MulitScan 15 not doing 640 X 480 anymore

My Apple Multiple Scan 15 monitor is having trouble with 640 X 480 resolution. Left and right sides curve inwards and the menu bar is way past the top of the screen. This just happened the last time I turned it on, no obvious damage or settings changes. 800 X 600 works as does 832 X 764. Is this a sign of impending monitor failure? It is currently being used with a Performa 6300CD, and I use the lower resolution for watching TV.

A further curious fact to add to the mystery; the resolution 640 X 480 @ 67Hz is the one that I am having the problem with, but when I chose “all” instead of “Recommended” resolutions from the OS 8.1 Monitors & Sound control panel, a resolution of 640 X 480 appeared with no refresh rate given, and that one works fine!?! And of course I erred when I said that there is a resolution of 832 X 764, it is actually 832 X 624 @ 75Hz.
I basically got this Monitor for free louie, I was just wondering if anyone else had experienced this problem and knew of a quick, inexpensive fix, or if I should start the search for another MultiSync monitor.
Apropos of nothing, I do have another monitor waiting in the wings, a beautiful Apple 16” Color Display with a Trinitron screen, but unfortunately it only has one resolution; 832 X 624, which is a setting that the standard digitizer of the Apple Video Player won’t work with. Hence my need for a working MultiSync monitor.

Similar Messages

Why does the iMovie update now make it impossible to save in 640 by 480 ?

Just this week Imovie now wants to save / export my files in unusual formats instead of 640 by 480 - which is what I need to upload a longer video to Vimeo ( not Vimeo pro ) - Why has this been changed ?
( I do know that direct upload to Vimeo is possible - but sometimes I want to replace files - and that cannot be done directly )
Will this be addressed in an urgent update ?

bazeley55 wrote:
- I tidied it away into the trash - after all the original imovie worked perfectly well.
any other sugestions ?
That's too bad. You don't have a Time Machine or some other backup tucked away somewhere?
The new version of iMovie is a pretty complete re-write so a bit of three steps forward, two steps back in terms of features. Some may get added back with time but it's impossible to say when and if that may happen.
The easiest way to get back to what you were doing to find your self a copy of iMovie version 9. You can buy it on DVD from sites like Amazon.
Depending on what exactly you are doing you could see if QuickTime Pro 7 will do what you need.
http://www.apple.com/quicktime/extending/
There's als Final Cut Pro 10, but that's a $300.
What kind of files are you trying to produce?
Matt

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

TS3048 my magic mouse does not want to right click anymore?

My magic mouse does not seem to right click anymore, any suggestions? For example, I used to right click on my icon of my memory card from the camera that I have inserted into the side of the IMac and I could choose "eject" now it doesn't want to right click and open up those options. Am I doing something wrong?

Hey.
This seems to be a common issue.
I've seen mixed posts on the net about the ES8000 working with the Apple Keyboard but from what I've seen the Apple mouse tends to fail the sync constantly.
Sad, I just bought a mouse to improve navigasting on the ES8000 and dissapointed that it doesn't sync. Maybe an issue with drivers on the TV.
Which Dell mouse (model number) works for you?

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem)

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks

sgetraer wrote:
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks
1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for.

I can not create an Installer, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...

I can not create an Installer on LabView, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...
Solved!
Go to Solution.

Hi Shada this can happen if you are including additional installers to your installer for example DAQmx. When you are doing this the installer has to include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder it updated MAX, so when your installer is trying to Include MAX, its asking for the source where it was installed in your computer in this case Vision Builder.
Here you can cache the information so its not asked again, or you can download a newer version fo DAQmx, so it will update MAX and change de dependecy.
You can find more details about this issue in this KB:
KnowledgeBase 3S88PJMY: Why Do I Get A "Missing Distribution" Error When Trying to Build an Installe...
And for keeping a copy here is more info:
How Do I Stop the Missing Distribution Notification Each Time I Build An Installer?
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

My brother and I phone number is link together on the same iTunes and Icloud therefore I am getting all his text messages on my phone, how do I stop this? He does not even have an Iphone anymore.

My brother and I phone number is link together on the same iTunes and Icloud therefore I am getting all his text messages on my phone, how do I stop this? He does not even have an Iphone anymore.

