Muliple Geometry Objects into a Single geometry

Hello,
Is it possible to store multiple geometry objects into one geometry. ie I am having an ARC and SHAPE geometry , I need to combine these geometries into one geometry .
So that the geomtry which I have created is a container for ARC and SHAPE.
Thanks in Advance
Senthil

Hi Senthil,
I am confused a little by your terminology, so I will try to answer as best I can.
A single geometry can be made from multiple elements.
The elements that make up the geometry can be all the same kind (points, lines, polygons).
The elements that make up the geometry can be heterogeneous (points and lines, lines and polygons, polygons and points, points lines and polygons). These are known as heterogeneous collections (sdo_gtype 2004 if 2 dimensional).

Similar Messages

Concatenation of Data from 4 infoobjects into a single cell in Bex Report

Hi,
I have loaded ODS with the description data. The source system for loading the ODS is the flat file. The ODS data should be a replica of the flat file.
In the flat file, there is a description field corresponding to a particular ID. This Description is greater than the standard 60 char length. So, I had to split the description while loading the flat file using single line routine in the Transfer Structure.
So, while loading different the data, I split the description field data from the flat file into 4 infoobjects and the flat file data was loaded into the ODS.
Now, from the reporting point of view, I need to display the entire description data from the 4 info-objects into a single cell in the Bex report.
Please suggest a solution for this.
****Points will be awarded***

Hi Vineet,
Thanks for the response.
Could you please help me out with the VBA script(code) that needs to be written in the macro.
Thanks in Advance.
****Points will be awarded****
Regards,
Hitesh Shetty.

Pasting multiple objects into frame

Greetings everyone
I was wondering if someone could shed some light on how to best paste multiple objects into a single frame.
Mainly, I'm trying to nest objects that form a part of a newspaper article header; since it's a design element that keeps repeating with each single article I don't want to spend time with manually positioning the elements each time--it's time consuming and prone to sloppiness.
Unfortunately, the base frame will have about three objects that need to be nested within it. Once I paste one object into a frame, the next time I do `Paste into`--the content (previously pasted object in this case) just gets overridden.
I've read that, to paste multiple objects into a single frame, one should group the objects first. Now this works pretty well for getting them into the frame, but leaves me with no options to position them relative to the frame. I can't move or position an object individually and I have no option to ungroup them once they've been pasted.
Here's a small mock-up to depict my peculiar predicament:
Ideally, I'm aiming to have the main header frame to fit the content of the nested objects and for it to be flexible enough that I can quickly span it across multiple columns as per article requirements.

!kRON wrote:
For items that are part of the group, their (X,Y) location coordinates are relative to the document--neither to the group nor the parent frame. The group itself has coordinates that are relative to the parent frame (X+ offset, Y+ offset). I can select the group and the parent frame and use the align to selection options. For individual items, I cannot make a selection of both them and the frame, only between items that are part of a group. I loose options to align an individual item relative to the parent frame, which means I have to drag them around and rely on smart guides.
I've tinkered around some more and it'd appear it's not possible to lay out the elements as I imagined. So I have to resort to grouping the items that would form a frame and pasting them into a frame. If multiple frames have to be members of a single frame I'd have to group the frames and paste them into the single frame and so on.
Based on my layout mock-up, I'd end up with 3 frames within the header frame:
Article header
Heading
Article type
Separator
Article heading
Title
Footer
Author
Shape
Based on experience, should I go with this or stick with the old fashined moving around of loose elements? Will it be a lot of work to maintain resizing and repositioning of the various items and their frames once I start changing the width and height of the header frame or will it save me some time?
I'm not a working designer or production worker, so anything new takes me longer than I think it should, because I don't have a rich reservoir of quick methods at my fingertips.
Your description above interested me, because I've been wrestling with the annoying limitations of manipulating and adding compound objects in anchored frames. For many situations, it's probably simplest to assemble each iteration of a compound object, that introduces a new element, outside the anchored frame, then group the elements and paste the grouped object into the anchored frame.
However, the arrangement of elements in your example made me think that a table might be a workable solution. The answer I arrived at is "Yes, it's a solution, but it takes a while to set up." If it's reusable easily, then it might be worthwhile investing in a few experiments.
I've attached a zipped idml interchange version of the file, and also a PDF.
Here are some notes:
* I created a table with three rows and three columns, no header or footer rows. Three columns because I thought I'd paste a vertical line into an inline anchored frame in the center cell of the top row, for the separator line. Later, I realized that defining the vertical cell rule as paper color would suffice, so I merged the two right cells on the top row to create a two-column row, with text in each cell and the vertical separator between them.
* I merged all three cells on the second row into a single cell.
* I merged the two right cells on the bottom row, but later, when I moved the cell rule to position the triangular graphic in the inline anchored frame in the right cell, it moved the vertical cell rule in the first row. So, I had to unmerge (or split) the cells, and cut/paste the triangular graphic's anchored frame into the rightmost cell. To position the anchored frame, I moved the vertical cell rule with Shift+Drag, to keep the table width unchanged.
* I sampled the purple color with the eyedropper tool while cells were selected and the swatch panel was set to fill the selected object.
* I didn't spend much time matching the type, as you can see. To position the text, I adjusted the cell margins in some cases, and left/right indention in some cases; I'm not sure which is more efficient in situations where there will be different amounts of text to fit. I didn't create cell styles or paragraph styles (BAH! Bad, bad, bad process) because I won't be repeating this stuff, but you probably will benefit greatly from defining styles for your repeating needs.
* The triangular cut into the bottom row made it easy to manage creating and positioning the graphic. A non-geometrical object might be trickier. The triangle is a text frame, set to negative space above, so it overlaps the cell above it, enough to avoid a black gap.
* Except for the vertical paper-colored divider line, all the cells have zero-width strokes.
* I created the table in a text frame, that I fitted down to the size of the table, but I can't remember if I selected, copied, and pasted the text frame into the text flow to anchor it, or if I selected the table in the text frame, copied and pasted it into the flow. Not sure if it makes a difference in work efficiency.
If I understand your general needs, this should work well for changing text and adjusting the column widths.
HTH
Regards,
Peter Gold
KnowHow ProServices

OLM - Merging Multiple Learning Objects into One

Does anyone have experience or success merging multiple OLM learning objects into one? I think that we are supposed to be able to do this by exporting a content folder that contains all the learning objects that we want to merge into one CBT. The export works for me, and the learning object plays, but the content is not complete or combined. I noticed that the new content contains files called metadata(0).xml and metadata(1).xml representing the two learning objects that I tried to merge into one. I wonder if there's something I'm supposed to do with these files. Has anyone been successful in merging content?

