Muffled sound from new imported CD

It started with cds with small scratches on them that were poor quality. Now even the brand new cds that get imported have parts of the song that are distorted. Its not all through the song , just sertain bits.

Are you using AAC or MP3? And at what bit rate?
Also, try burning a CD using a different codec like WMP or LAME. Then add folder to iTunes. Do you get the same result?
HTH

Similar Messages

No sound from new device

hi
just bought a new x-fi xtreme but i'm getting no sound from it at all.
in device manager it sees it working and no problems.
latest drivers are installed & old drivers uninstalled.
under the windows sound mixer which sits on my taskbar, it has cross through the speaker, and if i click it to open the mixer, it says "no audio device is installed" even though if i hover over the icon, it will show SB X-Fi Xtreme Audio & volume at 0.
if i open the creative volume panel, the volume control is at 0 and greyed out.
when i run the diagnostics tests i get these results:
LogCreative Diagnostics Test Log
Detected device:
SB X-Fi Xtreme Audio
Tested device:SB X-Fi Xtreme Audio
2/28/2009 08:25:04PM Drivers Tests Pass
2/28/2009 08:25:05PM Windows Multimedia Tests Pass
2/28/2009 08:25:05PM DirectSound Tests Fail.
i have my speakers connected to line 2(green) & headphones connected to line 3.
anyone know what could be causing this?

never mind, i took it back and got my money back, bought a xonar instead...which works perfect
thanks for the no help creative

Sound from new MSI R9 280X - coil whine? RMA?

Hey all.
Just trying to determine if the sounds coming from my new PC's video card are normal or not. Here is my build: au.pcpartpicker.com/p/1XKQb
I hear this sound when running what I would consider low end graphics tests as well as when I booted up BF4 for the first time last night. Graphics automatically set to high.
I've recorded a few sounds of the 'squeals' that I hope are good enough for people to make a judgement. The sound seems to be coming from the part of the video card where the power connects. I have reseated the card and tried using a different power cable. It is not an issue with the fans.
First is a capture from a test in Unigine Valley:
soundcloud.com/angryeye/sounds-from-friday-evening
Second is a sound from loading Team Fortress 2 and then moving the mouse a little bit.
soundcloud.com/angryeye/sounds-from-friday-evening-1
Interestingly, when I enable Vsync in Team Fortress 2 the sound disappears. If I enable Vysnc in the Unigine Valley test, it does not make a difference.
I also ran a test in the 3D Mark(did not have the option to change anything as it is only a demo) and the Ice Storm made the worst sounds from the card:
soundcloud.com/angryeye/ice-storm
soundcloud.com/angryeye/ice-storm-2
Considering buying 3DMark so I can muck around with the settings a bit and see which cases I hear the sound and which i don’t
I also loaded up BF4 last night and got the noise with VSYNC enabled or disabled(can record if needed). Also the same issue in Deus Ex, makes sounds with Vysnc on and off.
Can anyone with a MSI R9 280x confirm if this is normal? Is this coil whine? Reviews on newegg seem to indicate a lot of people are getting similar sounds and I’m not really thrilled with this considering it’s a brand new card and the first time I've built and i can hear this through the case and fans.
Could it be something that can be fixed by modifying voltage settings (as it seems to come from the power connection)? Or does this require an RMA?
Any advice appreciated.

so your parts are:
CPU: Intel Core i5-4670K 3.4GHz Quad-Core Processor
Motherboard: MSI Z87-G45 Gaming ATX LGA1150 Motherboard
Memory: G.Skill Ripjaws X Series 8GB (2 x 4GB) DDR3-1600 Memory
Storage: Samsung 840 Series 250GB 2.5" Solid State Disk
Video Card: MSI Radeon R9 280X 3GB Video Card
Case: Cooler Master HAF XM (Black) ATX Mid Tower Case
Power Supply: Antec HCG M 750W 80 PLUS Bronze Certified ATX12V Power Supply
Operating System: Microsoft Windows 8.1 Pro - OEM (64-bit)
ok there are 2 causes of coil whine and odd noises so be totally sure its coming from the Graphics card itself by getting your mike directly over it and move it around and test other parts for noise as sometimes its The PSU (Power Supply Unit) that is doing it or it can cause it as yours is a split +12v unit (+12V1@40A, +12V2@40A) it may be the cause as Antec at times do not make reliable units (those rating is has for 2 rails look to me as being fake as they exceed its power limits combined (12v x 80A = 960W so it can probably do 40A on one but then the other will be terrible at 22.5A as it looks like there doing virtual +12v rails with 40A OCP fuses)) so its suspect as it may not be behaving well!