Try going to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at". If that doesn't work, you'll have to tap the ID, sign out, then sign back in with a different Apple ID for iMessage.

Why does my airport extreme not recognize my cable modem anymore?

Why does my airport extreme not recognize my cable modem anymore?

Have you tried resetting the modem? Power it down and let it rest a moment, then power it back up again.
Also, some ISPs require physically detaching their cable from the modem for it to be fully reset. Literally unscrew it from the modem. Try that, in conjunction with powering it down.
Don't do anything with your Extreme, other than powering it down too, in the event the modem reset does not help. Reconfiguring it may be necessary but this is not justified quite yet.

When i try to look at my pictures on my iphone horizontally instead of vertically it does not flip the pictures sideways anymore - any suggestions?

when i try to look at my pictures on my iphone horizontally instead of vertically it does not flip the pictures sideways anymore - any suggestions?

This is written for the iPad but the same applies to iPhones
Rotate iPad so the display is in the desired orientation.
Double-click the Home button to display recently used apps.
Flick from left to right along the bottom of the screen.
Tap the Screen Rotation Lock button on the bottom left of the screen.
A padlock will appear in the Screen Rotation Lock button.
A small Screen Rotation Lock icon appears in the status bar until you disable Screen Rotation Lock:

After update to IOS 6.0, on the iPhone 4 and 4s, emails can not be forwarded. I tried to resync, but the update does not show the forwarding buttons anymore.

After update to IOS 6.0, on the iPhone 4 and 4s, emails can not be forwarded. I tried to resync, but the update does not show the forwarding buttons anymore.

Have the same issues here, 3GS 5.0.1. Did you find any solutions until today ?
I restored my phone, power up/down but nothing helps with my issues
greetings
/Edit:
Maybe I should read carefully your text so I can give you some more information.
my phone was updated via itunes.
some hours ago the phone charged up to 5% but than directly draining to zero...
can't help me with these issues...

It does not show web-french-canada anymore

When I open Firefox, it does not show Web-French-canada anymore.

'''Step 1.''' You can check if you have any of these from [http://www.google.com/search?q=%22Fun+Web+Products%22&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:es-ES:official&client=firefox-a "Fun Web Products"] installed:
Control Panel > Add or Remove Programs: Ask.com Bar,My Search Bar,MyWay Speed Bar,My Web Search Bar,Fun Web Products Easy Installer
See:
http://www.safer-networking.com/removemywebsearch.php
[http://www.pchell.com/support/mywebsearch.shtml PC Hell: My Web Search Removal Instructions]
http://helpint.mywebsearch.com/intlinfo/help/toolhelp.jhtml#q3
'''Step 2.''' You '''may''' need to change a preference to reset your default URL/location bar search provider:
-Enter '''about:config''' in the address/URL bar and press the Enter key
-If you see a warning, accept it (Promise that you will be careful)
-Filter = keyword.url
-Below the Filter, right-click on keyword.URL and choose "Reset"
-Restart Firefox (File > Restart Firefox)
See: http://kb.mozillazine.org/Keyword.url
'''Step 3.''' You '''may''' need to reset your homepage. Firefox can open multiple home pages. Home pages are separated by the "|" symbol.
See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

640 x 480

I need to have my mini/display set at 640 x 480. So, after I change the resolution to 640 x 480 then restart the computer, the resolution automatically switches back to 1024 x 786. I've tried this on numerous displays all with the same outcome. This is the only resolution in the list of options given in the preferences that this happens to. All others resstart just as I set them in the preferences...any clue as to what is going on? Any help would be appreciated!

That's a really interesting problem. 640x480 is the lowest resolution "console" mode that a Mac puts out. I never noticed before that you can't leave a Mac set at that resolution through a restart, but I have honestly never tried.
Does the bad behavior change if you select different refresh rates? Maybe that would trigger the Mac to think "you really mean it" that you want 640x480 if you set a high refresh rate, like 85Hz or more. Alternately, if you are really desperate for a solution, it might work to use a product like SwitchRes X to build a custom 640x480 resolution. I would think that it would stick in that case and not change on you during restarts.

