Mulitiple, independent animations in a single file

It seems from all the adobe help files i read, this is
possible, but i can't figure out how to do it. More specifically, i
want to know how i can control multiple images (animations) in
sequence within a single gif (say, a banner, for instance).
eg: say i have three items in the gif. the first one i want
to slide left, then i want the 2nd item to fade in AFTER the first
is done, then i want the third to rotate after the 2nd is finished,
then finally, have the 2nd item fade back out. is something like
this even possible in FW8?
i've been screwing around for hours trying to get objects to
animate independently and/or sequentially from each other, but
can't figure it out. they all keep animating simultaneously.
i have the FW8 training from the source book, but it only
scratches at the surface of animation. can anyone explain how to do
this or recommend a good, deep book or website on FW8? i was
shocked at how there are almost no books on FW out there, at least
where i looked.

Lithium Nitrate wrote:
> eg: say i have three items in the gif. the first one i
want to slide left,
> then i want the 2nd item to fade in AFTER the first is
done, then i want the
> third to rotate after the 2nd is finished, then finally,
have the 2nd item fade
> back out. is something like this even possible in FW8?
Yes.
> i've been screwing around for hours trying to get
objects to animate
> independently and/or sequentially from each other, but
can't figure it out.
> they all keep animating simultaneously.
You need to start them on different frames. Let's say you
have an image
you want to fade out. You convert it to a symbol, and set it
to rotate
clockwise and fade out. As that symbol fades out, you want
another
symbol to fade in. In the Frames panel, click through the
frames of the
animation until you find the one in which the first symbol is
about
halfway through its fade sequence. Create the second symbol,
the one
that fades in, on that frame.
Linda Rathgeber [PVII] **Adobe Community Expert-Fireworks**
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm

Similar Messages

  • Multiple bone animations in a single export

    I was wondering how to attach multiple bone animations to a
    single model, or if it is even possible.
    Do I just need to have duplicates of the model, each with its
    own animation?
    Is there any way to specify a range of keyframes within a
    single animation timeline?
    It would be nicer if each animation could have its own name.
    Is there a way to import a motion independent of a model?
    These are all just different ways of asking the same
    question, I know
    Thanks for your help!