PE8 unable to play 5.1 sound from an imported .m2ts

I import an .1080i 5.1 m2ts into PE8 and drag it onto the timeline. The video lays out ok and the audio track indicates 5.1. However, no sound track is displayed and no sound occurs during playback. The m2ts plays fine from Windows Media Player. I completely wiped my machine back to factory Win7 HP and the latest MS updates with a fresh install of PE8.0.1 but still no sound. I've tried two presets: NTSC/AVCHD/Full 1080i 30 5.1 channel and 1080i 30 5.1 channel with no luck. What am I doing wrong?
1080i 5.1 recording is stored on a Scientific Atlanta Explorer 8300HDC PVR STB. STB is connected via component video and optical audio cable to Hauppauge HD-PVR. .m2ts is created using Total Media Extreme video capture from STB playback through HD-PVR. Workstation is a Gateway NV7923u laptop i5 M430 2.27GHz, 4GB RAM, 500GB HDD (300GB free), Windows 7 Home Premium 64-bit.
MediaInfo 0.7.43 shows the following attributes for the .m2ts:
General
ID                               : 0 (0x0)
Complete name                    : F:\2011\KS2011SC\KS2011SC.M2TS
Format                           : MPEG-TS
File size                        : 15.0 GiB
Duration                         : 2h 29mn
Overall bit rate                 : 14.3 Mbps
Maximum Overall bit rate         : 18.0 Mbps
Video
ID                               : 4113 (0x1011)
Menu ID                          : 1 (0x1)
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=1, N=64
Codec ID                         : 27
Duration                         : 2h 29mn
Bit rate mode                    : Variable
Bit rate                         : 13.2 Mbps
Maximum bit rate                 : 20.0 Mbps
Width                            : 1 920 pixels
Height                           : 1 080 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Interlaced
Scan order                       : Top Field First
Bits/(Pixel*Frame)               : 0.212
Stream size                      : 13.8 GiB (92%)
Color primaries                  : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics         : BT.709-5, BT.1361
Matrix coefficients              : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio
ID                               : 4352 (0x1100)
Menu ID                          : 1 (0x1)
Format                           : AC-3
Format/Info                      : Audio Coding 3
Mode extension                   : CM (complete main)
Codec ID                         : 129
Duration                         : 2h 29mn
Bit rate mode                    : Constant
Bit rate                         : 384 Kbps
Channel(s)                       : 6 channels
Channel positions                : Front: L C R, Side: L R, LFE
Sampling rate                    : 48.0 KHz
Bit depth                        : 16 bits
Compression mode                 : Lossy
Delay relative to video          : -100ms
Stream size                      : 412 MiB (3%)

Did you create a New Project with the AVCHD - 5.1 SS Audio Preset?
If so, then the Audio should go onto Audio 1 Track. If not, then it will go to a higher numbered Audio Track, and you will need to scroll the Timeline vertically to see that Audio Clip.
Also, when you Imported that Clip, did you allow it to Conform the Audio? This ARTICLE will give you some background.
Good luck,
Hunt
PS - note that the above is for editing in Timeline View Mode, and not in Sceneline View Mode.

Muffled sound from rear speakers (t7700)

I hooked up new T7700 speaker set up to my new Audigy 2 ZS Gamer and when i watch movies or play games i hear nothing from my rear speakers. if i put my ear right by them then i hear that there is sound coming from them but very quietly.
side front and center work fine any ideas?