IDVD 08 insist to transform NTSC 720 x 480 files in 640 x 480!!!

iDVD 08 insist to burn NTSC 720 x 480 files in 640 x 480
And of course smaller with a black box…
I've tried everything in vain.
It's the same If I select widescreen or 4/3 menus…
My files are mp4 H.264 files.
I'm quite desperate since I don't get WHY iDVD wants that DVDs look like 50 years old TV shows !
I looked at the forum and couldn't find any info relative to this problem.
I wonder if it's the fact that these files are Progressive. But I thought iDVD took care of it…
This is a full description of a file I use:
* MediaInfo Mac // Plain text file report
General / Container Stream # 1
Total Video Streams for this File -> 1
Total Audio Streams for this File -> 1
Video Codecs Used -> AVC
Audio Codecs Used -> AAC LC
File Format -> MPEG-4
Play Time -> 16mn 50s
Total File Size -> 1.76 GiB
Total Stream BitRate -> 14.9 Mbps
Video Stream # 1
Codec (Human Name) -> AVC
Codec (FourCC) -> avc1
Codec Profile -> [email protected]
Frame Width -> 720 pixels
Frame Height -> 480 pixels
Frame Rate -> 29.970 fps
Total Frames -> 30283
Display Aspect Ratio -> 1.500
Video Standard -> NTSC
Scan Type -> Progressive
Colorimetry -> 4:2:0
Codec Settings (Summary) -> 2 Ref Frames
QF (like Gordian Knot) -> 1.418
Codec Settings (CABAC) -> No
Video Stream Length -> 16mn 50s 443ms
Video Stream BitRate -> 14.7 Mbps
Video Stream BitRate Mode -> VBR
Bit Depth -> 24 bits
Video Stream Size -> 1.73 GiB (98%)
Video Stream Language -> English
Date of Original Encoding -> UTC 2008-12-14 20:24:26
Audio Stream # 1
Codec -> AAC
Codec (FourCC) -> 40
Audio Stream Length -> 16mn 50s 112ms
Audio Stream BitRate -> 256 Kbps
Audio Stream BitRate Mode -> CBR
Number of Audio Channels -> 2
Audio Channel's Positions -> L R
Sampling Rate -> 48.0 KHz
Bit Depth -> 16 bits
Audio Stream Size -> 30.8 MiB (2%)
Audio Stream Language -> English
Date of Original Encoding -> UTC 2008-12-14 20:24:26
Thanks in advance for any help!
m

A TV uses rectangular pixels: 720x480.
A computer uses square pixels. So, those same pixels (720x480) are actually 640x480 and a computer. So this is normal.
The quality of your DVDs would be a separate and subjective issue. However, I can suggest that you NOT use H.264 (very compressed format) as the format for iDVD (which does it's own compression) to work with. I would give iDVD a DV or AIC file.
Mike

24' cinema display stuck in 640 X 480 - unless used in Apple Store!

I really need some help with my new MBP and 24" LED cinema display that is driving me crazy. The first part of the problem is that when I bring my MBP out of sleep and attach the monitor, or if I simply disconnect the monitor and reconnect it without sleeping, it only shows 640X480 and no options for other display settings.
I have tried a great many things and suggestions, including deleting the com.apple.windowserver.plist files (system and byhost versions), repairing the permissions, resetting the pram. Nothing makes any difference to this behaviour.
The second part of the problem is that having decided it was the monitor itself I took both the display and the MBP back to the apple store today where it worked faultlessly - no amount of rebooting, sleeping and attaching/detaching would make the error occur. Once we gave and I got them both home again - it reverted to the previous, faulty behaviour! We wondered in the store if it was a faulty cable - but no amount of wriggling of the cable makes any difference.
When The display is correct, the system profiler shows:
LED Cinema Display:
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Software
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported
Connection Type: DisplayPort
When the display goes to its 640 X 480 mode, the system profiler shows:
Display:
Resolution: 640 x 480
Depth: 32-bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Connection Type: DisplayPort
I found a few things relating to issues with recognition of monitors when coming out of sleep - but this monitor was made specifically for this MBP, and others don't seem to be having this problem. My MBP also works fine with my DELL flatscreen display at a high resolution.
Anyone got any idea what else I can change before I have to completely rebuild my MBP. I am really confused by this - why would it insist on working in the Apple Store and refuse to work correctly at home?