Content can be combined into a course structure like:
Course Learning Object
-- Topic 1 learning object
-- Topic 2 learning object
By creating a parent "course" learning object and moving the individual objects underneath it. The offering is then tied to that course learning object, so that when a user enrolls, in order to complete it the user navigates through both objects.
You cannot combine all the pages from separate objects into a single learning object as the pages themselves have no knowledge of each other.
Does that make sense?
Scott
http://www.seertechsolutions.com

How to bridge (fill) gaps when converting a 2006 geometry into a 2002 geometry

Is it at all possible to bridge (fill) gaps when converting a 2006 geometry into a single 2002 geometry. I have a solution for the conversion from 2006 to 2002 provided by BHall but upon further investigation investigation of my dataset some of the multi line polygons have gaps which I need to fill and I am not sure how to go about this.
Here is a simple example of what I am trying to achieve
Before
SELECT (sdo_geometry(2006, 81989, NULL,
 mdsys.sdo_elem_info_array(1,2,1,5,2,1,9,2,1,13,2,1),
 mdsys.sdo_ordinate_array(16,0.999,16.998,-0.001,17.253,-0.001,18.003,0.999,18.003,0.999,19.001,0.999,19.001,0.999,19.999,-0.001)))
FROM dual
After
SELECT (sdo_geometry(2006, 81989,NULL,
 mdsys.sdo_elem_info_array(1,2,1),
 mdsys.sdo_ordinate_array(16,0.999,17.253,-0.001,18.003,0.999,19.001,0.999,19.999,-0.001))) FROM dual
Thanks in advance