That would be normal for a 5.1 system, rear is very discrete.
Use the speaker test and you should hear the level increase. or use cmss to play cd music to back 2 speakers.
[edit] sorry didnt see the bit with side speakers.
Select 5.1 instead of 7.1
if you still want to use 7.1 then check the settings in the decoder bit and look at where you are mapping the speakers to. like in a 7.1 speaker configuration map 5.1 content to etc\
For 5.1 movies use the rear mapping, or the side mapping,
if you want all the speakers on then select the side and rear option then whatever sound you get from the speakers will be a bonus.
Message Edited by dontasciime on 01-20-2005 10:06 AM

No sound from new speakers

We got a set of bose speakers, plugged everything in as instructed but there is no sound coming from the cable box. Got a new cable box and hdmi cable, still no sound. The bluray works great. What gives?

Since the Bose Cinemate Series II speaker system has only one usable active digital input.... the easiest way to have both the Blu-ray player and the cable box playing in the Bose without having to keep switching the optical cable back and forth between the two sources, is to have both of those devices hooked into the HDMI inputs on the TV and just have the Bose's optical cable running from the optical out on the TV into the optical input on the Bose.

No sound from new Viewsonic monitor

I just got a new mini--hooked it up to the Viewsonic VA1930wm monitor and no sound comes from the monitor. When I go into the sound preferences--it doesn't seem to see it. The mini itself has sound--but I want it to come from the monitor. There are no drivers available..am I doing something wrong?--or should I get a different monitor--and if so--which one?
Marilyn

Welcome to Apple Discussions!
Most monitors with audio have an audio in 1/8th inch input jack to run a cable between the monitor and the computer's sound output jack. Usually it comes supplied with a cable to go between the computer and the monitor that fits that jack. If your monitor was missing such a cable, you can buy it at Radio Shack. Look at the under side or back of the monitor for where the video cable comes in. Somewhere near there should be the audio jack. If there are multiple, you may need to split the channels coming out of the stereo built-in to the back of the Mac Mini. Which Mac Mini model do you have? Is it an Intel or PowerPC?

Muffled sound from ipod classic

I have a classic that the sound is muffled whether connected through earphones (several tried) or through a dock or dedicated lead to my alpine head unit,I have tried updating everything through itunes a couple of times but it is still the same...music and vocals are not clear and it is very muffled. Help.

My classic 80 GB ipod that I bought 2 years ago now has no sound at all. Initially, it came and went and now no sound. I can see that the music is playing on the screen, but no sound comes out either on earphones or dock.
no warranty anymore and don't want to have to pay $160 to fix it. I restored the IPOD but still no sound. HELP!!!!

No sound from new computer

I purchased a HP Pavillion a6700f with Vista last month and tried to hook up my four year old self powered Boston Acoustic 735 digital speakers to it. It uses a single analog line that I plugged into the green jack on the back of the computer as indicated in the instructions. No joy. I updated the Realtek driver and still no success. I took the speakers into work and plugged them into the HP there (using xp) and they work fine. After three hours of the India tech guys taking control of my system, I was informed that Vista does not support speakers that worked on the XP operating system and I would have to buy a new set (which he was only too happy to sell to me at that time). Supposedly there is a tech report that speaks to this issue, but the tech guy could not provide me with a number or web address for it. I have had no success finding it. Does anyone know if this is true? If not, any clues on what other options I have?

OK. First make sure you those the kind of speakers that need to be powered via the power adapter and that you have a green audio plug. The orange connector used in older models don't have that port needed on any new pc anymore.
I call bullcrap (excuse my language, but can't keep quite to a such a Tech's comments, being a technician myself) that you need to get "vista" speakers. There's no such thing as XP speakers or Vista speakers. Speakers don't need drivers and are not related to the Operating System any way way, shape or form. All you do is power them and plug them in depending on your configuration.
Make sure they're plugged in the back of the computer via the greem front audio output color coated port and make sure they are turned on and that the volume isn't muted.
Then in Vista, login the pc, look on the bottom right of the comuter screen next to your clock, there's a white speaker icon. Just go with the mouse over it and it should say this:
Volume xxx
Speakers
Realtek Digital xxxxxxxxx
If instead of speakers it says HDMI Output or Realtek Digital Output then it's set to the wrong playback device. So rightclick on that white speaker icon, choose Playback Devices and when the new windows comes up look in the middle. It should say Speakers, Enabled, Working. Also make sure it has the green check mark on it.
If it doesn't rightclick on the grey speakers picture and choose Set as Default Device and then Apply or OK and restart the pc.
Also on the top choose the Sounds tab and make sure it says Windows Default sound scheme and also check the voume and make sure it's not muted or low.
Best of luck.

