Multi Cam Flicker Issue - Premiere Pro CC 2014

Multi Cam Flicker Issue - Premiere Pro CC 2014 can any one help me pls

Hi,
This might help :
Go to File > Project Settings > General and change the Video Renderer to Mercury Playback Engine software only. Click OK and select Delete Previews.
Thanks,
Rameez

Similar Messages

ICanon C100 playback issue premiere pro cc 2014

I am having playback issues in Premiere Pro CC 2014 with footage shot on my Canon C100 (29.97 fps). It was happening after doing a straight import and creating a sequence using "new item". Then, after reading some other threads here and elsewhere, I interpreted the footage so premiere would see it as progressive (no fields) rather than interlaced, but that doe not seem to help. It is even doing it when I play at 1/4 resolution. The only solution seems to be to quit and restart and reopen the project. Then it works temporarily for a little while but not long enough to actually edit. I have done projects in Premiere with C100 footage in the past and have not experience this level of difficulty.
My Media Cache is not going to the startup diskc(it is gong to the right place)
I am on a Mac 2.66 Ghz Quad-Core Intel Xeon
OS X 10.8.5
10GB 1066 MHz DDR3
NVIDIA GeForce GT 120 512 MB
Please help - very frustrated. If the solution is to transcode, it sort of kills the value of premiere in many ways.

Hi,
This might help :
Go to File > Project Settings > General and change the Video Renderer to Mercury Playback Engine software only. Click OK and select Delete Previews.
Thanks,
Rameez

Performance Issue Premiere Pro CC 2014 with Late 2013 Mac Pro

Hi all!
Im working Premiere Pro CC 2014 on a Late 2013 Mac Pro 6 core D700s and 32GB RAM on OSX 10.9.4
After the 2014 update i have experience some drop frames and hangs with a new 1080p timeline project.
And it later results in software hang and crashing . even after a quit (force quit) and re-poen, it seems to happen again and again.
Even after a system reboot seems to be fine at first, but it still crashes on the project.
Tired to render the timeline and still the same. Also tried to delete rendered file and play right with timeline with yellow bar, same.
Even drop the preview playback to 1/2 and still..
files are mixed 1080p footage from Canon 5d3, 60D, T2i.
I have 3 layers (interview video with different angles) and a title layer (hard subtitle)
had some light color correction with fast color corrector and a sharpening on the 5d3 layer.
Ive work with the CC premiere pro before with mac pro and everything is fine and never hand an issue.
All my memory setting are set for performance and i have open GL on my D700s
Im not sure if this a software issue or someone my hardware is not working right?!
Thanks in advance!

I am having the same issues.
Im working on a late 2012 iMac, 3.4 GHz Intel Core i7. 32 Gb ram, NVIDIA GeForce GTX 680MX, OS X 10.9.4.
I'm editing RED footage, about 3 TB worth for this project from a Promise Pegasus drive.
The software really slows down when using the TYPE tool and also when scrubbing through footage.
When I attempt to quite the software and restart, the interface goes away but the app is still running but says "not responding" when I attempt to force quit.
If you've figured it out since then Id love to know what works.
Thanks!
G

Poor multi-camera performance in Premiere Pro CS6

I've been trying to edit my camera footage using multi-camera window and the playback is extremely choppy and slow in the viewer, so I pretty much cannot use it. Any ideas? Are there certain settings I can tweak?
I did a search and it seems like the CPU/GPU would be the bottlenecks but I believe my machine is pretty good: i7 2700k with SATA III SSD, GTX 480 and 16GB of RAM.
Thank you in advance for your help.

What driver are you on for your GTX 480?
I'm aware of a number of things that have been reported as causing choppy playback
Playback Resolution and Paused Resolution being set to full. If that's the case, try dialing back to 1/2 or even 1/4.
A high number of layers. How many are in your multicam sequence? Also, do you have any cases of a sequence containing a nested sequence that in turn contains a nested sequence?
The type of video--some are more resource intensive to decode than othters. What kind are you working with (codec and wrapper)?
Using multiple graphics cards
Effects. Which ones are you using, if any?
A slow hard drive, or using an external without a fast enough interface. (from the info you provided, that doesn't sound like a likely culprit)
It might be worth downloading the trial of Premiere Pro CC to see if performance is better in the new version. I'm not trying to sell you on subscribing to Creative Cloud. It would just be good to know if you find better performance in CC.

Need help with Multi-cam editing in Premiere Pro CC/7.0

I've been using 6.0 for a while now, and had to install 7.0/cc, but now I can't find where to record multi-cam edits. I've already lined up my clips and created a new sequence and enabled multi-cam, I just don't see the Multi-Cam Editor. Please help!

