Mulitcam with more than 4 cams?

i am about to shoot a live music concert with 9 cams.
will also shoot a rehearsal, with 8 or 9 cams.
the show is almost 2 hours long.
i did this last year and manually edited 18 tracks of video, took a long time, but looked nice.
anyone done a multicam edit with more than 4 cams?
is there a plugin for premiere that does more than 4?
i have premiere pro CS3 for mac and PC.
thanks!

Directly, PPro can only edit from four sources. However, you might check out
this Creative Cow tutorial about setting up multiple multicam sequences. Might save you at least a little bit of time.

Similar Messages

Anyone with more than one iPhone 6/6+ in same order getting there phones shipped if all your phones didn't have 9-19 when you ordered?

Our Verizon account has 10 lines and I figure we're paying over $7,000 a year, when I think of how much money total we have payed to Verizon only to be jerked around and around and lied too over and over again really does make me sick. 6 of these contracts have ended and 3 will be up in next couple months and 1 has a year left so the cancelation fees would not be that bad. And with the other big carrier I've heard it might be cheaper on monthly service. All I wanted from Verizon was for them to do whats right.
I Ordered
iPhone 6 16gb gray
iPhone 6+ 16gb gray
iPhone 6+ 64gb gray
iPhone 6+ 64gb silver
all on the same order. I finished at 3:19 am est and got a date of 10/14 even though all the phones except the 6+ 16 gb gray had 9/19. Got confirmation email at 4:56 will ship by 10/14 I got worried that all the phones would not ship till 10/14 and contacted verizon thru facebook messenger. They told me my phones would ship in the order received and not be held up by a phone that wasn't available in my order. And based on the time of my order she said 9/19 for the 6 and 6+ silver, 10/7 for the 6+ 64 gray , 10/14 for 6+ 16 gray. On Monday morning my status changed to 9/19:):) in the afternoon in changed to unknown. I called 611 and rep went thru all my phones with a time sheet she had and said i should get all but the 6+ 16 gray on 9/19, she said that one you had to order by 3:00 to get on 9/19. On Wednesday my status changed to 10/14 , called 611 again and this lady told me all my phones had 10/14 listed after them. She told me she didn't know what to tell me that Apple ships the phones and its out of Verizon's hands because they don't have the phones. then she told me to call Apple (and gave me the phone # ) and see if they ship preorders with more than 1 in a order when their available or wait till all are. I called them ( they laughed that Verizon had me call them) and they don't hold up orders . Called customer service back and guy said at least 10 times ....I ASSURE YOU VERIZON WILL NOT HOLD YOUR PHONES!!! i said of course they're not actually putting them in a box and waiting for all, they're sending them to other people who ordered after me. I asked him if my order could be separated/ rebuilt and do a (jump the line request) so i could get my phones when i should. He said there is no such thing at verizon....he has worked there many years and if there was he would know. Someone posted # to Internet orders so i called them Thursday morning, spoke to a very nice guy he said my phones that i should get i would and i should get an e-mail later that day and if i didnt get anything by 8:00 pm to call back. Before we hung up i asked if I didn't get anything did he know if they could cancel/separate/rebuild and do jump the line, he said they can do that and put me on hold while he spoke with a supervisor, he came back and said if nothing happened that day they would do that with my order. I got nothing, called Internet orders back at 8:30pm... went thru my history and asked them to do the rebuild. She transferred me to supervisor who REFUSED to rebuild my order, that is only for orders that have a technical error. She was also the first person from Verizon to tell me that they DO NOT ship orders in multiple shipments, they will only send when everything is available. She then said your order was given a delivery date of before 10/14 and that's when you'll get all your phones. I let her know that there is nothing about that confirmation that tells me that the phones that I ordered that had 9/19 deliver by dates would not be delivered then, 9/19 is before 10/14.

Same thing happened to me!!! They made a shady business move and they should be ashamed. Placed a pre-order for an Phone 6 and an iPhone 6 Plus at 2 AM on the 12th and got my pre-order in line just like everyone else did that morning. The 6 said delivery by 9/19 and the Plus was already back ordered to 10/7 but that's fine, I expected the Plus to be harder to get anyway. Being that both phones were eligible it made sense to just place one order given this hasn't been an issue in the past. However, Verizon moved my iPhone 6 pre-order delivery to coincide with the back ordered Plus so they don't have to ship each phone separately!!! I have to wait for something on backorder while the other is ready so they can save on shipping cost. I expected the one that I pre-ordered IN TIME FOR A 9/19 delivery and waited my turn "in (on)line" like everyone else I should get that when it told me that in the checkout, THEN send the Plus when it becomes available. I even have the confirmation email that says "Deliver by 9/19"!!! Every company you order from sends you the backorder item when it becomes in stock, they don't wait and hold the entire order for it. WHAT A BUNCH OF CRAP!!!

