for NLB
object network LOGI-NLB-IP
host 192.168.0.53
description LOGI NLB IP
object network LOGI-PUP-SNAT-NLB
host 198.XX.XX.87
description LOGI Pup with SNAT to NLB
object-group network vpn-inside
description All inside accessible networks
object-group network VPN-Inside-Networks
description All Inside Nets for Remote VPN Access
network-object object Inside-Native-Network
network-object object DEV-PUP-1-Network
network-object object DEV-PUP-2-Network
network-object object MGMT-1-Network
network-object object MGMT-2-Network
network-object object SUNCOR-PUP-1-Network
network-object object SUNCOR-PUP-2-Network
access-list acl-vpnclinet extended permit ip object-group VPN-Inside-Networks any
access-list outside_access_out remark Block ping to out networks
access-list outside_access_out extended deny icmp any any inactive
access-list outside_access_out remark Allow all traffic from inside to outside networks
access-list outside_access_out extended permit ip any any
access-list outside_access extended permit ip any object LOGI-NLB--SNAT
access-list outside_access extended permit ip any object SUNCOR-APP-2-SNAT
access-list outside_access extended permit ip any object SUNCOR-APP-1-SNAT
access-list outside_access extended permit ip any object DEV-APP-2-SNAT
access-list outside_access extended permit ip any object DEV-APP-1-SNAT
access-list outside_cryptomap extended permit ip object-group VPN-Inside-Networks object PDX-LAN
pager lines 24
logging asdm informational
mtu outside 1500
mtu Port-1-GI-Inside-Native 1500
mtu MGMT-1 1500
mtu MGMT-2 1500
mtu DEV-PUB-1 1500
mtu DEV-PUB-2 1500
mtu SUNCOR-PUB-1 1500
mtu SUNCOR-PUB-2 1500
mtu management 1500
ip local pool Remote-VPN-Pool 192.168.100.1-192.168.100.20 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any outside
icmp permit any Port-1-GI-Inside-Native
icmp permit any MGMT-1
icmp permit any MGMT-2
icmp permit any DEV-PUB-1
icmp permit any DEV-PUB-2
icmp permit any SUNCOR-PUB-1
icmp permit any SUNCOR-PUB-2
asdm image disk0:/asdm-649-103.bin
no asdm history enable
arp DEV-PUB-1 192.168.0.53 0100.5e7f.0035 alias
arp timeout 14400
no arp permit-nonconnected
nat (Port-1-GI-Inside-Native,outside) source static any any destination static VPN-POOL-PNAT VPN-POOL-PNAT
nat (DEV-PUB-1,outside) source static any any destination static VPN-POOL-PNAT VPN-POOL-PNAT
nat (DEV-PUB-2,outside) source static any any destination static VPN-POOL-PNAT VPN-POOL-PNAT
nat (MGMT-1,outside) source static any any destination static VPN-POOL-PNAT VPN-POOL-PNAT
nat (MGMT-2,outside) source static any any destination static VPN-POOL-PNAT VPN-POOL-PNAT
nat (SUNCOR-PUB-1,outside) source static any any destination static VPN-POOL-PNAT VPN-POOL-PNAT
nat (SUNCOR-PUB-2,outside) source static any any destination static VPN-POOL-PNAT VPN-POOL-PNAT
nat (DEV-PUB-1,outside) source static DEV-PUP-1-Network DEV-PUP-1-Network destination static PDX-LAN PDX-LAN no-proxy-arp route-lookup
nat (DEV-PUB-2,outside) source static DEV-PUP-2-Network DEV-PUP-2-Network destination static PDX-LAN PDX-LAN no-proxy-arp route-lookup
nat (MGMT-1,outside) source static MGMT-1-Network MGMT-1-Network destination static PDX-LAN PDX-LAN no-proxy-arp route-lookup
nat (MGMT-2,outside) source static MGMT-2-Network MGMT-2-Network destination static PDX-LAN PDX-LAN no-proxy-arp route-lookup
nat (Port-1-GI-Inside-Native,outside) source static Inside-Native-Network Inside-Native-Network destination static PDX-LAN PDX-LAN no-proxy-arp route-lookup
nat (SUNCOR-PUB-1,outside) source static SUNCOR-PUP-1-Network SUNCOR-PUP-1-Network destination static PDX-LAN PDX-LAN no-proxy-arp route-lookup
nat (SUNCOR-PUB-2,outside) source static SUNCOR-PUP-2-Network SUNCOR-PUP-2-Network destination static PDX-LAN PDX-LAN no-proxy-arp route-lookup
object network Inside-Native-Network-PNAT
nat (Port-1-GI-Inside-Native,outside) dynamic interface
object network VPN-POOL-PNAT
nat (Port-1-GI-Inside-Native,outside) dynamic interface
object network DEV-PUB-1-Network-PNAT
nat (DEV-PUB-1,outside) dynamic interface
object network DEV-PUB-2-Network-PNAT
nat (DEV-PUB-2,outside) dynamic interface
object network MGMT-1-Network-PNAT
nat (MGMT-1,outside) dynamic interface
object network MGMT-2-Network-PNAT
nat (MGMT-2,outside) dynamic interface
