Muliple Essbase Option after the Essbase 11.1.1.3 client install?

Hello Gurus -
Has anyone come across this issue where after the 11.1.1.3 client install for some computers the Essbase option shows up thrice in addins?
The essbase retrieve etc works fine though.
Pls, let me know if any knows the fix for this.
Appreciate the help in advance.
Regards

Hello Gurus -
Pls, can someone guide me in the right direction.
Appreciate the help!
Regards

Similar Messages

  • Adding reminders to my calendar items is no longer an option after the software upgrade.  I also can't get to day and week view, only month view.  What's a possible solution?

    Adding reminders to my calendar items is no longer an option after the software upgrade.  I also can't get to day and week view, only month view.  What's a possible solution?  I'm using Andriod version 4.4.2 with kernal 3.4.0.

        @MaloneTP
    Thanks for keeping me updated!  Do you see the screen options displayed in the following link: http://bit.ly/T2koBL for changing the calendar view options in Kies Air?  Also, let me know if you're able to add a Reminder by following these steps: http://bit.ly/T2l9dY.  Keep me posted.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • How can I empty my trash email. There is no delete or delete all option after the emails are highlighted from the edit option. This is on an i phone 4 running on ios 7.1.2

    How can I empty my trash email. There is no delete or delete all option after the emails are highlighted from the edit option. This is on an i phone 4 running on ios 7.1.2

    I have 7 email accounts on my phone. If I tap EDIT while viewing the Trash folder in any of them I see "Mark All" on the left and "Delete All" on the right. If you tap any message, however, the legends go away.

  • Last night i was downloading the new update for the Iphone, and after the download was done and trying to install, it errored out.  And now my phone is stuck on the screen with the itunes icon and the USB.

    Last night i was downloading the new update for the Iphone4 on my laptop through Itunes.  After the download was done, it was starting to install, and then an error came up and didnt get a chance to check it.  Now my Iphone is stuck on the screen with the USB pointing to the Itunes Icon and wont do anything else.  Any advice on how to get this fixed, or do i need to go to the Apple store and have them look at it.

    slawdog31 wrote:
    Is the sleep wake button at bottom center of the Iphone or on top?
    Top
    iPhone User Guide

  • HT4623 hi when i start updating may iPhone with IOS.6 After the updating bar completed when i pressed install then a verifying update note appears ater awhile i get a note reading( Unable to install updating An error occurred installing iOS.6.)

    i whent through the updating proceduer but i still get this not (Unable to Install Update An error occurred installing iso.6) After the note of verifing updated .

    Even I got same mesage but after restoring the phone using itunes, it worked for me. First restore and update your phone again using itunes.

  • I can't accessed system recovery options after the repairing process was interrupte​d.

    although it's not my PC, i'm still concern about it (it's actually a public computer in our library). I actually tried to repair it using the system recovery options of windows 7 with thinkvantage technoliogies  but i interrupt it because maybe someone will caught me and i will be mistakenly be liable. and the result is after i restared it, it restarts over and over again, with BSOD appearing for a split second. i tried to use disable autorestart on system failure feature, and i saw the BSOD. but the real issue is i can't go through the recovery options, only until the part when i'm asked to select a keyboard input method, then the next part is this message: "You must log in to access System Recovery Options. If you are having trouble logging in, please contact your computer administrator for assistance. Click OK to restart the computer." anyway, this is the BSOD says: 
    A problem has been detected and windows has been shut down to prevent damage to your computer.
    If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
    Disable or uninstall any anti-virus disk defragmentation  or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
    Technical in formation:
    *** STOP: 0x00000024 (0x00000000001904, 0xFFFFFA800690D840, 0XFFFFFFFFC0000102, 0x0000000000000000)
    I hope this problem will be solved as much as possible.  thank you in advance. and i also don't know what model of this Lenovo all-in-one PC is. but i think this is 3318F9U, and its i forgot its BIOS version, and i don't know how to access it. and also, i'm not sure if there's a preloaded Superfish in this all-in-one PC, maybe the vulnerability started it. because i recently read an article regarding the Superfish's vulnerability.

    Hello and welcome,
    Please remeber that this is a peer-to-peer forum (users helping each other) not the Lenovo support site.  There is some Lenovo presence, but  if you need urgent support, please try your local support office:
    Philippines
    THINK-branded products
    Tagalog, English
    1-800-8908-6454 (GLOBE subscribers), 1-800-1441-0719 (PLDT subscribers)
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Why do i not see premier pro as an app option after the cloud is installed?

    the cloud was installed and premiere does not show up as an video app option  for install. Why?