Hey!
I found the record-button in the programm panel. But now it won't let me hit record. The button is disabled (see screenshot).
What can I do about it?
If I just hit play and then change the angles in the source window, Premiere won't record those edits. Only thing it does is it keeps the whole clip in this one angle.

Help with multi camera editing in Premiere Pro

Ok I'm new...so bear with me.
I am editing a basic interview shot on two cameras and cutting away to some still images.
The rushes are 4 lots of film about 10 mins in length.
I inputted the footage from the two cameras and created a new sequence for each using the multi camera audio synchronisation method (which worked great).
So how do I go about creating my edit? Something tells me I'm going about it in the wrong way.
Do I need to create my edit using single camera shots and then create multi camera sequences for each individual clip? It seems so laborious as its all already synced up for two cameras.
I am a bit confused about creating clips v creating sequences.
I'm sorry if this is making some of you cringe :/ ....but I really can't find any help in online tutorials.
I need basic step by step instruction.

I am editing a basic interview shot on two cameras and cutting away to some still images.
The rushes are 4 lots of film about 10 mins in length.
I inputted the footage from the two cameras and created a new sequence for each using the multi camera audio synchronisation method (which worked great).
So how do I go about creating my edit? Something tells me I'm going about it in the wrong way.
Do I need to create my edit using single camera shots and then create multi camera sequences for each individual clip? It seems so laborious as its all already synced up for two cameras.
humm, sounds like your 4 lots do not overlap in time, and that there is space between each lot. So would that be 4 multi-camera sequences with the two cameras?
If so, why even multicamera edit that? and just set up to Video tracks, sync the audio and opacity keyframe between the two tracks.
Good to get your multi-camera edit workflow going proper though.
Sounds like you need to multi-camera edit your 4 sequences separately, unless you sync each lot with its corresponding clip and put on the same timeline, then do one sequence and one multi-camera edit

Rendering white flicker on the program monitor and output video file. How to get rid of this flicker in adobe premiere pro cc 2014?

Hello,
I have been working with long sequences in adobe premiere pro cc 2014. All of sudden, I see white flicker in the program monitor and rendered output too. The flicker does not follow any pattern. It is very random.
How to work around on this?
Regards
Naveen Alle

Concurrently working on the same project it requires a specific implementation in all editing programs like Avid's Unity/ ISIS shared storage. That's what you are simply not considering. none of your issues would be any problem if your projects resided on a commonly accessed server or something like that. Check respective hardware solutions.
Mylenium

Premiere Pro CC 2014 encoding issues due to graphic opacity settings?

Our marketing team has been working on some instructional video content in Premiere Pro CC 2014 and have encountered issues with encoding the completed sequences. Our output format is HD video with the H.264 codec, 1920 x 1080, 30 FPS.
The symptom of the problem is that the encoding process cannot proceed beyond 50%, and in some cases, does not start at all. Simply put, we can't encode any videos to completion.
We think we have isolated the issue, which we initially believed was due to video format differences between the two cameras used to shoot the footage. An EPS logo was present throughout the video with reduced opacity (80%). When we removed the logo, the videos began encoding properly, and to completion. When the EPS logo was included at 100% opacity, the videos also encoded properly and to completion.
Has anyone else been encountering similar issues in Premiere Pro or After Effects CC 2014? If so, what was the resolution? Is there a known issue with the opacity of graphic assets in video encoding?

I've occasionally seen problems with say multiple masks & final render-out/exporting, but I've not seen one here on a graphic's opacity causing a problem. It's a very common part of the tool-kit, of course, for most pro/semi-pro editing. Even a lot of amateur stuff.
Which leads me to wonder what would happen if you created a fresh graphic of some sort, applied it a partial & full opacity, on a SHORT clip ... just to test things. Trying to establish if it's graphic opacity in general as your problem, or this specific graphic and/or its settings.
Neil

Flicker footage in Premiere Pro CC 2014.2. Tested on different computers. When waiting for fixes this bug?

Flicker appears solely the fault of Premiere Pro CC 2014.2. Tested on different computers. Used as nVidia Quadro and GeForce GTX770. Drivers were different. Everywhere equally evident flicker. Incidentally, it defies logic and may occur at different film pieces. If re-render that flicker may occur on another spot in the video.
It can occur even in the parts without filters !!! But no all time.
ver 2014.2 - win 7 - intel i7-4770 - gtx 770 - flicker!
ver 2014.2 - win 7 - intel i7-4770 - Intel HD Graphics 4600 - flicker!
ver 2014.2 - win 7 - intel i7-2700K - quadro 2000 - flicker!
MERCURY PLAYBACK ENGINE work fine! But still flickering in preview and render.
When waiting for fixes this bug?