First off, the power cable is not permanently attached to the monitor. It is a 3-pronged, grounded connector at the monitor end. I know because I just disconnected mine and freed up the entire cable. Since I'm one of those who just does stuff even when it may not always be well-advised, I can report on an experience that could bear on your situation.
I had my Mac Pro running when I reached around the back of my 24" LED display and pulled the plug from the monitor. Of course, the monitor instantly went "black". I quickly replugged it back in (no, I didn't shut anything down and risked frying the monitor). When the monitor returned to life it was "stuck" in 640 x 480 mode and I could only "restart" or "shut down" to get it restored to the 1920 x 1200 mode I keep it in.
This suggests to me that the problem lies in your cabling and power delivery system. Perhaps you are getting power surges or power spikes that have the equivalent effect of taking your monitor "off" and then returning the monitor to a 640 x 480 condition after restoring power.
If it were me, I'd try with a new monitor cable to power. I'm betting your problem doesn't have anything to do with the monitor to computer cable, but it isn't the only cable here. Something is disrupting the constant power feed and I'm betting the problem is amplified by faulty power cord. Since I just replicated your situation by literally pulling the plug and replugging it in, it seems to me that this would be a fruitful area of investigation.
Hope this leads you somewhere positive.

640 x 480 resolution problem [solved]