    This is a multi-part message in MIME format.
    ------=_NextPart_000_005C_01C730C2.7EEBF4D0
    Content-Type: text/plain;
    charset="iso-8859-1"
    Content-Transfer-Encoding: quoted-printable
    hi,
    follow this steps
    Create your character
    apply animations as needed using the power of Softimage XSI
    and the =
    animation mixer if you want.
    put the animations in secuence
    example:
    frames 1-25 standing
    frames 26-50 walking
    frames 51-60 attacking
    and so on...
    after exporting in Director use the range of motion needed in
    your =
    events.
    whichModel.bonesPlayer.play("name", looped, startTime,
    endTime, =
    playRate, timeOffset)
    REMEMBER that startTime and end time are in miliseconds so in
    XSI you =
    need to change your units in preferences to miliseconds also.
    or you can code it in director to have passed fps to
    miliseconds
    Hope it helps,
    Rafa
    www.sintesys.net/exporter
    ------=_NextPart_000_005C_01C730C2.7EEBF4D0
    Content-Type: text/html;
    charset="iso-8859-1"
    Content-Transfer-Encoding: quoted-printable
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
    Transitional//EN">
    <HTML><HEAD>
    <META http-equiv=3DContent-Type content=3D"text/html; =
    charset=3Diso-8859-1">
    <META content=3D"MSHTML 6.00.2800.1106"
    name=3DGENERATOR>
    <STYLE></STYLE>
    </HEAD>
    <BODY>
    <DIV><FONT face=3DArial
    size=3D2>hi,</FONT></DIV>
    <DIV><FONT face=3DArial
    size=3D2></FONT> </DIV>
    <DIV><FONT face=3DArial size=3D2>follow this
    steps</FONT></DIV>
    <DIV><FONT face=3DArial
    size=3D2></FONT> </DIV>
    <DIV><FONT face=3DArial size=3D2>Create your
    character</FONT></DIV>
    <DIV><FONT face=3DArial size=3D2>apply animations
    as needed using the =
    power of=20
    Softimage XSI and the animation mixer if you
    want.</FONT></DIV>
    <DIV><FONT face=3DArial
    size=3D2></FONT> </DIV>
    <DIV><FONT face=3DArial size=3D2>put the
    animations in =
    secuence</FONT></DIV>
    <DIV><FONT face=3DArial
    size=3D2></FONT> </DIV>
    <DIV><FONT face=3DArial
    size=3D2>example:</FONT></DIV>
    <DIV><FONT face=3DArial
    size=3D2></FONT> </DIV>
    <DIV><FONT face=3DArial size=3D2>frames 1-25
    standing</FONT></DIV>
    <DIV><FONT face=3DArial size=3D2>frames 26-50
    walking</FONT></DIV>
    <DIV><FONT face=3DArial size=3D2>frames 51-60
    attacking</FONT></DIV>
    <DIV><FONT face=3DArial size=3D2>and so
    on...</FONT></DIV>
    <DIV><FONT face=3DArial
    size=3D2></FONT> </DIV>
    <DIV><FONT face=3DArial size=3D2>after exporting
    in Director use the =
    range of motion=20
    needed in your events.</FONT></DIV>
    <DIV><FONT face=3DArial
    size=3D2></FONT> </DIV>
    <DIV><FONT face=3DArial
    size=3D2>whichModel.bonesPlayer.play("name", =
    looped,=20
    <STRONG>startTime</STRONG>,
    <STRONG>endTime</STRONG>, playRate,=20
    timeOffset)</FONT></DIV>
    <DIV><FONT face=3DArial
    size=3D2></FONT> </DIV>
    <DIV><FONT face=3DArial size=3D2>REMEMBER that
    startTime and end time =
    are in=20
    miliseconds so in XSI you need to change your units in
    preferences to=20
    miliseconds also.</FONT></DIV>
    <DIV><FONT face=3DArial
    size=3D2></FONT> </DIV>
    <DIV><FONT face=3DArial size=3D2>or you can code
    it in director to =
    have passed =20
    fps to miliseconds</FONT></DIV>
    <DIV><FONT face=3DArial
    size=3D2></FONT> </DIV>
    <DIV><FONT face=3DArial size=3D2>Hope it
    helps,</FONT></DIV>
    <DIV><FONT face=3DArial
    size=3D2></FONT> </DIV>
    <DIV><FONT face=3DArial
    size=3D2>Rafa</FONT></DIV>
    <DIV><A href=3D"
    http://www.sintesys.net/exporter"><FONT
    face=3DArial=20
    size=3D2>www.sintesys.net/exporter</FONT></A></DIV>
    <DIV><FONT face=3DArial
    size=3D2></FONT> </DIV>
    <DIV><FONT face=3DArial
    size=3D2></FONT> </DIV>
    <DIV><FONT face=3DArial
    size=3D2></FONT> </DIV></BODY></HTML>
    ------=_NextPart_000_005C_01C730C2.7EEBF4D0--

  • How to create SINGLE file by combining all files in Adobe edge?

    we are using adobe animate to make medical related flash type cards, we have completed our work
    BUT
    problem is this when job is done edge animate created multiple files to including Scripts, images and HTML files, which becomes very difficult to upload on a server when we need to uplaod thousands of edge files on our site.
    is their any way that all the files are compiled into one file? so it will become really easy to uplaod thousands of flash card.
    secondly, is their any way to encrypt all stuff?

    As far as I know edge is always going to create that whole set of files. that's just the way it works. You had said that your problem stemmed from the fact that you had a lot of these animations or what you called "flashcards" and you didn't want to have to upload a whole set of project files for each card.  right?? My suggestion was just a way to package all your "flashcard" animations into a single edge project so you only have to upload a single set of files for all your "flashcards" . that said, not knowing what your application is or the way the user interacts with the cards this approach might not work for you at all. But I don't think there is a single file (like a swf) solution for edge projects.
    Joel H

  • Is there a way to change a single file/folder's icon size?

    Is there a way to change a single file or folders icon size independant of the rest? So say, you want the HD's on the desktop to be larger than the other files icon sizes?
    I know about view options but thats not quite what I'm looking for.
    Is there a way to do this through terminal, or an aftermarket program?

    Given up on the option

  • Recover a single file in Content Services

    I've been asked to document how we would go about recovering a single file in Content Services. The Trash/Archive angle I'm clear on, but what about an extreme case. Lets say that someone created a file, trashed it, emptied the trash, and then it expired from the Archive before the user realized that they needed the file.
    Is it possible, and if so how would one go about getting the file back assuming that there is a full db backup once a day?
    Would enabling BFILE aging help? If so, how?
    On a related note: If archive is set to expire content after 1 month, but BFILE aging is turned off, when does deleted content get purged from the Archive? It's not 1 month, as I have deleted files in the Archive going back to January.