Okay Roché,
You might need to break this problem down into smaller parts for the forum. All your examples show the gap being replaced by a single vertice - e.g. you want to "snap" the gap together. I'd suggest this is just complicating your question. Once the gap is filled (with a line) then you can run SDO_UTIL.REMOVE_DUPLICATE_VERTICES afterwards to remove the new line if its below your tolerance. I think that Bryan's code wrapped in remove duplicate vertices will solve your second scenario. But overall I think it would be helpful to focus just on the filling and leave the snapping for a follow-up question.
So back to scenario #1, below is some code I wrote a while back that might do what you want or at least get you started. Note that the input must be a multistring and the multistring cannot be "spaghetti". In other words each line in the multistring must be disjoint or at most touch other lines only at endpoints. The goal is to sift through the lines and create a single linestring using the smallest gaps. It's not subtle and will indeed produce bad geometries if the inputs are setup in an impossible manner. There are also some rare geodetic bugs with SDO_GEOM.RELATE that crop up. So you'll note I test both distance and relate in some places. That's intentional though kind of dumb.
Hopefully this helps. If you improve the code please shoot a copy back to me.
Cheers,
Paul
CREATE OR REPLACE PACKAGE dz_gap_fill
AUTHID CURRENT_USER
AS
 FUNCTION linear_gap_filler(
 p_input IN MDSYS.SDO_GEOMETRY
 ,p_tolerance IN NUMBER DEFAULT 0.05
 ) RETURN MDSYS.SDO_GEOMETRY;
END dz_gap_fill;
CREATE OR REPLACE PACKAGE BODY dz_gap_fill
AS
 FUNCTION fast_point(
 p_x IN NUMBER
 ,p_y IN NUMBER
 ,p_z IN NUMBER DEFAULT NULL
 ,p_m IN NUMBER DEFAULT NULL
 ,p_srid IN NUMBER DEFAULT 8265
 ) RETURN MDSYS.SDO_GEOMETRY
 AS
 BEGIN
 -- Step 10
 -- Check over incoming parameters
 IF p_x IS NULL
 OR p_y IS NULL
 THEN
 RAISE_APPLICATION_ERROR(-20001,'x and y cannot be NULL');
 END IF;
 -- Step 20
 -- Do the simplest solution first
 IF p_z IS NULL
 AND p_m IS NULL
 THEN
 RETURN SDO_GEOMETRY(
 2001
 ,p_srid
 ,SDO_POINT_TYPE(
 p_x
 ,p_y
 ,NULL
 ,NULL
 ,NULL
 END IF;
 -- Step 30
 -- Do the other wilder choices
 IF p_z IS NULL
 AND p_m IS NOT NULL
 THEN
 RETURN SDO_GEOMETRY(
 3301
 ,p_srid
 ,SDO_POINT_TYPE(
 p_x
 ,p_y
 ,p_m
 ,NULL
 ,NULL
 ELSIF p_z IS NOT NULL
 AND p_m IS NULL
 THEN
 RETURN SDO_GEOMETRY(
 3001
 ,p_srid
 ,SDO_POINT_TYPE(
 p_x
 ,p_y
 ,p_z
 ,NULL
 ,NULL
 ELSIF p_z IS NOT NULL
 AND p_m IS NOT NULL
 THEN
 RETURN SDO_GEOMETRY(
 4401
 ,p_srid
 ,NULL
 ,SDO_ELEM_INFO_ARRAY(1,1,1)
 ,SDO_ORDINATE_ARRAY(p_x,p_y,p_z,p_m)
 ELSE
 RAISE_APPLICATION_ERROR(-20001,'ERR!');
 END IF;
 END fast_point;
 FUNCTION get_start_point(
 p_input IN MDSYS.SDO_GEOMETRY
 ) RETURN MDSYS.SDO_GEOMETRY
 AS
 int_dims PLS_INTEGER;
 int_gtyp PLS_INTEGER;
 int_lrs PLS_INTEGER;
 BEGIN
 -- Step 10
 -- Check over incoming parameters
 IF p_input IS NULL
 THEN
 RETURN NULL;
 END IF;
 -- Step 20
 -- Gather information about the geometry
 int_dims := p_input.get_dims();
 int_gtyp := p_input.get_gtype();
 int_lrs := p_input.get_lrs_dim();
 -- Step 30
 -- Handle point and multipoint inputs
 IF int_gtyp = 1
 THEN
 RETURN p_input;
 ELSIF int_gtyp = 5
 THEN
 RETURN SDO_UTIL.EXTRACT(p_input,1);
 END IF;
 -- Step 40
 -- Return results
 IF int_dims = 2
 THEN
 RETURN fast_point(
 p_input.SDO_ORDINATES(1)
 ,p_input.SDO_ORDINATES(2)
 ,NULL
 ,NULL
 ,p_input.SDO_SRID
 ELSIF int_dims = 3
 AND int_lrs = 3
 THEN
 RETURN fast_point(
 p_input.SDO_ORDINATES(1)
 ,p_input.SDO_ORDINATES(2)
 ,NULL
 ,p_input.SDO_ORDINATES(3)
 ,p_input.SDO_SRID
 ELSIF int_dims = 3
 AND int_lrs = 0
 THEN
 RETURN fast_point(
 p_input.SDO_ORDINATES(1)
 ,p_input.SDO_ORDINATES(2)
 ,p_input.SDO_ORDINATES(3)
 ,NULL
 ,p_input.SDO_SRID
 ELSIF int_dims = 4
 AND int_lrs IN (4,0)
 THEN
 RETURN fast_point(
 p_input.SDO_ORDINATES(1)
 ,p_input.SDO_ORDINATES(2)
 ,p_input.SDO_ORDINATES(3)
 ,p_input.SDO_ORDINATES(4)
 ,p_input.SDO_SRID
 ELSIF int_dims = 4
 AND int_lrs = 3
 THEN
 RETURN fast_point(
 p_input.SDO_ORDINATES(1)
 ,p_input.SDO_ORDINATES(2)
 ,p_input.SDO_ORDINATES(4)
 ,p_input.SDO_ORDINATES(3)
 ,p_input.SDO_SRID
 ELSE
 RAISE_APPLICATION_ERROR(-20001,'ERR!');
 END IF;
 END get_start_point;
 FUNCTION get_end_point(
 p_input IN MDSYS.SDO_GEOMETRY
 ) RETURN MDSYS.SDO_GEOMETRY
 AS
 int_dims PLS_INTEGER;
 int_gtyp PLS_INTEGER;
 int_lrs PLS_INTEGER;
 int_len PLS_INTEGER;
 BEGIN
 -- Step 10
 -- Check over incoming parameters
 IF p_input IS NULL
 THEN
 RETURN NULL;
 END IF;
 -- Step 20
 -- Gather information about the geometry
 int_dims := p_input.get_dims();
 int_gtyp := p_input.get_gtype();
 int_lrs := p_input.get_lrs_dim();
 int_len := p_input.SDO_ORDINATES.COUNT();
 -- Step 30
 -- Handle point and multipoint inputs
 IF int_gtyp = 1
 THEN
 RETURN p_input;
 ELSIF int_gtyp = 5
 THEN
 RETURN SDO_UTIL.EXTRACT(
 p_input
 ,SDO_UTIL.GETNUMELEM(p_input)
 END IF;
 -- Step 40
 -- Return results
 IF int_dims = 2
 THEN
 RETURN fast_point(
 p_input.SDO_ORDINATES(int_len - 1)
 ,p_input.SDO_ORDINATES(int_len)
 ,NULL
 ,NULL
 ,p_input.SDO_SRID
 ELSIF int_dims = 3
 AND int_lrs = 3
 THEN
 RETURN fast_point(
 p_input.SDO_ORDINATES(int_len - 2)
 ,p_input.SDO_ORDINATES(int_len - 1)
 ,NULL
 ,p_input.SDO_ORDINATES(int_len)
 ,p_input.SDO_SRID