    Usually, if an pplication is not display/listed it is because the machine involved is not compatible with it.  Check the Premiere tech specs and see if the machine comes up short.
    http://www.adobe.com/products/premiere/tech-specs.html

  • My S4 is unable to connect to the cellular network after the 4.4.2 update failed to install this afternoon.

    I attempted to install the OTA update for 4.4.2, but received an error message that the installation failed. When my phone rebooted it was unable to connect to the cell network and was extremely sluggish. I own an iMac and the S4 is no longer recognized by Kies or Android File Transfer.
    I attempted turning off the phone and removing the battery and Sim, to no avail. I also attempted to access the recovery tools, but the phone will no longer boot to recovery. I tried a factory reset, but I do no recall ever setting the security PIN it seems to require.

        Hello Vidar403
    I'm so sorry your having data connection issues. I would like to check the account and see if this is network related. Please accept my follow request and send us a private message.
    JoeL_VZW
    Follow us on Twitter @VZWSupport

  • How to add Oracle Partition Component after the RDBMS Installation

    Hi,
    I have been installed Oracle 11g R2 in Suse Linux 10 (64 bit), while in installation i deselect the Partition option. Now i need to bring the Oracle Partition option to my Oracle RDBMS.
    Please help me how to bring the Partition Option once again into my Oracle Server.
    Thanks in Advance,
    Baalaji V

    Same senario i have here, But i want to know how to install the Partition option after the RDBMS installation.
    Since i have been installed the Oracle 11g R2 Ent Edition without Partition option, Now i need to install the same.
    Thanks.

  • Empty selection options  after report run

    Hi,
    After the execution of my abap report sap returns to the selection options screen in which all the selected values from the run are still mentioned. How can i refresh the selection screen (so no values in the selection options after the report run) ?
    this is the code (all parameters as you can see) :
      parameters :  p_matnr   like mara-matnr default ''.
      parameters :  p_werks   like mard-werks default 'XYZ', 
                    p_lgort   like mard-lgort default ''.    
    selection-screen skip 1.
      parameters :  p_qty     like sy-tabix default 1.
    selection-screen skip 1.
      parameters :  p_file    like RLGRAP-FILENAME memory id GXD.
    with regards

    hi
    i tried for select-options try for parameters
    at selection-screen .
    if sy-ucomm = 'ONLI'. " Only when execute is pressed
    v_low = s_kunnr-low.
    v_high = s_kunnr-high . " Hang on to this for select statement
    clear s_kunnr[].
    clear s_kunnr. " Clear the screen parameter
    endif.
    for your program
    data : matnr like mara-matnr,  " variables are taken so that we can have the values for further                                     operations         
          werks like mard-werks,
           lgort like mard-lgort,
           qty like sy-tabix,
           file like RLGRAP-FILENAME.
    at selection-screen.
    if sy-ucomm = 'ONLI'. " Only when execute is pressed
    matnr = p_matnr.
    clear p_matnr.
    werks = p_werks.
    clear p_werks.
    lgort = p_lgort.
    clear p_lgort.
    qty = p_qty.
    clear p_qty.
    file = p_file.
    clear p_file.
    endif.
    start-of-selection. " write what ever code you have for the start-of-selection
    NOTE "Remove the memory id for p_file otherwise it will not be cleared
    regards
    prasanth

  • Is it possible to  laod navigation options after querry is displayed

    Hi
    I have a question concerning the display of a query. Us ut possible to display a query and load the navigation options after the query has been displayed (in other words in the background)?
    [I am talking about the query property on how to load a query with option A, H and X]
    If yes, does it provide a relevant performance benefit in the case of using large hierarchies?
    Thx,
    Nana