    Archive expiration and BFile aging are orthogonal. BFile pushes the LOBs of documents that are in the archive to bfile. Archive expiration deletes files from the archive after the configured time. If this is not the behaviour you are seeing please file a TAR and they can help check whether your system is configured correctly or if you are running into a bug.
    regards,
    -sancho

  • Scanning multiple pages to single file

    I have the HP Officejet Pro 8600.  I use to be able to scan multiple pages to one file.  For some reason now it separates the pages into single files.  Under advanced settings it looks like the option "create a separate file for each scanned page" is checked, however, it is not highlighted so I can't change it or uncheck it. 

    KB-Sales,
    Welcome to the HP Forum.
    Assuming a recent Windows Operating System and that you install the Full Feature Software (printer software), then you may use the Printer Assistant shortcut to access Scan Document or Photo.
    From there, you may be able to use / create a Scan Template to combine files to output to a final, single file.
    The following Dragon Document may help:
    Scan_Multiple_Documents-Combine
    Note the hint about creating your own Shortcut / Template in the instructions.
    Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Click Accept as Solution when the Answer is a good Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • How do you delete [empty] a single file or folder from "Trash"?

    How do you delete [empty] a single file or folder from "Trash"?
    Can you "securely delete" just 1 item?

    A dangerous and incorrect shell command has been posted in this thread.
    NEVER empty the Trash in the shell (Terminal.) NEVER put anything in the Trash unless you intend to delete it immediately. If you do put something in the Trash and change your mind about deleting it, move it out or use the Put Back contextual menu item. Then empty the remaining items in the Trash as usual.

  • Payment Order (multiple) Idocs need to be downloaded into single file

    Hello Gurus,
    I am able to generate Idocs for Automatic Payment Run in F110 for message type PAYEXT with PEXR2002 idoc type.  However, what I found is the system generates one idoc per vendor for a single payment method. So, for example if I run APP for 50 vendors at a time, 50 different idocs are generated and placed in AL11.  Currently the requirement is to download the idocs into flat file and upload it in Bank's website. I would like to know is there any way to download all the 50 idocs into a single file (ie a single file containing payment run information for all vendors).
    PS: I use CG3Y Tcode to dowload Idoc from AL11 mentioning the directory path but this can allow me to download only one file at a time.
    Any Info regarding this would be appreciated.
    Thanks in advance,
    -Naryanaan-

    Hi
    I'm facing the same problem . Were you able to solve this by heavy customization.
    best Wishes

  • Insert animated gif or flash files (.swf) in Form?

    How can i insert animated gif or flash files (.swf) or another type of animated files in Form?

    If you are web deployed you can put an animated gif as the image to an iconic button.
    Image items cannot display animated gifs.
    Anything else you can do through a JavaBean if you need to.

  • How can i export the contents of just one artboard, when there are many in a single file

    What's the best way to accomplish this?  I have four designs I want to show someone.  Also, if they're side by side and save the file as a pdf, will it just display single file?  Thanks.

    When performing a save as or export, enable the Range Radio Button, enter the pages you want.

  • Cannot open dashboard from connected client to restore a single file

    I have a small business network with an existing Server 2008 R2 domain controller.  In order to backup all the client machines with an experience something like windows home server I recently purchased a new server with windows server 2012 r2 and
    installed the essentials role.
    I'm able to connect client machines (running windows 7) to the new server and get them to backup.  I assume (but have not yet tested) that I would be able to do a full image restore by creating a client restore bootable usb key and booting a client from
    that, but first I'd like to be able to browse the files in a client backup and restore a single file rather than the full image.  It seems that the only way to do that is to run the dashboard as a remoteapp from the client, but when I try that I get this
    error:
    I thought that I might need to add the remote desktop services role.  So I tried doing that and publishing the dashboard as a remoteapp, but the error still appears.  Even if that fixed the problem, though, I would be concerned that would mean we
    needed RDS CALs for each client which seems like overkill just for the ability to restore a single file from a backup.
    So, is there any other way to get to the dashboard or otherwise restore files onto a client?  
    Thanks.
    This posting is provided "AS IS" with no warranties, and confers no rights.