Using more than one camera at the same time..

Hello every body..
I have a problem with dealing with java media frame work and i want to solve the problem as fast as i can since it will delay my work..
I hope that any one can hep me..
I post this problem previous but i don't have agood answer i want to knew if this problem can be soved or not and if can be solved How???
The problem:
If any one use JMF Studio it is known that any one can captre any device connected such as ( camera , mic,...) using JMFStudio..
I do the capturing very well but the problem i face it is HOW I CAN CONFIGURE MORE THAN ONE CAMERA AT THE JMF??
If i connect 2-cameras from different types ( sony , web cam) then the jmf registary will register the 2-cameras with only one difinition is( vfw:Microsoft WDM Image Capture (Win32):0 ) so when i use the java code to access the 2-cameras then i found only one difinition for one camera and i can access only one camera!!!!!!!!!
I don't know how i can solve this problem??
please help me !!
For reply or any information contact me at my e-mail
[email protected]

Please Help me .....!!!!
If the Sun Community Forums don't Help me who will help me at my problem??????!!!!!
Help Me!!1

WVC54GCA Monitoring Camera software (more than 9 cameras at one time)

Can you view more than 9 cameras at one time using a WVC54GCA cameras? Current software only allows for a max of 9 cameras
Is there any other software out there?
Thanks
Mario
Solved!
Go to Solution.

With the Linksys Camera Utility you have a Limitation of viewing of only 9 cameras at a time. If you wish to view more then 9 camera then you can try to download the Camera viewing software which will do that work for you. In this case you need to Google around and you will find a Camera software which will solve your purpose.

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Can I use a magic trackpad with more than one Mac at a time?

I am attempting to pair a MTP with a second MacBook Pro. So far I can't get system preferences to find the MTP.
I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac. To do this, you first remove the existing pairing and then pair the trackpad again'.
Can anyone advise, please?
If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
Thanks

Yes, your keyboard, mouse or trackpad can be paired with multiple Macs. You can even have multiple keyboards, mice or trackpads paired with one Mac. The caveat is that the device can only be connected to one Mac at a time. The device can't be paired or connected with a Mac while it's currently connected to another.
Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other. The device will connect with the first available paired Mac and then unavailable to the second. If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on. I do this with a keyboard from my iMac to a Mac Mini in another room.
Captfred

Error while running spatial queries on a table with more than one geometry.

Hello,
I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
We are running Oracle Standard 11.1.0.7.0.
Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
What this script does:
1. Create table object1 with two geometry columns, geom1, geom2.
2. Create metadata (projected coordinate system).
3. Insert a row.
4. Create spacial indices on both columns.
5. Run a SDO_RELATE query on one column. Everything is fine.
6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
7. Clean.
CREATE TABLE object1
id NUMBER PRIMARY KEY,
geom1 SDO_GEOMETRY,
geom2 SDO_GEOMETRY
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM1',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM2',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
DROP INDEX object1_geom1_sidx;
DROP INDEX object1_geom2_sidx;
DROP TABLE object1;
Thanks for help.

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

Finding of materials in scheduling agreement with more than 150 lines

Dear Experts,
we are in need to find materials in scheduling agreement with more than 150 lines. In standard SAP, materials can be searched only based on item Nos. is there a way we can search by material in ME38. also we noticed that find icon is greyed out in ME38.
Please suggest.
One more request is, to create an uplaod program for maintaining delivery schedules for multiple SAs.
please sugegst if this is feasible.
Regards
Raghavendra MS
9886138875

I am also curious if anyone has found a solution to this problem.
We routinely have scheduling agreements that are hundreds of line items. Users find it difficult to find the line item they wish to work with. It would be helpful if we could search by material number or sort the line items by material.
As Raghavendra mentioned (ctrl+F) functionality is not available in ME33L or ME38.
Thanks.

Send email from SAP with more than one attachment

Hi all,
How can i send email with more than one attachment and different types of document(doc,pdf,etc.) from SAP to external?
Besr regards,
Munur

Hi,
I use :
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
the main problem with different attachemts is to genereate the packing_list.
the packing list is a kind of description of the data table... where ist the start of an image, end, size...
"Creation of the entry for the compressed attachment
        objpack-transf_bin = 'X'.                    " it could be an image
        objpack-head_num = lv_head_num_count . " inital 1 each att add 1
        objpack-head_start = 1.                     " fix
        objpack-body_start = gv_startnum.    " table with attachments 1. line one
        objpack-body_num = tab_lines.          " how many lines are in the table of attachment
        objpack-doc_size = tab_lines * 255.   " size of the attachment...
       objpack-doc_type = lv_typ . " 'JPG'.
        objpack-obj_name = 'ATTACHMENT'.
        objpack-obj_descr = lv_stripped_name " name of the JPG
   APPEND objpack.
   APPEND LINES OF lt_goscontent TO gt_maildata. " data Table...
bestreg
robert

By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

A Cloud subscription provides for installing working installations on two machines. You can have mixed operating systems (both Windows and Apple's OX).