 ELSIF int_dims = 3
 AND int_lrs = 0
 THEN
 RETURN fast_point(
 p_input.SDO_ORDINATES(int_len - 2)
 ,p_input.SDO_ORDINATES(int_len - 1)
 ,p_input.SDO_ORDINATES(int_len)
 ,NULL
 ,p_input.SDO_SRID
 ELSIF int_dims = 4
 AND int_lrs IN (4,0)
 THEN
 RETURN fast_point(
 p_input.SDO_ORDINATES(int_len - 3)
 ,p_input.SDO_ORDINATES(int_len - 2)
 ,p_input.SDO_ORDINATES(int_len - 1)
 ,p_input.SDO_ORDINATES(int_len)
 ,p_input.SDO_SRID
 ELSIF int_dims = 4
 AND int_lrs = 3
 THEN
 RETURN fast_point(
 p_input.SDO_ORDINATES(int_len - 3)
 ,p_input.SDO_ORDINATES(int_len - 2)
 ,p_input.SDO_ORDINATES(int_len)
 ,p_input.SDO_ORDINATES(int_len - 1)
 ,p_input.SDO_SRID
 ELSE
 RAISE_APPLICATION_ERROR(-20001,'ERR!');
 END IF;
 END get_end_point;
 FUNCTION is_spaghetti(
 p_input IN MDSYS.SDO_GEOMETRY
 ,p_tolerance IN NUMBER DEFAULT 0.05
 ) RETURN VARCHAR2
 AS
 num_tolerance NUMBER := p_tolerance;
 ary_strings MDSYS.SDO_GEOMETRY_ARRAY := MDSYS.SDO_GEOMETRY_ARRAY();
 ary_starts MDSYS.SDO_GEOMETRY_ARRAY := MDSYS.SDO_GEOMETRY_ARRAY();
 ary_ends MDSYS.SDO_GEOMETRY_ARRAY := MDSYS.SDO_GEOMETRY_ARRAY();
 int_count PLS_INTEGER;
 ary_start_count MDSYS.SDO_NUMBER_ARRAY := MDSYS.SDO_NUMBER_ARRAY();
 ary_end_count MDSYS.SDO_NUMBER_ARRAY := MDSYS.SDO_NUMBER_ARRAY();
 ary_inside_count MDSYS.SDO_NUMBER_ARRAY := MDSYS.SDO_NUMBER_ARRAY();
 BEGIN
 -- Step 10
 -- Check over incoming parameters
 IF p_input IS NULL
 THEN
 RETURN NULL;
 ELSIF p_input.get_gtype = 2
 THEN
 RETURN 'FALSE';
 ELSIF p_input.get_gtype <> 6
 THEN
 RAISE_APPLICATION_ERROR(-20001,'input gtype must be 2 or 6');
 END IF;
 IF num_tolerance IS NULL
 THEN
 num_tolerance := 0.05;
 END IF;
 -- Step 20
 -- Break multistring into single linestrings with nodes
 int_count := SDO_UTIL.GETNUMELEM(p_input);
 ary_strings.EXTEND(int_count);
 ary_starts.EXTEND(int_count);
 ary_ends.EXTEND(int_count);
 ary_start_count.EXTEND(int_count);
 ary_end_count.EXTEND(int_count);
 ary_inside_count.EXTEND(int_count);
 FOR i IN 1 .. int_count
 LOOP
 ary_strings(i) := SDO_UTIL.EXTRACT(p_input,i);
 ary_starts(i) := get_start_point(ary_strings(i));
 ary_ends(i) := get_end_point(ary_strings(i));
 END LOOP;
 -- Step 30
 -- Loop through and count the nodes connections
 FOR i IN 1 .. int_count
 LOOP
 ary_start_count(i) := 0;
 ary_end_count(i) := 0;
 ary_inside_count(i) := 0;
 FOR j IN 1 .. int_count
 LOOP
 IF i != j
 THEN
 IF SDO_GEOM.RELATE(
 ary_starts(i),
 'DETERMINE',
 ary_strings(j),
 num_tolerance
 ) IN ('TOUCH','CONTAINS','COVERS','ON')
 THEN
 ary_start_count(i) := ary_start_count(i) + 1;
 ELSIF SDO_GEOM.RELATE(
 ary_ends(i),
 'DETERMINE',
 ary_strings(j),
 num_tolerance
 ) IN ('TOUCH','CONTAINS','COVERS','ON')
 THEN
 ary_end_count(i) := ary_end_count(i) + 1;
 ELSIF SDO_GEOM.RELATE(
 ary_strings(i),
 'DETERMINE',
 ary_strings(j),
 num_tolerance
 ) IN ('TOUCH','CONTAINS','COVERS','OVERLAPBYINTERSECT')
 THEN
 ary_inside_count(i) := ary_inside_count(i) + 1;
 END IF;
 END IF;
 END LOOP;
 IF ary_start_count(i) > 1
 OR ary_end_count(i) > 1
 OR ary_inside_count(i) > 0
 THEN
 RETURN 'TRUE';
 END IF;
 END LOOP;
 RETURN 'FALSE';
 END is_spaghetti;
 FUNCTION points2segment(
 p_point_one IN MDSYS.SDO_POINT_TYPE
 ,p_point_two IN MDSYS.SDO_POINT_TYPE
 ,p_srid IN NUMBER
 ) RETURN MDSYS.SDO_GEOMETRY
 AS
 BEGIN
 IF ( p_point_one.Z IS NULL AND p_point_two.Z IS NOT NULL )
 OR ( p_point_one.Z IS NOT NULL AND p_point_two.Z IS NULL )
 THEN
 RAISE_APPLICATION_ERROR(
 -20001,
 'both points must have the same number of dimensions, point_one Z is ' ||
 NVL(TO_CHAR(p_point_one.Z),'') ||
 ' and point_two Z is ' ||
 NVL(TO_CHAR(p_point_two.Z),'')
 END IF;
 IF p_point_one.Z IS NULL
 THEN
 RETURN SDO_GEOMETRY(
 2002
 ,p_srid
 ,NULL
 ,SDO_ELEM_INFO_ARRAY(1,2,1)
 ,SDO_ORDINATE_ARRAY(p_point_one.X,p_point_one.Y,p_point_two.X,p_point_two.Y)
 ELSE
 RETURN SDO_GEOMETRY(
 3002
 ,p_srid
 ,NULL
 ,SDO_ELEM_INFO_ARRAY(1,2,1)
 ,SDO_ORDINATE_ARRAY(p_point_one.X,p_point_one.Y,p_point_one.Z,p_point_two.X,p_point_two.Y,p_point_two.Z)
 END IF;
 END points2segment;
 FUNCTION points2segment(
 p_point_one IN MDSYS.SDO_GEOMETRY
 ,p_point_two IN MDSYS.SDO_GEOMETRY
 ) RETURN MDSYS.SDO_GEOMETRY
 AS
 int_gtype1 PLS_INTEGER;
 int_dims1 PLS_INTEGER;
 int_gtype2 PLS_INTEGER;
 int_dims2 PLS_INTEGER;
 point_one MDSYS.SDO_POINT_TYPE;
 point_two MDSYS.SDO_POINT_TYPE;
 BEGIN
 int_gtype1 := p_point_one.get_gtype();
 int_dims1 := p_point_one.get_dims();
 int_gtype2 := p_point_two.get_gtype();
 int_dims2 := p_point_two.get_dims();
 IF int_gtype1 = 1
 AND int_gtype2 = 1
 AND int_dims1 = int_dims2
 AND p_point_one.SDO_SRID = p_point_two.SDO_SRID
 THEN
 NULL; -- Good
 ELSE
 RAISE_APPLICATION_ERROR(
 -20001
 ,'both point objects must be points and have the same number of dimensions and SRIDs'
 END IF;
 IF int_dims1 = 4
 THEN
 RETURN SDO_GEOMETRY(
 4402
 ,p_point_one.SDO_SRID
 ,NULL
 ,SDO_ELEM_INFO_ARRAY(1,2,1)
 ,SDO_ORDINATE_ARRAY(
 p_point_one.SDO_ORDINATES(1)
 ,p_point_one.SDO_ORDINATES(2)
 ,p_point_one.SDO_ORDINATES(3)
 ,p_point_one.SDO_ORDINATES(4)
 ,p_point_two.SDO_ORDINATES(1)
 ,p_point_two.SDO_ORDINATES(2)
 ,p_point_two.SDO_ORDINATES(3)
 ,p_point_two.SDO_ORDINATES(4)
 ELSE
 -- Use the sdo_point_type method for the rest
 IF p_point_one.SDO_POINT IS NOT NULL
 THEN
 point_one := p_point_one.SDO_POINT;
 ELSE
 IF int_dims1 = 3
 THEN
 point_one := SDO_POINT_TYPE(