No sound from new soundcard

I have installed a new Diamond Xtreme Sound 7.1/ 24 bit sound card in my system. I get all of my regular computer sounds, and Windows Media Player works, but iTunes acts like it is working, but no sound is heard.

Hi warres1,
Try the general tips in this article: http://support.apple.com/kb/TS1362
-Jason

My iMovie has no sound in new imports.

I have imported home made dvd's of piano recitals into iMovie. There is no sound.
I used iMovie '08 and also '11. I imported the dvd's thru HandBrake. It has worked for
years - but now - no sound. I have called Apple support. I have used my local Cafe Mac technicians.
Any ideas out there?
My OS is 10.7.5

First: We did switch to MPEGStreamClip with the same result - No sound in iMovie.
Second: Thanks for your recommendation of MPEGStreamClip over HandBrake. However, HandBrake has been completely satisfactory for the last 5 years. Just not this time. I think the problem is not HB but something Apple. My local Cafe Mac techs say they have seen the no sound situation before and have been able to correct it by using an earlier version of iMovie. However, I did use iMovie '08. An upgrade to iMovie '11 didn't help.
Thanks for replying to my inquiry.

Unable to get sound from new ATV installation using either HDMI or optical audio to Bose receiver. Good video using HDMI.

Need help setting up my Apple TV. I have good video, but no audio using either the HDMI cable by itself or by connecting a optical video cable through the aux receiver for home theater. I've replaced the Apple TV box, swapped out HDMI cables, reset the Apple TV box, all to no avail. Any suggestions? Thanks

Connected only using HDMI to Onkyo Receiver and HDMI out to Samsung 1080p TV. So far so good.

I-movie 9 removing sound from imported video

I cannot using any instructions I can find remove sound from an imported video.
It was very easy in i-movie HD, but in that I could not speed up the soundless video to match a voice-over added just as easily.
Whatever I did, the Detach Audio remained grey and unusable.
Can anyone tell me which is supposed to be better - i-movie 9 or i-movie HD?
WHy do they have two systems running in parallel?
All clues welcome

Hi
Which I could help. Can't.
Can anyone tell me which is supposed to be better - i-movie 9 or i-movie HD?
Yes. iMovie 1 to HD6 and iMovie'08 & 09 are two totally different products - not related
in any close way at all.
iMovie'08 & 09 are Wrongly named - so that they most often are misstaken to be related.
Yes -
• iMovie 1 to HD6 are supperior - IF YOU use miniDV (interlaced SD-video) and aim to make a DVD
• iMovie'08 & 09 are for material from newer HD, hard disk, memory card and mini DVD Cameras
and are aimed for quick editing and web publishing. (DVDs will not be as good as they can)
Yours very understanding - and whiching that I was of more help - Bengt W

My audio has a scratchy muffled sound sound when i watch vidoes. how do i get rid of that?

How can I get rid of the scratchy muffled sound from the audio on my Laptop? I hear this when I watch internet videos?
Thanks,
jameswj2

Your iPod is in recovery mode. You'll need to restore the iPod through iTunes on your computer.
Regards.

I am not being able to play sound when I import a .MTS file from my folder

I am not being able to play sound when I import a .MTS file from my folder on my sequence bar of my Premiere Pro CS6. Even if I use my Media Browser to import the file, the video plays fine, but the audio is disabled it seems. I don't know what to do since I have used .MTS files before without hassle on CS5.5. It is quite frustrating. What can I do?

Hi debesh05,
Please mention the Operating System that you are using and also make and model of the Camera that was used to capture those clips. Also, try to make another folder with the same name in the same location where the .MTS files are and move all the clips into the new folder and then try to import the files again using Media Browser in Premiere Pro CS6. If this doesn't work then make a copy of one file and rename it as .M2TS and then import that single file into Premiere Pro CS6. Please update if either of the solution works for you.
Regards,
Vinay

Muffled sound from new imported CD

Similar Messages

Maybe you are looking for