    There is, but the preferred way to do something like this is through
    the action reference expression which is attached to a UCommand
    component. So you could do something like the following:
    1. set up a class which extends javax.faces.Action:
    import javax.faces.Action;
    public class RegisterAction extends Action {
    public String invoke() {
    return checkUserName();
    Set up an accessor method (javabean convention) in your business
    object bean that returns the Action instance:
    public class Register {
    public Action getRegisterAction() {
    return registerAction;
    2. set up a mapping for the Navigation Handler (assume user.jsp
    is the page where the user enters data, and welcome.jsp is
    the page that gets displayed on successful outcome). Set this up
    in your faces-config.xml:
    <navigation-rule>
    <from-tree-id>/user.jsp</from-tree-id>
    <navigation-case>
    <from-outcome>success</from-outcome>
    <to-tree-id>/welcome.jsp</to-tree-id>
    </navigation-case>
    <navigation-case>
    <from-outcome>failure</from-outcome>
    <to-tree-id>/user.jsp</to-tree-id>
    </navigation-case>
    </navigation-rule>
    Make sure that the checkUserName() method above, returns a string
    that matches the "from-outcome" element in your navigation mapping
    (in this case - "success" or "failure").
    3. attach the actionRef expression to your button component as follows
    in your jsp. Something like:
    <h:command_button commandName="register" actionRef="Register.registerAction"/>
    Hope this helps, Roger.

  • Fan Control Option in the EM

    Can Lenovo enable the fan control option in the EM?
    I know I can install other versions of the EM software but, I won't have the yellow color improvements found in the Yoga specific EM.

    robik,
    Try adding an Order By clause to your SQL.
    Jeff

  • Essbase not coming up after the upgradation of server

    <p>Hi ,</p><p>     Can any one help me out inthis.</p><p> </p><p>There was a solaris server upgrade on which our essbase isresiding(version 6.5.4).After the upgradation,the application wentdown and when we tried to bring essbase up we got an error messageas below:</p><p>-------------------------------------------------------------------------------------------------------------</p><p>Fatal Error: Essbase is already loaded<br>ld.so.1: ESSBASE: fatal: libessnet.so.1: open failed: No such fileor directory</p><p>---------------------------------------------------------------------------------------------------------------</p><p>Was this because the upgradation has corrupted some of thefiles? can anyone please tell me what does this file do with theessbase coming up.</p><p> </p><p>Or if anyone has faced similar kind of problem.<br></p>

    Quote from: AaronYuri on 23-September-07, 06:22:38
    He wants system, power supply specs and amperages on the +12v rails.
    You didn't read it correcty:
    First sentence of the Moan Guide...
    DFI RS482 Infinity Rev 10. BIOS rev 6.00
    Athlon X2 3800+ @2.4ghz
    2x1GB PQI 3-4-4-8 @200Mhz
    WD 250GB
    MSI RX2600XT Diamond DDR4
    Catalyst 7.9
    Windows XP Media Center 2002 SP2
    Sparkle ATX-450PN-B204 450W
    +12 min 11.78; max 11.97; current: 11.90
    I don't know why this spec has anything to do with my problem.
    As I stated before, I have NO PROBLEM with nvidia card installed on my system.
    I can hear the computer running through POST but I cannot see anything on my display until the blue Windows Welcome screen and my desktop.

  • Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options.

    Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????

    SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.

  • I can't find the 2G, 3G and LTE options after updating to iOS8.1, can anyone help me with this? I'm using iPhone5s

    I can't find the 2G, 3G and LTE options after updating to iOS8.1, can anyone help me with this? I'm using iPhone5s

    I have check on my service provider about the correct APN settings, but unfortunately doesnt work still..

Maybe you are looking for

  • Outgoing Payment against JE

    Hi, We need to make outgoing payment against credit balance of BP (transaction made through JE). Now after payment, how to link / reconcile these transaction. Eg. BP1 has CR balance (5000) through JE. Payment made 3000 By this BP account updated but

  • HT4847 When I open itunes my icloud icons are gone. Where is all the music that I have in icloud?

    I opened my itunes library today to find that my icloud icons are not there. Where do I find all the music that I have stored in icloud??

  • Printing setting in Production Scheduling Profile

    Hello Guys, In Production Scheduling Profile (OPKP) there is a config setting "On Release" Execute Printing. I used this setting. But I could not print the production again. I want to re-print the production order. How do I enable re-printing the pro

  • OSb-XQuery-TypeConversion(decimal to int)

    Hi all, I need some help in Xquery Transformation Source element type is decimal target element type is int I need to convert to decimal to int in Xquery. Actually I tried like this way <targetElement>{xs:int($sourceElement)}</targetElement> <error>E

  • Web based PDF Doc question - not sure how to describe

    My manager has asked that I research a way to change a web based pdf file to allow fellow co-workers to either download it has a whole, or just sections of it.  I've tried looked into bookmarks and portfolio, but it just doesn't seem to do what he re