 p_point_one.SDO_ORDINATES(1)
 ,p_point_one.SDO_ORDINATES(2)
 ,p_point_one.SDO_ORDINATES(3)
 ELSE
 point_one := SDO_POINT_TYPE(
 p_point_one.SDO_ORDINATES(1)
 ,p_point_one.SDO_ORDINATES(2)
 ,NULL
 END IF;
 END IF;
 IF p_point_two.SDO_POINT IS NOT NULL
 THEN
 point_two := p_point_two.SDO_POINT;
 ELSE
 IF int_dims1 = 3
 THEN
 point_two := SDO_POINT_TYPE(
 p_point_two.SDO_ORDINATES(1)
 ,p_point_two.SDO_ORDINATES(2)
 ,p_point_two.SDO_ORDINATES(3)
 ELSE
 point_two := SDO_POINT_TYPE(
 p_point_two.SDO_ORDINATES(1)
 ,p_point_two.SDO_ORDINATES(2)
 ,NULL
 END IF;
 END IF;
 RETURN points2segment(
 p_point_one => point_one
 ,p_point_two => point_two
 ,p_srid => p_point_one.SDO_SRID
 END IF;
 END points2segment;
 FUNCTION linear_gap_filler(
 p_input IN MDSYS.SDO_GEOMETRY
 ,p_tolerance IN NUMBER DEFAULT 0.05
 ) RETURN MDSYS.SDO_GEOMETRY
 AS
 sdo_input MDSYS.SDO_GEOMETRY := p_input;
 num_tolerance NUMBER;
 int_counter PLS_INTEGER;
 ary_edges MDSYS.SDO_GEOMETRY_ARRAY;
 ary_starts MDSYS.SDO_GEOMETRY_ARRAY;
 ary_ends MDSYS.SDO_GEOMETRY_ARRAY;
 ary_nearest MDSYS.SDO_NUMBER_ARRAY;
 ary_distance MDSYS.SDO_NUMBER_ARRAY;
 num_temp NUMBER;
 num_nearest NUMBER;
 int_winner PLS_INTEGER;
 int_winner2 PLS_INTEGER;
 sdo_point1 MDSYS.SDO_GEOMETRY;
 sdo_point2 MDSYS.SDO_GEOMETRY;
 boo_done BOOLEAN;
 num_one NUMBER;
 num_two NUMBER;
 int_looper PLS_INTEGER := 1;
 BEGIN
 -- Step 10
 -- Check over incoming parameters
 IF num_tolerance IS NULL
 THEN
 num_tolerance := 0.05;
 END IF;
 IF sdo_input IS NULL
 OR sdo_input.get_gtype() <> 6
 THEN
 RETURN sdo_input;
 END IF;
 IF is_spaghetti(sdo_input,p_tolerance) = 'TRUE'
 THEN
 RETURN sdo_input;
 END IF;
 <> ary_edges := MDSYS.SDO_GEOMETRY_ARRAY();
 ary_starts := MDSYS.SDO_GEOMETRY_ARRAY();
 ary_ends := MDSYS.SDO_GEOMETRY_ARRAY();
 ary_nearest := MDSYS.SDO_NUMBER_ARRAY();
 ary_distance := MDSYS.SDO_NUMBER_ARRAY();
 -- Step 20
 -- Break multistring into edges and start and end nodes
 int_counter := SDO_UTIL.GETNUMELEM(sdo_input);
 ary_edges.EXTEND(int_counter);
 ary_starts.EXTEND(int_counter);
 ary_ends.EXTEND(int_counter);
 FOR i IN 1 .. int_counter
 LOOP
 ary_edges(i) := SDO_UTIL.EXTRACT(sdo_input,i);
 ary_starts(i) := get_start_point(ary_edges(i));
 ary_ends(i) := get_end_point(ary_edges(i));
 END LOOP;
 -- Step 30
 -- Determine the closest endpoints
 ary_nearest.EXTEND(int_counter);
 ary_distance.EXTEND(int_counter);
 FOR i IN 1 .. int_counter
 LOOP
 num_nearest := NULL;
 int_winner := NULL;
 FOR j IN 1 .. int_counter
 LOOP
 IF j != i
 THEN
 num_temp := SDO_GEOM.SDO_DISTANCE(
 ary_edges(i)
 ,ary_edges(j)
 ,num_tolerance
 IF num_nearest IS NULL
 OR num_temp < num_nearest
 THEN
 num_nearest := num_temp;
 int_winner := j;
 END IF;
 END IF;
 END LOOP;
 ary_nearest(i) := int_winner;
 ary_distance(i) := num_nearest;
 END LOOP;
 -- Step 40
 -- Find the smallest gap
 int_winner := NULL;
 num_nearest := NULL;
 FOR i IN 1 .. int_counter
 LOOP
 IF num_nearest IS NULL
 OR ary_distance(i) < num_nearest
 THEN
 int_winner := i;
 num_nearest := ary_distance(i);
 int_winner2 := ary_nearest(i);
 END IF;
 END LOOP;
 -- Step 50
 -- Determine the endpoints to connect
 num_one := SDO_GEOM.SDO_DISTANCE(
 get_start_point(ary_edges(int_winner)),
 ary_edges(int_winner2),
 num_tolerance
 num_two := SDO_GEOM.SDO_DISTANCE(
 get_end_point(ary_edges(int_winner)),
 ary_edges(int_winner2),
 num_tolerance
 IF ( num_one = 0 AND SDO_GEOM.RELATE(
 get_start_point(ary_edges(int_winner)),
 'ANYINTERACT',
 ary_edges(int_winner2),
 num_tolerance
 ) = 'TRUE' )
 OR ( num_two = 0 AND SDO_GEOM.RELATE(
 get_end_point(ary_edges(int_winner)),
 'ANYINTERACT',
 ary_edges(int_winner2),
 num_tolerance
 ) = 'TRUE' )
 THEN
 sdo_point1 := NULL;
 ELSIF num_one < num_two
 THEN
 sdo_point1 := get_start_point(ary_edges(int_winner));
 ELSE
 sdo_point1 := get_end_point(ary_edges(int_winner));
 END IF;
 num_one := SDO_GEOM.SDO_DISTANCE(
 get_start_point(ary_edges(int_winner2)),
 ary_edges(int_winner),
 num_tolerance
 num_two := SDO_GEOM.SDO_DISTANCE(
 get_end_point(ary_edges(int_winner2)),
 ary_edges(int_winner),
 num_tolerance
 IF ( num_one = 0 AND SDO_GEOM.RELATE(
 get_start_point(ary_edges(int_winner2)),
 'ANYINTERACT',
 ary_edges(int_winner),
 num_tolerance
 ) = 'TRUE' )
 OR ( num_two = 0 AND SDO_GEOM.RELATE(
 get_end_point(ary_edges(int_winner2)),
 'ANYINTERACT',
 ary_edges(int_winner),
 num_tolerance
 ) = 'TRUE' )
 THEN
 sdo_point2 := NULL;
 ELSIF num_one < num_two
 THEN
 sdo_point2 := get_start_point(ary_edges(int_winner2));
 ELSE
 sdo_point2 := get_end_point(ary_edges(int_winner2));
 END IF;
 -- Step 50
 -- Smash together
 IF sdo_point1 IS NULL
 OR sdo_point2 IS NULL
 THEN
 sdo_input := SDO_UTIL.CONCAT_LINES(
 ary_edges(int_winner),
 ary_edges(int_winner2)
 ELSE
 sdo_input := SDO_UTIL.CONCAT_LINES(
 SDO_UTIL.CONCAT_LINES(
 ary_edges(int_winner),
 points2segment(sdo_point1,sdo_point2)
 ary_edges(int_winner2)
 END IF;
 boo_done := TRUE;
 FOR i IN 1 .. int_counter
 LOOP
 IF i NOT IN (int_winner,int_winner2)
 THEN
 sdo_input := SDO_UTIL.APPEND(sdo_input,ary_edges(i));
 boo_done := FALSE;
 END IF;
 END LOOP;
 -- Step 60
 -- Check if valid if returning
 IF sdo_input.get_gtype() = 2
 OR boo_done = TRUE
 THEN
 RETURN sdo_input;
 END IF;
 int_looper := int_looper + 1;
 GOTO TOP_OF_IT;
 END linear_gap_filler;
END dz_gap_fill;