object network SUNCOR-PUB-1-Network-PNAT
nat (SUNCOR-PUB-1,outside) dynamic interface
object network SUNCOR-PUB-2-Network-PNAT
nat (SUNCOR-PUB-2,outside) dynamic interface
object network DEV-APP-2-SNAT
nat (DEV-PUB-2,outside) static DEV-APP-2-PUB
object network SUNCOR-APP-2-SNAT
nat (SUNCOR-PUB-2,outside) static SUNCOR-APP-2-PUB
object network DEV-APP-1-SNAT
nat (DEV-PUB-1,outside) static DEV-APP-1-PUB
object network SUNCOR-APP-1-SNAT
nat (SUNCOR-PUB-1,outside) static SUCNOR-APP-1-PUB
object network LOGI-NLB--SNAT
nat (DEV-PUB-1,outside) static LOGI-PUP-IP
object network LOGI-PUP-SNAT-NLB
nat (outside,DEV-PUB-1) static LOGI-NLB-IP
access-group outside_access in interface outside
access-group outside_access_out out interface outside
route outside 0.0.0.0 0.0.0.0 198.145.120.81 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 192.168.1.0 255.255.255.0 outside
http 10.1.1.0 255.255.255.0 Port-1-GI-Inside-Native
http 192.168.180.0 255.255.255.0 MGMT-1
http 192.168.100.0 255.255.255.0 Port-1-GI-Inside-Native
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect icmp error
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:d6f9f8e2113dc03cede9f2454dba029b
: end
Any help would be great! I think the issue is in teh NAT as I am able to access NLB IP from the outside and could not do that before adding the Static ARP stuff.
Thanks,
ChrisAlso If I change to NAT from the public IP to the NLB IP to use either one of the phsyical IPs of the NLB cluster (192.168.0.50 or 51) it works fine when using the public IP. So it's definatly an issue when NATing the VIP of NLB cluster.
Chris -
I have lost all audio on both my internal and external speakers.
I have lost audio on both my internal and external speakers. I have checked the System Preferences when my external speakers are plugged in it is acknowledged. When using internal speakers they are also acknowledged. Sound volume on Preferences is on and fully high. The sound buttons on the keyboard do not work and the sound level is now locked in at full sound and cannot be adjusted using the keys. The System Preferences shows that Mute is now checked and I cannot uncheck it. What should I do to get my sound back both internally and externally?
Repair permissions & restart.
Check your settings in the Audio Midi app which is located in the Utilities folder.
http://support.apple.com/kb/TS1574 Troubleshooting issues with no audio from built-in speakers on Macs
Trick/Tip: Open up GarageBand if installed then, open a program (optional).
Quit out of the GarageBand app.
=====================
Repairing the mysteriously muted Mac
The background on the issue is that there’s a small sensor switch inside the headphone port. When you insert a headphone jack, the sensor understands what's what and changes the sound output setting to Headphones. If you insert a jack for digital audio output, the device changes to Digital Out. When you remove the jack completely, it should read Internal Speakers.
The spirits tell me that there’s a very good chance that you recently had something jacked into this port—a set of headphones or a cable leading to powered speakers, for example. When you removed the jack, something in the port prevented the sensor from tripping correctly. That’s why you see Digital Out instead of internal Speakers.
The solution is to force the sensor to do its job. The safest way to do that is to simply run a jack in and out of the port a few times. Much of the time, this takes care of the problem by correctly tripping the sensor. If that doesn’t work, there may be gunk in the port. Before turning to more invasive techniques, get a can of compressed air, attach the small tube that fits the nozzle, and blast a few shots of air into the port. With any luck, that should dislodge the gunk and the port will operate as it should.
If that doesn’t work, find a foam-tipped swab that fits (electronics shops generally carry them), dip it in rubbing alcohol, and gently insert it into the headphone port in an attempt to wipe away any stubborn gunk. I recommend foam rather than cotton swabs because the cotton variety might leave threads behind. (This same technique works well with misbehaving headphone ports on devices such as iOS devices.)