    Um, well looky here :)
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/cf6abdeb-a517-424c-bbef-050bee22a658/remoteapp-error-when-launching-dashboard-from-client-pc?forum=winserveressentials
    Grey
    PS: Has nothing to do with the price of eggs, but interesting ?
    http://www.windowsnetworking.com/articles-tutorials/netgeneral/host-remoteapps-windows-pcs-part1.html

  • Multiple jobs writing to a single file

    Hi,
    My program requires me to create 20 jobs. Each job needs to write into a single file on the application server. I have tried using open dataset, transfer and close dataset approach but it doesn't work.
    I open the data set before submitting the report via jobs. in the each job the there is the transfer statement. When all jobs are completed close data set statement is triggered.
    When i run this code the jobs give a dump at the transfer statement stating that the data set is not open.
    Can anyone suggest a different approach to achieve this. I need to create a single file with all the processing details retrieved from the jobs.
    PS: I have also tried using EXPORT LIST TO MEMORY while submitting, but it gives me an error that we cannot use use this when submitting the report via jobs.

    The batch job cannot share the OPEN DATASET of the caller...
    You must open the DATASET in each job, and only one job at any time can do this if you  dont want unpredictable results.
    Lock
    Manage error code during OPEN form if another job is currently filling the dataset (DO/ENDDO) - Lock during OPEN/TRANSFER/CLOSE
    Locks
    The database interface does not have an integrated lock mechanism to ensure that only one ABAP program accesses a file at any one time. If several programs simultaneously gain write access to a file, this will have unpredictable results.
    To avoid this situation, SAP locks can be assigned, or unique file names such as GUIDs can be used.
    Look for an existing lock object or create a new one to insure this.
    OPEN DATASET Syntax
    OPEN/TRANSFER/CLOSE at end of each job to minimize lock time. Use FOR [APPENDING|http://help.sap.com/abapdocu_70/en/ABAPOPEN_DATASET_ACCESS.htm#&ABAP_ALTERNATIVE_2@2@] in [OPEN DATASET|http://help.sap.com/abapdocu_70/en/ABAPOPEN_DATASET.htm] statement
    Regards,
    Raymond

  • How do I combine several pdf files into a single file (MAC OS)?

    How do I combine several pdf files into a single file ?
    MAC OS 10.6.8
    Adobe Reader 11.0.10
    Signed: Ken, in Utah

    Not possible with Reader. You need Acrobat or a subscription to something like PDF Pack to do it.

  • Multiple FileChannels on a Single File

    I wonder if anyone could help on this please: is it possible to have multiple filechannels on single file, basically I have a RandomAccessFile where I got my FileChannel from , any attempt for a getChannel on this RandomAccessFile object always return a unique FileChannel same as the previous one. is there anyway to get deferent FileChannels ? or may be any other way to get around this?

    Thanks Alan, for the replay, but actually I do not want to open the file many times, if I would to use what you have suggested: " FileChannel fc1 = new RandomAccessFile(f, "rw").getChannel();
    FileChannel fc2 = new RandomAccessFile(f, "rw").getChannel();"
    then this will open the file "f" many times.
    my question is : I would like to open the file once by " RandomAccessFile raf = new RandomAcessFile(f, "rw")" and then how could I get multiple channels on this raf ?
    any time I call raf.getChannel() it return a unique FileChannel object, say:
    FileChannel fic1 = raf.getChannel(); FileChannel fic2 = raf.getChannel();
    fic1 and fic2 are eventually the same, so any attempt to manipulate fic1 would affect fic2; say the cursor position and so on.

  • Multiple labels on a single file?

    Is there a way to place multiple labels on a single file? I'd like to be able to sort files based on several partially overlapping criteria. Thanks.

    Files can only have one name.

Maybe you are looking for

  • Vendor downpayment tax

    Hi sap Guru's Service Tax payable on Vendor Advances at the time of down payment. Requirement: New tax code X5 need to create with CST@5% on 80% of Bill value and service Tax @12.36% on 70% of Bill value. While calculating the CST amount, system shou

  • When i upgrade, will I have to give up my unlimited data?

    Anyone that has been in the same boat.. 1 phone, I have had unlimited data with my past 2 phones. I have been told by others that they make you give up your unlimited data plan if you upgrade your device. Has anyone been able to recently upgrade and

  • IDoc Issues when creating a Sales Order in CRM System

    Hi All, We have a BSP application in place which allows the customers to create orders online. This BSP application is linked to R/3. The R/3 BSP application remotely calls a custom code in the CRM system which creates an IDOC for the CRM Order and t

  • VPRS into Sales order

    Hi Gurus, In pricing procedure v define the condition type VPRS, but v need not maintain condition record for this, then how the VPRS condition value will b determined in Sales order? Cheers, Chitty

  • How to delete unwanted username -- steps in forum do not work

    (e.g. [email protected]) appears (pops up) in the remembered username boxes on the Yahoo mail and match.com websites among others. The process suggested for erasing such an unwanted entry does not work -- namely highlighting the phrase then pressing