Geometry objects and Applets

hello,
I'm writing a servlet which should pass a Geometry object to an applet. The problem is that the applet
getParameter method doesn't seem to work with Geometry objects. Can anyone suggest anything please ?
Here's the code I was using in the applet access the Geometry object:
Geometry geom = (Geometry)getParameter("geomObject");
Thanks in advance,
Trish.

What do you mean by this "PO number should open in workbench"?
Do you want the PO transaction to open? Or what is this "workbench"?
If you want to display the PO, you can try the following:
- Most likely you have the PO business object BUS2012 in the workflow container (check this in SWDD)
- Bind this object from the WF container to the user decision step/task (into the "_Adhoc_Objects" container element)
-Now you will have the PO object as an attachment in the work item, and when you click it in business workplace, the purchasing document should open
-Please make sure to start new workflow after your changes, since your changes will not have an effect to the old WF instances.
Regards,
Karri

How to include objects of a z* package into a single request

Hi Gurus,
The requirement is I need to include all the objects in a z*package into one single request.One way is I find out latest version of each program and include it in request.But there are some 200 objects in the package.Is there any simple way to do it , I mean is there any option wherein I type the package name and all programs get included in the request..........
Helpful answers will be rewarded
Regards,
Raghu.

Please try this ..
Goto SE09 ..
Create a transport request ...
Delete the sub-task ..
Now place cursor on main task(request)
click on Include objects(Ctrl+F11)
In the popup check 'Freely selected objects' radio button .. click Ok
Enter the package name ... and any other parameters .. and F8 ..
This will include all the objects in the particular package selected ..
Then release the task ...

Multiple objects into single emitter-possible??