When I import a cd with more than one artist iTunes separates each individual artist - how do I get it to show the album as a whole rather than individual artist?

When I import a cd with more than one artist itunes shows each artist's song separately and won't group the album as a whole - this is incredibly frustrating something that Windows media player doesn't do. Does anyone have a simple cure for this annoyance?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous peopl

After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous people call and ask why I didn't reply to their texts...and I look, but have not received any new texts. YES, I have restarted phone. I have cleared data as well as cache on all apps. I have downloaded the vzw messaging app, which seems silly, since it happens with several different processes and apps, but all to no avail. I am missing texts from my employer, from my family. This did happen, but rarely, before this "soak test". It is now Kitkat version 19.6.3.obake_verizon.en.US. THIS is when I started having problems...like 50 times a day kind of problems! I have seen hundreds of posts all over the internet over the past 3 days. Does no one know how to fix this??? Shouldn't there be a way to revert phone to a pre-update state? and no, hard reset did NOT work!!!! I have been with verizon for well over 15 years, but I have not upgraded my lines and will not in July either. This is ridiculous. It's not like my games aren't working, it is my messaging and "android os"...my lifeline at work!

kristinaf333,
Oh no, I am sorry to hear your messages are not working since the software update. I greatlly appreciate doing all that troubleshooting to try and get the messaging application back in business. I know how much I rely on my messages so I can understand the urgency to get this resolved. Have you had a resolution ticket opened since you started experiencing issues with your messages? Does this happen with all contacts or just some? Please provide additional information to ensure we get to the bottom of this for you.
KarenC_VZW
Follow us on Twitter @VZWSupport

I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes (or I already have) and my server won't start

I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes
(or I already have) and my server won't start.
<P>
The steps are the same whether you have already upgraded or are about to.
<P>
Calendar Server 4.0 on the Windows NT platform can only support up to nine
nodes on one server, while 3.51 supported up to 14. If you have a Calendar
Server 3.51 with more than 9 nodes that you want to upgrade to Calendar Server
4.0, Netscape recommends that you migrate the extra nodes to another Calendar
Server 3.51 on another Windows NT system. To accomplish this:
<OL>
<LI>Install Calendar Server on another Windows NT machine and configure it to
use the same directory server as your current Calendar Server.
<LI>Stop and backup your current Calendar Server.
<LI>Individually zip up the node directories you want to move to the new
server. (drive:\unsers\unison\db\Nx
where "x" is the number of the node you want to use.)
<LI>Stop the new Calendar Server.
<LI>Unzip the files into the new Calendar Server in the same place as they
were on the old server.
<LI>Edit the unison.ini
file on the new server to add the nodes you have just migrated.
<LI>Edit the unison.ini
file on the old server to remove the nodes you have moved to the new server.
<LI>Edit the nodes.ini
file on the old server to remove the nodes you just moved and then add them
with the new hostname. Keep in mind that you will only be able to modify the
node network from the old host.
<LI>Run unidbfix -export
on both servers for all nodes.
<LI>Edit the remotenodes.ini
file on both servers to reflect your node topology.
<LI>Run unidbfix -import
to import the changes into the node databases.
<LI>Run unidbfix -c,
then -f,
then -c
again on both servers for all the nodes.
<LI>If you don't get any errors, run uninode -test all
to test if your nodes connections are set properly. If they are not, <B>do not</B>
start either of the servers; instead, fix the errors and try again.
<LI>Start both servers.
<LI>Log in and check to see if you can see people on remote nodes.
<LI>Notify the users on the moved nodes of their new calendar host.
<LI>If you did this in preparation of an upgrade, you can now run the upgrade to
4.0 since both servers contain fewer than 9 nodes.
</OL>

Use Disk Utility whihc is in the Utilities Folder.
Select your Boot Disk on the left.
Select Verify Permissions
If any errors the do Reapir permissions.
You might have to repeat the process.
see this:
Steve

Can you sign in with more than one apple id on an iPad?

Can you sign in with more than one apple id on an iPad?

Only one account can be signed in at a time (via Settings > Store), and if you turn on automatic downloads and/or download past purchases from an account then you risk tying the iPad to that account for 90 days : http://support.apple.com/kb/HT4627

Why is all my icloud account linked with more than one apple id?

why is my iphone 5 merged with more than one account?

What do you mean by "merged with more than one account" and "linked with more than one Apple ID"? What exactly are you seeing on your phone?

Mulitcam with more than 4 cams?

Similar Messages

Maybe you are looking for