It's possible that gunk has nothing to do with it. Rather, it may be that the switch just needs a subtle nudge. If a jack or swab doesn't work, I've heard of people successfully resetting it with a deft poke of a toothpick.
http://www.macworld.com/article/2031146/repairing-the-mysteriously-muted-mac.htm l -
[weblogic 8.1-sp4] EAR and statics placement
stupid question maybe, but i haven't found any clue.
i have an EAR with some WARs and static stuff packed at the root of the EAR like "images/foo.gif", "styles/bar.css" etc. in our JSPs inside the WARs we use JSTL core "url" tag to resolve these links like <img src="<core:url value="/images/foo.gif"/>"> or <link rel="stylesheet" type="text/css" href="<core:url value="/styles/bar.css"/>">. all the stuff was in a single WAR before, but now when i've moved the statics away to the root of our EAR all such links are apparently broken.
so the first question is how do i refer to statics placed at the EAR root from JSPs inside WARs (possibly without changing all thousands of pages that we have)?
and the second is why none of the resources are accessible from browser using "http://localhost:7001/images/foo.gif" or "http://localhost:7001/styles/bar.css", which always give 404? could it be due to security constraints?I meant exactly what I said. You have to figure out the best way to implement that. If it's most effective to merge the WARS, then do that. There are other possibilities. You could deploy the shared content on a content delivery network (a fancy term for a separate fast server farm) and have your separate WARs reference them with external URLs to the CDN.
Concerning the "why" question, I would just say "because". WebLogic is an implementation of the JEE specification. They've added extensions, but nothing that directly addresses your issue. -
I have an iPhone 4 and the speakers arent working and the sound works in headphones on when my phone is charging, do you have any suggestions on how to fix this?
Hi courteney17,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with sound on your iPhone 4:
iPhone: No sound or distorted sound from speaker http://support.apple.com/kb/ts5180
Cheers,
- Judy -
Speakers sound issue on Envy 14 Beats Edition
Hi all,
For few days now, my one year Envy 14 has a weird speakers sound issue. When the sound level passes over 50%, there is a lot of scratches and distorsion on the speaker, in that case, it is not usable at all.
Note that this issue does not happen on the jack outputs, with a headset, the sound is perfect, or it is as it also was on the speakers some days ago.
I'm posting here to be able to find the source of the issue. My Envy runs Ubuntu from the beginning, I've just tested with a old Ubuntu LiveCD and the problem is the same, so this is not a Ubuntu or software issue.
Now, my main question is does this come from the speakers themselves? From the audio board? From the main board? How can I diagnose?
Thanks for your help.I have the same exact problem with mine. I have a problem with my webcam as well. They are both hardware problems and need to new parts. If I knew where to get them I would have have told you.
-
Plug and play speakers not working properly after upgrading to Windows 8.1
After upgrading to Windows 8.1, my plug and play speakers do not work properly. I have uninstalled and reinstalled them, and restarted. When I try to play music, nothing comes out. If I turn them off and back on, music will play for approximately 30 seconds, only from one speaker, then it turns off and fades to no sound. They worked fine until I upgraded to Windows 8.1. The manufacturer has not been able to successfully assist me. Has anyone else reported a similar issue after upgrading OS software? Any suggestions? These are fairly new speakers, less than 2 years old, and not used very much. I do have them installed via a K-V switch, and all other devices linked to the K-V switch are functioning properly (monitor and wireless keyboard). Any suggestions would be greatly appreciated.
@sisboldt ,
Hello and thank you for posting on the HP support forums.
So that I can better help you with your sound issue. Please post back with your full model and product number. Use this link to help you find the information.
HP Notebook PCs - How Do I Find My Model Number or Product Number?
Here is another link you may find useful. Please give it a read before posting back with your system information.
Advice for asking the "Very Best Question"
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP
Maybe you are looking for
-
Does anyone know how to solve: "Firmware update failure. Disk write error"?
Hi all, Here is the list of all what went wrong and where I am now: 1. My Ipod worked well 2. I wanted to update it, you know, the normal thing with Itunes 3. Every time I tried, my computer froze. I was unable to add only one song (both automaticall
-
Logic 9 quitting on startup w/ Snow Leopard 10.6?
Hi I recently upgraded to snow lep 10.6.0 Not really big on all this tech stuff I just use logic 9 making music but since I had to upgrade from Leopard to Snow Lep so i can update my maschine software, I now cant open logic and it quits on startup. I
-
How do I get adobe flash to run on my MacBook pro
Downloaded adobe flash but videos still won't play. Please help.
-
Business system is not displaying in Integration Directory
Hi Friends, i'm doing RFC to RFC scenario.. here.. upto IR(Integration Repository ) i did every thing fine.. but in ID(Integration Directory ) for assiging business systems i did't get one business systesm. in SLD part every thing i'm get
-
Hi, I've been having some problems with Finder recently. The first is the left hand column, when I start the computer, is not wide enough, so a lot of the items come up as Applic.... or Docum.... How can I stop this happening? Also, I seem to have th