Is it possible to have multiple objects turned into a single emitter to set different ranges, life, scales, etc.? Specifically, I have about two dozen text words I'd like to be able to turn into a single emitter as opposed to doing a separate one for each...thanks for any help!
~Chris

New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick

Ora-13033 Invalid data in the sdo_elem_info_array in sdo geometry object

Hi,
I am getting this error when I am creating spatial index on geometry.
I suspect I have some problem with some rows of my geometry data. I have identified and fixed these problems so far. but I still getting error on spatial index creation.
-emptry Gtype in some rows
-wrong Gtype in some rows
Complete Error.
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: mdidxrbd
ORA-13249: iError in Spatial Index: index build fialed
ORA-13200: Internal error RowID:AAANZE/AAFAAALFaAAP..... in spatial indexing
ORA-13206: internal error [] while creating the spatial index
ORA-13033: Invalid data in the sdo_elem_info_array in sdo geometry object
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 10
I have line data for this table and below is the sample data.
GEOMETRY(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELEM_INFO, SDO_ORDINATES)
SDO_GEOMETRY(2002, 2958, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(
598520.994, 4837106.63, 598462.359, 4837164.63))
SDO_GEOMETRY(2002, 2958, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(
599229.43, 4837127.13, 599089.675, 4837264.62))
SDO_GEOMETRY(2002, 2958, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(
599280.002, 4837024.46, 599295.689, 4837048.09, 599296.21, 4837055.13, 599294.64
5, 4837062.43, 599229.43, 4837127.13))
SDO_GEOMETRY(2002, 2958, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(
GEOMETRY(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELEM_INFO, SDO_ORDINATES)
599089.675, 4837264.62, 599028.567, 4837324.34))
SDO_GEOMETRY(2002, 2958, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(
595925.144, 4839146.42, 596002.765, 4839128.11, 596007.989, 4839126.85, 596013.5
22, 4839123.09, 596056.926, 4839089.74, 596100.769, 4839065.62, 596106.694, 4839
063.81, 596110.438, 4839064.27, 596115.548, 4839066.47, 596181.122, 4839135.22,
596183.623, 4839140.59, 596183.706, 4839145.03, 596183.319, 4839148.15, 596181.1
78, 4839152.64, 596174.794, 4839163.26, 596165.136, 4839174.75, 596143.191, 4839
194.57))
Please also note that I have correct dimension in "sdo user geom meta data" table and in my table.
Any help is greatly appreciated.
Rose

Hi Rose
If you take a look at the error message, you will find a line there that starts with ORA-13200
ORA-13200: Internal error RowID:AAANZE/AAFAAALFaAAP
This points to the ROW containing the geometry that triggers this error (described in the error message).
So if you could post the geometry of that specific row that might help. Use the following sql statement:
Select geometry from YOUR_TABLE_NAME WHERE ROWID = 'AAANZE/AAFAAALFaAAP';
tx
Luc

How to use OO40 to read geometry objects ??????????

How to use OO4O to read & write geometry objects?

What is OO4O ?
Joel P�rez

How to display results set of multiple reports into a single report table

Our goal is to create a single report (or dashboard) that shows the "funnel" of object creations related to each campaign. The flow goes from Activity to Lead to Opportunity as well as multiple steps within each (ie. Unqualified Lead -> Qualified Lead, etc).
We currently have 3 separate reports in three different subject areas, each reporting the different metrics and we would like to combine the output into a single Unified report.
For example what we currently have is:
Activities:
Campaign Name # of Activities
Campaign A 12
Campaign B 26
Leads:
Campaign Name # of Leads # of Qualified Leads
Campaign A 10 4
Campaign B 20 18
Opportunities:
Campaign Name # of Opportunities # of Opps per Sales Stage ... # of Wins Closed Revenue
Campaign A 3 2 1 $1,000.00
Campaign B 10 8 3 $2,800.00
What we want to see is:
Combined:
Campaign Name - Campaign Cost - # of Activities - # of Leads - # of Qualified Leads - # of Opportunities - # of Opps per Sales Stage - # of Wins - Closed Revenue
Campaign A - $423.00 - 12 - 10 - 4 - 3 - 2 - 1 - $1,000.00
Campaign B - $ 1,000.00 - 26 - 20 - 18 - 10 - 8 - 3 - $2,800.00
We have tried using the "Combine with similar analysis" but the number of columns for each subject area differ. We also tried creating multiple UNION criteria (one for each column), but in the case of # of Opps per Sales Stage and Closed Revenue, those are not "Metrics" fields, so they won't combine.

Hi, You may have to create some dummy fields to equate the no. of field in each of the report matching the data type too and get a one single report using combined analytics and then using the resultant data you can create a simple pivot like below. Haven't tried it before
-- Venky CRMIT
Hi Venky,
I am facing the same problem. Can you please say Steps how to create resultant data and Combine in pivot Table .
Please Help me .
Thanks in Advance .
My mail id is :
[email protected]

How to copy Two universes into a Single universe

Hi ,
I am working on SAP BO 3.1 Designer ,
I have three universes namely A,B& C which are pointing to same data base and with the same connection
now I would like to combine the universes
can u please suggest me on this..
I would like to have the components of Universe A & B. in universe C..
Thanks In Advance..

Hi,
I think, you are asking for the linking of multiple universes into a single universe and this is compatible with SAP BO 3.1 Designer
Steps to Link Multiple Universes to a Single Universe with same Database and Connection
1. Create a Universe A (for instance) with proper parameters mentioning the Database and Valid Connections
2. Go to File >> Parameters >> Links tab and then Click Add Link
3. Then point the Universe B you wish to link
4. Similarly add a link to the other Universe C and then export the the Universe after saving to the repository.
** These universes are dynamically linked to the universe and the Objects, classes will be made available.
Thanks and Regards,
Arul Frances S

Merge Different Spools containing a Single PDF page into a Single PDF file.