Hi Aleksey,
Flicker appears solely the fault of Premiere Pro CC 2014.2. Tested on different computers. Used as nVidia Quadro and GeForce GTX770. Drivers were different.
Have you tried with the Mercury Playback Engine set to "Software Only?" More info please: FAQ: What information should I provide when asking a question on this forum?
Everywhere equally evident flicker. Incidentally, it defies logic and may occur at different film pieces. If re-render that flicker may occur on another spot in the video.
Is this a brand new project or one you updated from an earlier version? What kind of footage are you exporting? Which preset are you using?
When waiting for fixes this bug?
If I can repeat the case here with the same hardware, GPU, and drivers, that would be easier to fix the bug. Currently, I cannot recreate the bug. If you or anyone else can provide me with steps to recreate the bug, that would help immensely. It sounds like this will be the difficult thing.
Thanks,
Kevin

Premiere pro cc 2014 is crashing due to after effects plugins being installed in the mediacore. Is there a solution to this issue?

The title honestly says it all. I recently purchased CC 2014 and have been updating and transferring plugins from prior versions of adobe after effects. When installing those plugins as I did in previous versions of after effects none of the plugins were recognized/loaded. I eventually found a solution to this issue by simply installing the plugins into the media core. They have all successfully loaded, but due to their presence in the media core premiere pro is now crashing upon start up. Does anyone know a work around for this?
Image showing crash:
Specs:
OS: Windows 8.1
RAM: 8GB
CPU: Intel 5 4670k
GPU: GTX 980 sc
Premiere Pro CC 2014 and After Effects CC 2014 are both updated to their most recent versions

First ... have you checked that these are all updated to work with the CC versions? I'd check with the makers of each plugin, the software has MANY differences.
Next ... if say you removed all but one, do any of them work? It might be worthwhile to remove them from the folder, then add one by one until you find one that is crashing things. That would at least get you part way forward.
And ... you might list which ones you have, in what versions. Folks around here might be able to help just seeing that.
Neil

H.264 encoding issues with Premiere Pro CC 2014

After updating to Premiere Pro CC 2014 yesterday, I see encoding artifacts on my H.264 exports.
Same source video imported into CC v2014 and v7, and exported using the YouTube 1080p 29.97 fps settings. The artifacts manifests itself as softness/blurriness in parts of the image every few seconds, especially notice the area with a red circle below.
Here are the source file (GoPro HERO3 Black Edition), the v2014 render and the v7 render.
Original: https://drive.google.com/file/d/0B2rJe0xgMTxFYXJiMjZpZ0stUzQ/edit?usp=sharing
CC v2014 render: https://drive.google.com/file/d/0B2rJe0xgMTxFQ1B0Z09GS3I0a1E/edit?usp=sharing
CC v7 render: Premiere Pro CC.mp4 - Google Drive
[Version numbers corrected.]
Message was edited by: Jim Simon

Mark Mapes wrote:
This is a known issue introduced in CC2014.0. Some h.264 encodes have blurriness or noise periodically in some areas of the frame. The problem is most pronounced in regions of the frame with very little detail, like grass or pavement--or the T-shirt in the sample frame. We are working on a fix. Before you ask when the patch will be forthcoming, I'm not authorized to even hint at the timeframe.
Unfortunately, the only real workaround is to export to a format other than h.264. If that's not an option for you, then your best bet is probably to keep working in CC7.2.2 until the patch is released.
Sorry, but thats not completely true and by far not the correct answer:
The problems with random artifacts occurred with the introduction of a new version of H264 in CS6 but there you still had the option to export with the previous H264 Version via Media Encoder.
Since the previous H264 version is not available in CC, using CC7.2.2 is not a solution either.
BTW
Updating to CC and using the new Mac Pros with Mavericks is currently a total mess - no open cl rendering, random crashes, no usable h264 ... thanks adobe!!
... but we can track masks in premiere now ... wow!

Premiere Pro CC 2014 Playback Issue / Crash Mac Pro 2011

Hi,
I've been having a big crash issue on Premiere Pro CC 2014, since the 2014.1 update.
2014.0 has been working fine this year but the update has crashed some of my biggest current projects.
Programs just starts fine, workspace responds, but anything related to playback just crashes or freezes Premiere.
My config:
Mac Pro Mid 2010
Processor : 2x2,93 6-core Xeon
Ram : 24Go 1333
2x ATI Radeon HD 5770.
I've been reading all major topics on this, this i did :
- disable Mercury Transmission
- Flushes Premiere cache
- Reinstall premiere
- Updated to Mavericks (issue happened both in 10.9 and 10.10 - thought updating drivers+opencl would help, then again no)
- Repaired permissions
- Tried with another user session
… and so on.
Nothing yet has solved my issue, anyone to help me on this major trouble ?
Thanks in advance, best regards !
Paul