I testing Arch. I've got it installed as a vbox guest. I plan (if things go well) to eventually turn it into a live CD, as I can't find one out there now that fully meets my needs.
So far, things have gone pretty smooth, but now I've hit a wall. I got lxde installed (live CD, so keep it light and lean) and it works. The problem is the resolution is stuck at 640 x 480. I can't increase it. xrandr says my max is 640 x 480, which I know isn't true. Obviously installing specific drivers isn't an option as I plan on doing the live CD. Quite a bit of searching turned up several solved, but most of those were physical hardware issues in the end (Puppy does 1600x1050 as a guest, so it's not hardware or vbox) and "it just fixed itself" isn't an answer for me. What am I doing wrong?
Xorg.0.log
[ 4.981]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 4.981] X Protocol Version 11, Revision 0
[ 4.981] Build Operating System: Linux 3.12.5-1-ARCH i686
[ 4.981] Current Operating System: Linux AveA 3.12.9-1-ARCH #1 SMP PREEMPT Sun Jan 26 09:15:23 CET 2014 i686
[ 4.981] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=fbaafe30-b716-4dfa-b1b6-a1d8e054b5d1 rw quiet
[ 4.981] Build Date: 09 January 2014 09:32:33AM
[ 4.981]
[ 4.981] Current version of pixman: 0.32.4
[ 4.981] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 4.981] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.981] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 15 22:46:13 2014
[ 5.028] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 5.028] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.072] (==) No Layout section. Using the first Screen section.
[ 5.072] (==) No screen section available. Using defaults.
[ 5.072] (**) |-->Screen "Default Screen Section" (0)
[ 5.072] (**) | |-->Monitor "<default monitor>"
[ 5.073] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.073] (==) Automatically adding devices
[ 5.073] (==) Automatically enabling devices
[ 5.073] (==) Automatically adding GPU devices
[ 5.090] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 5.090] Entry deleted from font path.
[ 5.115] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 5.115] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.115] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.115] (II) Loader magic: 0x8265660
[ 5.115] (II) Module ABI versions:
[ 5.115] X.Org ANSI C Emulation: 0.4
[ 5.115] X.Org Video Driver: 15.0
[ 5.115] X.Org XInput driver : 20.0
[ 5.115] X.Org Server Extension : 8.0
[ 5.116] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5.130] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/33554432
[ 5.130] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 5.131] Initializing built-in extension Generic Event Extension
[ 5.131] Initializing built-in extension SHAPE
[ 5.131] Initializing built-in extension MIT-SHM
[ 5.131] Initializing built-in extension XInputExtension
[ 5.131] Initializing built-in extension XTEST
[ 5.131] Initializing built-in extension BIG-REQUESTS
[ 5.131] Initializing built-in extension SYNC
[ 5.131] Initializing built-in extension XKEYBOARD
[ 5.131] Initializing built-in extension XC-MISC
[ 5.131] Initializing built-in extension SECURITY
[ 5.132] Initializing built-in extension XINERAMA
[ 5.132] Initializing built-in extension XFIXES
[ 5.132] Initializing built-in extension RENDER
[ 5.132] Initializing built-in extension RANDR
[ 5.132] Initializing built-in extension COMPOSITE
[ 5.132] Initializing built-in extension DAMAGE
[ 5.132] Initializing built-in extension MIT-SCREEN-SAVER
[ 5.132] Initializing built-in extension DOUBLE-BUFFER
[ 5.132] Initializing built-in extension RECORD
[ 5.132] Initializing built-in extension DPMS
[ 5.132] Initializing built-in extension Present
[ 5.132] Initializing built-in extension DRI3
[ 5.132] Initializing built-in extension X-Resource
[ 5.132] Initializing built-in extension XVideo
[ 5.132] Initializing built-in extension XVideo-MotionCompensation
[ 5.132] Initializing built-in extension XFree86-VidModeExtension
[ 5.132] Initializing built-in extension XFree86-DGA
[ 5.132] Initializing built-in extension XFree86-DRI
[ 5.132] Initializing built-in extension DRI2
[ 5.132] (II) "glx" will be loaded by default.
[ 5.132] (II) LoadModule: "dri2"
[ 5.132] (II) Module "dri2" already built-in
[ 5.132] (II) LoadModule: "glamoregl"
[ 5.132] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5.323] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5.323] compiled for 1.15.0, module version = 0.6.0
[ 5.323] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.323] (II) LoadModule: "glx"
[ 5.338] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.352] (II) Module glx: vendor="X.Org Foundation"
[ 5.352] compiled for 1.15.0, module version = 1.0.0
[ 5.352] ABI class: X.Org Server Extension, version 8.0
[ 5.352] (==) AIGLX enabled
[ 5.352] Loading extension GLX
[ 5.352] (==) Matched vboxvideo as autoconfigured driver 0
[ 5.352] (==) Matched vboxvideo as autoconfigured driver 1
[ 5.352] (==) Matched modesetting as autoconfigured driver 2
[ 5.352] (==) Matched fbdev as autoconfigured driver 3
[ 5.352] (==) Matched vesa as autoconfigured driver 4
[ 5.352] (==) Assigned the driver to the xf86ConfigLayout
[ 5.352] (II) LoadModule: "vboxvideo"
[ 5.371] (WW) Warning, couldn't open module vboxvideo
[ 5.371] (II) UnloadModule: "vboxvideo"
[ 5.371] (II) Unloading vboxvideo
[ 5.371] (EE) Failed to load module "vboxvideo" (module does not exist, 0)
[ 5.371] (II) LoadModule: "modesetting"
[ 5.371] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.388] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.388] compiled for 1.15.0, module version = 0.8.1
[ 5.388] Module class: X.Org Video Driver
[ 5.389] ABI class: X.Org Video Driver, version 15.0
[ 5.389] (II) LoadModule: "fbdev"
[ 5.389] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 5.393] (II) Module fbdev: vendor="X.Org Foundation"