Greetings,
I am developing a custom object where in i need to read PDF file from many different Spools(Range given on Input Screen), where each spool has a single PDF page in it. I need to combine all these PDF Pages into a single PDF file & either create a new Spool or save it on an Application Server.
At present i have developed the code where in i am able to read the PDF files from different spools & convert them into Binary but i am not able to generate it back to PDF file.
Kindly find my code for your reference.
CODE:-
START-OF-SELECTION.
PERFORM f_get_spool_1000 .
PERFORM g_conv_pdf_to_bin_2000 .
*& Form F_GET_SPOOL_1000
 text
FORM f_get_spool_1000 .
SELECT * FROM tsp01
 INTO TABLE gt_tsp01
 WHERE rqident IN s_spool
 ORDER BY rqcretime DESCENDING.
IF sy-subrc = 0.
 SORT gt_tsp01 BY rqident .
ENDIF.
ENDFORM.
*& Form G_CONV_PDF_TO_OTF_2000
 text
DATA: lv_filename_out TYPE string,
 lv_len TYPE i,
 lt_tab TYPE tsfixml .
DATA: lwa_print_parms LIKE pri_params,
 lv_valid(1) TYPE c .
DATA: lv_linsz LIKE sy-linsz VALUE 132, " Line size
 lv_paart LIKE sy-paart VALUE 'X_65_132'. " Paper Format
DATA : lt_tsp01 TYPE STANDARD TABLE OF tsp01 ,
 lwa_tsp01 TYPE tsp01 .
CLEAR : gv_pdf, gwa_tsp01, gv_renderpagecount .
LOOP AT gt_tsp01 INTO gwa_tsp01.
 CALL FUNCTION 'FPCOMP_CREATE_PDF_FROM_SPOOL'
 EXPORTING
 i_spoolid = gwa_tsp01-rqident
 i_partnum = 1
 IMPORTING
 e_pdf = gv_pdf
 e_renderpagecount = gv_renderpagecount
 e_pdf_file = gv_pdf_file
 EXCEPTIONS
 ads_error = 1
 usage_error = 2
 system_error = 3
 internal_error = 4
 OTHERS = 5.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
 CLEAR lv_len .
 REFRESH gt_bin .
 CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
 EXPORTING
 buffer = gv_pdf
 IMPORTING
 output_length = lv_len
 TABLES
 binary_tab = gt_bin.
 CLEAR gwa_bin .
 LOOP AT gt_bin INTO gwa_bin.
 APPEND gwa_bin TO gt_listout.
 CLEAR gwa_bin .
 ENDLOOP.
ENDLOOP.
Get FP reference
DATA: lo_fp TYPE REF TO if_fp VALUE IS INITIAL,
 lo_pdfobj TYPE REF TO if_fp_pdf_object VALUE IS INITIAL,
 lo_exc TYPE REF TO cx_root,
 lv_xslt_message TYPE string .
lo_fp = cl_fp=>get_reference( ).
For handling exceptions
DATA: lo_fpex TYPE REF TO cx_fp_runtime VALUE IS INITIAL.
TRY.
 lo_pdfobj = lo_fp->create_pdf_object( connection = 'ADS' ).
Set document
 lo_pdfobj->set_document(
 EXPORTING
 pdfdata = gt_listout ).
Tell PDF object to extract data
 lo_pdfobj->set_extractdata( ).
Execute the call to ADS
 lo_pdfobj->execute( ).
 CATCH cx_root INTO lo_exc.
 lv_xslt_message = lo_exc->get_text( ).
ENDTRY.
Your quick reply would be of great help.
Regards.

Thank Your for your concern, there are many replies & posts but all of them points only to Try what they have said. As being said that trying to convert PDF to binary & appending many PDF similarly would not let you generate a single PDF again.
Your Kind guidance would be really appreciable.
Regards.

Displaying data from multiple columns into a single line graph

Post Author: hollowmatrix
CA Forum: WebIntelligence Reporting
Hey,I have an issue with the WEBI reporting.I have a data source that has multiple columns say ( month1, month2, month3, month4,.....month 12, month 13, ....month24) with the sales data for each month.Now say I call the month 1 to month 12 as "current year", and call month 13 - month 24 as "previous year".I want to put a prompt in the report which allows me to select between "current year" and "previous year".Based on the prompt value we get a graph of the sales vs month ....as in if we select "current year", then we get a graph of the sales Vs time( remember that the sales data for each month is in a different column.)and if we select "previous year" then we get a graph of the sales Vs time for previous year..( sales vs time for Month 13, month 14, month 15....month 24).I am not able to pull data from multiple columns into a single object that I can use to populate the graphs.Any help on the same will be appreciated .

Hi,

please click
here (asktom) and look for the words "how about the other way round"

Help needed -- Considerations to be taken while migrating 2 different SCCM 2007 hierarchies into a single SCCM 2012 Hierarchy.

Hi, I need your help on consolidating two different SCCM 2007 infrastructures into a single SCCM 2012.
We have two different SCCM 2007 Hierarchies, Lets say 123 and ABC
About 123 SCCM 2007 -- On 123 Hierarchy, we have already started migrating clients from SCCM 2007 to SCCM 2012.
About ABC SCCM 2007 -- On ABC Hierarchy, This is still running on SCCM 2007 (This hierarchy only be started migrating once we
are completed migration on 123)
Out of which, we have few co located offices across the globe for both 123 and ABC. Now we are decided to replace the hardware on all these locations by removing the existing two servers (one for 123 and other for ABC,with two different Forest and domains),
and consolidate them into a single server.how can we plan/design to ensure that we covering both hierarchies SCCM clients for the operations.
===================Below are some possibilities we are discussing on================================
1.Is there any way on "System management" in AD to enable access either in 123's domain or ABC's domain.
2.Since we are planning to replace the hardware with Server 2012 R2 with Hyper-V, Create two instances and migrate 123 hierarchy to SCCM 2012 and other instance will serve ABC until we start the migration on this.
========================================================================================
correct me, If i am in wrong direction. Please suggest me the best of doing it. Thanks in advance.
srkr

1) In CM 2012 you can publish data to System Management in other forest but you have to configure the permissions manually and create the forest object in the ConfigMgr console.
2) CM07 and CM2012 instances can co-exist as long as you don't create boundary groups in CM12 for site assignment (that will cause overlapping boundaries if you still have boundaries in Cm07)
Kent Agerlund | My blogs: blog.coretech.dk and
SCUG.DK | Twitter: @Agerlund | Linkedin:
Kent Agerlund

Muliple Geometry Objects into a Single geometry

Similar Messages

Maybe you are looking for