Hi Paul,
Try the following:
Sign out from Creative Cloud, restart Premiere Pro, then sign in
Update any GPU drivers
Trash preferences
Ensure Adobe folder preferences are set to read/write in all 3 locations.
Delete media cache
Remove plug-ins
Repair permissions
In Sequence Settings > Video Previews, change the codec to one that matches your footage
Disconnect any third party hardware
Disable App Nap
Reboot
I placed the chief culprits in bold.
Report back if anything here worked for you.
Thanks,
Kevin

Membership expired issue!!! Premiere pro CC 2014 issue generated from this error

Hi Guys!
I have an urgent matter. I keep having this message. I have no issues with the membership since it's paid until may 2015.
Also in premiere pro cc 2014 I am having this error: this project contained a sequence that could not be opened. no sequence preview preset file or codec
I've understand that this two problems are related.
I've also searched the entire google for a solution, nothing out there works.

Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Flickering footage in Premiere Pro CC 2014 but not in Premiere Pro CC 2013

Hi guys,
I've been having repeated issues with Premiere Pro CC 2014 on Windows. Basically my footage has a weird strobe/flicker when in the suite and when rendered off even although the footage looks fine, unaltered out of the camera. I rendered off the same footage in the 2013 edition of the software and there is no flicker/strobing going on. I've included one of the worst effected shots in CC 2014 and CC 2013 for comparison.I also experience graphical glitches occasionally when rendering. Please watch below:
Premiere Pro CC 2014 - strobing (300% speed, cropped 15%, RGB curve adjustment, software rendered)
YouTube
Premiere Pro CC 2013 - strobing (300% speed, cropped 15%, RGB curve adjustment, software rendered)
Premiere Pro CC 2013 - no flickering - YouTube
The footage was shot on a Nikon D3200 at 1080p 25fps, aperture 3.5, shutter 1/50, ISO 400.
Editing on a
Dell Optiplex 9020
Intel i5-4570 3.2 Ghz
4 gb Ram
Intel HD Graphics 4600
Windows 7
Has anyone else experienced this issue? My suspicion is an issue with either my graphics card or insufficient RAM.

Thanks for posting that info. This mirrors the issues I'm seeing with DSLR footage.
It's so hit or miss if it's going to flicker. I'll delete renders and re-render and certain clips will be fine, others are now flickering. I tried to make a test project that demonstrated this issue, but couldn't reproduce the effect. RGB Curves and Three Way CC are in my list of effects, as well, where I see the issue.
Just curious, is anyone else working on projects started in other versions/computers? I've seen it on project started in PPro CC and finished in CC'14. Saw it again on a project started on Mac in FCP7, converted to CC'14 Win7. Quite honestly, I haven't been starting projects myself in CC'14 because of the flicker issues.
As a workaround, I was hoping to import the CC'14 project back into CC or Media Encoder CC, but no luck there.
Another issue I've had with CC'14 includes converting a CC project to CC'14, giving it to a CC'14 Mac user and the A/V sync is lost. We abandoned that collaboration all together because of the issues. CC'14 has been incredibly unproductive to my workflow, despite the great interface update and various other features added. I haven't had mystery issues like this since CS4. I'm keeping our post team in CC as much as possible until the issues are resolved.
-JB

Premiere Pro CC 2014 crashes when loading project file

Hi guys, any help on this is much appreciated as I have a job due in 18 hours and I'm in big trouble if I can't fix this.
I've been editing a project in Adobe Premiere Pro CC 2014 (updated to the latest version) and when I tried to access the same file today it is giving me the error message:
'Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project.'
I had saved other version files and they all seem to be working properly so I know it's not my HD that is corrupt. In fact my suspicion is that it has something to do with a blur effect i'm using. The only problem is, I can't even access the file to delete the effect as the project file won't open.
Information about my computer:
I am using a Macbook Pro
OS X version 10.9.4
2.6 Ghz Intel Core i5
Memory 16 GB, 1600 MHz DDR3
Any suggestions/comments would be appreciated.

Guys I solved my own problem - thought I'd share with you how in case anyone else is having this problem -
I came across this thread
Premiere Pro CC error message and crash
which had the suggestion -
"Do tou have after effects installed? If yes, please try to import the main sequence into it and then export it as premier pro project from file/export ootion and then try to open that in premiere pro."
This didn't work for me too but I did try and import my existing project into a new project and copy all the files over. Works fine now.
I don't know if I will have the same issue again tomorrow so I'm going to render out a super high res video before I close premiere just in case

Multi Cam Flicker Issue - Premiere Pro CC 2014

Similar Messages

Maybe you are looking for