[ 5.393] compiled for 1.15.0, module version = 0.4.4
[ 5.393] Module class: X.Org Video Driver
[ 5.393] ABI class: X.Org Video Driver, version 15.0
[ 5.393] (II) LoadModule: "vesa"
[ 5.394] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 5.403] (II) Module vesa: vendor="X.Org Foundation"
[ 5.404] compiled for 1.15.0, module version = 2.3.2
[ 5.404] Module class: X.Org Video Driver
[ 5.404] ABI class: X.Org Video Driver, version 15.0
[ 5.404] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.404] (II) FBDEV: driver for framebuffer: fbdev
[ 5.404] (II) VESA: driver for VESA chipsets: vesa
[ 5.404] (++) using VT number 1
[ 5.404] (WW) Falling back to old probe method for modesetting
[ 5.404] (II) Loading sub module "fbdevhw"
[ 5.404] (II) LoadModule: "fbdevhw"
[ 5.404] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 5.415] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 5.415] compiled for 1.15.0, module version = 0.0.2
[ 5.415] ABI class: X.Org Video Driver, version 15.0
[ 5.415] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[ 5.415] (II) FBDEV(1): using default device
[ 5.415] (WW) Falling back to old probe method for vesa
[ 5.416] (EE) Screen 0 deleted because of no matching config section.
[ 5.416] (II) UnloadModule: "modesetting"
[ 5.416] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.416] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 5.416] (==) FBDEV(0): RGB weight 888
[ 5.416] (==) FBDEV(0): Default visual is TrueColor
[ 5.416] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.416] (II) FBDEV(0): hardware: VESA VGA (video memory: 1216kB)
[ 5.416] (II) FBDEV(0): checking modes against framebuffer device...
[ 5.416] (II) FBDEV(0): checking modes against monitor...
[ 5.416] (--) FBDEV(0): Virtual size is 640x480 (pitch 640)
[ 5.416] (**) FBDEV(0): Built-in mode "current": 30.7 MHz, 36.9 kHz, 73.3 Hz
[ 5.416] (II) FBDEV(0): Modeline "current"x0.0 30.72 640 672 752 832 480 484 488 504 -hsync -vsync -csync (36.9 kHz b)
[ 5.416] (==) FBDEV(0): DPI set to (96, 96)
[ 5.416] (II) Loading sub module "fb"
[ 5.416] (II) LoadModule: "fb"
[ 5.416] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.422] (II) Module fb: vendor="X.Org Foundation"
[ 5.422] compiled for 1.15.0, module version = 1.0.0
[ 5.422] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.422] (**) FBDEV(0): using shadow framebuffer
[ 5.422] (II) Loading sub module "shadow"
[ 5.422] (II) LoadModule: "shadow"
[ 5.422] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 5.426] (II) Module shadow: vendor="X.Org Foundation"
[ 5.426] compiled for 1.15.0, module version = 1.1.0
[ 5.426] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.426] (II) UnloadModule: "vesa"
[ 5.426] (II) Unloading vesa
[ 5.426] (==) Depth 24 pixmap format is 32 bpp
[ 5.426] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 5.433] (==) FBDEV(0): Backing store enabled
[ 5.434] (==) FBDEV(0): DPMS enabled
[ 5.434] (==) RandR enabled
[ 5.451] (II) AIGLX: Screen 0 is not DRI2 capable
[ 5.451] (EE) AIGLX: reverting to software rendering
[ 5.993] (II) AIGLX: Loaded and initialized swrast
[ 5.993] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 6.318] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 6.318] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.318] (II) LoadModule: "evdev"
[ 6.318] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.331] (II) Module evdev: vendor="X.Org Foundation"
[ 6.331] compiled for 1.15.0, module version = 2.8.2
[ 6.331] Module class: X.Org XInput Driver
[ 6.331] ABI class: X.Org XInput driver, version 20.0
[ 6.331] (II) Using input driver 'evdev' for 'Power Button'
[ 6.331] (**) Power Button: always reports core events
[ 6.331] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 6.331] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.331] (--) evdev: Power Button: Found keys
[ 6.331] (II) evdev: Power Button: Configuring as keyboard
[ 6.331] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event1"
[ 6.331] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6.331] (**) Option "xkb_rules" "evdev"
[ 6.331] (**) Option "xkb_model" "pc104"
[ 6.331] (**) Option "xkb_layout" "us"
[ 6.351] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 6.351] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 6.351] (II) Using input driver 'evdev' for 'Sleep Button'
[ 6.351] (**) Sleep Button: always reports core events
[ 6.351] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 6.351] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 6.351] (--) evdev: Sleep Button: Found keys
[ 6.351] (II) evdev: Sleep Button: Configuring as keyboard
[ 6.351] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input3/event2"
[ 6.351] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 6.351] (**) Option "xkb_rules" "evdev"
[ 6.351] (**) Option "xkb_model" "pc104"
[ 6.351] (**) Option "xkb_layout" "us"
[ 6.352] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 6.352] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event3)
[ 6.352] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[ 6.352] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[ 6.352] (**) VirtualBox mouse integration: always reports core events
[ 6.352] (**) evdev: VirtualBox mouse integration: Device: "/dev/input/event3"
[ 6.352] (--) evdev: VirtualBox mouse integration: Vendor 0x80ee Product 0xcafe
[ 6.352] (--) evdev: VirtualBox mouse integration: Found 1 mouse buttons
[ 6.352] (--) evdev: VirtualBox mouse integration: Found absolute axes
[ 6.352] (--) evdev: VirtualBox mouse integration: Found x and y absolute axes
[ 6.352] (--) evdev: VirtualBox mouse integration: Found absolute touchscreen
[ 6.352] (II) evdev: VirtualBox mouse integration: Configuring as touchscreen
[ 6.352] (**) evdev: VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[ 6.352] (**) evdev: VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6.352] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input4/event3"
[ 6.352] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: TOUCHSCREEN, id 8)
[ 6.352] (II) evdev: VirtualBox mouse integration: initialized for absolute axes.
[ 6.352] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[ 6.352] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[ 6.352] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[ 6.352] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[ 6.352] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js0)
[ 6.353] (II) No input driver specified, ignoring this device.
[ 6.353] (II) This device may have been added with another device file.
[ 6.353] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event5)
[ 6.353] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[ 6.353] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[ 6.353] (**) VirtualBox USB Tablet: always reports core events
[ 6.353] (**) evdev: VirtualBox USB Tablet: Device: "/dev/input/event5"
[ 6.353] (--) evdev: VirtualBox USB Tablet: Vendor 0x80ee Product 0x21
[ 6.353] (--) evdev: VirtualBox USB Tablet: Found 9 mouse buttons
[ 6.353] (--) evdev: VirtualBox USB Tablet: Found scroll wheel(s)
[ 6.353] (--) evdev: VirtualBox USB Tablet: Found relative axes
[ 6.353] (--) evdev: VirtualBox USB Tablet: Found absolute axes
[ 6.353] (--) evdev: VirtualBox USB Tablet: Found x and y absolute axes
[ 6.353] (--) evdev: VirtualBox USB Tablet: Found absolute touchscreen
[ 6.353] (II) evdev: VirtualBox USB Tablet: Configuring as touchscreen
[ 6.353] (II) evdev: VirtualBox USB Tablet: Adding scrollwheel support
[ 6.353] (**) evdev: VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[ 6.353] (**) evdev: VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6.353] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input6/event5"
[ 6.354] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: TOUCHSCREEN, id 9)
[ 6.354] (WW) evdev: VirtualBox USB Tablet: touchpads, tablets and touchscreens ignore relative axes.
[ 6.354] (II) evdev: VirtualBox USB Tablet: initialized for absolute axes.
[ 6.354] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[ 6.354] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[ 6.354] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[ 6.354] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[ 6.354] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js1)
[ 6.354] (II) No input driver specified, ignoring this device.
[ 6.354] (II) This device may have been added with another device file.
[ 6.354] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse0)
[ 6.354] (II) No input driver specified, ignoring this device.
[ 6.354] (II) This device may have been added with another device file.
[ 6.354] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 6.355] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 6.355] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 6.355] (**) AT Translated Set 2 keyboard: always reports core events
[ 6.355] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 6.355] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 6.355] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 6.355] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 6.355] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 6.355] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 6.355] (**) Option "xkb_rules" "evdev"
[ 6.355] (**) Option "xkb_model" "pc104"
[ 6.355] (**) Option "xkb_layout" "us"
[ 6.355] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event6)
[ 6.355] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 6.355] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[ 6.355] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 6.355] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event6"
[ 6.355] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[ 6.355] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 6.355] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 6.355] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 6.355] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 6.355] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 6.355] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[ 6.355] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 6.355] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6.355] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event6"
[ 6.355] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 11)
[ 6.355] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 6.355] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[ 6.355] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[ 6.355] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[ 6.355] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[ 6.355] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse1)
[ 6.355] (II) No input driver specified, ignoring this device.
[ 6.355] (II) This device may have been added with another device file.
[ 6.356] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 6.356] (II) No input driver specified, ignoring this device.
[ 6.356] (II) This device may have been added with another device file.
[ 6.358] (EE) FBDEV(0): FBIOBLANK: Invalid argument
Last edited by rsberzerker (2014-02-16 23:30:00)

Vesa drivers are normally used as a fallback as it is very generic. Use the free or proprietary drivers for your intel/ati/nvidia instead.
Here is a quote from the beginner's guide:
"The vesa driver is a generic mode-setting driver that will work with almost every GPU, but will not provide any 2D or 3D acceleration. If a better driver cannot be found or fails to load, Xorg will fall back to vesa. To install it:"
https://wiki.archlinux.org/index.php/Beginners'_Guide/Post-installation#Install_a_video_driver

MulitScan 15 not doing 640 X 480 anymore

Similar Messages

Maybe you are looking for